Audio off when converting from mov to flv

I have an mov file that I am trying to convert with the media encoder, but when I run it through, it throws off the audio just slightly. I have tried converting to flv and mp4 with the same results. What is causing this? Can I fix it? I need to be able to convert the file so I can use it in a Captivate project.

I resolved the issue.  I googled the issue and the answer was right there. Turns out that one audio clip (out of dozens in the project) was somehow corrupted. A small yellow triangle was the indication.  Once I deleted that clip all of the other audio came back into the project.  I simply pasted a fresh version of that audio clip into the project and the all was not lost.

Similar Messages

  • Audio lost when converting from standard to widescreen

    I have been working on an iMovie project for about two  weeks and just noticed that there was an option for widescreen vs standard mode.  I read through the instructions and it said that one can convert to widescreen at any time in a project. I converted to widescreen and when I did I seem to have lost 2/3 of the audio in the clips. But its strange because the clips are clearly there - the ducking still works, the audio clip title are there, but there's no sound. I am hoping that there's a simply fix and that I don't need to reconstruction the movie.  HELP! Please.
    Thanks
    David Trachtenberg, Berkeley, Californai

    I resolved the issue.  I googled the issue and the answer was right there. Turns out that one audio clip (out of dozens in the project) was somehow corrupted. A small yellow triangle was the indication.  Once I deleted that clip all of the other audio came back into the project.  I simply pasted a fresh version of that audio clip into the project and the all was not lost.

  • Adobe Premiere - blurred video when convertering from MOV to AVI

    Hey!
    When I exporting my video I made with my iphone (.MOV) to .AVI then the videos quality gets worse that it should be.
    What does that depends on and what can I do to fix it?

    What does that depends on and what can I do to fix it?
    The phone. Don't use the phone to change the wrapper. Use a converter or better yet, use a video camera. Use a phone to make calls.

  • When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

    When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

    When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
    That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe.

  • No audio when exporting from mpeg to flv

    We have two PCs with Premiere Pro and AME installed, and just upgraded to CC. On one computer exporting works fine, on the other one, I'm losing the audio when exporting from mpeg to flv. I have used the same preset as on the other computer (that works) and also tried other presets that came with AME.
    I can't figure out why this wouldn't work on one but works fine on the other? Anyone who knows?

    How are you determining that the FLV has no audio?  Are you playing it back in VLC Player or importing it into Flash?
    Also, do you see a full range of formats on the system where you don't hear audio?  If some formats are missing this might be  a licensing issue.  Also check if AME recognizes audio on the MPEG source (hover over it  in the queue and look for  audio info in the tool tip).

  • My apple Tv has audio problems when streaming from my NAS server.

    My Apple TV has audio problems when streaming from my NAS server or computer and even internet. I can hear the click sound it makes when you click on the icons, but when the movie starts there is no audio. This even happens when using XBMC. I have HMDI directly to my TV suing Apple TV 2. I have tried resetting, turning off both TV and Apple TV, and changing the HDMI cable. It is driving me nuts.

    XMBC requires a hack, we cannot help with hacked devices.

  • Overflow when converting from "1.64174e+11"

    Hi ,
    I am working on PS module and facing the above mentioned error.Whenever I am attching any material haveing value more than Rs 100000 the system gives "Overflow when converting from "1.64174e+11""
    The detailed error description is given below,
    Runtime Errors         CONVT_OVERFLOW
    Except.                CX_SY_CONVERSION_OVERFLOW
    Date and Time          24.11.2008 11:19:23
    Short dump has not been completely stored (too big)
    Short text
         Overflow when converting from "1.64174e+11"
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPFV45P" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
          caught in
         procedure "KALKULATIONSWERT_UEBERNEHMEN" "(FORM)", nor was it propagated by a
          RAISING clause.
         Since the caller of the procedure could not have anticipated that the
         exception would occur, the current program is terminated.
         The reason for the exception is:
         When attempting to convert the value "1.64174e+11", an overflow occurred.
    Missing RAISING Clause in Interface
         Program                                 SAPFV45P
         Include                                 FV45PF0K_KALKULATIONSWERT_UEBE
         Row                                     8
         Module type                             (FORM)
         Module Name                             KALKULATIONSWERT_UEBERNEHMEN
    Trigger Location of Exception
         Program                                 SAPFV45P
         Include                                 FV45PF0K_KALKULATIONSWERT_UEBE
         Row                                     140
         Module type                             (FORM)
         Module Name                             KALKULATIONSWERT_UEBERNEHMEN
    Source Code Extract
    Line  SourceCde
      110       MTCOM-MATNR = VBAP-MATNR.
      111       MTCOM-BWTAR = VBAP-BWTAR.
      112       CALL FUNCTION 'MATERIAL_READ'
      113            EXPORTING
      114                 SCHLUESSEL    = MTCOM
      115            IMPORTING
      116                 MATDATEN      = MBEW
      117            EXCEPTIONS
      118                 ERROR_MESSAGE = 04
      119                 OTHERS        = 04.
      120       MOVE SY-SUBRC TO SAV_SUBRC.
      121     ENDIF.
      122
      123     IF T685A-KRECH = 'C'.
      124       IF SAV_SUBRC = 0 AND MBEW-PEINH NE 0.
      125         KOMV-KPEIN = MBEW-PEINH.
      126       ELSE.
      127         KOMV-KPEIN = 1.
      128       ENDIF.
      129 * Falls keine ET da, Zielmenge nehmen (Gut-/Lastschrift, Kontrakt ...)
      130       DATA: DA_MENGE LIKE VBAP-KWMENG.
      131       IF TVAP-ETERL EQ SPACE AND VBAP-KWMENG = 0.
      132         DA_MENGE               = VBAP-ZMENG.
      133       ELSE.
      134         DA_MENGE               = VBAP-KWMENG.
      135       ENDIF.
      136       IF DA_MENGE > 0.
      137         DA_WERT         =  DA_WERT  * KOMV-KPEIN * 1000
      138                          / DA_MENGE * VBAP-UMVKN / VBAP-UMVKZ.
      139       ENDIF.
    >>>>>       KOMV-KBETR      = DA_WERT.
      141     ELSEIF T685A-KRECH = 'B'.
      142       KOMV-KBETR      = DA_WERT.
      143     ELSE.
      144       KOMV-KWERT      = DA_WERT.
      145     ENDIF.
      146
      147     KOMV-WAERS         = DA_KALKO-FWAER.
      148     RV45A-KOEIN        = DA_KALKO-FWAER.
      149     KOMV-KMEIN         = VBAP-MEINS.
      150     PERFORM KOMV_PRUEFEN USING SPACE
      151                          CHANGING SY-SUBRC.
      152 * Nur für den ersten Lauf prüfen, ob Status gesetzt werden muß
      153     IF SAV_INDEX = 1.
      154       DA_SUBRC = SY-SUBRC.
      155     ENDIF.
    156     IF SY-SUBRC = 0.
    157       PERFORM KOMV_BEARBEITEN.
    158     ENDIF.
    159   ENDDO.
    Pl suggest.
    Rgds

    Hi,
    Try to declare your variable using Packed Number:
    DATA: va_num TYPE P DECIMALS 3.
    Hope this helps.
    Patrick

  • Grainy Image when converting from PAL to NTSC...

    Hi,
    I'm using Compressor 2.0.1 to convert a PAL movie to NTSC. I find that the output is extremely Grainy, the blacs are Muddy and the Highlights are colored.
    Any suggestions?
    Thanks and Regards,
    Rajnesh

    There are many options when converting from PAL to NTSC with Compressor's Frame Controls panel. Have you tried other settings? Note, however, that the highest quality settings are pretty slow so be prepared for a fairly long wait even on your Power Mac G5.
    Otherwise, you might want to try the freeware utility JES Deinterlacer (available on VersionTracker.com). JES Deinterlacer is pretty fast at PAL <-> NTSC conversion and the results are better than you will get with the basic settings in Compressor 2.

  • How do I get PRO to not include codes when converting from Word?

    When converting from word, I get all of the codes printed too.How do I get it to not show in Adobe?  I'm on a deadline and right now not happy that I upgraded.  Need my old adobe back!
    Board of Directors Meeting{ PRINT \p para "[
    /EMC pdfmark [ /StPop pdfmark" }
    { PRINT \p para "[ /Subtype /P /Title () /StPNE pdfmark" }{
    PRINT \p para "[ /StBMC pdfmark" }{ PRINT \p para "[ /EMC pdfmark [ /StPop pdfmark" }
    { PRINT \p para "[ /Subtype /P /StPNE

    Thanks Bill for your reply.
    I am using Acrobat XI, just downloaded it and Word 2003.  There are no punctuations on my form, I just hit return to go to the next lines. 
    I put in a little square check box and that is also causing issues.  I checked to make sure the field codes are off on the original word doc. 
    I did try from the printer to save and adobe and I get the same codes.  Other people that I work with are able to get my document to save correctly in acrobat with the same versions of word and XI. 
    It has to be some small setting on my computer. 

  • Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?

    Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?
    Depending on the system version, and Office Word version:
    - a pure URL link starting with http or even www sometimes works in PDF, either produced by Aperçu or Adobe, sometimes does not work;
    - other kind of links where the text under display is not a URL, never work!
    I like everything with Apple computers and software, except PDF generation. Output files are usually bigger in size, and no better quality, than under Windows. Furthermore, it is weird that something as common as hyperlinks does not work correctly!
    I related this question with Mac OS X Snow Leopard, but the problem is still there with Mac OS Lion.
    This problem seems to have been around for years, without any proper solution from Apple and/or Adobe! To me, this is very embarrassing!

    Greetings NoNameGiven,
    If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
    a ‘C’ student

  • How do I maintain column formatting when converting from PDF to Excel?

    How do I maintain column formatting when converting from PDF to Excel? All info is no longer on the lines or in the columns they started out being in? Any help would be appreciated.

    Sara,
    Perhaps I am expecting too much from Adobe ExportPDF. The reason I subscribed to this service, for which I pay a yearly fee, was that I need a way to  convert scanned and digital documents to Word &/or Excel. I read the link you included but to be candid the more I tried to understand what was written the more confused I got. The process should not be this difficult. Currently I am using a NEAT scanner to create PDF documents of whatever I scan. After I changed the OCR setting on Adobe ExportPDF the output was much better but not to the point it was usable as it was. Information that appears to be lines and columns are sometimes not recognizing two columns and just putting them together in one. Obviously not usable. The other thing it does is bunch numbers that appear in a column that are just a bunch of numbers that I have no way of fixing. 
    Please let me speak to someone who can help me. Right now I not getting anything of value in my paid subscription.

  • Best converter for .Mov to .Flv?

    Hi
    I need to find a video converter for .Mov to .Flv(or maybe Mp4 or mpeg).
    I found out that you cant create a playlist in .mov...so i need to convert. Youtube's conversion seems to suck though...can i get a better quality .flv conversion?
    I have a lot of videos +around 70+ that need to convert to a format with playlist functionality for mac and windows.
    Whats a good software to convert to flv.or the other format? currently my videos are 960x540.
    Help is appreciated.

    MPEG Streamclip with the Perian plug in should work.
    Both are free.
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    http://www.perian.org

  • Default PR Type when convert from Planned Order

    Hi all,
    How can I default my PR Type when convert from Planned Order after MRP run. This can done via MRP Group control but how to go about controlling via Planned Order profile?
    Which planned object type and planned order profile to be used? assuming that i need my planned to be output at LA type and convert to NB1 PR type instead of the default NB PR type?
    Thanks.
    Regards,
    Andrew

    Hi,
    The system determines the document type from the stettings u are making in "planned order Profile" in Customising for MRP. There u define the order type, the procurement key and the special procurement key and also the account assignment category. So based on the procurement key and the special procurement key maintained in the Marterial master, the document type is selected.
    Production > Materials Requirement Planning > Procurement Proposals > Planned Order > Define order profile
    Choose the planned order type - NB1 Within this you specify the P req doc type to be used.
    Through MRP group and the different PR document type for MRP generated PR is possible only if you assign the document type to MRP group in the MRP configuration.
    Please try and come back.
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on Aug 28, 2008 10:54 AM

  • Moving Scriptlet Code to backing bean when converting from JSP - Facelets

    Hello!
    We are converting our application from jsf1.2 to 2.0 and all jsps are being converted to XHTML. Some are trivial while others had very complex scriptlets.
    I would like to know what are some of the recommended ways of moving Scriptlet Code to backing bean when converting from JSP -> Facelets.
    I have thought about listeners, actionListeners, putting code getXXXX() of the backing bean and then calling #{bean.XXXX} but not sure whats the best way.
    I do appreciate the response!
    Eg of a jsp page:
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
    <%@ taglib uri="/WEB-INF/xxx-jsf.tld" prefix="l" %>
    <%@ taglib uri="/WEB-INF/yyy-pp.tld" prefix="p" %>
    <%@ page import="com.ttyy.search.beans.jsf.AdvancedSearchFormManagedBean" %>
    <%@ page import="com.kkee.util.*"%>
    <%
        AdvancedSearchFormManagedBean advancedSearchFormManagedBean = (AdvancedSearchFormManagedBean) request.getSession().getAttribute("AdvancedSearchFormManagedBean");
        if (advancedSearchFormManagedBean == null) {
           advancedSearchFormManagedBean = new AdvancedSearchFormManagedBean();
           request.getSession().setAttribute("AdvancedSearchFormManagedBean", advancedSearchFormManagedBean);
        advancedSearchFormManagedBean.initializeForAdvancedSearchOptions();
        advancedSearchFormManagedBean.setQuickSearch();
         request.setAttribute("portletHeader", "Hello " + advancedSearchFormManagedBean.getPerson().getFirstname() + ", check out the latest programs in your practice areas and jurisdictions");
    %>
    <h:form id="MYCenterForm">
         <p:portletRenderer portletSetName="test of portlet"
              portletContainer="#{PortletContainerManagedBean}"
              id="MYCenter"
              portletScope = "TEST_SCOPE"
              suppressIfNoData="true"
              portletSkinName="SOME_SKIN">
              <f:facet name="persistenceToolkit">
                   <h:commandLink id="persistenceToolkitLink"
                        actionListener="#{PortletContainerManagedBean.persistPortletSetStateListener}">
                        <h:outputText value="Save State Of Portlet Set" id="persistenceToolkitLinkText"/>
                   </h:commandLink>
              </f:facet>
         </p:pagePortletSetRenderer>
    </h:form>
    <%
         String flag = PropertyItems.getInstance().getPropertyItem("response.time.flag");
         if("1".equals(flag)){
              ResponseTime rt = (ResponseTime) session.getAttribute("responseTime");
            if(rt!=null){
                rt.setDesc("my cle loaded");
                long now = System.currentTimeMillis();
                long start = rt.getStart() + rt.getTotal();
                rt.setInterval(now-start);
                rt.setTotal(rt.getTotal()+rt.getInterval());
                LogUtil.log(rt.toString(), LogUtil.DEBUG_LEVEL);
                session.setAttribute("responseTime", rt);
    %>

    That helps.
    This could be another topic question but itst kind of related to what i am doing right now. while converting JSP to facelet (in jsf2) I came across another issue.
    <h:commandLink id="Save" rendered="#{RegistrationBean.isNOTInOrigionalRegistrationMode}" action="#{RegistrationBean.updateProfile2Submit}" styleClass="#{portalSkinManagedBean.contentPortletSkin.strongTextStyle}">
              <l:htmlSkinnedImage id="SaveImage" style="border:0;" url="save.gif" alt="Save Information"/>
    </h:commandLink>When I click on the generated link, I get this. And this is happening for all the h:commandLink in the application.
    http://localhost:9080/registration/updateProfile2.jsf[request.getQueryString()=null][request.getRequestedSessionId()=F1CCE237DD81D301F1C4DBA6910FFD8A][request.isRequestedSessionIdFromCookie()=true][request.isRequestedSessionIdFromURL()=false][request.isRequestedSessionIdValid()=true]Parameters:[rolePracticeAreasForm:title=rolePracticeAreasForm:primaryPracticeArea=10002javax.faces.ViewState=-2943345291093118815:-4400303399130292206rolePracticeAreasForm:practiceAreasMod2=10148.1rolePracticeAreasForm:practiceAreasMod1=10002.1rolePracticeAreasForm:Save=rolePracticeAreasForm:SaverolePracticeAreasForm=rolePracticeAreasFormrolePracticeAreasForm:otherField=rolePracticeAreasForm:fromMyAccount=1]||
    javax.servlet.ServletException: Index: 0, Size: 0
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:325)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at com.legaledcenter.util.urlrewrite.UrlRewriteFilter.doFilter(UrlRewriteFilter.java:250)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.springframework.orm.hibernate3.support.OpenSessionInViewFilter.doFilterInternal(OpenSessionInViewFilter.java:198)
         at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at com.jscape.framework.galileo.support.upload.UploadFilter.doFilter(UploadFilter.java:71)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
         at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
         at java.lang.Thread.run(Thread.java:619)
    Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
         at java.util.ArrayList.RangeCheck(ArrayList.java:547)
         at java.util.ArrayList.get(ArrayList.java:322)
         at javax.faces.component.AttachedObjectListHolder.restoreState(AttachedObjectListHolder.java:161)
         at javax.faces.component.UIComponentBase.restoreState(UIComponentBase.java:1427)
         at com.sun.faces.application.view.StateHolderSaver.restore(StateHolderSaver.java:121)
         at com.sun.faces.application.view.StateManagementStrategyImpl$4.invokeContextCallback(StateManagementStrategyImpl.java:289)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1253)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
         at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
         at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
         at com.sun.faces.application.view.StateManagementStrategyImpl.restoreView(StateManagementStrategyImpl.java:284)
         at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:177)
         at com.sun.faces.application.view.ViewHandlingStrategy.restoreView(ViewHandlingStrategy.java:119)
         at com.sun.faces.application.view.FaceletViewHandlingStrategy.restoreView(FaceletViewHandlingStrategy.java:434)
         at com.sun.faces.application.view.MultiViewHandler.restoreView(MultiViewHandler.java:143)
         at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:199)
         at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
         at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:110)
         at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118)
         at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
         ... 22 more
    ********** Message End *************Thanks

  • Overflow when converting from "3.60001e+11"

    Hi Guys,
    I'm Working with my PO using MIRO, I don't know why the error occurs. I've used the SAP Version 620 but end up with an error, then used Version 710 and successfuly created the transaction, but I'm stacked with version 620. I'm not allowed to transact it using the Version 710 that's why im looking for a patch or upgrade within 620 that i can use so that it can be solve.
    I'm in need of your help guys. I know there someone out there that can help me.
    THE ERROR
    Runtime Errors         CONVT_OVERFLOW                                              
    Exception              CX_SY_CONVERSION_OVERFLOW                                   
           Occurred on     03/28/2011 at 01:00:47                                                                               
    Overflow when converting from "3.60001e+11"                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLEINS" had to be terminated because one of the        
    statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                                                               
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail below     
    . The exception, which is assigned to the class 'CX_SY_CONVERSION_OVERFLOW', 
    was neither                                                                 
    caught nor passed along using a RAISING clause, in the procedure             
    "DISTRIBUTE_ACC_ASSIGN_RE" "(FORM)"                                         
    Since the caller of the procedure could not have expected this exception     
    to occur, the running program was terminated.                               
    The reason for the exception is:                                             
    When attempting to convert the value "3.60001e+11",                          
    an overflow occurred.                                                        
    How to correct the error                                                                               
    The exception must either be prevented, caught within the procedure   
    "DISTRIBUTE_ACC_ASSIGN_RE"                                           
    "(FORM)", or declared in the procedure's RAISING clause.              
    To prevent the exception, note the following:                         
    If the error occurred in one of your own programs or in an SAP program
    that you modified, try to correct it yourself.                                                                               
    You may able to find an interim solution to the problem               
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:

    I won't post here if i already got the answer in SAP notes. I've spent 3 days searching for the answer. The only answer i got is the upgrade but can't be consider. OSS notes didn't provide me any answer. Hope u can help me
    Edited by: docgon on Mar 30, 2011 2:38 AM

Maybe you are looking for

  • Styling a single webpart in SP

    How can I accomplish something like the newsfeed/social example in the link. http://blog.creative-sharepoint.com/2013/06/5-features-for-your-sharepoint-2013-intranet-homepage/ I would like to style only one webpart, not all on a page. I've read somet

  • JDBC Receiver: exact SQL statement

    Hi, I'm in an IDoc-JDBC scenario, using XML-SQL messages to feed a JDBC Receiver and I am getting <i>weird messages</i> returned by Oracle. Question: is there a way to log/trace/audit <b>the exact SQL statement</b> that my channel is sending to Oracl

  • How to edit Table RSR_PREC_TIMEOUT

    Hello guys, we are using broadcaster and want to set a timeout for workbook calculation. To do this SAP recommends to enter workbook ID and the Timeout time in minutes into table RSR_PREC_TIMEOUT. In se16 i can do this to enter a value. But in Accept

  • Read file stored in MIME folder

    Hello I have a word(.doc) file stored in MIME folder in webdynpro java.while clicking the filedownlad UI,I need to read this file from the MIME folder.I heard we can use binary chache and WDURLGenerator.Can someone please send me the details how to d

  • Problème avec le Project manager

    Bonjour J'ai un problème avec mon project manager sur mon premiere pro cs6 (version 6.0.5) je n'arrive pas à faire une sauvegarde de mes projects. J'ai pas trouvé une réponse claire à ce sujet. merci d'avance Réponse en Français, Anglais et Portugais