Audio on button rollover problem

Very very weird problem as I have six buttons in an Edge project all have the correct audiomp3 and ogg files dragged to the stage.
4 of the files play perfectly on mouseover but two do not.
I already did the obvious:
re did the files
re imported under a different name
pulled the problematic audio and inserted that with different buttons in ANOTHER test file and STILl either the audio plays once and thats it or it plays once and then plays backwards on another mouseover.
If I have to I can upload a file as this kinda stuff really irks me.
Can I upload  the file?
R

FIXED IT!! Both the button image and rollover image were
saved as Buttons. Converting the rollover image to a Graphic solved
the problem. Now when I click my Pig, he turns into a juicy ham.
(Get it?) :)

Similar Messages

  • SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

    JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
    The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
    I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
    The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
    Karen

    OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
    HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
    Thanks anyway! Any comments or advice will still be appreciated.

  • Multiple button overlapping problem

    I am making a map of the USA with a few of the states highlighted. Each of these highlighted states is a separate button. When each button is hovered over, the state image is enlarged.
    Heres the problem: I want each hovered state to appear in front of everything else. Right now, buttons arranged above the hovered button are covering the hovered button's enlarged image. I need each button to appear on top when hovered over.
    How do I create the effect I want, having different states that enlarge when hovered over? All of these buttons will also have hyperlinks, not sure if that changes anything.
    Thanks in advance!

    I am working with as2 because it seemed less complicated for what I am trying to create...
    So I have been trying to get swapDepths to work. I found code to make it work with buttons, and at least that part seems to be successful (I am getting results when typing in actions) but I can't get it to do what I want it to. Basically I just don't know what I'm doing. Does each button need its own layer and action applied to its layer? Or do I apply actions to the buttons?
    any resources that teach swapDepths? I dont understand why its so hard to find this stuff. adobe's 'help' doesn't help, my 'flash for dummies' doesnt help, and i can't find a good site for help
    All I need is to figure out how to control the depth of the buttons' rollover states. I want each rollover image to only appear when rolled over (one probly I've had is that the rollover won't go away once it appears), and I want the rolled over image to appear above everything else.
    Thanks again

  • Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM) Options

    I have been trying for 3 days to fix this issue & I even had Bicrosft tech support on line remote PC acces take control of my PC, and still can't get the sound to work!
    Does any one know how to fix this issue? DEFINITIVELY? 
    IDT High Definition Audio CODEC (NO SOUND PROBLEM)
    ‎03-20-2013 05:24 AM
    My PC info is:
    Manufacture: Hewlett-Packard
    Model: HP EliteBook 8460p
    Rating: 5.3 Windows Experience Index
    Processor: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz      2.50GHz
    Installed memory (RAM): 4.00 GB (2.98 GB usable)
    System type: 64-bit Operating System
    Pen and Touch: No Pen or Touch Input is available for this Display
    Windows 7 Professional
    Product ID: 00371-OEM-8992671-00008
    Problem: I was watching a movie a night before, and I muted and forgot to turn off my laptop, today I found out the sound did not work, so I tried restarting and still no hope, i tried disabling and enabling the IDT High Definition Audio CODEC and still no hope, windows says that this device is working properly, but oviously its not I really need help, I dont know anything advanced about technology yet, so im helpless.
    T
    Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM)
    ‎03-20-2013 05:28 AM
    I also tried leaving the Laptop to cooldown for about 3 hours and still no sound.
    DavidPK 
    Re: IDT High Definition Audio CODEC (NO SOUND PROBLEM)
    s
    ‎03-20-2013 05:40 AM
    Hi,
    Try the following.
    Download the IDT Audio installer on the link below and save it to your Downloads folder.
    ftp://ftp.hp.com/pub/softpaq/sp59001-59500/sp59291​.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow thisand then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery and plug in the AC Adapter.
    Start the notebook and let Windows fully load - it will automatically load an audio driver, but just let this complete.  Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, right click the speaker icon in the Taskbar and select Playback Devices.  Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
    Regards,
    DP-K

    Hello DesertWildcat,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having and issue with your HP EliteBook 8460p's audio not working. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Audio play button obscured

    <blockquote>Locked by Moderator as a duplicate/re-post.
    Please continue the discussion in this thread: [/forum/1/745374]
    Thanks - c</blockquote>
    == Issue
    ==
    Firefox is having problems with certain web sites
    == Description
    ==
    Audio play button obscured
    == URL of affected sites
    ==
    http://cknw.com
    == Firefox version
    ==
    3.0.1
    == Operating system
    ==
    Intel Mac OS X 10.5
    == User Agent
    ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.0.1) Gecko/2008070206 Firefox/3.0.1
    == Plugins installed
    ==
    *-Netscape Navigator Default Plug-in
    *Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Java Information.
    *Shockwave Flash 10.1 r53
    *The Flip4Mac WMV Plugin allows you to view Windows Media content using QuickTime.
    *The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.
    *4.0.50401.0
    *Office Live Update v1.0

    Hello.
    Although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
    As for your problem, hopefully this support article is what you need:
    http://support.mozilla.com/en-US/kb/Websites+look+wrong

  • Play diffenrent audio on different rollover captions on one slide

    Help!!! I currently have 6 rollover caption on one slide and
    I assign complete different audio files to each. But when I preview
    it, all the rollover caption plays the same audio of only 1 out of
    6--is there a way to have each plays its own audio?
    I also tried replace one of the rollover caption with
    rollover slidelet with a text caption and audio-- it didn't change
    the situation at all.
    Thanks!

    In Captivate version 3 the audio can be added to either the
    rollover area, or the rollover caption. Do NOT add audio to the
    rollover area. Add it only to the rollover caption. If audio exists
    at all on the "rollover area", remove it and add it instead to the
    caption.
    To reiterate, add audio to the Audio tab for the object, not
    the rollover area. And keep in mind that the rollover object (the
    caption) is NOT on the timeline ... only the "area" is shown on the
    timeline, so you will have to go to the object on the stage and
    open it to add audio. Hopefully that will help solve your problem.
    Welcome to the posters of the Captivate user community,
    smokingcat!

  • Button Rollover keeps shifting on hover  - Firefox only

    Hi there,
    I have a shopping cart button rollover that keeps on shifting
    a few pixels whenever you roll over it. Strangely, this only
    happens in Firefox. The page can be
    found here
    The button is being called from a template .
    located
    here.
    I also tried putting the button directly into the original
    page, just to see if it was a problem with the template, and it
    still shifted.
    Any ideas?
    * EDIT *
    I think it was an extra <tr> tag floating in the table.
    However, now I'm getting an error in IE although it renders fine.
    Sigh.

    Have you considered using "set text of layer" (could be "set
    text of
    container")?
    "Jesse Feyereisen" <[email protected]> wrote
    in message
    news:gc0fue$73o$[email protected]..
    > Im sure this is Dreamweaver 101 but I just cant seem to
    find it. Im a
    > graphic
    > Designer new to Web so please bare with me. Here is what
    I need to do"
    >
    > I would like to make rollover buttons that when you
    hover over them with
    > the
    > mouse, not only does the button change (the rollover
    part), but they also
    > can
    > hide/unhide a separate image that is near them. I've got
    the rollover
    > part
    > down no problem, but the 2nd image thing is stumping me.
    >
    > Example:
    > Image of a TV on the webpage that when you roll over the
    "channel"
    > buttons,
    > they highlight AND the image on the TV screen changes to
    show and example
    > of
    > that specific channel.
    >
    > Any help is greatly appreciated.
    >
    > Thanks, Jesse?
    >

  • How to use one button rollover symbol to create 100 graphically different buttons

    I do know how to create a button rollover symbol.
    I don't know how to make that button rollover symbol reuseable. I'd like to put 100 different images in 100 copies of the button. I'd rather not make new symbols for every button, since the rollover animation may change.
    Symbol "Accessibility" allows the title to be changed for copies of the symbol. Does similar functionality exist for bitmaps used in the symbol?
    Could the copied button bring in new graphics from the timeline in another symbol or a xml sheet?
    Any help would be greatly appreciated. I've been following tutorials, except none of them cover this situation.
    Thanks for your help!

    Created in EA version 3:
    I have 2 samples for you that are very similar.
    1- uses the symbol with no image and loads the image as a background-image for the div.
    https://app.box.com/s/co7uki3fm3b11a3o1xjw
    2- uses an image in the symbol and replaces this image with a new one in the img (not div)
    https://app.box.com/s/3ms92f5cv0mylspsi5uo
    Choose what you prefer.
    3. An example with more elements in the symbol directly on the stage instead of a container. use a container if you want to place the symbols in a specific rectangle div for example.
    https://app.box.com/s/y92bpo82kncxnn2w567y

  • IOS 6.1.3 WIFI button disable problem on iPhone4S - It is definitely a BUG

    Hi Apple Fans
    I have a full house of Apple products from iPhone -> iPAD -> iPod -> Mac -> AirPort, and I am suffering from WIFI button disable problem after upgrade to iOS 6.1.3, without any clue after calling Apple Support, factory reset and reload iPhone for more than 10 times.  I also try all tips on Apple Support Communicties except put it into a freezer, still no any luck.  Apple Support suggests that my iPhone may be factly!
    Tonight, I can get my WIFI back in below sequence:
    1. Switch to English language from Chinese
    2. Turn Cellular Data Option to off
    3. Reset Network Setting
    After the phone reset, the WIFI row show 'Not Connected', and I can select my home WIFI (Airport Express) without trouble.  To prove my finding is workable to all case, can you try the same and update here if it works for you?
    Good Luck!
    PS: I always believe it is a BUG.

    Hi,
    I sympathise with you as my iPhone 4s is 7 months old and is also greyed out.  I tried everthing except the potentially stupid one of putting the iphone in a freezer!  I took the phone back to the vendor who sent it away and repaired it.  But alas after a month it is greyed out again.  I have again returned to the vendor and he will repair it again.  I asked him how and he told me it is a software conflict and he has to spend around 9 hours downloading a patch repair.  Apple are aware of this issue and I feel completely let down because they have not posted a fix on the net.  Presently I am living and working in Dubai, back in the UK I am sure my iPhone would have been exchanged for a new one.  I need my iPhone for my work and cannot afford to just buy a new one so I have been let down and despite for years being a supporter of Apple and their products I shall think twice before investing in any more Apple products.

  • Standard button image problem

    Hi,
    I've got a problem when I try to set Image to the button from standard components.. I can set it up, but than I didn't see the image in the browser.
    With the button from basic components there is everything working fine, unfortunately I need that component from standard.. any advice?
    thx.

    Hi,
    I've got a problem when I try to set Image to the button from standard
    components.. I can set it up, but than I didn't see the image in the browser.
    With the button from basic components there is everything working fine,
    unfortunately I need that component from standard.. any advice?
    thx.Standard button has problems with images due to a JSF issue. To work around the issue, remove leading / from the buttons image property and re-deploy. This should cause the standard button image to display correctly.
    Hope it helps,
    Lark

  • Facing duplicate button press problem.

    Hi,
    I am a beginner to JSF technology. I am working on a project that uses JSF 1.1 specification. I am facing "*duplicate button press problem*". Most of the links and submit buttons do not respond. With a lot of search I found that this problem was fixed in JSF 1.2.
    I want to know whether upgrading to JSF 1.2 will work or not ? Also will it require code changes in existing code or simply upgrade will do?
    - Sax

    I'm not sure why you are focused on 1.1 vs 1.2 on this issue. For both versions you need the POST-REDIRECT-GET pattern, facilitated by the <redirect/> directive in the navigation rules.

  • PCI Express X-FI Xtreme Audio - Mic and mixer problems

    6PCI Express X-FI Xtreme Audio - Mic and mixer problems' Trouble started two days ago when I updated to the latest X-FI drivers. Now I have no mixer and I can't figure out how to get my mic to work. The only thing that has changed is the updating of drivers. I am using senheiser headphones with mic for use on ventrillo. In the old set up I could go into the mixer and tell the software that the Line-In was a mic and it would work perfectly. Now I can't get the mic to work at all since there is no creative mixer. The windows mixer doesn't allow you to do anything worth wild.
    I don't have the old software so I can't go back to the old setup. I am using Vista 64. What the heck am I doing wrong? Why won't the software now recognize that I am plugging in a mic!?!?!?
    BAH!!!!
    PLEASE HELP!

    Doesn't Vista have some sort of automatic checkpointing feature that gives you a way to back up to a point before you updated the drivers?
    -Dave
    ?[email protected]

  • Audio stuttering dropouts-capture problem

    Problem: Intermittent audio dropouts when playing back a capture
    from within FCP. It can be fine for many minutes, and then sections
    where the audio sounds like quick and repeated missing information—
    like a CD that is skipping. The video always looks fine, even in
    these problematic sections
    My equipment: Powerbook G4 17”, 2megsRam, FCP 5.04. OSX 10.4.7,
    Cannon XL2 camera.
    In order to solve, we just bought from Tekserve: G-Raid 500megb,
    hooked up to the internal firewire 800 port, and a new Iogear
    Firewire Cardbus adapter—so the camera can be hooked up to this
    separate Firewire bus.
    Software settings: the video tape (miniDV) was shot in 30p mode. I
    have duplicated the FCP stock DV NTSC preset settings, and duplicated
    them so that the scanning is set to Progressive, instead of
    Interlaced. This is the only change. The camera was set to just
    record channels 1&2 (as is the FCP capture presets), so it is not an
    issue of the channel 3&4 audio.
    The audio plays back fine from the camera itself. It is just the FCP
    capture that has the problem. No other devices were hooked up to the
    laptop at the time of capture, except for a wireless Microsoft
    Mouse. The problem does exist even after we transferred a copy of
    the media files to another computer—so it is the file itself.
    Any thoughts?

    Thanks for your suggestion, but I’m afraid it didn’t help. A render-only Mixdown of audio still had the problem. In fact, you hear the problem consistently at he same place on the master captured file, playing in the viewer. It seems to only happen on long master clips. (I typically capture in 15 minute blocks, then subclip from here). To solve the problem, I have been creating another subclip of the problem area, making it offline, then recapturing just this small clip where the problem lies. I’m missing my work deadlines because of this.
    Any other ideas? Could it be my camera—which is still fairly new—needs a professional cleaning? Could it just be a problem with Canon and Firewire? Would a Powerbook Pro help?

  • Realtek high definition audio has a driver problem in windows7(32bit)

    Hi...
    I am installed realtek hd audio drivers in windows7 32bit for no sound(red x mark at sound icon taskbar). Its installed successfully, but it showing error like.. 'realtek high definition audio has a driver
    problem'.
    Please help me! how to fix the problem(Intel P4(Model-D101GGC)).
    Thank u

    The support page for Intel D101GGC Desktop Board is here:
    http://www.intel.com/p/en_US/support/highlights/dsktpboards/d101ggc
    The audio driver listed is the Realtek ALC Audio Driver. You can download the Vista/Windows7 driver here:
    https://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2229&DwnldID=19472&lang=eng&iid=dc_rss
    Is this the driver you are having problems with? If not, suggest you uninstall current non-functioning driver package and install this one instead.

  • Button rollover animation repeats

    I have an animation for a button rollover that is repeating
    after the mouse is released. Is there a way for me to stop this and
    have the animation play on the rollover only?

    Thanks again. I'm getting closer! I used to have 2 rollover
    repeats. The first was as you left the current page, the second
    just after arriving at the new page. The on(rollOut) got rid of the
    second one, but I still have a repeat immediately after release.
    AmI putting the code in the right place? Here's the action script I
    have for the button:
    on (release) {
    gotoAndPlay("HoAbout");
    on(release){
    _global.btnVar = true;
    on(rollOut){
    _global.btnVar = false;

Maybe you are looking for