Audio on last slide after quiz questions not playing

Captivate v5.5
I have a project with a question pool and a series of random questions
The random question slides are without audio.
After finishing the question pool the project closes with the final slide which does have some audio - which runs fine when I test the slide.
However when I test the whole project (F12) the audio on the last slide does not play.
The audio on the slides prior to the random question slides plays without any problem.
Any ideas please?
Noel

Anjaneai,
Thanks for the suggestion. But changing the question setting to infinite attempts will just allow the user to retry each question over and over until they get it correct. I want to give them one chance to answer each question for the entire quiz. Then, if they don't pass, they can try the entire quiz again.
I ended up finding a resolution, though. Based on one of the suggestions from this blog, I just shortened my slide time for each question to .5 sec (it was originally 3 sec). That seemed to do the trick!
http://blog.icslearninggroup.com/2011/12/adobe-captivate-quirks.html
Kristin

Similar Messages

  • Quiz questions not playing

    I have published a file that has two quiz pools playing in it.  When I try to play the swf file the quizes don't show.  There are just blank screens where they should be.  I see that they have separate swf files.  What do I need to open to make this run correctly?

    Hi there
    How are you viewing? What version of Captivate are you using? I think this is a common issue if you have Flash Player 10 installed and you are using Captivate 3.
    Click here for more
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • HT203167 I bought two audio books on iTunes but they will not play. My old books play without issue but the new ones do not.

    I bought two audio books on iTunes but they will not play. My old books play without issue but the new ones do not.

    Did you copy your actual iTunes content from your computer before reinstalling iTunes, or did you just copy your iTunes library which only contains the pointers to your songs / books locations ?
    You might, depending upon your country and if they are still in your country's store, be able to redownload your music purchases and your ibooks via the Purchased link under Quick Links on the right-hand side of the iTunes store homepage - you will need to delete the entries from your library (where you are getting the 'unable to locate' messages) before they will potentially show with the cloud icon against them in Purchased for redownloading.
    Or copy them from your backup of your downloads/library and add them to your iTunes library via File > Add To Library

  • HT204394 How do i add audio to a single slide, not using soundtrack on ipad? but having new audio for each slide, on the ipad (not mac)?

    How do i add audio to single slide on keynote, not using soundtrack so i can have new sound on each slide controlled by my click? Have ipad so cannpt drag from itunes i dont think.

    Troubleshooting Apple Mail
    What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages

  • After the last firefox updates I can not play videos in the browser. I have updated the plug-ins all to no avail

    I have tried running the videos on the BBC website and they time out after 20 sec. with the message "The content doesn't seem to be working. Try again later" all plugins are up to date, and the cookies are not barred
    == This happened ==
    Every time Firefox opened
    == after last update

    Videos from all three sites play fine for me (except the ones from tfl.fr that are only available if you are in France), so something is not quite right with your system. However bear in mind that some of them take a while to load.
    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
    (You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
    You should also ensure that you have downloaded and installed the correct version for your Mac of Security Update 2009-001 (and for Tiger only, 2009-002 and 003). (N.B. Security Updates require both a restart and a permission repair.)
    You should also install Perian from http://perian.org/
    You should read this support page http://perian.org/#support in case you need to delete older codecs.
    In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
    Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
    Lastly, repair permissions and restart your Mac.

  • Captivate 7 - quiz questions not showing tick/select boxes on ipad

    I'm having an issue when testing a course on ipad, on the question slides the radio buttons/tick boxes don't show. The module also doesn't show which answer you have selected. The course works fine across other browsers on desktops (both PC and MAC).
    I've checked the HTML5 tracker, and there are no reported errors. The questions are default captivate multiple choice question.
    Thanks,
    Chris.

    I have installed the 7.0.0, patch upgrade to 7.0.1.237, and instead of using the Master Slide I have uploaded a white background image. Within the properties tab>general, I have checked the project background option and uploaded my background image. Both Master slide objects on top and Use master slide background are unchecked.
    I have uploaded my module to Moodle 2.5, and tests have gone well on all desktops and all browsers. Only the last slide contains any interactivity, and has checkboxes and a submit button to confirm their attestation of completion. However, when tested on an iPad, this one slide that contains the check boxes and submit button appear white/or blank. Would anybody have insight into this issue?

  • After last uppgrade, Quicktime Pro will not play audio on my avi movies.

    After last update, I will not get the audio on my old .avi movies. Does Anyone else have the same problem?

    That actually did the trick. Well played. It would be nice if that were in *any* of the support documentation for AirPlay.
    Many thanks.

  • Quiz Question not to be marked???

    Hello..
    I have created an elearning module with a few question slides... a couple of true/flash.   So we are not worried about recording the results... just that they finished.  So i do i tell it not to record the answers for the quizzes???
    Rich

    Hello...
    Thank you for the suggestion of using Complete/Incomplete, Slide views only.  That work great.  It is funny.. so when i tested the course..  I went through the whole course and answer all the questions correctly.. i got the score of "Successful 100%".... but when i went through the course and answer at least of the questions wrong.. i got the score of "Completed".
    Why is that???
    Rich

  • QT audio and video clips on web site not playing

    Hello,
    I recently did a clean new install of Leopard 10.5.8 and since then there is a site I used to go on that played QT video and audio clips just fine, but now, although the QT symbols are present, neither the audio or the video clips operate.
    The clips used to just load on the site automatically and they would operate when I clicked on PLAY before I did the new install.
    I've downloaded the latest QT Player, Version 7.6.2 (518).
    Here is a sample page, it's a Japanese language learning site - when I open this site I can only see the QT symbols where the video and audio clips usually load - but you will probably see the actual clips load just fine if your system is working OK.
    http://www.dartmouth.edu/~kanji/kanji0301.html
    It's a great site when the clips are working but it's not so useful when they don't.
    I've written to the site's webmaster - they don't reply - tho' I don't think it's anything wrong with the site since it only went wrong after I did a new OSX install, I think there's a switch somewhere on my system that needs activating.
    Can anyone help me get these clips working?
    Thnx a lot.
    Ann

    You going to some how get in contact with the site's webmaster. I know you said you tried but the webmaster can only answer your question about the Qt videos. I tried to load the URL for the video into the Quicktime Player and all I get is ... The URL is not valid alert box. I even tried it in Firefox, didn't work.
    It the site that's having problems and not something on your part. Installing your OS didn't cause this...
    Message was edited by: David M Brewer

  • 2nd Audio track from merged .m4v files does not play on iPod Touch

    I used Handbrake to encode two .m4v files of a concert DVD that spans two DVDs. I then took those two files and combined them into Quicktime Pro to create a single .m4v file. The file plays fine in QT but when I transfer the file to my ipod, only the first audio track (from the first file) plays. Once the video from the second file plays, the audio is silent. Here's what the movie properties look like:
    Enabled Name Start Time Duration Format
    ====================================================
    Y Video Track -- 0:00:00:00 -- 2:21:53:90 -- H.264
    Y Audio Track1 -- 0:00:00:00 -- 2:21:53:90 -- AAC
    Y Audio Track2 -- 1:27:28:87 -- 0:54:24:02 -- AAC
    N Text Track -- 0:00:00:00 -- 2:21:53:90 -- Text
    Any suggestions?
    Thanks,
    Dan

    So basically, anytime I combine more than one mp4 file in QT7 Pro, it will always create multiple audio tracks when doing a simple "save as" (vs. export as)
    Not exactly. QT has it own set of rules. As you noted, the video track had no problem merging into a single track. This would not have happened if you had merged video compressed differently or added an image/stretched image sequence. Not knowing your specific work flow or settings, I hesitate to make any claims here. Frankly, when merging audio, I normally prefer to use GarageBand when I want to create a single master audio track and still retain control of the other tracks for mixing purposes. However, I could just as well have exported the audio in the original file using QT Pro to a single audio file and used that audio track to replace both original tracks keeping both the original video and chapter tracks. It is all a matter of which work flow you consider easiest for a particular job or project.
    If I've exported out my chapter file as a plain text file, how do I go about reintegrating that withing the final mp4 file using QT?
    http://www.apple.com/quicktime/tutorials/chaptertracks.html
    The above link is a somewhat old tutorial explaining how to create a chapter text track from scratch. Since you already have the chapter track, just refer to the steps indicating how to add the text file back to your main movie file. (Ignore the step that says to set a "Preload" option as this pop-up has been removed.)

  • HT5071 I bought an audio books from the Istore, but can not play it on my Iphone. Why?

    can i play an audio book on my IPhone?

    Of course you can. Time for troubleshooting http://support.apple.com/kb/HT2045

  • Quiz questions will not retain format when question is changed.

    OK forum folks. I'm working on my first e-learning project and have ran into a problem with question formating. The instructions/help basically tell you to click here and click there. I can easily figure that out. The questions I seem to have are quite a bit deeper.
    I have a predefined template which is company approved. I have created master slides in the question pool for both a 4 item match and a 5 item match (I have found if I add a line to the 4 matching line quiz the line spacing and formatting changes). The placeholder questions are essentially non-questions.
    I duplicate the master slide in the question pool to maintain the original format (spacing, location, etc.).
    I change the placeholder questions on the duplicated slide to the real question (slide is still in the slide pool)
    The formatting (font, spacing, locations, etc.) change on the new (edited) questions and require reformatting.I have also tried copying the master question slide to the filmstrip and editing the copied slide questions in the filmstrip. I receive the same results.
    Is there are way I can create masters in the current format so I can use the approved templates, edit the questions and not have to reformat the slide after the questions have been changed?
    Also, is there a way to lock the formatting of the questions? If I want to add/delete a new question or line to the slide, it would be great to be able to not have to reformat the slide for the change.
    I look forward to your answers.
    Thank you.

    I am trying to deal with the same issue. The master slides are more about background elements and navigation buttons, but they do not seem to allow for the addition of quiz elements.
    I have come up with a workaround that I hope will work. What I am doing is creating a new project that becomes my quiz question layout library (Let's call this Project 2). In this project I add the various types of questions I will be using in my project (multiple choice with three choices, multiple choice with five, true/false, etc...). I get all the quiz elements in place for each type of question (the header, question, submit/clear buttons, review area, etc...).
    These slides serve as my Master slides for my actual project (Project 1). I can copy and paste the appropriate layout from Project 2 to Project 1 and then change the questions themselves.
    I am sure I will find out the downside of this soon enough...
    There is no doubt the creation of masters for quiz questions needs work, actually it needs just to exist!

  • BUG?! "Last Slide Viewed" in Flash Export NOT WORKING!!!

    Am I missing something? In Keynote, I create an object, assign a hyperlink to "Last slide viewed" and export the file to Flash/SWF.
    Lo! Behold! The "Last slide viewed" hyperlinks are not working! I tried it on objects AND text, but nothing works.
    Do you know a work-around or is this a hard bug?
    I don't have to tell you the whole project is getting ready to be flushed...
    Thanks in advance for any help!

    I wouldn't call it a bug, more like something Apple just didn't implement. I mean, I have to wonder how hard it would have been to write a flash file that itself (not Keynote) tracks where the viewer is and remembers their last "slide"
    Personally, I think the flash export on Keynote should NOT be one of its selling points. If you need a serious flash movie, it's best to just use flash.

  • What happens to the closed captions when you delete a video or audio from a slide? (Captivate 7)

    This might be a silly question but ...
    I have a presentation with audio voiceover on every slide and videos on some. I have entered closed captioning for all of them. This is a pretty time consuming job.
    What happens if I run into a problem with a video or audio clip and need to replace it? If I delete that audio or video from the slide, what happens to all the closed captioning that you added to it? I'm assuming it's deleted when you delete it from the slide.
    If I export the captions before deleting the audio/video file, can I then reimport them when I replace the audio/video file with a fixed version?
    Thanks for any clarification.

    Hi there,
    You can have CC with Slide audio and Multi Slide video in Captivate.
    If you will delete the slide audio or Multi slide Video, then CC will get disabled on that slide, but same CC text will retain there as Slide notes.
    Now, once you will re insert the audio or multi slide video you can mark that slide notes as CC again, or can have new CC.
    So, even after deleting the audio and multi slide video, CC will not be deleted.
    check following section in Captivate:
    Thanks.

  • Captivate 5 - Text Animation Does not Play on Slide 1 Only

    I am using Captivate 5, updated to 5.0.1, with Windows XP, SP 3. Publishing as Export to HTML.
    The problem I am ecperienced just started in the last few days, sometime after 3/18/2011. I think this issue is different from similar problems reported in January, which seemed to impact all text animations.
    The problem is that text animations on slide 1 work OK in slide preview mode, but do not display at all in project preview mode or when published.
    Text animations work on all other slides. If I put a .blank slide in the project, so the failing slide 1 becomes slide 2, then the text animation plays OK, but I do not like such a workaround.
    In deliverables generated on 3/18, the text animations work on slide 1. If I regerate the same projects, the slide 1 animations no longer work.
    Has something been changed with Captivate 5 or Flash that is causing this problem? Any suggestions?

    I don't think you are missing anything. I am using the "Light_PAssage" animantion, but switching to the one you used has no impact.
    For me, if there is a text animation on slide one, it will play in File->Preview->Play Slide. It will not play in FIle->Preview->Project, From this slide, or Next 5 slides.
    The issue occurs in all my Captivate 5 projects, including projects that previously generated properly working outputs as recently as 2/23/2011.
    Is it possible it's related to Flash player? I am using Adobe Flash Player 10 ActiveX 10.2.152.26.
    I will send an example cptx to your email address. The example includes a blank slide one, and the text on slide 2 plays as expected in the previews and in the generated output. If I remove the blank slide 1, the text animation on the new slide 1 no longer plays.
    Thanks.

Maybe you are looking for