Audio only ... No Video

I have Flash Player 9,0,47,0
When I try to play the animated video on
http://www.winter2010.com/Default.htm
... Meet the Vancouver 2010 Mascots!
I get audio only, no video. What is blocking the video???
When I first installed Flash Player 9 to view this animation
it work properly.
I am using IE7

Similar Messages

My Elements 8 tutorials have audio only, no video. Any suggestions? Thanks

My elements 8 tutorials have audio only, no video. Any suggestions? Thanks.

Which Tutorials you are talking about?
- Elements Inspiration Browser?
- Adobe.com Tutorials?
- Or something else?
+ http://bit.ly/plFUdD

In Premiere Pro CS5.5 AVI file imports audio only - no video.

I've got a file (one of 3) I've been given to create a smaller file (320x480) from.
The file is an avi file and plays (video and audio) just fine in the native Windows media player. (I'm on Windows 7 Ultimate 64-bit) There are no issues of memory or HDisc space.
Video:
The file is 2:21:29 in length.
720x480
Data rate 1489kbps
Total bitrate 1617kbps
29 frames/second
Audio:
Bit rate 128kbps
Channels 2 (stereo)
Audio sample rate 48 kHz
The file is about 1.6Gb
This is one of 3 I recieved. The other two were of comparable specs and similar length (not exactly but one was longer, the other shorter.)
The problem is that this particular file (the other two import perfectly), when imported, only comes in as an audio file. No video imports. The other files import as audio and video. No error message either.
I've imported all kinds of video files in the past with different frame sizes, rates, and aspect ratios, and codecs, yet I've never had one that only imports the audio without the video.
Suggestions?!

Post in the Premiere Pro forum. This forum is for suite specific issues only.
Bob

Video transfer to PC but got audio only, no video.????

hello,
I have a Curve, 8330. I took my first video, a one minute epic. It plays great on the BB. I was able to transfer it to my PC, but I only get audio, no video. I tried both an email transfer and a direct cable connect with ROXIO. It saved as a Quicktime file, but just won't play right. What am I doing wrong? I also tired opening it as a WMP player with the same results; audio but no video.
MDH

Let's be constructive:
BUT WHY doesn't it work? and how can we fix it/make it work?
my cheap 'non apple' video cable works fine initially, then a message pops up about it not being an 'offcial' cable or some such, then asks if I want to enable airplane mode (both with or without it already disabled), and disables video out completely. Contrary to the many others that have overpaid for your proprietary cables; I'm NEVER EVER EVER EVER going to pay you for your atrociously overpriced cables, because you're action of 'disabling' 3rd party cables is monopolistic in any sense, destroys any hope competition in this area, hinders innovation by third party peripheral developers, and is downright unamerican imho because it does so. You've gone to far this time apple! I've come to the conclusion, you obviously don't care about functionality, as your hardware is almost always overpriced, proprietary, good looking junk, and you keep shaking my pockets for more money with your overpriced accessories and constant barrage of itunes streamery.
Anyway, how can I use my device to do video out on this officially licensed apple dock I have? It doesn't seem to work; and I paid a lot of money for it. If there isn't a solution; maybe you should give out refunds for all the devices that now don't work? Thanks

Quicktime X Exporting Audio only - No Video

Hello,
Any MOV file I brought into Quicktime X I used to able to export to 720p, 1080p or 420p to
a nicely encoded, universal H.264 Quicktime file.
Now, when I try and export, it makes a small audio file and no video. The codec I'm encoding from is 'Animation'...should be easy..?
Any ideas?
thanks,
Dan

I'm having the same problem. Exporting as a 720 or a 480 from a 1080 only makes audio files. It used to work great under Snow Leopard.
Even the Export for the Web/Broadband only ends up making audio-only .mov file
I rolled back to my old copy of QuickTime 7 pro and was able to export a 720 and a 480, though you have to wade through a lot more codec options...
K
x

Audio only, no video, when importing .avi - VP60

I'm trying to make a machinima (Sims 3) and am new to "serious" video editing and Premiere (I have done little projects on Windows Movie Maker and stuff like that before). I'm using the trial version of CS5.5.
My problem is that whenever I try to import .avi clips, they import as audio only and no video. The files open fine in Windows Media Player. The weird thing is that this has only started happening in the middle of my project, after I've already successfully imported and worked with several files recorded in the same way (and so I assume they were the same format).
After researching this issue as much as I've been able to, I downloaded the oft-recommended Gspot utility and took a look at some of the problem files. It says the codec is VP60, but that I already have it installed.
I haven't, to my knowledge, done any kind of converting or compressing of any of the videos before this happened. Another weird thing, though, is that files that imported correctly before are now only importing audio just like the newer ones.
I have tried converting these files to mp4's and other formats, which brings the video back into Premiere, but at a great loss of quality. I've also tried updating/reinstalling Quicktime and even a system restore, all without any luck.
Any help or ideas would be greatly appreciated, as I have a deadline FAST approaching!

This is a distribution format, not intended to be edited, because of the heavy compression. You have several options:
1. Try with consumer editor, like Magix, or WMM.
2. Convert to something editable and accept the quality loss.
3. Get the original, not compressed material from the copyright owner.

How do I capture audio only, no video?

I'm trying to capture an audio cassette, patched RCA/XLR to a Kona Card, to a G5 tower running FCP6. Since I want to capture audio only, I unchecked the video box in the clip settings tab of the LogCapture window. But when I capture now, I get a message saying "This operation could not be completed as there is no video".
How can I capture audio only? Can't turn off the video in Kona ctrl panel, must be in FCP.
Thanks in advance for the help.

Yes, as I mentioned, I did uncheck that video box, after which I got the message 'operation could not be completed as there is no video' (& capture failed). My capture setting is to Kona, but I've also tried Generic, but no luck.
This then led to my first crash course in SoundtrackPro, which is now recording the audio I needed. But I would love to figure out why FCP is not letting me capture audio w/o video, so any further suggestions are appreciated.

QT audio only / no video for divx 6.0

I bought a cool samsung camcorder - shot some video and imported to my new mac book pro 15" and I only get a blank white screen with audio. The video info says:
DivX 6.0, 720 x 480, Millions
DVI ADPCM, Stereo, 22.050 kHz
I have tried every player I can find and mplayer is the only one that plays it correctly. I have tried every codec I can find and nothing works.
All I want to do is be able to edit my video in imovie and i cant seem to get it in there. Please help!

I bought a cool samsung camcorder - shot some video and imported to my new mac book pro 15" and I only get a blank white screen with audio. The video info says:
DivX 6.0, 720 x 480, Millions
DVI ADPCM, Stereo, 22.050 kHz
I have tried every player I can find and mplayer is the only one that plays it correctly. I have tried every codec I can find and nothing works.
All I want to do is be able to edit my video in imovie and i cant seem to get it in there. Please help!

Audio Only, No Video on QT Pro 7 w MPEG-2 Component.

Hello,
I am having a problem which is described by many others. I have several videos (from my digital TV tuner card) which are MPEG2 video encoded with MPEG1 audio encoding. I've got QT Pro (7.1.5) as well as the MPEG2 playback component. However, when I open MPEG-2 muxed files all I get is audio and a white screen. The files play back perfectly in Windows Media Player.
I'm also curious if this is a install issue with the MPEG2 playback component? When I downloaded the MPEG2 component install file form Apple store and then ran it, the installation screen said "For Quicktime 6". How do I know if the component has been successfully installed?
And I have also tried opening them in Stream Clip but have the same audio-only problem. I've also tried viewing the files in QT's safe mode.
Any help would me much appreciated.

As you have discovered, QT does not support the export of sound from muxed mpeg files. Fortunately, this freeware will export to several formats. It also allows you to do some editing of mpegs without re-encoding if that is desired: Mpeg StreamClip

Video cable for the Iphone 3G - audio only, no video output to TV

I have been reading that with the iphone 3G you HAVE to buy apples video cables in order to play back video on your TV, is this true?
I just got a cable for christmas and it isn't officially licensed by apple and the video does not output to the TV, only the audio. I hope this isn't the case, but maybe it is true??
If my cable isn't working because of some need (forced on us by apple) to only use "apple" cables I will never purchase videos from itunes. It seems rather trivial to have to buy proprietary cables for more $$ in order to buy videos from itunes doesn't it??
In other words... Give us more money so you can keep buying things from us.
Sorry, I am a bit frustrated.
Message was edited by: zstevek
Message was edited by: zstevek
Message was edited by: zstevek

Let's be constructive:
BUT WHY doesn't it work? and how can we fix it/make it work?
my cheap 'non apple' video cable works fine initially, then a message pops up about it not being an 'offcial' cable or some such, then asks if I want to enable airplane mode (both with or without it already disabled), and disables video out completely. Contrary to the many others that have overpaid for your proprietary cables; I'm NEVER EVER EVER EVER going to pay you for your atrociously overpriced cables, because you're action of 'disabling' 3rd party cables is monopolistic in any sense, destroys any hope competition in this area, hinders innovation by third party peripheral developers, and is downright unamerican imho because it does so. You've gone to far this time apple! I've come to the conclusion, you obviously don't care about functionality, as your hardware is almost always overpriced, proprietary, good looking junk, and you keep shaking my pockets for more money with your overpriced accessories and constant barrage of itunes streamery.
Anyway, how can I use my device to do video out on this officially licensed apple dock I have? It doesn't seem to work; and I paid a lot of money for it. If there isn't a solution; maybe you should give out refunds for all the devices that now don't work? Thanks

Bought TV and Movie and have audio only NO VIDEO!!!

Why don't I have video? I have plenty of space. Just bought the new IPod 30GB for my niece for Christmas, and I wanted to put a few TV shows and a movie on it for her. I was able to download the TV shows and the movie, but got only audio. Don't know why I did not get video. PLEASE HELP!!!!
Thanks
Beth

I figured it out. I had the TV setting as "ON" when it should be "OFF" in order to see the video.

After Effects files are imported as audio only (no video)

Whenever I attempt to import an After Effects file into Premiere pro, it will show up in the Project window with an audio icon (but no sequence or video icon) it won't allow me to Put the sequence into my composition. The AE file has no audio on it, and is only a sequence.
I've tried using standard import as well as Adobe Dynamic Link.
This is on a mac on Premiere Pro CC 8.1

This is a distribution format, not intended to be edited, because of the heavy compression. You have several options:
1. Try with consumer editor, like Magix, or WMM.
2. Convert to something editable and accept the quality loss.
3. Get the original, not compressed material from the copyright owner.

Burning audio only from video files

Hi,
I'm trying to burn podcasts of one of my classes onto CDs (iPod is out of service, final is coming up, want to listen to them while driving), but they're video files. Is there a way within iTunes to extract the audio and burn only that? Should I use an outside program?
Thanks!

Nevermind, I just used garageband.

Audio only (no video) using MPEG-4

I uploaded video footage in the 'organizer' section, but when I drag it to the timeline, I only get the audio. The screen is red. I am using a Sony T900 which seems to give me MPEG-4 formatted videos.
Strange enough, in the 'organizer' section, I can see the video fine, but it's when I drag it to the timeline where the video disappears. Any ideas what's happening?

Video from still cameras nearly always must be converted before you can use it in Premiere Elements. Although Premiere Elements can work with AVCHD footage, it can't handle all MP4s with equal ease.
There are recommendations for converting this video into DV-AVIs in the FAQs to the right of the forum.
http://forums.adobe.com/thread/415317?tstart=0

Quicktime .MOV file plays audio only - no video

Okay, here goes...
I created a .MOV file from Avid via the H.264 codec. This file contains video and audio and was made on a Mac using Leopard. I played it back successfully on that machine.
I then copied it to a data DVD and put it on my XP PC with all OS software up to date. I have a freshly updated QT 7.6 install. The files will only play back audio on my PC - video appears black (if preferences are set to Direct X) or white (if preferences are set to safe mode). Video card is an NVIDIA GeForce 7900 GT/GTO; driver is up to date.
Anybody have any insight into what I need to do to my PC to get this video to play?

Thanks for the link. Unfortunately, it doesn't directly address the issue I am having (though it does show me the world of hurt out there when FCP and Avid bump up against each other in the same post process).
And the third-party page doesn't have any codecs for Avid.
Again, I am at a loss. I created the QT files from my Avid project on a Mac. The files played back properly on that Mac. They won't play back on my Windows machine, so I can only assume that there's something missing or different between the QT versions for Mac and Windows.
Since I can't figure out how to get these files to play properly on a PC and since my home machine is a PC, I guess I will not output footage from Avid to a .MOV file in the future. I will try to find a format that Windows Media Player likes, I guess.
Thanks for the help.

Quick Time 10 or 7: Audio only, no video???

Some video tutorial content I have opens up to a black screen in QT. The audio plays fine but there is no video. No video in iTunes either. Final Cut Express will play the video.
Any suggestions on what I can do to solve this dilemma?
Thanks.

"Some video tutorial content" is a pretty vague description. There must be hundreds of proprietary video codecs used in the Windoze world. Have you installed any of the 3rd Party Codecs that will allow many types of video to play in a Quicktime Window?
Perian is the best set of codecs I know of for the Mac:
http://www.perian.org/
Flip4Mac
From Microsoft for Windows Media files on a Mac:
http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx
Still won't play? VLC is able to play many files that Quicktime can't handle:
http://www.videolan.org/vlc/download-macosx.html

Audio only ... No Video

Similar Messages

Maybe you are looking for