Audio Only Plays for 10 Secs in Q.T Pro

I am running Quick Time Pro 7.01 and the audio is only playing for about 10 seconds. I havn't tried all audio file types but am having problems with 24 bit, 44.1kHz AIF and WAVs. I have had NO problems from using Version 6, so obviously is a problem with Version 7.
Any help greatly appreciated!

change the sync property (in the properties panel after clicking the keyframe where your sound starts) from event to stream.  retest.

Similar Messages

  • Captivate 4 Movies in PDF only plays for 5 sec on Macs

    I created a PDF document that has 3 Captivate 4 movies embedded.  The movies play just fine on Windows but only play for 5 seconds on macs.  Has anyone else experienced this problem? If so, please let me know what the solution is.  I have searched on the Community Help and can't find anything related to this problem.  Thanks.

    Someone answered my question on the Acrobat forum.  I needed to upgrade to 9 and use the Flash Tool which solved the problem.

  • Itunes purchases only play for 30 secs

    I have purchased songs.  When I go to play them they only play for 30 seconds. I went to 'Store' to download them but they downloaded the 30 seconds. I purchased the song again and it still gave me on 30 seconds of the song. Please help!

    In windows goto control panel>add and remove and uninstall BOTH iTUnes and quicktime. THen go here and roll down to "Clean up iTunes installer files on the computer" http://docs.info.apple.com/article.html?artnum=93976
    There are some adware programs that interfere with iTUnes, especailly the Qoologic adware that seems so ramped on the net. Scan the system with your adware/spyware program or Ewido (Its good at catching qoologic) http://www.ewido.com
    IF you have restored the PC, you need to goto the PC makers site and see if they have any patches/updates for issues with itunes. Some PCs, especailly HP and Dell PCs have issues with itunes after a restore is done. While there its best to just install all updates they offer that apply for your model.
    Now disable any Antivirus/security programs and goto apple.com download AND SAVE itunes to the PC. Once done goto the location you saved it and double click it to install.
    If after this, itunes still will not open, disable your antivirus again and go here to download and install "Quicktime WITHOUT iTUnes". This is the stand alone version of quicktime and usually fixes an itunes not opening.
    http://www.apple.com/quicktime/download/win.html

  • I had to reload all my programs after a  hard drive problem. Now certain songs are skipped over or only play for a sec or 2 then it jumps to next song. all songs played before. Some are Itune bought and some are my old music.

    I had to wipe my hard drive clean and reload all my programs. After reloading Itunes, I noticed that some songs will not play, they are skipped over, or the songs plays for 1-2 secs then it skips on to next song. Any ideas what I did wrong? All songs played before and some of affected songs are bought, some are my old library I copied off of CDs

    TimT wrote:
    I had been thinking that the hard dri've is starting to fail on me but then I thought about the fact that, If I play an MP3 and the player freezes up or starts jumping through the mp3 file, Then I restart the player and start the same MP3 agian and this time it plays normally, Is it really a hard dri've problem?
    Could be a lot of things unfortunately, from corrupt firmware, corrupt format on the disk, a problem with the mainboard, or a problem with the hard disk.
    I figure that if the hard dri've was damaged it would always freeze up on the same file at the exact same point in the music wouldn't it's
    Not necessarily. It could be just an intermittent fault.
    I want to Format my Zen Touch and reload the Firmware to start from scratch, but I first want to backup my 28 GBs of MP3 and WMA files. However I noticed that when I transfer the files to my hard dri've, all the ID3 Information is gone. Now adding ID3 info to 28GB of files will take days!
    Strange. Did you edit the tag data on the player? If so what happens is the tag data changes are made in the Music Library but not in the files themselves. There's only one way to write the changes back and this involves getting a copy of MediaSource 3. You then transfer the files back to the PC Music Library, and use an update function to update the files (the PC Music Library will have the same tag data as the Music Library on the player). One problem is that MediaSource 3 is very large, and not available from Creative as a download. I can try and get a copy to you if you can't find it elsewhere.

  • Songs only play for 10 secs

    IPod shuffle 4th
    All songs play for 10 secs

    Hey rjfdlf,
    That definitely sounds frustrating. If the songs are not playing fully, they may need to be redownloaded. To redownload them, you'll want to delete them from your library. See the following article:
    Songs in iTunes may not play back completely
    http://support.apple.com/kb/TS4357
    Symptoms
    Occasionally, if a song purchased from the iTunes Store on a Mac or PC was not downloaded completely, the song may not play back fully. The song may abruptly stop during playback, and iTunes may start playing the next song in your library or playlist.
    Resolution
    If iTunes in the Cloud is available in your country, try the following steps to resolve the issue:
    1. Delete the purchased song that is exhibiting the problem from your iTunes library.
    2. Click on the Purchased link in the iTunes Store to view your previously purchased music.
    3. Download your previously purchased song from this list.
    Note: iTunes in the Cloud, which allows you to download previously purchased songs from the iTunes Store, is not available in every country. Learn if iTunes in the Cloud is offered in your country
    Thanks,
    Matt M.

  • TS1362 I bought a CD and 1 of the tracks only plays for about 5 secs of its 3.22 total? HELP

    I bought Halestorms CD - A stange case of...., the 2nd track Mz Hyde only plays for a few seconds, i have tried looking on the iTunes site to see what to do but no luck, can anyone help me please?

    Delete and redownload:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • My music only plays for 5 seconds since update???

    Help! Since I updated, my music only plays for about 5 seconds, then randomly stops! I have to go hit play again..which it stops again 5 seconds later. I have NO idea what is happening? Please help?

    Sure your gone for the day, but no luck. Still get 15 sec and then on to the next song.

  • Music only plays for 15 seconds and then goes to another song

    I upgraded to ios 6. Since then, my old songs only play for 15 seconds. Anything purchased after the upgrade, plays the whole song.  Anyone ????

    Sure your gone for the day, but no luck. Still get 15 sec and then on to the next song.

  • My songs only play for 6 seconds

    My imported music is only playing for six seconds then going to the next track. All of my purchased music works fine though.  The imported files also play in their entirety on Windows Media Player so I know it's not the files' fault. Any suggestions?

    Sure your gone for the day, but no luck. Still get 15 sec and then on to the next song.

  • Videos only play for a few seconds or buffer very slowly since 11.9.900.170 update

    I updated my flash player this morning to 11.9.900.170.
    SInce i have updated my videos either only play for about 25 sec then stop. These are like 5 minute videos. It seems like they just stop buffering.
    On youtube the videos that used to buffer very quickly a few days ago on the highest quality can now barely play on low settings.
    I have tried to watch on mozilla and chrome. (both current versions)
    I have tried:
    - uninstalling and doing a clean install
    -installing Flash Player 11.7.700.257, 11.9.900.152, and 11.7.700.252 (currently have 11.9.900.170 installed, issue occured under each version)
    -the memory storage is set to 10mb
    -uninstalled and reinstalled mozilla firefox
    I have windows 7 64-bit
    thanks ahead of time.

    I updated my flash player this morning to 11.9.900.170.
    SInce i have updated my videos either only play for about 25 sec then stop. These are like 5 minute videos. It seems like they just stop buffering.
    On youtube the videos that used to buffer very quickly a few days ago on the highest quality can now barely play on low settings.
    I have tried to watch on mozilla and chrome. (both current versions)
    I have tried:
    - uninstalling and doing a clean install
    -installing Flash Player 11.7.700.257, 11.9.900.152, and 11.7.700.252 (currently have 11.9.900.170 installed, issue occured under each version)
    -the memory storage is set to 10mb
    -uninstalled and reinstalled mozilla firefox
    I have windows 7 64-bit
    thanks ahead of time.

  • Audio only plays when started from the beginning?

         Hi! I'm fairly new to flash, i'd consider myself a beginner, but recently i've been tasked with making an animation for someone! There is a song playing in the animation, it's a wav and it's on its own layer. There are also drawings i imported in too.
         My problem is, i want to be able to sync up the little drawings to the words of the song, but the audio only plays when i start at 0 on the timeline. If i were to start at let's say frame 24, it won't play. Does anyone know how to fix this? This commission needs to be finished by Wednesday and it's a S L O W process, having to start it over only to hear like one or two words later on

    change the sync property (in the properties panel after clicking the keyframe where your sound starts) from event to stream.  retest.

  • Can't import songs and ones in library only play for 45 seconds

    I'm in the process of moving my music collection to a new computer with a bigger hard drive. I installed the latest version of iTunes on the new computer, copied all the folders and contents of the itunes folder to the new computer in the same location.
    I bought a couple new songs successfully but now I can't add any of the files from my previous computer to the new library. I was able to import a few songs that iI purchased when on my original machine but now they only play for 45 seconds and jump to the next song in the playlist (if check) And now when I drag and drop songs on the Library to import them absolutely nothing happens.
    And yes, the new computer is authorized and the permissions on the folders are read / write.
    Any one have an idea of how to fix this? If not, I just going to burn all my songs to CD and import them that way and say so long to iTunes... just too much BS to just move a music library!

    Sounds like the PC's authroization file is messed up, or else the iTUnes preferences files.
    Follow the directions in this article, the SC Info file holds the PC authroization for iTMS songs.
    iTunes Does Not Open After Upgrading
    And also deleted these 2 preferecnes files:
    C:\Documents and Settings\username\Application Data\Apple Computer\iTunes\iTunes.pref
    C:\Documents and Settings\username\Local Settings\Application Data\Apple Computer\iTunes\iTunes.pref
    They will all get rebuilt when you open iTunes the next time. It should ask for authorization one last time, is all.
    Message was edited by: Katrina S.

  • Why do my audiobooks only play for a few seconds

    I had to reset my computer to factory setting recently, but when I reloaded my audiobooks they only play for a few seconds then  just stop. Anyone know what's going on?

    Possible content issue. You can contact support and ask for a replacement.
    http://www.apple.com/support/itunes/contact/

  • Videos only play for 5 seconds

    I'm having problems adding some videos to play on the iPhone. I've converted the videos to Quicktime, and got them to load on iTunes. They play perfectly there. I synch them to the iPhone, and they appear on the phone, but when they play on the iPhone, they only play for about 5 seconds.
    I've previously added a video that works fine... I don't see what I'm doing differently with the new set of videos.
    Ideas?

    No.  The videos will play for their entire length.  Try trimming the video in iPhoto by playing it and use the gear icon to bring up the Trip feature:
    You'll get this window where you can select the portion of the video to use:
    When you're done you can "revert to original" like this:
    That may give you what you need for the slideshow.
    OT

  • HT1567 trying to preview song but only plays for 5 seconds

    When i preview a song it will only play for 5 seconds instead of the 1min/half it allows. I 've never had this problem before. I update the software, but it still will not allow me to listen to the song no more tham 5 seconds

    I have had this problem for quite awhile.  Sometimes the preview plays all the way through, or not.  I had it in the previous version and now the new version.  There is no help from Apple/iTunes.  It seems odd that WE must continue to try and find the solution to THEIR errors without any comments or help from Apple. 

Maybe you are looking for

  • Not able to resize and make a partition of my startup disk

    Hi, I'm running Lion on a late - 2010 15 inch MBP and I already have a Boot Camp partition of Windows 7. I wanted to partition my hard drive again to install Ubuntu (which should be relatively painless). I tried out the live CD to get a taste of what

  • Satellite M70-131: Is a PA3396E-1ACA AC-adapter compatible

    Hi! My brand new M70-131 , model PSM70E-01500QG3 came with AC Adapter with Part Number : PA3396E-1ACA. I read on the support site, the AC Adapter should be: PA3468E-1AC3 This AC Adapter works fine and the battery gets charged ok. I just want to ask i

  • HT1349 Serial number is not valid?

    I cant get any online help as it says that my serial number is not valid for my ipod. I have checked the ipod cover and within the settings and both match but doesnt seem to work on the website?

  • How to tag media with keywords in Premiere CS5.5?

    Hi, I'm searching for a way to tag media (movie clips, subclips, sequences..) with multiple keyword tags. It seems that Bridge uses tags, but this functionality is only for real files. I'm using many subclips that I need to keyword tag within Premier

  • Convenient script to remove missing assemblies/missing webparts and missing set up files

    Hi All,   When try to run config wizard after any patch installation it fails to succeed beacuse of either missing assemblies or features or webparts or setup files. For features, I am using FeatureAdmin tool but for others, does anyone have any work