Audio only works when Inter WinDVD creator 2 is running

I have a Satellite A105-S1014. My sound worked perfecty fine until the other day I messed around with some .avi files on winDVD creator 2. My computer would run ffdshow whenever I opened a file. I think this has something to do with my problem. After exiting the program that day, I have no sound unless I reopen Inter Windvd creator 2 and open a file. Not just music but system sounds and everything. I'm guessing it has something to do with the ffdshow but not sure where I should go from here.

Haha! My laptop was sitting on a table and plugged into a stereo to play music (with Inter WinDvd creator 2 running of course) when my brother tripped on the cord and knocked it to the floor. The screen was freaking out but wasn't cracked so I shut it down and restarted. Sound fixed!!

Similar Messages

Why does my audio only work when i put water on the audio plug?

whenever i want to listen to music, i have to put water, or some liquid on the TRS (audio plug for earphones) for it to work. It will not detect an earphone without water. There is NOTHING wrong with my earphones, they work in other things without water. They are iFrogz. I need help really bad because i dont want to carry a water bottle on the bus and dip my cord in it JUST to listen to music. It is really annoying
Ipod Nano 7g Blue

It sounds like a hardware problem, so it's probably not something that can be solved without repair (or replacement). There may be a fault in the headphones jack that affects contact with headphones plug. Water is an electrical conductor, so it improves the connection enough so it works temporarily. That's my theory... But because water is an electrical conductor, it can cause a short circuit that may damage the iPod. That's why the warranty is voided if you accidentally get your iPod wet.
You can check your current warrany coverage with the iPod's serial number, here
https://selfsolve.apple.com/agreementWarrantyDynamic.do
I believe Apple uses the serial number most of the time, to verify coverage. If you have an Apple Store nearby, there are Apple tech support staff at the store's Genius Bar. You can make a reservation (to avoid a wait) using the store's web page.
http://www.apple.com/retail/
Otherwise, you can contact Apple tech support through the "Contact Us" web page
http://www.apple.com/contact/

HT4623 The audio only works sometimes on videos on YouTube,Facebook,vine...etc. Please tell me how to fix it!!!

Audio only works sometimes on videos and the volume buttons on the side only work sometimes,very aggrivating, please help!!

Hello Tetnus,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
Best of luck,
Mario

MBPro 17 Intel Core 2 Duo Audio only works with the headphones?

MBPro 17 Intel Core 2 Duo Audio only works with the headphones?
There is a red light constantly emitting from the headphone socket?
I can not listen to sound unless headphones are plugged in - when taken out I get a red light and the volume controls kets seem locked?
Please help!
Julian

Hi Kitty.
Seems to be quite a popular problem. In another post, I posted the following.
"The red light is the data signal that is transmitted if you plug in an Optical Audio device such as surround sound speakers. I had the same problem for a short while with my 17' MBP. Sound was working fine from my built in speakers but I plugged in some earphones to listen to something that I did not want the rest of the office to hear and after pulling the hearphones out, the optical signal (red light) was being transmitted. The switch Cessna is referring to is the switch that is triggered inside the port that tells OSX that earphones/optical audio device is plugged in and to shut down power to the built in speakers. When the device is un-plugged from that port, the switch should get triggered again and power up the built in speakers and disable the optical light signal. Perhaps there is the slightest defect on the earphones you are plugging in that are preventing it from triggering the switch when the earphones are un-plugged.
Try a different sent of earphones to maybe trigger the switch if you are uncomfortable with the paper clip solution."
That seemed to solve the problem for that user.
The link to the post is http://discussions.apple.com/thread.jspa?threadID=895286&tstart=30
Good luck

Iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

iphone 4: Home Button Not Working. The home button only works when it is connected to iTunes, once i disconnet it does not work, i have tried a restore to factory settings but it still is not working. Any suggestions?

Apple, as I said, does not repair your iPhone. All hardware service issues are handled by replacing the unit. So they can't handle the home-button issue without also addressing the issue of the cracked screen, for which they'll almost certainly charge you. But you can make an appointment at an Apple Store or call Apple tech support and plead your case.
Regards.

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

My macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help.

my macbook wont start the screen turn blue and stay like that for hrs. It only work when i use safe mode, i try to use disk utilities to fix it but the disk utilities keep saying error and a bunch of other stuff. I dont the cds the comp came with, help. i've tried the command s command p command v but nothing i've tried to the safe mode then a quick restart but nothing
disk utility give me this:
Process:         Disk Utility [371]
Path:            /Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier:      com.apple.DiskUtility
Version:         11.5.2 (298.4)
Build Info:      DiskUtility-2980400~60
Code Type:       X86-64 (Native)
Parent Process: launchd [86]
Date/Time:       2013-11-05 03:29:41.247 -0500
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          9522 sec
Crashes Since Last Report:           29
Per-App Interval Since Last Report: 981 sec
Per-App Crashes Since Last Report:   25
Anonymous UUID:                      F6B8E263-76C8-4C7D-AA58-48134BF4BA78
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000020
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   libobjc.A.dylib                         0x0000000100c62fbc _read_images + 312
1   libobjc.A.dylib                         0x0000000100c79721 map_images_nolock + 1266
2   libobjc.A.dylib                         0x0000000100c62761 map_images + 115
3   dyld                                    0x00007fff5fc039c5 dyld::notifyBatchPartial(dyld_image_states, bool, char const* (*)(dyld_image_states, unsigned int, dyld_image_info const*)) + 853
4   dyld                                    0x00007fff5fc0c849 ImageLoader::link(ImageLoader::LinkContext const&, bool, bool, ImageLoader::RPathChain const&) + 201
5   dyld                                    0x00007fff5fc04d54 dyld::link(ImageLoader*, bool, ImageLoader::RPathChain const&) + 118
6   dyld                                    0x00007fff5fc08f7c dlopen + 490
7   libSystem.B.dylib                       0x0000000100a14e40 dlopen + 61
8   com.apple.CoreFoundation                0x0000000100d78ef7 _CFBundleDlfcnLoadBundle + 231
9   com.apple.CoreFoundation                0x0000000100d77e97 _CFBundleLoadExecutableAndReturnError + 1191
10 com.apple.Foundation                    0x0000000101008355 _NSBundleLoadCode + 638
11 com.apple.Foundation                    0x0000000101007c78 -[NSBundle loadAndReturnError:] + 742
12 com.apple.Foundation                    0x000000010101960c -[NSBundle principalClass] + 38
13 com.apple.framework.DUSupport           0x0000000100082080 -[DUModuleManager(_private) findDUModules:] + 405
14 com.apple.framework.DUSupport           0x0000000100081ed9 -[DUModuleManager orderedModuleListOfModules] + 40
15 com.apple.DiskUtility                   0x0000000100006082 0x100000000 + 24706
16 com.apple.DiskUtility                   0x0000000100005f59 0x100000000 + 24409
17 com.apple.AppKit                        0x0000000101444625 -[NSWindowController _windowDidLoad] + 538
18 com.apple.AppKit                        0x00000001013e1f77 -[NSWindowController window] + 112
19 com.apple.AppKit                        0x00000001015f61d9 -[NSWindowController showWindow:] + 47
20 com.apple.AppKit                        0x00000001015c7c5c -[NSDocument showWindows] + 98
21 com.apple.AppKit                        0x00000001015c64bb -[NSDocumentController openUntitledDocumentAndDisplay:error:] + 340
22 com.apple.AppKit                        0x00000001014f7b44 -[NSDocumentController(NSInternal) _openUntitled] + 111
23 com.apple.AppKit                        0x00000001014f79ab -[NSApplication _doOpenUntitled] + 257
24 com.apple.AppKit                        0x00000001014f733b -[NSApplication(NSAppleEventHandling) _handleAEOpen:] + 185
25 com.apple.AppKit                        0x00000001014f6fd9 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 77
26 com.apple.Foundation                    0x0000000100ffd0d6 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 360
27 com.apple.Foundation                    0x0000000100ffcf06 _NSAppleEventManagerGenericHandler + 114
28 com.apple.AE                            0x0000000104d7332b aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned int, unsigned char*) + 162
29 com.apple.AE                            0x0000000104d73224 dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 32
30 com.apple.AE                            0x0000000104d7312b aeProcessAppleEvent + 210
31 com.apple.HIToolbox                     0x00000001028a0619 AEProcessAppleEvent + 48
32 com.apple.AppKit                        0x00000001013fc095 _DPSNextEvent + 1191
33 com.apple.AppKit                        0x00000001013fb801 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
34 com.apple.AppKit                        0x00000001013c168f -[NSApplication run] + 395
35 com.apple.AppKit                        0x00000001013ba3b0 NSApplicationMain + 364
36 com.apple.DiskUtility                   0x0000000100002009 0x100000000 + 8201
37 com.apple.DiskUtility                   0x0000000100001db8 0x100000000 + 7608
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0   libSystem.B.dylib                       0x0000000100a27c0a kevent + 10
1   libSystem.B.dylib                       0x0000000100a29add _dispatch_mgr_invoke + 154
2   libSystem.B.dylib                       0x0000000100a297b4 _dispatch_queue_invoke + 185
3   libSystem.B.dylib                       0x0000000100a292de _dispatch_worker_thread2 + 252
4   libSystem.B.dylib                       0x0000000100a28c08 _pthread_wqthread + 353
5   libSystem.B.dylib                       0x0000000100a28aa5 start_wqthread + 13
AND MORE TOO MUCH TO COPY N PASTE HELP PLEASE!!!!!

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

My Ipod touch will only work when plugged into a itouch radio. When I take it out, it goes blank. Why can I do?

My Ipod touch will only work when plugged into an Itouch radio. When I take it out of the charger, it goes blank. The battery shows fully charged. It appears that the battery is no longer charging. What should I do?

Try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. If that fails, the battery may have gone kaput.

My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

My ipod nano 4th generation only works when it is plugged into the computer; otherwise, the screen turns black and it is completely unresponsive to any efforts such as pushing buttons, reseting, etc. What should I do?

Sounds like the battery is shot and in need of a replacement. You can have Apple replace the battery for a flat fee or you can send it into a third party repair center for a bit less.
Not much else you can do for troubleshooting this one.
B-rock

I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in.

I recently repaired disk permissions on my mac HD and now my on-board speakers wont work, the icon is greyed out and only works when my headphones are plugged in

Try to put your headphones several times in and out from your connection, might be the switch is stuck. Normally it should work again while trying to plug the headphones in and out!

My CD/DVD Drive Only Works When I Jam the CD/DVD in hard..?

My CD/DVD drive only works when I stuff the CD/DVD in the drive EXTRA hard. If I just try to put in with normal force (that at one time worked) it spins the disc around, makes a spinning noise, and then ejects it. I'm taking it to the Apple Store soon. What should I expect to be wrong and is it fixable? Please share details. Thanks in advance.

Welcome to Apple Discussions!
It sounds like the spring that loads the drive has gotten jammed by something. This can often happen if you use CDs with sticky labels, or do anything to label the discs directly. As a result of issues like these, I've not labeled any discs directly, and instead store the in jewelcases, and purchase them prepackaged in jewelcases to avoid such issues.

Upgrading to Mavericks wrecked my MacBook Pro & now it only works when external hard drive is plugged in

So I tried to upgrade to Mavericks today and it failed (same error as in this post which seemed to be a common problem). It wouldn't let me repair the disk, and after trying all sorts I rebooted my computer in recovery mode - it wouldn't let me reinstall Lion because the hard drive was apparently locked and I could see no way around this. So I decided to restore from a Time Machine backup on an external hard drive and that worked okay, except my MacBook now only works when the external hard drive is connected. If I remove the external hard drive, I'm back to square one as it still won't let me reinstall Lion as the HD is locked!
I have no idea what's going on. HELP!

The startup drive is failing, or there is some other internal hardware fault.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

What's wrong with my MacBook, it only works when its plugged in to the wall charger

my MacBook only works when its plugged in with the wall charger. What's wrong with it? it the problem fixable ?

Marina -
What Kappy said, or maybe your Battery charging cable is faulty, or something's happened to the input slot.
I'd take it to Apple and have them troubleshoot it for you.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

Is there anyway to have an 11 inch mac air connected to an external monitor with lid closed and still be able to see content. I have a wireless ketboard and mouse and have tried everything. Only works when plugged in.

You are referring to a feature called Clamshell Mode, please read Clamshell Mode setup for instructions.
BTW when posting when you use generalities such as "have tried everything" this tells us nothing. When posting please be specific and try to paint a complete picture. It just makes things easier for those trying to help you.

My MacBook Pro wi fi is not working, it only work when I restart or switch off my computer. Now I M

My MacBook Pro wi fi not responding. It only work when I switch on or restart my computer for an hour then goes off again . However because I have switched on and off to often I am having problems turning on my laptop

Try this. In System Preferences / Network, create a new location and follow directions to configure it. That sometimes helps.

Audio only works when Inter WinDVD creator 2 is running

Similar Messages

Maybe you are looking for