Audio Out doesn't work for some devices under 9600m GT; works under 9400m

Hello. I've recently noticed that when I plug my MBP into my TV to use as a monitor and for speakers, I can't use the TV's audio when I'm using the 9600m GT for graphics, but, mysteriously, it works just fine when I'm on the 9400m. This is a major problem for when I want to play games.
For some odd reason, though, plugging in headphones works perfectly under both configurations. I connect the audio to the TV using a standard audio cable that splits into the red and white plugs. Any idea how I can get audio up and running under the 9600m GT?
Message was edited by: Pickleman

Thanks for the confirmation.
I think my issue could be the same, as i'm also trying to send audio to the tv via the headphone port. Just saying again to explain better:
- Tv's have analog audio input for hdmi, but at least for mine, it only uses these inputs if it does (or doesn't) get a certain signal for audio over the hdmi connection.
- Whatever the 9400 is doing, its convincing the tv to use the analog inputs, all is well.
- Whatever the 9600 is doing, its convincing the tv -not- to use the analog inputs, thus no sound.
It was a bit fiddly, but i got it to a state where audio through the headphone port would work fine under the 9400, i would set graphics to high performance, log out, log back in again, and audio would not work. Undoing this (setting the graphics to better battery life and relogging in) would restore sound.
I'm thinking the root of the issue is that the tv gets detected as supporting audio, and something the 9600 is doing is fooling the tv to think it is receiving audio, though as you suggested it's not supported and nothing is going though.. which has the side effect of igoring the analog inputs we're sending though the headphone jack.
Some sort of fix to disable audio down the displayport would be great. PC nvidia drivers that i'm running on the same mac in boot camp have an explicit option to do this, so it shouldn't be too hard..
Or any other work around..
Thanks!!

Similar Messages

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on that wifi network

The wifi at my school isn't very good. And I can't send iMessages through it. It works for some apps like score center and my radar app, but doesn't work for other apps like clash of clans and iMessage. How can I get it to work on my school wifi. I have an iPhone 4S on AT&T and iOS 7.04

In a roaming network, your "main" router is the device that would require port mapping/forwarding to be configured in order to access the IP camera from the Internet. This router is also the one that would be provide the private IP address for the camera which you will want to be a static one.
So as you described your network, the IP cameras should be getting an IP address or you assigned it a static one and this is the address that you would enter in the Private IP address (or equivalent depending on the router used) field when setting up port mapping.
If you are not able to access this camera from the local network, then this should be troubleshot first.

HT201263 Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTune

Unable to update, restore or recover. Slider doesn't slide and number pad doesn't work for passcode. What next? Worked last night . Battery charged. When I push Home button I get my backgroung but can't slide slider. Device is recognized by iTunes.Help! Thank you.

Besweet, I'm having the very same problem with 60GB colour which was bought new and worked for 6 months before suddenly just not being recognised by PC. I hadn't changed anything at all.
I've followed all troubleshooting advice and reinstalled and updated iTunes and iPod updater software but all troubleshooting routes seem to hit the dead end of either the need to access the iPod via the PC (which isn't possible as it's not showing up at all) or the iPod in disc mode stuck at "ok to disconnect".
It's still under 1yr warranty so will have to take to a dealer.
I'm sorry that's not much help for you but at least you know it's not a unique problem.
PC Windows XP

ENET-232/4 doesn't seem to work for some instruments

I have an ENET-232/4 and it works for some analog-digital interfaces I'm using but doesn't work for other instruments. I tried using a Shimadzu LC2010 with it, it configured OK, but the instrument wouldn't start a run. I tried a Thermo TraceGC and it wouldn't even configure through it. But simple A/D interfaces (PE Nelson boxes, SS420X, etc.) are working fine.
Are there limitations on the type of instrument that can be run through a ENET-232/4?

Possibly - if the software is written with hard timings (like it writes a command, waits 10 ms for the reply, then writes a seconds command, etc.) then its going to run into problems communicating over a high latency communication link.
Sometimes these timings are adjustable - are there any options in the program for adjusting communication timeouts?

My iMessage doesn't work for some with iPhones

WWhy does iMessage not work for some thst have iPhone? For example day 1 text went as iMessage day 2 changed to sms

Hi,
1) That iPhone may not be registered with the iMessages Servers.
Several variants of that:-
2) the iPhone has lost power/is out of range and been "de-registered".
3) Twice my iPhone has become set to Not Receive on the iPhone Number - the User cannot change this - but it has happened. After a while if this is not spotted it loses the link with the Apple ID as well.
4) It is not entirely clear if you Block someone in iMessages whether the iPhone still gets SMS versions.
It appears you might have to block them for Phone (and therefore related services like SMS) as well as iMessages.
5) iMessages servers having a bad day.
9:39 pm Saturday; April 18, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

My FaceTime doesn't work for some reason, and i want to know why. ;\ It's iOS 6.1.6

My FaceTime doesn't work for some reason, and i want to know why. >;\ It's iOS 6.1.6

Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
http://www.apple.com/support/systemstatus/

Printing doesn't work for some docs (CUPS 1.4, Samsung ML-2010, Splix)

I installed my Samsung ML-2010R some days ago. CUPS version is 1.4.2-1. Splix is 2.0.0-1.
After blacklisting lpusb installation worked fine. Also printing a testpage worked. Printing works for some documents, but there are some which won't (all were pdfs, but I mainly tested .pdfs). The document is sent to the printer (or at least it looks so), but nothing happens (sometimes the printer makes a short noise). When I go to http://localhost:631/printers/ it says "Frei - "Processing page 11..."" (while "frei" being German for "free", don't know, perhaps the corresponding status in English is idle). The page number changes depending on the document (but it is always the same page if I try to print the same document more times).
In the log-files I don't find anything useful (at least for me). Here is what I get, if I try to print one of these documents:
In page_log:
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:24 +0100] 1 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:24 +0100] 2 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:25 +0100] 3 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:30 +0100] 4 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:31 +0100] 5 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:31 +0100] 6 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:32 +0100] 7 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:32 +0100] 8 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:33 +0100] 9 1 - localhost VO MMF.pdf A4 one-sided
Samsung_ML-2010 106 johann [12/Nov/2009:20:25:33 +0100] 10 1 - localhost VO MMF.pdf A4 one-sided
In access_log:
localhost - - [12/Nov/2009:20:25:23 +0100] "POST /printers/Samsung_ML-2010 HTTP/1.1" 200 441 Create-Job successful-ok
localhost - - [12/Nov/2009:20:25:23 +0100] "POST /printers/Samsung_ML-2010 HTTP/1.1" 200 17565828 Send-Document successful-ok
In error_log there is nothing.
Perhaps you could help me with further debugging. I'll try the proprietary Samsung driver in the meantime.

EDIT: This didn't actually seem to fix the problem. :'(
Good news! I think the outstanding developers of Debian have a patch for our bug.
It involves recompiling CUPS, which in Arch means making new packages for "cups" and "libcups". I used the package build information for CUPS from ABS and created a new PKGBUILD. Here it is for reference:
pkgbase="cups"
pkgname=('libcups' 'cups')
pkgver=1.4.2
pkgrel=1
arch=('i686' 'x86_64')
license=('GPL')
url="http://www.cups.org/"
makedepends=('libtiff>=3.9.1' 'libpng>=1.2.39' 'acl' 'openslp' 'pam' 'xdg-utils' 'heimdal>=1.2.1-5' 'gnutls>=2.8.3' 'poppler>=0.10.7-2'
'xinetd' 'gzip' 'autoconf' 'php' 'libusb' 'dbus-glib' 'avahi' 'hicolor-icon-theme' 'patch')
source=(ftp://ftp.easysw.com/pub/cups/${pkgver}/cups-${pkgver}-source.tar.bz2
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/confdirperms.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/default_log_settings.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/dnssd-avahi.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/do-not-broadcast-with-hostnames.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/dynamic-default-ripcache-size.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/log-debug-history-nearly-unlimited.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/logfiles_adm_readable.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/pidfile.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/poppler-based-pdftops-fixes.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/ppd-poll-with-client-conf.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/ppdc-dynamic-linking.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/printer-filtering.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/quiesce-bonjour-warning.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/reactivate_recommended_driver.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/read-embedded-options-from-incoming-postscript-and-add-to-ipp-attrs.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/removecvstag.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/rootbackends-worldreadable.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/select_use_after_free.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/show-compile-command-lines.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/ubuntu-default-error-policy-retry-job.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/ubuntu-disable-browsing.dpatch
http://patch-tracker.debian.org/patch/series/dl/cups/1.4.2-4/usb-backend-both-usblp-and-libusb.dpatch
cups
cups.logrotate
cups.pam)
options=('!emptydirs')
md5sums=('d95e2d588e3d36e563027a963b117b1b'
'3ec4a323bfb2fb1f2f4803acaaa9a99d'
'b139625dcc54058a8ce7311f80d14ed5'
'8fef21a4691de602d0ce3abe06c727e5'
'f3dc31da89a90c85462b501a1ef05484'
'3001462cb25772fd33cf437e501e52a6'
'6f83bf175fde6a11b26ff1e585383cc9'
'59666bc716e34b61614bbe0cee388c92'
'81d35f73f56c709baac655ad24f1e10e'
'531b865d9a6fb02b2ddb29432b7238a1'
'25fa0289a46e613ab9f66b0b768e6e6b'
'e15d8fa01e657c387fdc9745a8ca4a98'
'6167d4a574f243888a5fba8132c747c4'
'd9b197a942308c22b42d2113063ee0c1'
'd6a229f40ff14c88d07db58c036c9fcc'
'd617f77aa89572464b32575e2caa8773'
'0fe2d8fa6eceeb6e52bac74eaf631a5d'
'1824bee0db35a4edcf56af5c928d8a80'
'38db9c9b997d2a768d89d900d131af47'
'6a4e46310b0e84230184715804f0b8c3'
'ad8634485cab37fbd81f56ada7ba55f5'
'a4b34f2843641bfe0856037581a34dd0'
'7c5053b96481e14879d4f5ea2a0c660b'
'5c85b7d8d2ddd02c2c64955cebbf55ea'
'f861b18f4446c43918c8643dcbbd7f6d'
'96f82c38f3f540b53f3e5144900acf17')
build() {
cd ${srcdir}/${pkgbase}-${pkgver}
# Apply Debian patches
patch -p1 < ../confdirperms.dpatch
patch -p1 < ../default_log_settings.dpatch
patch -p1 < ../dnssd-avahi.dpatch
patch -p1 < ../do-not-broadcast-with-hostnames.dpatch
patch -p1 < ../dynamic-default-ripcache-size.dpatch
patch -p1 < ../log-debug-history-nearly-unlimited.dpatch
patch -p1 < ../logfiles_adm_readable.dpatch
patch -p1 < ../pidfile.dpatch
patch -p1 < ../poppler-based-pdftops-fixes.dpatch
patch -p1 < ../ppd-poll-with-client-conf.dpatch
patch -p1 < ../ppdc-dynamic-linking.dpatch
patch -p1 < ../printer-filtering.dpatch
patch -p1 < ../quiesce-bonjour-warning.dpatch
patch -p1 < ../reactivate_recommended_driver.dpatch
patch -p1 < ../read-embedded-options-from-incoming-postscript-and-add-to-ipp-attrs.dpatch
patch -p1 < ../removecvstag.dpatch
patch -p1 < ../rootbackends-worldreadable.dpatch
patch -p1 < ../select_use_after_free.dpatch
patch -p1 < ../show-compile-command-lines.dpatch
patch -p1 < ../ubuntu-default-error-policy-retry-job.dpatch
patch -p1 < ../ubuntu-disable-browsing.dpatch
patch -p1 < ../usb-backend-both-usblp-and-libusb.dpatch
# Rebuild configure script for --enable-avahi.
aclocal -I config-scripts
autoconf -I config-scripts
./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var \
--with-logdir=/var/log/cups -with-docdir=/usr/share/cups/doc \
--with-cups-user=daemon --with-cups-group=lp --enable-pam=yes \
--disable-ldap --libdir=/usr/lib --enable-raw-printing \
--enable-dbus --with-dbusdir=/etc/dbus-1 --enable-ssl=yes --enable-gnutls \
--with-php=/usr/bin/php-cgi --with-pdftops=pdftops --with-optim="$CFLAGS"
make || return 1
package_libcups() {
pkgdesc="The CUPS Printing System - client libraries and headers"
depends=('gnutls>=2.8.3' 'libtiff>=3.9.1' 'libpng>=1.2.39' 'heimdal>=1.2.1-5')
cd ${srcdir}/${pkgbase}-${pkgver}
make BUILDROOT=${pkgdir} install-headers install-libs || return 1
# put this into the libs pkg to make other software find the libs(no pkg-config file included)
mkdir -p ${pkgdir}/usr/bin
install -m755 ${srcdir}/${pkgbase}-${pkgver}/cups-config ${pkgdir}/usr/bin/cups-config
package_cups() {
pkgdesc="The CUPS Printing System - deamon package"
install=cups.install
backup=(etc/cups/cupsd.conf
etc/cups/mime.convs
etc/cups/mime.types
etc/cups/snmp.conf
etc/dbus-1/system.d/cups.conf
etc/logrotate.d/cups
etc/pam.d/cups
etc/xinetd.d/cups-lpd)
depends=('acl' 'openslp' 'pam' "libcups>=${pkgver}" 'xdg-utils' 'heimdal>=1.2.1-5' 'gnutls>=2.8.3' 'poppler>=0.10.7-2'
'libusb' 'dbus-glib' 'avahi' 'hicolor-icon-theme')
optdepends=('php: for included phpcups.so module')
cd ${srcdir}/${pkgbase}-${pkgver}
make BUILDROOT=${pkgdir} install-data install-exec || return 1
# this one we ship in the libcups pkg
rm -f ${pkgdir}/usr/bin/cups-config
# kill the sysv stuff
rm -rf ${pkgdir}/etc/rc*.d
rm -rf ${pkgdir}/etc/init.d
install -D -m755 ../cups ${pkgdir}/etc/rc.d/cups
install -D -m644 ../cups.logrotate ${pkgdir}/etc/logrotate.d/cups
install -D -m644 ../cups.pam ${pkgdir}/etc/pam.d/cups
# fix perms on /var/spool and /etc
chmod 755 ${pkgdir}/var/spool
chmod 755 ${pkgdir}/etc
# fix .desktop file
sed -i 's|^Exec=htmlview http://localhost:631/|Exec=xdg-open http://localhost:631/|g' ${pkgdir}/usr/share/applications/cups.desktop
# compress some driver files, adopted from Fedora
find ${pkgdir}/usr/share/cups/model -name "*.ppd" | xargs gzip -n9f
This makes new versions of the packages "cups" and "libcups". I installed them and my printer is behaving very well. The Debian/Ubuntu developers work miracles.
If you could try it, to see if it fixes your printer problems too, that would be great.
Here is where I got the patches from. http://patch-tracker.debian.org/package/cups/1.4.2-4 I applied almost all of them. I excluded the "drop unnecessary dependencies" patch because it brought compiler errors with the default Arch CUPS PKGBUILD, and also excluded the "man page" and "manual" patches. I think the only patch you and I actually need is the "usb-backend-both-usblp-and-libusb" patch, but I'm not really in the mood to try applying only that one, since it seems to be working fine now. I decided to ignore applying the Ubuntu CUPS patches, because they mostly seem to be simply patches to the way CUPS is installed. Anyway, I hope these patches are moved upstream soon!
If we have good results from this PKGBUILD, I think I will upload it to AUR. It will be my first AUR package.
Last edited by drcouzelis (2009-12-07 15:46:29)

Why does iMessage only work for some of my contacts?

Having problems with iMessage. It will work for some of my contacts but not others. And those people arre having the same problem, works with other people but not me.. Anyone dealt with this?

1. Both devices have to be running iOS 5.*
2. Internet latency can delay iMessage connection. If you enabled "Send as SMS", the phone will switch to SMS if iMessage doesn't connect quickly. If you disable Send as SMS, more of your messages will go through as iMessage.

HT2844 iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working...

Hello,
My iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working through that port. I tested the speaker system through my iPhone, and it works fine. I hooked it up to the Headphone out/Optical digital audio in port, and it works through that port also. I did a computer restart, I also checked all wiring and did a system repair on the computer. I also restarted the computer in mode where I could use the system utility, and the computer still did not correct the matter, and it reported everything as being "ok". I wented into "sound", through system preferences, and the computer does not recognize anything I plug into the Audio in/Optical digital audio out port. When I plug the speaker sysytem into the headphone out/optical digital audio out port, it does recognize the Bose speaker system as being "headphones".
Reading through a lot of forums, I hear everything from compatibility, to the port being stuck, and on and on. Since the port was working before, and just quit working one day, I wonder if there is a capacitor or fuse or some type of similar thing is blown, and causing the port to be unfunctionable. Maybe the port went bad, but before this time, I had never used it, and the computer does not move around, and I never plug in and pull wiring out unless needing to, and that being rare.
Here is a link to Costco, where I bought the system, and the exact system I have, if this is any help: http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku= A4092931&ST=pla&dgc=ST&cid=262075&lid=4742361&acd=1230980794501410
By the way, I am running OS X Mountain Lion (10.8.5). I upgraded to Mavericks about a month ago, and expeirienced a number of issues, and had to take my iMac into Apple. Talking with the tech, I decided to wait for a while more before I upgraded to Mavericks. I try and keep the computer maintained.
If any of you have any ideas regadrding wear and tear, and fix I can do, etc., besides having to take my computer into Apple? Thank you, and potentially all of you, for your time and effort in helping me with this issue. Thank you kindly.
davE

Okay, davE, first, you have posted in the "Mac Pro" forum (not Macbook Pro), so we can't be super helpful
but we help you. First, hold down the Option key while clicking on the speaker icon at the top of your screen. This should show you all the inputs and outputs you have. you could check in "About this Mac" then "More info" to see whatever's recognized. Then, maybe, fire up Audio MIDI. your speaker system should show up there. something might have gotten set incorrectly. You can test it there. I guess you are using the good ol' analog cable for connection, and it works on your iPhone, so the cable isn't bad. You could try this. it 's an adapter which might solve your problem
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
depending on which model of Bose speaker you have, you might try doing a product reset
turn off speakers...unplug power cord from outlet...wait 1 minute..plug cord into outlet..turn on speakers..
\\turning off automatic standby||
press and hold top of control pod for 6 seconds until you hear 2 tones that go from high to low
other than that ,I don't know
John B

Quicktime working for some but not for others

Hello all,
I'm developing this website and it displays videos in quicktime format, but it's just not working for some people... It just won't play for some reason I just don't know 'cause I couldn't make the error happen to me and got no good help from others...
This is what's happening: @ www.thebrooklynbrothers.com/ clicking on "work, work and more work", then clicking on MEDIA and then FILM, it should display the QT movie and the user could play it, but for some reason it just shows up the QT logo and nothing more, as some people are telling me... could somebody check this out to see if it happens to you as well and tell me what could be the problem or any other details of the error so I can figure out what it is?
if you want to check a sample URL it loads from there, check this one: http://www.thebrooklynbrothers.com/new/portfolio/contentloader.php?file=cnneraq.mov&filetype=2
Thanks you so much for your time! ANY help would be greatly appreciated! I'm desperate right now!

I'm having a similar problem with videos uploaded onto my website. It all plays fine through Firefox and Internet Explorer on my other PC, but on this one (Win XP), I just get a blank page after it's finished loading. No video box or error mesage. Just lots of white space. I've checked all my settings, and have QT as my default player, but still nothing. Have also downloaded the latest QT updates. Is there something I'm missing in Windows or Internet Explorer? I don't have any problems with it on my Mac.
Thanks,
Lucy

Outlook autodiscover is not working for some users in coexistence

Hi
We are doing exchnage 2013/2010 coexistence
Most everything is ok BUT outlook autodiscover is not working for some exchange 2010 users now that 2013 is in the front!!!. We end up creating the profiles manually. It has affected some but not all the users.
I followed the instructions here but it didn't help.
http://blogs.technet.com/b/tips_from_the_inside/archive/2012/01/11/autodiscover-fails-for-one-or-more-users.aspx
Using outlook 2010, 2013, patches, .... didn't make a difference
Would you please help?
Thank you

Hi
If it is affecting only few handful of users i could suspect a mailbox corruption and would recommend to move mailbox and see the results.
Also you can try below
You need to set the values MaxFieldLength, MaxRequestBytes & MaxTokenSize to below on Exchange 2010 CAS servers as well as Exchange 2013 CAS servers
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxFieldLength
Type: DWORD
Value: 65534
Path: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\HTTP\Parameters
Name: MaxRequestBytes
Type: DWORD
Value: 16777216
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\Kerberos\Parameters
Name: MaxTokenSize
Type: REG_DWORD
Value: 48000
Just reboot the servers once its done and you will be good to go.
References
https://social.technet.microsoft.com/Forums/en-US/cc2929ac-4d36-4e84-a567-ce9b3bec1398/http-400-bad-request-on-iis-8-exchange-2013-cu2-on-windows-server-2012-autodiscovery-is-not?forum=exchangesvrgeneral
http://blogs.technet.com/b/kristinw/archive/2013/03/28/recommended-changes-and-enhancements-to-support-exchange-in-an-enterprise-environment-whew.aspx
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP)

MAM application is not working for some users

Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.

Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times

Time Capsule only works for one device at a time, how to make it capable to be used for multiple devices at times.
Please help to set it up, thanks in advance

You need to give more info..
Firstly only works for what.. networking.. backup.. wireless. You need more nouns.. more adjectives... describe what you want and what fails.. then we can figure out why.
Most likely you have bridged it when it should be in router mode..
Most likely you are using Lion or ML which has the airport utility bridge the TC by default.
Change it to working as a router. That might help.
If you press reset button it will default back to router btw.
If you are on Lion.. use a real utility. http://support.apple.com/kb/DL1547

Outlook Anywhere not working for some users

Hi All,
I am having a strange issue today with a customer -
Outlook Anywhere has been enabled on their Exchange 2010 environment, but it doesn't work for some users.
Using the ExRCA I have been able to identify the following error on the users who are unable to connect:
"Testing the MAPI Mail Store endpoint on the Exchange server."
"Attempting to log on to the mailbox"
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.
On users that are able to connect it goes through the ExRCA without any issues.
Any help would be much appreciated.
Cheers,
Jack
Testing the MAPI Mail Store endpoint on the Exchange server.
An error occurred while testing the Mail Store.
Additional Details
Elapsed Time: 333 ms.
Test Steps
Attempting to ping the MAPI Mail Store endpoint with identity: outlook.mg.com:6001.
The endpoint was pinged successfully.
Additional Details
Attempting to log on to the Mailbox.
An error occurred while logging on to the Mailbox.
Additional Details
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.

Hi,
I notice that this issue only impact "some users".
I suggest double confirm whether the Outlook Anywhere configuration set correctly on Outlook client. Pic as blow:
Thanks
Mavis Huang
TechNet Community Support

IMAP Working for some but not others

I am having the issue of imap working for some users and not others. I have for instance 2 users both accounts the same. One account I can link via imap the other I can not. Both have the same group memberships, both are in the same post office. Everyone has imap access I have no restictrions set. Any idea where I should begin to look. The message I am receiving on the account the can get in is: user does not exist.
Thanks

gator17,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Audio Out doesn't work for some devices under 9600m GT; works under 9400m

Similar Messages

Maybe you are looking for