Audio out (headphone) jack will not hold a miniplug for long
This happens just about every day:
I crank up iTunes and start to play a music list. Generally about half way through the external speakers cut out and the sound changes over to the built-in speakers. So, I have to reach around and jam the plug from the speakers back in. It will not go all the way so in a short time works its way out again.
I have tried several plugs just to be sure it isn’t just the one I am using. They all refuse to go all the way in.
Is anybody else having this problem? Is there any cure?
Griff
Bad plug! Got a different patch cord and things are fine.
Similar Messages
-
The audio out (headphone jack) stereo just stopped working.
The audio out (headphone jack) stereo just stopped working. On all my head phones (which work fine on other devices), macbbok pro sound is only coming through the left speaker. Anything I can do about this, aside just bringing it in to the shop? btw: audio output is set to middle.
Before taking to the shop, try Reset PRAM.
Some sound settings are stored in PRAM.
Even though the article title says 10.7 it is applicable to 10.4.
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html -
My Apple iPad 3 is less than 6 months old - purchased in March of 2012. I believe it already needs a new battery. It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in. Please advise - it is very annoying.
Take it to Apple Store. You are covered under your 1 year warranty.
-
I need a new Battery for my I POD Touch. I POD will not hold a charge for more than 10 songs.
Model = M9800LL
Version = 1.4.1The battery in the iPod is not user-replaceable. Take your iPod to an Apple Store or contact Apple Support and they can arrange replacement.
http://www.apple.com/support/ipod/service/faq/
Regards. -
IPod Battery not holding a charge for long
Hi Guys,
can anyone please assist me with my problem? well my 30GB video iPod has not been giving me the lenght of battery power i'm looking for, i love to watch music videos i have 122 music videos and when ever i watch a few like say around 10 or a bit more it would cut out, it does not last a long time at all and i usually charge it for more than 2hrs could it be that i need a battery replacement?
I have tried to get support via e-mail from Apple but i can't seem to find where i can go, please help me!
Dell Dimension 2300 Windows XP Pentium 4 100GB 640MB RAMHello Deggie,
i usually charge my iPod for a long time like 2-4hrs but sometimes i would charge it in the night and i would forget it on so it would charge form like say 8pm sometime after 6am and it still does not hold the charge and i still does know why my iPod was bought on 6th of March 2006 do i need to change the battery? -
I bought this at best buy so should i go to the apple store to see if some techs should fix this or try to get a new one from best buy i bought this around the begining of april and please NO FIX IT YOURSELVES!! i am a clumsy 14 year old also, would having the headset plugged in and wrapping the wire around the ipod be bad for it because i think this could have been the cause thank you and any help would be greatly apreciated
It was not in a pouch i just simply wrap it around the ipod, thankfully my mom and i will be going to apple tommorow. I'm seriously never going to go to best buy ever again, i don't trust them because ive bought a faulty ipod nano from them so i'm going to try to avoid this store thanks lllaaass
-
HT4623 My Ipod Nano will not hold the sound for songs
I have an IPod Nano 6th generation which will no long hold the volume. All else works fine.
MaryThis is the iPod touch forum. I requested your posted by moved to the iPod Nano forum
-
Firefox will not hold a page for my home page
I am running firefox 5 I try to set a certain page for my home page,it will take it,but as soon as I close the browser,and reopen it,it goes back to a search page
Which search page?
Try:
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Preferences_not_saved -
Battery will not hold charge?
MY phone will not hold a charge for more than a couple of hours.
Try using it less.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
3rd Gen iPod Battery will not hold a charge
After fully charging my ipod I turn the unit off and lock the unit, the next day I only have about 2/3 battery power left, 2nd day 1/3 and the 3rd day the battery is fully discharged. I just had the battery replaced hoping this would fix the problem but no help
my 3rd gen Ipod will not hold a charge for more than 4 days after it is disconnected from the charger. The Ipod is turned off and locked.
New battery installed and no help -
The second Earphone jack will not work. My DV6000 is only one month old.
The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
This question was solved.
View Solution.HI,
Robert96 wrote:
The second Earphone jack will not work, but I get static when I plug my earphones into it. The other jack works ok. I need help in fixing it. My DV6000 is only one month old.
One of the jacks is for audio in and the other is for audio out. Some select versions have an S/PD/F jack. Chances are the reason you are getting static is that if you plug an earphone into a microphone jack it will attempt to behave as a microphone. It will not operate properly.
So..a recap. There is only one earphone jack
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
My ipod touch headphone jack do not work when I plug in any headphones to it. How do I get to listen on headphones with my IPod touch?
You likely have a problem with the headphone jack. You jhave to ways to listen to music via headphones:
- Get the jack fixed. Here is one place:
DigiExpress.us - The iPad Repair Professionals
However first I wold rule out a software problem by try the following:
Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup
- Restore the iPod to factory defaults.
The other way is to use bluetooth headhone if you have a 2G or later iPod. -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
I have had my iPhone 4 for about 1 1/2 years, with no problems. A couple days ago the battery drained in about an hour, I plugged it in to charge and it was not charging. After a few hours a message popped up on the screen about the temperature being too hot...the phone was very hot when I picked it up. The battery will not hold a charge and it heats up every time I plug it in. Suggestions???
Make an appointment at the genius bar. An out of warranty replacement is $149. It sounds like it may have gotten wet.
-
What to do If the headphone jack is not working
Go to settings>icloud>storage and back up>back up
after that preform a restore by going to
general>reset>erase all content and settings
this will delete everything except the enabled stuff on icloud.
You can view whats enabled by going to icloud in settings.
Maybe you are looking for
-
Issue in Process Level Workflow
Dear SRM Workflow Experts, I have following issue for workflow in SAP SRM 7.0 We have configured item level shopping cart approval workflow using process level configuration. Total four process Levels are configured for Audit/Deman Challenge/Tax and
-
Notes not carried to Subprocess
HI, A subprocess is being called from parent process, The Notes entered in parent process are not being carried out to subprocess. (Fuego.Lib.Notes are present under Work Item Detail panel --> Notes tab of Workspace) It will be great help, if yo can
-
Validity for Purchase Requisition
Is there any way to set a validity of the PRs that are created manually and that are created out of MRP? Meaning if the PR is not converted into a PO within a month, the PR should become inactive/ closed.
-
Hello, I am creating a simple shoot 'em up game where the player has to blast the meteors. The meteors are instances of Canvas's and the location of each is set by using the setLocation() method. When I press the refresh button on IE, the meteors som
-
E-Rec Internal & External Job Posting
Hi, In my e-recruitment system I am trying to create a job posting that is visible to both Internal and External candidates. I have tried leaving Cand Class field blank in "Define Posting Channels" but this just results in my posting not showing up