Audio out of Sync - Final Cut Pro to Soundtrack and back

I have edited some talking head interviews in FCP 7.0.3
When I "Send to Soundtrack Pro Multitrack Project" and then send back to Final Cut (by exporting an AIFF)
The audio is 9 frames shorter than the original audio. (The video is 06:29:12 long)
I have checked, and double, triple checked, and all audio is 48.0 KHz
Both timelines are Non-Drop Frame.
I have also tried the following when importing the XML back in to FCP
1. Leave Sequence Settings at "auto" with "Override with settings from XML" selected
2. Change Sequence Settings to "Apple ProRes 422 1920x1080 24fps" with "Override with settings from XML" de-selected.
I have looked and looked through forums and haven't found any real solutions, please help

Apparently, fcp can have a problem with imported audio files if the easy setup frame rate does not match your sequence frame rate.
I've seen this reported as well.
I actually created a new project, set up the "Easy Set Up" to match and ran into the same problem.
Initially the Music Tracks I used were a different audio rate (44.1 vs 48) but I converted those as well.
I'll have to chalk this up to user error, but I've truly been over this project with a fine-tooth comb so many times.
In general, it doesn't seem like there should be so much issue going from Final Cut to Soundtrack and back.
When I get some down time, I'm going to completely recreate this project from
scratch and see what happens.
Thank you so much for your time Michael.

Similar Messages

Export Quicktime movie in FCP comes out as a Final Cut Pro Movie File

Does anyone know why when I Export Quicktime movie in FCP it comes out as a Final Cut Pro Movie File? I can still play it in Quicktime and it's possible to set the Quicktime Player as the default software, but it still says in my finder window that it is a Final Cut Pro Movie File.
Does anyone know if there are any settings for the clip to come out as a Quicktime Movie instead? Thank you!

+Jim Cookman :+
+"The studio apps "brand" their exports. Actually kind of useful...+
In the words of the venerable Forest Gump, "Useful is as useful does" ... or something like that.
I actually use similar "icon" techniques in other areas of my workflow. But most of the time I just modify the file title for quick ID - I also use dashes & underscores to get things to stand out and stay at the top of lists etc.
But QT is my Go-To App for quick media reference and I have it set up to play almost all types off media when double clicked. I started doing it years ago when iTunes opened up every time I wanted to check a few seconds of an mp3 file.
I guess the best solution would have been for Apple to leave the "export FinalCut movie" option intact and simply add in an "export Quicktime movie" option as well. Or maybe add another drop down option for the tagging (branding).
At least we would have been able to make the workflow choices in-the-box rather than doing it with the OS.
Andy Neil,
I think using the OS is the better option rather than re-compressing your movie just so you can double click into QT.
best
g
Message was edited by: Goldfish

No audio track anymore in final cut pro timeline

Hi everyone,
God I feel dumb but somehow i shut off audio tracks in my final cut pro. I can see the previous ones down that I laid. But if I try to bring anymore clips into the viewer and then slide them down to the time line there is no audio that comes with it anymore. What button do I click to allow audio to pull down with the video on to the timeline. Weird.

Make sure you have the audio tracks targeted by using the patch panel at the left of the Timeline. Also make sure that the tracks aren't locked.
-DH

Final Cut Pro 4.5 and Quicktime 7 compatibility issues. Error 39!

I see some people saying Quicktime 7 is not compatible with Final Cut 4.5 and some saying it is.
I upgraded to 10.3.9 and then Quicktime 7 and I started getting error 39 at this one spot in my timeline and then crashing if I tried to play just a few seconds ahead of that spot. I tried trashing the prefs but that didn't do any good. The individual files play fine outside the timeline so it isn't corrupt media. I tried rerendering the effects that are at that point but that didn't help. I tried copying the entire timeline to a new sequence and that didn't help.
The strange thing was that when I took the part of the movie that was having trouble and deleted it from the timeline it still got error 39 when just playing over the empty timeline where the media used to be! This led me to realize that the problem lay in some Quicktime audio effects I had about a second in front ot the error 39 spot. I took off the effects from that audio but it didn't help. Then I deleted that audio from the timeline and just pasted it back in from the original clip and then it finally got to working.
Now I know nothing about the software, but I thought there might be some connection between the fact that I had effects that FCP labels as "quicktime effects" on there from my days in Quicktime 6.5, then upgraded to Q7, and perhaps those old effects don't work in Q7? I don't know.
So, my immediate problem is solved but I thought this experience may be of use to someone else. And perhaps some compatibility issues can be brought to light.

I would assume the Software Update program has sufficient logic within it to detect that my friend is running Final Cut Pro 4.0 and it would therefore be disastrous to install QuickTime 7.3, thus removing QuickTime 7.3 from her list of suggested updates. Would someone at Apple please fix this?
Sorry, but Quicktime is a component for SO MANY things, not just FCP. Sorry, but the OS doesn't detect that older versions of software are on there and won't be compatible...this is where you need to have a little knowledge. And sorry, but you need to have a little knowledge. If things are working, DO NOT UPGRADE unless it has been tested and cleared. In the case of FCP 4...it has not.
Rule of thumb...if you use older software, you have to stick to older versions of the OS and components that that software relies on.
How many things were broken with Vista? So many that the HUGE community let out a cry and now XP is available again configured on machines or as a stand alone buy. And no, Vista didn't warn that certain applications wouldn't work either.
You gotta research and find out. This place here...this forum...is a FANTASTIC place to find stuff like this out.
BTW...Apple doesn't read these forums, only us users. Gotta submit feedback here:
http://www.apple.com/feedback/finalcutpro.html
Shane

I have Final cut Pro HD sequence and I need to burn this on a DVD

I have Final cut Pro HD sequence and I need to burn this on a DVD, my sequence lasts 1 hr and 33 minutes. What are my options? Is it better to export as a Quick Time movie or using the compressor? I'm new to the compressor just learning, please help.

Select your sequence in the browser window, go to the File menu and choose Export Using Compressor.
When compressor opens, choose the DVD best quality settings, 120 minutes.
For audio and video both, choose both the m2v video and the AC3 audio. (Dolby Professional)
Choose a destination for your files, and hit submit.
When it's finished, import these files into your DVD SP project, and make your DVD.
Be sure to choose the 16:9 anamorphic settings.

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

HT4722 Can Final Cut Pro be purchased and downloaded more than once?

Can final cut pro be purchased and downloaded on more than one computer?

This is an excerpt from the FCPX license, available here.
http://images.apple.com/legal/sla/docs/FinalCutPro.pdf
2. Permitted License Uses and Restrictions.
A. Mac App Store License. Subject to the terms and conditions of this License and as permitted by the Mac App Store Product Usage Rules set forth in the App Store Terms and Conditions (http:// www.apple.com/legal/itunes/ww/) (“Usage Rules”), you are granted a limited, non-transferable, non- exclusive license:
to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer running OS X (“Mac Computer”) that you own or control; and
(ii) if you are a commercial enterprise or educational institution, to download, install, use and run one (1) copy of the Apple Software for use either: (a) by a single individual on each of the Mac Computer(s) that you own or control, or (b) by multiple individuals on a single shared Mac
Computer that you own or control. For example, a single employee may use the Apple Software on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Apple Software on a single Mac Computer located at a resource center or library.

I have a project in Final cut pro 10.5 and the spinning icon appears with every action and each action takes up to 30 seconds to respond to?

I have a project in Final cut pro 10.5 and every action takes up to 30 seconds for the program to respond . The spinning icon stays up during this time?

Are you using Mavericks. If so you should update FCPX

Final Cut Pro 5.1 and a Macbook

I am looking to buy Final Cut Studio. I was hoping to get some feedback on this question: Must you have a MacbookPro to run Final Cut Pro 5.1 (and the rest of Final Cut Studio), or will it run on a Macbbok without any problems? I would really like to hear from People who has actually have run Final Cut Pro 5.1 on a Macbook and what their experiences were. I know the Macbook does not have the ATI Mobilty Radeon X1600 graphics card like the MacBookPro does. So was that an issue for anyone?
Other OS

Here's Apple's official position: http://docs.info.apple.com/article.html?artnum=303782
However, there are several people running most of the Studio Apps successfully ... except possibly Motion. With FCS2, chances are Color won't run either. You should be able to search here for similar postings; this topic comes up frequently.
-DH

Final Cut Pro 4.5 and Final Cut Express 3.0 - 5 minute captures then freeze

Something I have found with Final Cut Pro 4.5 and Final Cut Express 3.0.
After Updating to Tiger - 10.4.11 and Quicktime 7.4.1 - Both Pro 4.5 and Express 3.0 will not capture more then 5 minutes and 12 seconds. If you are having this issue the solution I used to fix both Pro and Express issues was an update on the software. Final Cut Pro 5 fixed the problem (or 6 if you can) and with Final Cut Express, version 3.5 fixed the issue but if you can go with FCX 4.
Let me know if this helped or if you have found a different solution. Downgrading the os might help but that is too much of a pain and it's time to upgrade the software anyway.

#29: Need AGP Graphics card
Shane's Stock Answer #29 – Error: “Need AGP Graphics card”
http://docs.info.apple.com/article.html?artnum=302667
The Final Cut software is looking for a graphics card type that is required for that version of the software. FCP 4 and FCP 4.5 were released when AGP cards were the requirement. Attempting to open this on a Mac with a PCIe graphics card, such as an Intel Mac, will cause this error. FCP 4.5 is not supported on the Intel Macs. If you happen to have a PowerPC Quad processor Mac and get this error, you can try this hack:
http://www.xlr8yourmac.com/feedback/finalcut_pro_on_oldmacs.html
You can also press the "esc" key as you launch FCP. This enables FCP to open and run, but know that it might not work optimally.
If that doesn’t work, or if you have an Intel Mac, you are going to have to upgrade to a supported version of FCP…and FCP 6, part of Final Cut Studio 2, is the latest version.
Shane

Why am I not able to mark "in" and "out" points in Final Cut Pro 6?

I have a bunch of old tapes that I am trying to put on my computer. I have Final Cut Pro 6 and everything hooks up nicely except I am not able to mark in and out points or use capture now. Does anyone out there know why that would be the case?
I appreciate any help I can get.

What VTR? How is it controlled?
What are your capture settings? Firewire Protocol?
x

Help serious Audio rendering issues within final cut pro

Hello
I have some serious audio issues I am using Final cut 6.05. Here is my problem I am putting a AUParametricEq filter on my audio due wind noise etc. Anyway when i play it back on the time line it plays fine no problems but as soon final cut renders the file say for mastering to tape. at some point at the audio the audio goes all haywire, popping sounds or the audio just repeats it self at one frame or i can here audio from other parts of the timeline. And it just happened before i never had the issue. Is it the update. Hope anybody can help as I need to master about 6 projects to tape to clean my harddrives and all 6 projects have the same issue.

Are your audio files AIFF 48K 16 bit?
In regard to trashing preferences you can download Jon's Prefence manager at this site
http://www.digitalrebellion.com/pref_man.htm
The Old School method follows
Trashing preferences and repairing permissions.
Close Final Cut Pro.
Go to: Users/your user name/Library/Preferences.
Drag, "com.apple.FinalCutPro.plist" to the trash.
Scroll down to the Final Cut Pro User Settings folder.
Drag, "Final Cut Pro 6 Preferences" to the trash.
Drag, "Final Cut Pro Obj Cache" to the trash
Drag, "Final Cut Pro POA Cache" to the trash.
Go to: Applications/Utilities/Disk Utility
Select your system disk
Click on the Repair Permissions button
Wait for the permissions to be repaired
Restart your computer

Final cut pro 4.5 playing back poorly

I've been using Final Cut Pro 4.5 for a year or two now, and suddenly it's been dropping frames like crazy on playback. I just upgraded to OS X 10.4.6, and Quicktime 7.1, and after that, Final Cut Pro hasn't been working right. I use iMovie to import all my footage (just from a regular DV cam) and that works fine and everything plays back fine in Quicktime and in iMovie and in the Finder. However, when I'm looking at my project in Final Cut Pro, it already starts dropping frames and freezing up when my clips are still in the browser and I'm just looking at them in the viewer. They kind of freeze, and the audio keeps going, and then the video comes back a few seconds later, and freezes... Every once in a while I get an error message that says "General Error." I've closed all other applications, disconnected the internet, and Final Cut is still not even playing back my files correctly. Looking at other posts, I made sure no windows were overlapping, I set the zoom to "Fit to Window", I threw out the FCP preferences, everything I could think of. My computer is only an 800 Mhz Powerbook G4, but I have 1 Gig of RAM. The video files are all on an external Firewire hard drive, and both my internal and external drives have a good amount of free space. My laptop is also plugged in with the energy set to Best Performance. And until upgrading my OS, I hadn't had any problems like this. Has anyone else experienced this? Is Upgrading to FCP 5 the only solution (or will that not work either?) please help. Thanks.

I think your problem stems partly because of OS and QT combination you are running. I'm a firm believer in running FCP HD in 10.3 and QT 6 because it was written for that OS and QT combo... I've an article about all of this in the Creative COW magazine.http://forums.creativecow.net/cgi-bin/newpage_wrapper.cgi?forumid=1&page=http://www.creativecow.net/magazine/cowmagsubscribe.html will get you a pdf by registering.
Capturing in iMovie isn't the best either. If you capture with FCP, the DV codec used is optimized for FCP, and you'll find a much happier result.
When you go to an new OS, don't 'upgrade' rather, reinstall it from the ground up... starting with a nice empty disk drive. FCP HD will run the best in 10.3.9 if you don't have a capture card, and in 10.3.8 if you do.
Jerry

I'm running OS X, but I can't run Final Cut Pro 1.0 and appropriate upgrade

I recently purchased a Macbook with OS 10.4.6 on it. I have Final Cut Pro 3, but I can only install it via FCP1 and upgrade to FCP2 and finally to FCP3. However, when I try to install 1.0, it says that this system cannot support it. I can't seem to figure out how to run Classic mode either.
So, my question is, what are my options to run this software? (I really do not want to purchase the newest software.) Also, I know someone who has FCP3 full version (not an upgrade); would it be possible to install this software and use one of the serial numbers from one of my other software disks? Any help would be great.
Thanks!

FCE is more limited but depending on your needs it might be fine
check out http://www.apple.com/finalcut
why do you feel you need to download an upgrade
after FCP 4 (3-4 years ago) you no longer needed an older version installed just the serial number as they discovered the problem that you are running into now
DAVE

Final Cut Pro 7 Log and Capture Frame Sizes

When importing from a Roland VR-5 mixer into Final Cut Pro 7, we get black border/bars on the left and right sides of the preview. We didn't think anything of it, that it might have just been the preview window. These bars are recorded though, it's as if we're not recording the full frame size coming out of our mixer. We went into the settings on the VR-5 and everything was configured to be 720x480, and that the settings in FCP matched. The image still gets cut off. Any ideas?

Some background:
720x480 is a non-square format. It can either be the equal of 640 x 480 (4:3) or 954 x 480 (16:9) depending on what you tell your editing software the incoming stream will be.
If you told FCP the incoming stream is DV/NTSC 4:3 and you are getting a pillarboxed image, FCP is thinking you are sending it a 16:9 version and is filling the the sides to keep the aspect ratio correct.
It would help to know a whole lot more about settings within FCP and what your mixer is putting out.
x

Audio out of Sync - Final Cut Pro to Soundtrack and back

Similar Messages

Maybe you are looking for