Audio out on MacX doesn't work with Quad Capture. Any fixes?

I downloaded the FREE Mac X only to find out that the audio out through my Quad Capture does not work. Any solutions?

Did you download and install the latest 10.9 compatible drivers for the Quad Capture, from Roland?
http://www.rolandus.com/products/details/1166/downloads/
You may need to update the QC itself to 1.04
Read the notes in the “QUAD-CAPTURE_System_Update_Procedure” pdf to achieve this successfully
and then update the Mac drivers to 1.5.1 provided on that page too.
Bear in mind... in the future when there is a major OS X version upgrade like the one from 10.8 Mountain Lion to 10.9 Mavericks, always make sure there are compatible drivers for your external hardware such as your QC from Roland.. before upgrading..

Similar Messages

Want to open Kodak Photo CD files (.PCD) in Photoshop CS5. In CS4 i copied file "Photo CD.8BI" from an older version into the File Format folder. This does not work with CS5. Any fix?

I have several old Kodak Photo CD with PCD image files. I am now using Photoshop CS5. Some years ago while using Photoshop CS4 I copied a file: "Photo CD.8BI" from an older, CS2, version to the Plug-ins/File Format folder of CS4. This does not appear to work with CS5. Any fix?

It can be made to work, but you have to run the 32 bit version of Photoshop CS5, and as I recall there's an additional DLL called pcdlib32.dll that's needed from the old installation.
See also: Open Kodak PhotoCD files in PS CS5 - is it possible? (Win XP)
-Noel

Male to male audio cable for car doesn't work with my iphone 4s?

I have a 3.5 mm male to male cable that I have used in my car so I can listen to my music. It works fine with my iphone 3G, but it doesn't work with the new 4s. Is there a special cable I need to use with it? It's weird, because my earbuds work with either iphone, but not the audio cable. Suggestions??

I have the exact same issue with my new 4S.
I haven't find a solution yet.

M-Audio Fast Track Pro doesn't work with OS X Mavericks Garageband or MainStage 3

I used to be able to use MainStage 3 and Garageband with my M-Audio FastTrack Pro with no problem. Then, when I upgraded to OS X.9 Mavericks, it doesn't work. Avid (who now supports the FastTrack Pro) recently came out with an updated driver that supposedly upgrades for OS X.9 Mavericks (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers), but even after downloading/installing the driver and updating the device, I still can't get it to work with Garageband or Main Stage 3.
It seems that the software sees the M-Audio FastTrack Pro USB, I even see an audio signal in both MainStage 3 and Garageband for my guitar or microphone input, but there is no output sound from the FastTrack Pro to my PA system other than the analog sound (no sim amps or vocal effects work).
Anybody been able to solve this problem?

I had the same problem (Fast Track Pro + Mavericks 10.9.2 > no output sound).
After trying several combinations, I found out an non logical solution, but it did work
What I did:
1) Download the most recent driver update 1.9.4 (http://avid.force.com/pkb/articles/en_US/Download/Fast-Track-Pro-Drivers)
2) Uninstall Fast Track Pro Drive and restart computer
3) After restar, do NOT install again. Just go to the System Preferences/Sound and set Fast Track as your in/output port
Hope it helps!

Adobe air doesn't work with my software any more.

Hi all, I have 2 pieces of software that require adobe air, and lately both have been getting intermittent, both fail at the same time and then both start working at the same time.
I had the suggestion made by support forone that this is a problem with adobe air, and as both require it, and both fail or work at the same time, this seems reasonable.
I have uninstalled it and reinstalled it, no difference. They have also suggested I try it with a different user, and with a different user it works fine.
Windows 7, it should be the latest version of air as I uninstalled and redownloaded and installed just a couple of days ago.
The software that won't work is Market Samurai (cannot connect to google adwords) and Long Tail Pro (cannot connect to server).
Any ideas anyone?
Thanks
Peter

Just tried uninstalling and reinstalling again, same result.
I've been looking around and found the suggestion to post the log in the forum, so here it is:
[2013-06-06:12:52:35] Unpackaging file:///C:/Users/User/AppData/Roaming/com.longtailpro.LongTailPro/Local%20Store/%23Applic ationUpdater/update.air to C:\Users\User\AppData\Local\Temp\flaD4D.tmp
[2013-06-06:12:52:36] Application signature verified
[2013-06-06:12:52:36] Unpackaging/validation complete
[2013-06-06:12:52:36] Converting unpackaged application to a native installation package in C:\Users\User\AppData\Local\Temp\flaE67.tmp
[2013-06-06:12:52:37] Native installation package creation succeeded
[2013-06-06:12:52:37] Starting silent app update of c:\program files. Updating from com.longtailpro.LongTailPro version 2.2.2 to com.longtailpro.LongTailPro version 2.2.3 using the source file at file:///C:/Users/User/AppData/Roaming/com.longtailpro.LongTailPro/Local%20Store/%23Applic ationUpdater/update.air
[2013-06-06:12:52:37] Installing msi at C:\Users\User\AppData\Local\Temp\flaE67.tmp\setup.msi with guid {3FF14E79-D191-C788-6390-9FC9B7677C30}
[2013-06-06:12:52:50] Application Installer end with exit code 0
[2013-06-06:12:52:50] Elevated install completed
[2013-06-06:12:52:51] Launching subprocess with commandline c:\program files\LongTailPro\LongTailPro.exe
[2013-06-06:12:52:55] Application Installer end with exit code 0
[2013-06-06:15:02:32] Application Installer begin with version 3.7.0.1860 on Windows 7 x86
[2013-06-06:15:02:32] Commandline is: "C:\Downloads\Long Tail Pro\LongTailProTrial\LongTailPro2.2.2.air"
[2013-06-06:15:02:32] Installed runtime (3.7.0.1860) located at c:\Program Files\Common Files\Adobe AIR
[2013-06-06:15:02:34] Unpackaging file:///C:/Downloads/Long%20Tail%20Pro/LongTailProTrial/LongTailPro2.2.2.air to C:\Users\User\AppData\Local\Temp\flaBD9.tmp
[2013-06-06:15:02:35] Application signature verified
[2013-06-06:15:02:35] Unpackaging/validation complete
[2013-06-06:15:02:35] Installed app (com.longtailpro.LongTailPro) located at C:\program files\LongTailPro\LongTailPro.exe
[2013-06-06:15:02:41] Cancel request received
[2013-06-06:15:02:41] Application Installer end with exit code 6
[2013-06-08:15:50:39] Application Installer begin with version 3.7.0.1860 on Windows 7 x86
[2013-06-08:15:50:39] Commandline is: -stdio \\.\pipe\AIR_7324_0 -runtime "c:\Program Files\Common Files" -update -silent -logToStdout "c:\program files\longtailpro\longtailpro.exe" file:///C:/Users/Jayden/AppData/Roaming/com.longtailpro.LongTailPro/Local%20Store/%23Appl icationUpdater/update.air 2.2.5
[2013-06-08:15:50:39] Installed runtime (3.7.0.1860) located at c:\Program Files\Common Files\Adobe AIR
[2013-06-08:15:50:39] Installed app (com.longtailpro.LongTailPro) located at c:\program files\longtailpro\longtailpro.exe
[2013-06-08:15:50:39] Unpackaging file:///C:/Users/Jayden/AppData/Roaming/com.longtailpro.LongTailPro/Local%20Store/%23Appl icationUpdater/update.air to C:\Users\User\AppData\Local\Temp\flaF2D6.tmp
[2013-06-08:15:50:39] Application signature verified
[2013-06-08:15:50:39] Unpackaging/validation complete
[2013-06-08:15:50:39] Converting unpackaged application to a native installation package in C:\Users\User\AppData\Local\Temp\flaF3E0.tmp
[2013-06-08:15:50:40] Native installation package creation succeeded
[2013-06-08:15:50:40] Starting silent app update of c:\program files. Updating from com.longtailpro.LongTailPro version 2.2.3 to com.longtailpro.LongTailPro version 2.2.5 using the source file at file:///C:/Users/Jayden/AppData/Roaming/com.longtailpro.LongTailPro/Local%20Store/%23Appl icationUpdater/update.air
[2013-06-08:15:50:40] Installing msi at C:\Users\User\AppData\Local\Temp\flaF3E0.tmp\setup.msi with guid {93646873-59F2-EBAE-D35F-E8AD1C3C162D}
[2013-06-08:15:50:51] Application Installer end with exit code 0
[2013-06-08:16:09:52] Runtime Installer begin with version 3.7.0.1860 on Windows Vista x86
[2013-06-08:16:09:52] Commandline is:
[2013-06-08:16:09:52] Installed runtime (3.7.0.1860) located at c:\Program Files\Common Files\Adobe AIR
[2013-06-08:16:09:59] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2013-06-08:16:10:00] Runtime Installer end with exit code 0
[2013-06-08:16:10:00] Runtime Installer begin with version 3.7.0.1860 on Windows Vista x86
[2013-06-08:16:10:00] Commandline is: -installupdatecheck
[2013-06-08:16:10:00] Installed runtime (3.7.0.1860) located at c:\Program Files\Common Files\Adobe AIR
[2013-06-08:16:10:02] Performing pingback request
[2013-06-08:16:10:03] Failure during pingback request: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032" errorID=2032]
[2013-06-08:16:10:03] Runtime Installer end with exit code 0
[2013-06-09:14:40:29] Runtime Installer begin with version 3.7.0.1860 on Windows 7 x86
[2013-06-09:14:40:29] Commandline is: -arp:uninstall
[2013-06-09:14:40:29] Installed runtime (3.7.0.1860) located at c:\Program Files\Common Files\Adobe AIR
[2013-06-09:14:40:38] Runtime Installer end with exit code 6
[2013-06-09:14:42:08] Runtime Installer begin with version 3.7.0.1860 on Windows 7 x86
[2013-06-09:14:42:08] Commandline is: -arp:uninstall
[2013-06-09:14:42:08] Installed runtime (3.7.0.1860) located at c:\Program Files\Common Files\Adobe AIR
[2013-06-09:14:42:17] Relaunching with elevation
[2013-06-09:14:42:17] Launching subprocess with commandline c:\program files\common files\adobe air\versions\1.0\resources\adobe air updater.exe -eu
[2013-06-09:14:42:17] Runtime Installer begin with version 3.7.0.1860 on Windows 7 x86
[2013-06-09:14:42:17] Commandline is: -stdio \\.\pipe\AIR_5764_0 -eu
[2013-06-09:14:42:17] Installed runtime (3.7.0.1860) located at c:\Program Files\Common Files\Adobe AIR
[2013-06-09:14:42:17] Starting runtime uninstall. Uninstalling runtime version 3.7.0.1860
[2013-06-09:14:42:17] Reinstalling c:\Program Files\Common Files\Adobe AIR\Versions\1.0\setup.msi
[2013-06-09:14:42:23] Uninstalling product with GUID {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-06-09:14:42:25] Runtime Installer end with exit code 0
[2013-06-09:14:42:25] Elevated install completed
[2013-06-09:14:42:25] Runtime Installer end with exit code 0
[2013-06-09:14:49:46] Runtime Installer begin with version 3.7.0.1860 on Windows Vista x86
[2013-06-09:14:49:46] Commandline is:
[2013-06-09:14:49:46] No installed runtime detected
[2013-06-09:14:49:49] Relaunching with elevation
[2013-06-09:14:49:49] Launching subprocess with commandline c:\users\user\appdata\local\temp\air642e.tmp\adobe air installer.exe -ei
[2013-06-09:14:49:52] Runtime Installer begin with version 3.7.0.1860 on Windows 7 x86
[2013-06-09:14:49:52] Commandline is: -stdio \\.\pipe\AIR_6344_0 -ei
[2013-06-09:14:49:52] No installed runtime detected
[2013-06-09:14:49:52] Starting silent runtime install. Installing runtime version 3.7.0.1860
[2013-06-09:14:49:52] Installing msi at c:\users\user\appdata\local\temp\air642e.tmp\setup.msi with guid {A0087DDE-69D0-11E2-AD57-43CA6188709B}
[2013-06-09:14:49:59] Runtime Installer end with exit code 0
[2013-06-09:14:49:59] Elevated install completed
[2013-06-09:14:50:03] Launching subprocess with commandline c:\Program Files\Common Files\Adobe AIR\Versions\1.0\Resources\Adobe AIR Updater -installupdatecheck
[2013-06-09:14:50:03] Runtime Installer end with exit code 0
[2013-06-09:14:50:04] Runtime Installer begin with version 3.7.0.1860 on Windows Vista x86
[2013-06-09:14:50:04] Commandline is: -installupdatecheck
[2013-06-09:14:50:04] Installed runtime (3.7.0.1860) located at c:\Program Files\Common Files\Adobe AIR
[2013-06-09:14:50:05] Performing pingback request
[2013-06-09:14:50:05] Failure during pingback request: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2032" errorID=2032]
[2013-06-09:14:50:05] Runtime Installer end with exit code 0

I upgraded to Firefox 8.0 and java script no longer works. I set the options to allow java script in the tools/options to allow java script but it still doesn't work. Are there any fixes?

I support several web sites that I developed for clients and I use java script to manage/show slide shows. After upgrading to 8.0 my scripts don't load. When I click on preview on my web development tool my page will not load the java script - nothing shows on te screen. All used to work OK and still works in IE.

Thanks for the response, Karsten,
However, no Divx 5 Component but I did have a Divx Decoder Component and a Divx 6 Decoder Component, so I tried what you suggested anyway with those but to no avail.
Still not working!
Regards,
John

HttpServletRequest.isRequestedSessionIdValid() doesn't work with SSL

In OC4J 9.0.3, when SSL is enabled, the call to
HttpServletRequest.isRequestedSessionIdValid() method doesn't seem to work. It always returns false when it is called even though the session has not yet expired.
On the contrary, when SSL is disabled, the HttpServletRequest.isRequestedSessionIdValid() works correctly as specified in the servlet specification.
Can anyone in this forum explain to me why HttpServletRequest.isRequestedSessionIdValid() doesn't work with SSL? Any solution for that problem?
Thanks in advance.

Hi Sanjit,
I've tried this on multiple PCs and get the same problem everywhere.
See picture with IE11 and chrome.
Sincerely,
Davy

MPEG-2 Plugin doesn't work with SVCD ?

Hi,
I just purchased the rather expensive MPEG-2 plugin for Quicktime, only to find that it doesn't work with a .mpg I have on a SVCD. Apple support in Australia have bent over backwards to help without success - apparently it just "doesn't work". Customer relations in Australia have, by comparison, been extremely poor in addressing my complaint (ie, they won't provide a refund).
I guess this is a warning to anyone who assumes the premium priced MPEG-2 plug-in for Quicktime will play what just about every other cheap downloadable MPEG2 player will.
Paul

There should be no quality loss as longs as the ripped CD is in good shape...
(XS)VCD disks have very little error correction -- that's why you can put as much as ~797.9 MB of MPEG2 data on a "80 minute CD" in (XS)VCD format, while you can put only ~703.1 MB if you treat the same CD as a regular data-CD. ...and audio-CDs use no error correction at all so you can put ~807.5 MB on an that CD if you treat it as an audio-CD!
So a data-CD holds less stuff but it is more reliable to get a bit-for-bit copy back from it.
So: if the (XS)VCD or audio-CD has a small defect and you rip it, then the application must sometimes guess and make the ripped data out of thin air. Luckily the human ear/eye don't usually notice any quality loss, though.
http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#calculations

Elite Pro doesn't work with 5.1 setti

Hi, recently i have changed my card from xtreme audio to elite pro
It was working fine during xtreme audio when i set all to 5.; when i changed to elite pro, the 5. setting doesn't work.
The center speaker sound comes out from woofer, and the woofer is working as it should..
My only problem now is center speaker doesn't work with elite pro.. Is there any solution?
I have newest drivers, all installed well without error; I have check all the jacks and they are well plugged..
I have tested all the speakers, no errors, changed back to my old card and it works well with 5.
Please help?

For some reason, this resolved itself today.
It still occurred with 10.10.2, and I returned to the Apple Store to have it looked at. After checking, their assessment was that it was something to do with Yahoo servers, for that account. They referred me to Yahoo.
This morning, the Inbox loaded!!! The issue is now fixed. I hope others are seeing their issues resolved as well.

Satellite M40-129: PCMCIA Card doesn't work with Linux

I have D-Link DWL-G650 with Atheros Chipset which is good supported under linux (madwifi). But if I boot Linux the card is not found. I tested the card with an Fujitsu Siemens Notebook and it worked out of the box!
Any idea why it doesn't work with my M40-129 ?

Hi
Like you know Toshiba doesnt support the Linux and there are no Toshiba drivers for the Linux OS but I was able to find this useful Toshiba page about the notebook configuration with Linux:
http://newsletter.toshiba-tro.de/main/
You should check the OS machine compatibility and the other areas.
Im sure you will find many useful tips.
Good luck

Media Encoder CS4 doesn't work with Premiere (pic related)

Oh hai!
I just got Adobe Master Collection CS4 and my Media Encoder doesn't work with Premiere CS4. When I try to export the file, Encoder starts normally. Then I click "Start queue" and Encoder starts loading. Loading takes almost five minutes, which is a long time, because my project is very simple. After that nothing happens, just a warning sign appears. When I click it open, some kind of log file open and it says:
Encoding failed
Could not read from the source. Please check if it has moved or been deleted.
And I didn't deleted anything. So what does that mean? Why that "Source Name's" path is different than my project files path? Can this problem relate that somehow?
I have also another problem with Premiere CS4, maybe there's a link between these two problems. I can't get Premiere projects linked to open in Premiere CS4. When I right-click the project icon, and click “Open with…”, I can't find Premiere from the list. When I click "Browse", I can find Premiere.exe from my computer, but if i doubel-clicked it, nothing happens. It won't appear to the list or anywhere else. Or have I missed something? So now the project files are linked to open in After Effects. Of course I can open projects from Premiere, but how do I get them open straight from file?
I have long experience using Adobe Premiere and this is the first time I got this kind of problems. I have also downloaded new updates for Premiere and Encoder, this didn't help. Does that matter, that I didn't installed Premiere in C-drive? However it's in my computers internal drive, I have divided my hard drive for five parts, one part contains all of my softwares. My scratch disks are in different hard drive (external), does that matter? I tried different location, but that didn't help.
Please help, I can't do any video editing, because of this problem. And sorry for my english, ask if you didn't understand something. =)

Hello, this is terrible problem, which i found in CS 6 softwares ...
solution i found only working, is uninstall and reinstall full package.. but it is not all,
you need to do BRAND NEW admin account in windows, and install it there.
that means, i could not export after repair from encoder in my original account never more (!!)   .. this is really terrible way how to repair this issue, because :
1.by reinstalling of software, client WASTE HIS TIME
2.by necessity to begin work in another windows profile you again WASTE YOUR TIME because of learning and migrating all other profile modifications, which i see really unaccpetable. Adobe means, this solution of repair is ok, and they did not do till today any steps of creating some "clever" solution.
I ask everybody, who will meet this issue in future, guys, please, complain about this situation, give "BUG Report" to them, and write "feature request" to them , in the way of creating some repair tool, which check actual "broken" connections between encoder and premiere, which refuses to "take material" from it and encode, and REPAIR it automatically..
   I am not IT, but ..does it seems so hard to create this ? Adobe IT developers should know their systems, and should create such utility tool really easy.
History of this problem and detailed description, HOW i did "repair" this. With wasting of app 2,5 days of my working time :
1. after repairing "error 5" problem , i solved it by reinstalling the suite from the new admin user profile (profile B) .
I continued my work on my normal working windows profile . (profile A)
Every cooperation (AE+Pr, export media via "queue" to Encoder) was working fine . . .
2. suddenly it stop working (without knowing any possible reason - i did not do installations )
and showed in error export log file :
"Could not read from the source. Please check if it has moved or been deleted."
3.repair via procedure(procedure "a"):
i did this procedure on the profile B (profile from last time installation of repairing problem error 5)
I did these steps :
a-uninstall master coll suite
b-i used Adobe cleaner tool (remove ALL)
c-removed raw directories in locations
•C:\Program Files\Adobe
•C:\Program Files(x86)\Adobe
•C:\Program Files\Common Files\Adobe
•C:\Program Files(x86)\Common Files\Adobe
•C:\ProgramData\Adobe
d-removed these links from registry file
•HKEY_LOCAL_MACHINE\SOFTWARE\Adobe
•HKEY_CURRENT_USER\Software\Adobe
•HKEY_LOCAL_MACH INE\SOFTWARE\Wow6432Node\Adobe
•HKEY_CURRENT_USER \Software\Wow6432Node\Adobe
e-restarted the PC
f- newly installed the Master Coll CS6
g-update the software
result of repair of "3" : problem still exists
4.Ok i find out after coordination with support, it should have been created ANOTHER NEW admin account.
4a:so i did the same procedure (uninstalling) in profile B
4b: and then i created brand new admin profile (profile C)for INSTALLATION of software
4c: restarted the pc (and did not updated it yet)
result :
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile C) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile B) : export WORKS
==exporting of any sequence/raw/AE link video material from premiere via "queue" (Encoder) (profile A) : export DOES NOT WORK ! ! !
(in profile A, is possible to export some raw video material in encoder which is imported to it via "drag and drop)
problem i see:, i have my basic profile A, which i am interested to work, because of all my directory modifications are in there..
this issue should be some "broken" connections between encoder and premiere, which refuses to "take material" from it and encode.
what i expect :
to get from Adobe some repair tool, which automatically checks these connections and repair if necessary, without necessity of founding the new profile and reinstallation of whole software.. this is madness !
what i do NOT expect from Adobe:
to get from Adobe advice of kind : you have to reinstall full software in new admin profile. sorry , we do not know the solution, because we do not know, how do behave our software.

Apple tv mirroring doesn't work with ipad 2

Apple tv mirroring doesn't work with ipad 2 and last update achieved

you have to be sure that you have iOS 4.4 on your Apple TV. Apple pulled 4.4 due to problems and hasen't re-released it yet. the only way now is to hook it up to your computer with a micro USB cable and then in iTunes you should see your Apple TV and do a restore and it will then put 4.4 on the Apple TV but it will wipe out all your settings and you will have to do all that over again but mirroring will then work.

Apex 4.2 pre-prod Theme 50 doesn't work with BlackBerry 6.0

The theme 50 in the pre-pod 4.2 on apex.oracle.com doesn't work with BlackBerry version 6.0. Input fields turn black with black when they get focus
This is a Jquery Mobile bug.
See
http://stackoverflow.com/questions/11870842/how-to-fix-a-blackberry-browser-input-from-going-black-on-focus
https://github.com/jquery/jquery-mobile/issues/4828
https://github.com/jquery/jquery-mobile/issues/4836
Any chance of implementing a work around or patching JQM?

Putting the second suggestion at Stack Overflow into the in-line CSS seems to have done the trick.
.ui-btn.ui-focus, .ui-input-text.ui-focus, ui-input-search.ui-focus {
outline: none;
-webkit-box-shadow: none;
There is still an issue that when a link is selected it show the same behaviour but that's more liveable with and I haven't given up hope of finding the class which is causing it.
The JQM guys look like they have a solution too but I couldn't work out which version it would be applied to.

Apple Firewire to Thunderbolt doesn't work with my Infrasonic Deux sound card

Hello! My soundcard "Infrasonic Deux" doesn't work with Apple Thunderbolt to Firewire adaptor on my macbook pro 15 retina. On the other mac's the same problem! Via Firewire my soundcard work as well! but it doesn't work with Adapter! Help, please!

If you purchased an unlocked iPhone at an Apple store, it should be useable with any SIM. Its possible they just made a mistake and gave you the wrong model phone or there is something wrong with that phone. If that is the case, just take the phone and your receipt to an Apple store, explain the situation and they should swap it out for an actual unlocked one.

Why EL doesn't work with custom tags ?!

I don't know why expression lang. doesn't work with me.
here's an example, and please tell me why :
--- the jsp page with EL ==> doesn't work :
<%-- In the name of ALLAH most gacious most merciful --%>
<%@ page language="java" %>
<%@ taglib uri="/cartlib" prefix="cart" %>
<html>
<jsp:useBean id="product" class="ch16.cart.ProductCatalog" scope="application" />
<cart:showCatalog productCatalog="${product}" addToShoppingCartUri="<%= response.encodeURL("AddToShoppingCart.jsp") %>" />
</html>
when using expressions instead, the page works .
the new page is :
<%-- In the name of ALLAH most gacious most merciful --%>
<%@ page language="java" %>
<%@ taglib uri="/cartlib" prefix="cart" %>
<html>
<jsp:useBean id="product" class="ch16.cart.ProductCatalog" scope="application" />
<cart:showCatalog productCatalog="<%= product %>"
addToShoppingCartUri="<%=
response.encodeURL("AddToShoppingCart.jsp") %>" />
</html>
The error was :
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: jsp.error.beans.property.conversion
org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper
.java:512)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:377)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
root cause
org.apache.jasper.JasperException: jsp.error.beans.property.conversion
org.apache.jasper.runtime.JspRuntimeLibrary.getValueFromPropertyEditorManager(Js
pRuntimeLibrary.java:885)
org.apache.jsp.ShowProductCatalog_jsp._jspService(ShowProductCatalog_jsp.java:77
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.20 logs.

Regarding setup, see this post reply #6
http://forum.java.sun.com/thread.jspa?threadID=629437&tstart=0
Other potential things to check: make sure you are getting the right value passed in
productCatalog="${applicationScope.product}"
${product} by preference would take a pageContext, request or session attribute before the application level one (it uses pageContext.findAttribute).
What do you get if you just print out ${product} on the screen?
It should call a toString() on it for rendering purposes.

Audio out on MacX doesn't work with Quad Capture. Any fixes?

Similar Messages

Maybe you are looking for