Audio Out only one channel

There was a previous topic on just this issue but it was archived and I did not see any resolution. I am having the exact same problem with my computer. Sound only comes out of the left internal speaker, and only comes out of the left speaker when plugged in to headphones, external speakers, etc.
Does anybody know what the problem is? Thanks!

Wow, I feel like an idiot. Is there any reason why this would randomly happened because I certainly never changed the balance. Although, I do share my computer with my fiancee now, and nothing is out of the realm of possibility when she uses it...

Similar Messages

  • Exported Audio Voiceover Only One Channel

    I created a quicktime screen recording for a screencast/tutorial using QuickTime X.
    Brought that clip into FCPX, added some music, a few transitions and some motion graphics/titling.
    Exported to h.264 and I'm getting stereo from the music track, but the voiceover is only on one channel.
    So I go to audio settings and batch change everything to Mono. I noticed that there are surround sound settings, that is, multiple audio 'tracks'.
    Export and only one channel.
    When I monitor in FCP X I heare the audio out of both channels.
    When I export it using FCP X H.264 to quicktime: Audio Only On One Channel
    Killing me.
    So I I loaded the H.264 exported clip into QuickTime Pro 7
    Anyway, In QT 7 I changed all the settings for audio (properties) and turned every channel that showed up to mono, saved as and the QuickTime file now plays voiceover audio on both channels. Yeah!! So it seems.
    So I save as in QuickTime 7 and when I play in QuickTime 7 I get the Soundtrack/Voice over audio on two channels.
    But when I open it in QuickTime X (or upload the file to YouTube/Vimeo) the voiceover only comes through on one channel. Keep in mind that the stock Music does play through both channels!

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • Please Help - Audio Exporting-Only one channel

    When I export the audio from Final Cut, I get only one channel of audio ( right side). This happens with all the AC3 and PCM audio settings.
    All of the settings are correct in Final Cut. I have dual output audio on the meters and playback. I've also done a complete troubleshooting check on my playback system to make sure that everything is working properly. It is. I tunes plays everything back in stereo as does final Cut.
    Any suggestions? I'm really behing the 8ball at this point.
    Thanks,
    Bigsul
    g5   Mac OS X (10.4.7)  

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • Audio Out only 1 Channel

    My audio out jack is only putting out 1 channel. Is there a connection I should check? Or be looking to replace something...
    Thanks for any advice!
    Also, please let me know if I should post this in another forum...

    I have audio out the left side only when using the speakers. Both channels work fine when using the audio jack.

  • Audio - only one channel

    Hi
    I'm recording from my analog cassette deck to my mac os x 10.9.5, but get only one channel on audacity and garage band.
    deck out - headphone jack -rca to rca mini jack mac sound input
    I did read several posts, but to no avail.
    I did play with AUDIO MIDI setup
    I did play with SOUND ( SYSTEM PREFERENCES )
    please help
    thanks in advance
    peace

    Come on... It's just like a usb turntable, only a little better quality. What steps would you use to troubleshoot one of those?

  • Why does my nested sequence have only one channel of audio?

    Hi,
    Working in Prem Pro CC on my Mac Pro.
    I have  a number of interviews, each shot with 3 cameras and with audio from a separate audio recorder. The audio has two channels, Ch1 has the boom mic and Ch2 a radio mic.
    I created a sequence, placed the audio into channels 1 & 2 (they are linked) before placing the video tracks onto timeline tracks 1-3. Everything's synced nicely and so I nested the shots and then I enabled multicam on the nested sequence.
    However, now when I edit the nested sequence into my edit sequence, it has only one channel of audio. I tried Modify>Audio Channels but within that page, in the option to select 'Source Channels' the options are "None" and "Channel 1".
    How do I get my nested sequence to place both audio channels into my edit sequence?
    Any help much appreciated.

    Nevermind folks, I figured it out. I had my render control settings set to Apple Pro Res on some timelines.

  • Audio Channels. Only one channel is playing

    For some reason only one channel is playing a signal on a couple of clips. The other clips are fine.
    All I did to the clips in question was increase the DB levels.
    How can I adjust it so that I get signals on both audio channels?
    Thanks

    duplicate post: http://discussions.apple.com/messageview.jspa?messageID=10578624&stqc=true

  • The headphone jack on my iPod Touch Gen 2 is intermittent. I get sound sometimes out of one channel and sometimes both depending on how I hold the headphone jack.  Is this a costly repair?

    The headphone jack on my iPod Touch is intermittent.  I gat sound out of one channel or both depending on how I hold the jack.   It is making intermittent contact.  Is this a costly repair by Apple?   Can I do this repair myself?
    Thanks

    Here is a third-pary place. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Apple will only exchange your iPod for a refurbished one for:
    Apple - Support - iPod - Repair pricing
    Here are instructions for doing it yourself
    iPod Touch Repair - iFixit

  • Why only one channel of sound in sequences?  Please someone try this quest

    When I add a sequence to a sequence, I have only one channel of sound but, when I open that sequence I have 2 channels of sound.
    Is it a sequence setting and if it is I see:
    outputs 2
    downmix 0
    grouping: Stereo selected
    Dual mono not selected.
    I swith these around a bit but get no change.
    My raw footage say "2 Mono" from my Sony DSR PD-150 at 16 bit, 48 khz.
    I usuall use one channel for camera sound and 2nd channel for mic.

    the number of audio channels that your nested sequence will contain is the same as the number of audio outputs you have selected for that sequence ...
    for example, if you create a sequence with 10 tracks of audio, but have only set the sequence to have 2 audio outputs, then when you nest that sequence the nest will have only 2 tracks of audio ... change the audio outputs to 4, or 6, or 8, or 10 etc regardless of how many tracks you actually use, and the sequence, when nested, will have the same number of audio tracks as the sequence has audio outputs
    ... ok, so that explains the relationship between audio outputs and the number of tracks of audio that a nested sequence contains
    so why are you getting only one channel of sound when you edit it in to another sequence? my guess is that you are only patching 1 channel ... load the source sequence into the viewer (drag and drop), now check in the patch bay area at the left of the timeline window to make sure that your a1 to A1 and a2 to A2 connections are not broken ... and edit it in.
    cheers
    Andy

  • I'm deaf in one ear and need a stereo-to-mono earbud so I can use my iPod and iPhone. It is not good being able to hear only one channel. Can Apple consider making such a thing for those of use who need such a thing?

    I'm deaf in one ear and need a stereo-to-mono earbud so I can use my iPod and iPhone. It is not good being able to hear only one channel. Can Apple consider making such a thing for those of use who need such a thing?

    bassvid wrote:
    Thanks...now I need to do something about the iPod.
    I'm not sure which version iPod you have, but I just checked my iPod nano (current generation) and it also has a Mono Audio setting in Settings>General>Accessibility.

  • Only one channel plays

    I am only getting sound out of one channel of the ipod. I have tested this via the ear buds, but also by routing the sound to my stereo -- only one channel has any sound on it. Is there some setting or something simple that can be done to fix this?

    i dont beieve there is anything you can do. but im not an expert, so take it into an apple store and ask someone for help.
    (some key information here would be what model it is so others know about it).
    HP Media center PC   Windows XP  

  • Only one channel working - fixable?

    Recently my ipod starting playing only one channel through headphones or a speaker jack - eg I can hear only whatever is coming through the left side speaker. I've verified that the problem is with the ipod, not the headphones. However, if I put pressure from a specific angle on the headphone cord right above where it connects to the ipod, both L and R channels work. This goes away again when the pressure is released.
    Has this happened to anybody else? Is it a fixable problem?
    Thanks!

    You need to replace the headphone jack on the iPod.

  • My Ipod is 5-6 years old.  Suddenly, I'm getting audio through only one ear bud.  Is this a common occurrence?  And does this just mean I need to replace them?

    My Ipod touch is 5-6 years old.  Suddenly, I'm receiving audio through only one ear bud.   Is this a common occurrence?  And does this just mean I need to replace them? 

    It's fairly common for headphones after extensive use (5+ years).  If you have another set of headphones (any type with same connector), try it with the iPod to determine if the fault is on the headphones or on the iPod.  Or you can try the same headphones with another device, to see if they are working fine or you get the same audio problem.

  • Can get sound from only one channel

    I am having trouble with my sound.  I am able to get sound fron only one channel.  Is this something I
    can fix or do I need to go to an apple store?

    Did you check System Preferences>Sound to make certain that the balance scroll section was in the middle?
    Clinton

  • Ipod classic sound from only one channel

    My 80GB Ipod classic has sound from only one headphone. Same problem when docked so it's not a headphone or socket problem. It's as if only one channel is working. Any ideas?

    Did you check System Preferences>Sound to make certain that the balance scroll section was in the middle?
    Clinton

Maybe you are looking for

  • Went iTunes 7 to iTunes 6, now iPod can't sync

    How do I get around this problem? Can I restore the iPod's firmware without going through iTunes 7 again? I updated iTunes to 7 (big mistake) and iPod firmware as well earlier today, but now I've gotten rid of the problematic iTunes 7 the iPod won't

  • When I add a watermark and flatten the transparency, it duplicates the file within the file.

    When I add a watermark and flatten the transparency, it duplicates the file within the file.  (a 105 pg file becomes 210pgs)

  • CSS for WSRP Struts Portlets

    I have a Struts 1.3 Portlet running in WLP 10.3.2. The css inside JSP displays right in a web-app. But when I expose over WSRP, the css is not getting applied. Here is the simple jsp I have: test.jsp <style type="text/css"> .test{ border: 2px solid r

  • Remove role or user from position

    Hi all, we are on ECC 6.0; we are using indirect role assignment. We looking for a way to automate the removing of a user (US) or role (AG) from a position (S). eg. remove user 123456 from position 50000001 and user 654321 from position 50000002 in o

  • Problems to finish a ./configure

    Hi! I would like to install one program and when i make a ./configure the last lines are: +...+ checking for FIXME existence of three headers... no checking for getmntinfo function... no checking for getmnt function... no checking for next_dev... no