Audio out type
Hello,
I am connecting a Klipsch ProMedia 2.1 audio system to my iMac. Since the system has its own internal amplifier, the manual instructs to hook up the audio system into the line out connector of the soundcard. The manual states that "connection to the speaker level output jack might result in the poor sound quality."
I would like to make sure that the iMac audio out is indeed a line out type. Based on the Technical Spec page, I believe that it is a line out, but I am not sure. I would appreciate it if someone could confirm it.
Also, I would be interested in comments on whether the vendor is not overstating the potential problem of plugging the audio system into a speaker level audio output, if this is the case for the iMac.
Thanks in advance
Hi Dennis,
Thanks for your prompt reply. I plugged the system in, and it works great.
I don't know about the Creative Inspire, but this one is definitely better than two small unpowered speakers that I have used for years. Now, the iMac replaced the old PC, and clearly the old speakers had to go.
I appreciate the tips on volume and boot sequence. The only other item that I wish I could resolve is how to switch between external and internal speakers without unplugging the system from the audio jack. I am not sure that I want to keep the audio system on all the time. However, browsing the forum, I came across the explanation that the jack has a hard-wired sensor, so it seems that software would not be able to override it. Please let me know if I misunderstood the post, and such functionality does exist.
Thanks again.
Similar Messages
-
What type of connectors needed for optical audio out?
Hi, looking at upgrading to an imac and I noticed on the spec it has optical audio out which would be great to go into my audio interface. What connector do I need? Is it TOSLINK type?
Had a look at the picture of the rear but couldn't see an optical out port, only the jacks for analogue. Where does the optical come out!?
Thanks!If you want to connect the iMac to something that has Toslink then you would need a cable similar to this:
http://www.amazon.com/6ft-Toslink-Mini-Cable/dp/B000FMXKC8/ref=pdcp_e_1?pf_rd_p=413863501&pf_rd_s=center-41&pf_rd_t=201&pf_rd_i=B0002MQGRM&pf_rd_ m=ATVPDKIKX0DER&pf_rdr=1TDMZGX7YP22Q17RP1X3
I use one myself, they work fine. -
Error: A Error Occured While Trying to Update The Default Audio File Type
Whenever I do anything in the preferences, when I back out and close the prefs, I get this error:
"An error occured while updating the default audio player for audio file types. You do not have enough access privileges for this operation"
I do have Admin rights on my own computer. This happens with 6.0.4 which I just installed.user10163762 wrote:
Thank you Eugen and Hussein.
The problem is not with the template.
It seems to be a problem in that particular instance.
Uploaded it in a different instance.
However once i run the program, i cannot view the output as the browser window flashes and disappears.
My colleague says , it is to do with the trusted site to download something from the browser.
Can you please guide me on how to fix this ?
http://bit.ly/1k8e2vi
Thanks,
Hussein -
Optical audio out turns off during silence
My optical audio out port turns off when no sound is being played. When a sound is played my speakers pop as the receiver switches into optical mode. This takes a second so I miss system sounds. I would like to set the optical out to always stay on, even when I'm not listening to music so I can hear these sounds and avoid popping. Does anyone know how to accomplish this?
Note that there are several different ways that an iPod or Nano can support TV output, depending on the iPod model & type of connection. The charts at iPod and iPhone: TV out support may be of some help with this, but it still can be confusing, depending on which of the two Apple docks with very similar names you might have used, or if you used any third party connection products.
Because of this, it probably would be best for each of you asking for a solution to describe in detail which items you used in your connections, & which of the TV's video input jacks that you plugged the output connectors into. -
I DELETED MY AUDIO OUT PUT DEVICE BY ACCIDENT COS I HEARD STATIC IN THE SOUND AND NOW I HAVE NO SOUND THE LITTLE SPEAKER SYMBOL HAS A RED CIRCEL N AN X IN IT SAYING NO AUDIO OUT PUT INSTALLED IT CAME WITH MY LAP TOP N IM TOLD ITS A FREE DOWN LOAD BUT WHEN I GO TO REAL TEK SITES ITS ALL CONFUSING CAN ANYONE PLZ HELP AND WHERE ON THE PUTER TO I GO TO SEE WHAT VERSION OF WINDOWS IS ON IT
Hello mbradford1199. I understand that you are being told that you have no audio output device installed.
There are two possible soundcards for this notebook and each has its own driver. There is a Realtek device and a Contexant device. First try to install the Realtek device, here is a link. If that driver does not work for you I suggest trying the Contexant driver. Here is the link.
If neither of these drivers work I'd like to see if Windows is detecting a sound card at all. Try the following.
Click Start, type "Device Manager," and press Enter.
Do you have a "Sound, video, and game controller" section? If so, expand it.
List everything you see here.
I will keep an eye out for the results. Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue. -
I need to digitize some cassettes and records since they are (especially the cassettes) are getting pretty worn out, and i'm down to my last working record player.
I'm just looking for some sort of cable where I can plug the 2 audio-out wires (red and white) into one end, and the other end can connect into my MBP. I'd record the audio in Audacity.
I tried doing my own search but i'm not sure what exactly will get the job done. I see things connect through USB, through the line-in jack (I don't even know where that is).
So if someone could just simply tell me what wire (or wires) to get, that would be very helpful. Thanks.Mark,
With just the MBP and no other types of devices, this could be slightly difficult. There are RCA to single 1/8" adapters out there, but this could sacrifice some quality, and I'm not sure how picky you are about your sound. For me, I want my sound quality to be top notch, because I'm a musician and I can't stand bad quality.
I suggest this, http://www.musiciansfriend.com/product/ARTUSBPhonoPlus?sku=180642X
Take a look at the photos. You've got your RCA ins in the back. This little guy plugs in via USB, so you can record directly to your Audacity prog with no sound sacrifice through adapters.
Hope this helps some...
Good luck -
Micro usb audio out feature addition request
so i had a pair on micro usb headphones out and i thought it would work on my stream 7, because of the buzzing problem. However it doesnt work and windows dosnt seem to read it either. Any way for a bios update for the stream 7 so micro usb audio out will work, and any hp prgram for them to make, so i can use headphones.
This question was solved.
View Solution.I know of no device that has OTG "Built in".. so with that said...Micro USB headphones are in more of a testing phase, and only supported by a select few phones/tablets. The device itself has to be "usb headphone aware" because normaly none of these devices default to host mode (ie none of them react to usb connections in the same way a PC/laptop does).
USB phones have been around for a while, and if MicroUSB headphones have a fall back that allows it to be detected as a sound device by any usb host port then using an OTG cable (You will probably need an adapter to convert the Type A connection back to Micro B) it should work fine on the Stream 7. However my understanding is microusb headphones are being designed around a more direct support from mobile devices, much like MHL offered HDMI over usb. -
Connecting to iMac optical audio out/ overall audio quality?
Just curious if anyone has done this yet? The iMac says it has optical audio out through the headphone jack but without an adapter I can't see how that's possible. My speakrs accept optical audio in and I really want to connect them to my future iMac. If not, how's the optical from the headphone jack? Is it possible to get 5.1 surround from that port?
firefighterpilot1 wrote:
The iMac says it has optical audio out through the headphone jack but without an adapter
I can't see how that's possible.
There are two "standard" optical-digital-audio connectors -- the original "square" one is
still used in most larger audio/video components. The newer/smaller one, used mainly in
portable gear, is exactly the same size as a mini headphone plug. The iMac's audio jacks
support either analog or digital-optical connections -- depending on which type of plug
is inserted.
Radio Shack carries adapters/converters/cables of both types (usually at outrageously
high prices). For online vendors, try http://monoprice.com -- great prices and a good
reputation for quality/service among the HDTV-fanatics on avsforum.com.
http://www.monoprice.com/products/product.asp?cid=104&cp_id=10423&cs_id=1042301&pid=2671&seq=1&format=2
Is it possible to get 5.1 surround from that port?
http://www.thismuchiknow.co.uk/?p=24
Looby -
Pop Noise from Audio Out While Using iTunes 9.0.1
I have a black MacBook with Leopard 10.5.8 and iTunes 9.0.1. I have a a pair of computer speakers plugged to the MacBook's audio out minijack. Every time I run iTunes to play my music everything goes fine until I stop the music (you know with the space bar or the stop button). 30 seconds after I stop the music a loud pop noise comes up and stops, as if some electrical device was receiving a charge of electricity. When I play music back again on iTunes, the same noise comes up again with the music and goes away immediately while the music continues all right.
This is what I have done so far:
Change my energy saving parameter to several different configurations (perhaps the hard drive stopping when unused was the cause) but none fix it.
Turned off Airport...did not fix it
I timed the pop noise and it happens exactly 30 seconds after I stop my music on iTunes and then again 30 seconds after music has been stopped unless I start playing the music back again and the pop noise sounds again.
Any help would be appreciated as I use my MacBook to play music sequences for my band (I am the drummer) so the darn noises come through our PA system (and I also tried my small computer speakers and it does the same thing).
Thanks,I spent a good amount of time reading several discussions. Apple is aware of this issue but no solution as of yet. The popping noise is "normal" behavior and happens because of how the sound system is programmed in the computer.
The solution (sorry for the bad news) is to not use the audio out minijack at all. Instead, get an audio interface that connects to your USB port and then route the output signal from your audio interface to your speakers, headphones or PA system. The popping noise will not sound. I tested it several times.
If the only cable you have is a minijack male type then go to Radio Shack and get adapters. I had to get me an adapter that takes two RCA males and converts them to a female minijack type.
Good luck. -
"An error occurred while updating the default player for audio file types"
Getting ready for a deployment of version 9.2 of iTunes for 1400+ users.
Getting this error when a 'normal' user goes into Edit/Preferences of iTunes and makes no changes.
"An error occurred while updating the default player for audio file types. you do not have enough access privileges for this operation."
I've elevated privileges of the C:\program files\itunes directory for this user to Full Control however problem remains.
Tried to modify the folder to remove 'read-only', as found this suggestion on here, but read-only keeps applying itself.
User has full rights to the location of the media as specified under Advanced Tab. If I tick 'Set as default media player' and remove tick and then click OK I do not get the error. From what I've read it's affected older versions of iTunes also.
Doe anyone have any other suggestions?
Thanks in advance.I had a similar issue. Turned out that - somehow - one of the directories or files in my iTunes music folder had gotten set to read only. Fixing it was easy.
Go to Edit/Preferences.
Choose the Advanced tab
in the General subtab select the contents of the box labeled "iTunes Music folder location"
Click Start, choose Run
Paste the location
Press the button to move up one level
Right-click the music folder, choose Properties
If this is your problem, the read-only box will be a solid color or checked. Set it to empty and choose the default "apply to folder and all subfolders and files." This will set everything in there readable, which after I did so I stopped getting the error. -
CS4 - Can't edit - Jerky footage and audio out of sync
HW SPECS: DELL XPS 600
Dual Core 3.0
8 Gig
1 TB internal
8 TB external Raid 0 Approx 350 MBs
Nvidia 8800 GT latest drivers
Win7 - 64bit
CAPUTRE
Mini DV (Sony)
1. Capture through Black-Magic Design Infinity HDMI. Express Media - AVI Uncompressed.
Plays back fine through OS and Windows Media.
Load footage into Premiere CS4 and footage is jerky
2. Capture directly into Premiere CS4 using firewire.
Plays back fine through OS and Windows Media.
Load footage into Premiere CS4 and footage is jerky and Audio out of sync
3. Took capture from BMD and converted it using Cineform AspectHD
Plays back squished footage from 16x9 to std footage is jerky and Audio out of sync with moray (waves)
4. Took capture from BMD and converted it using Cineform ProspectHD (trial)
Plays back fine through OS and Windows Media.
Load footage into Premiere CS4 and footage is jerky and Audio out of sync with moray (waves)
I have read a number of forum treads and I'm at my wits end. I want to capture in HD edit it in real time and export to DVD, BlueRay and Flash. I have spent hours on support and updated every driver and configuration setting that I know. PLEASE will someone tell me what do I need to do to get this to work?
Is it the DELL? Do I go to a Mac? (Ironic that most adobe tutorials are on Macs) Do I need a different solution? I'm going crazy! Maybe it's me and I'm capturing and creating sequences all wrong. Please provide a workflow that is working for you. Let me know if you need more specifics. Thank you in advance!2. I did a search for HDVSplit and came up with this site. http://strony.aster.pl/paviko/hdvsplit.htm Is this correct? Is there a released version?
3. HW
· Premiere Pro
o Version number CS4
o Installation language English
o Updates applied 4.2.1
o Project/sequence settings
· Operating System
o Name Windows 7 64 bit
o Update/patch level Enterprise
o Installed language English
o Display resolution and color depth. 1920 X 1200 millions + colors
· CPU type and speed Intel Pentium D 3.0 Dual Core
· Amount of memory (RAM) 8 GB
· Video card
o Manufacturer NVida
o Model GeForce 8800 GT
o Driver version 8.17.11.9621 (1/11/2010)
o Number of monitors (displays) in use. 1
· Audio card
o Manufacturer Creative
o Model SB Xfi
o Driver version 6.0.1.1373 (6/3/2009)
· Each hard drive's capacity and space remaining
o Disk setup (partitions used, raid configuration, what is where for OS/projects/media/scratch/audio)
§ Internal uses NVidia nForce RAID Controller
· 4 disks (SATA 7200 250GB) Raid 0 Throughput 180 MPS
§ External uses Highpoint Rocket RAID SATA Controller
· 8 Disks (SATA 7200 1TB) Raid 5 Throughput 350MPS
CODEC - Used the Sherlock utility here's the output.
Codec Reporting Utility Output Text
Date and Time: 10-Mar-2010 20:50:13
System Information
Operating System = Unknown Professional (6.01.7600)
CPU Descriptor = Intel(R) Pentium(R) D CPU 3.00GHz
CPU Clock Speed = 2993 Mhz.
Total Memory = 4095 Mb.
DirectX Version = 10.0
WMI Version = 7600.16385
ACM Version = 5.00.0
Video Codecs
AVI Decompressor
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
AVI Draw
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Blackmagic Design Decoder (DMO)
FileVersion = 7, 4, 0, 0
CompanyName = Blackmagic Design
FileDescription = DeckLink DirectShow DMO DLL
InternalName = VideoDMO
LegalCopyright = Copyright © 2003-2009 Blackmagic Design. All rights reserved.
OriginalFileName = dmobmd.dll
ProductName = DeckLink
ProductVersion = 7.4
CineForm HD Codec V4.3.4
FileVersion = 4, 3, 4, 298
CompanyName = CineForm Inc.
FileDescription = CineForm VFW CODEC
InternalName = CFHD
LegalCopyright = Copyright © 2001-2008 CineForm Inc.
OriginalFileName = cfhd.dll
ProductName = Aspect HD
ProductVersion = 5, 4, 6, 131
CineForm HD Decoder-2
FileVersion = 4, 3, 4, 298
CompanyName = CineForm Inc.
FileDescription = CineForm DirectShow Decoder
InternalName = CFDecode2
LegalCopyright = Copyright © 2001-2008 CineForm Inc.
OriginalFileName = CFDecode2.ax
ProductName = Aspect HD
ProductVersion = 5, 4, 6, 131
CineForm HD Encoder
FileVersion = 4, 3, 4, 298
CompanyName = CineForm Inc.
FileDescription = CineForm DirectShow Encoder
InternalName = CFEncode
LegalCopyright = Copyright © 2001-2008 CineForm Inc.
OriginalFileName = CFEncode.ax
ProductName = Aspect HD
ProductVersion = 5, 4, 6, 131
CineForm HD Encoder-2
FileVersion = 4, 3, 4, 298
CompanyName = CineForm Inc.
FileDescription = CineForm HD Encoder2
InternalName = CFEncoder2.ax
LegalCopyright = Copyright © 2001-2008 CineForm Inc.
OriginalFileName = CFEncoder2.ax
ProductName =
ProductVersion = 5, 4, 6, 131
CineForm V210 Decoder
FileVersion = 1, 0, 1, 3
CompanyName = CineForm Inc
FileDescription = V210 Decoder
InternalName = V210Decoder
LegalCopyright = Copyright © 2004 CineForm Inc
OriginalFileName = V210Decoder.ax
ProductName = Prospect HD
ProductVersion = 1, 0, 0, 18
CineForm YUV16 Converter
FileVersion = 1, 0, 2, 4
CompanyName = CineForm Inc.
FileDescription = YUV16Converter
InternalName = YUV16Converter
LegalCopyright = Copyright © 2001-2006 CineForm Inc.
OriginalFileName = YUV16Converter.ax
ProductName = Aspect HD
ProductVersion = 5, 4, 6, 131
Cinepak Codec by Radius
FileVersion = 1.10.0.11
CompanyName = Radius Inc.
FileDescription = Cinepak® Codec
InternalName = iccvid
LegalCopyright = Copyright © 1992-1995 Radius Inc., All Rights Reserved
OriginalFileName = iccvid.drv.mui
ProductName = Cinepak for Windows 32
ProductVersion = 1.10.0.0
Decklink MJPEG Compressor
FileVersion = 7, 4, 0, 0
CompanyName = Blackmagic Design
FileDescription = DeckLink DirectShow DLL
InternalName = DeckLink DirectShow Filter DLL
LegalCopyright = Copyright © 2003-2009 Blackmagic Design. All rights reserved.
OriginalFileName = Decklink.dll
ProductName = DeckLink
ProductVersion = 7.4
Decklink MJPEG Decompressor
FileVersion = 7, 4, 0, 0
CompanyName = Blackmagic Design
FileDescription = DeckLink DirectShow DLL
InternalName = DeckLink DirectShow Filter DLL
LegalCopyright = Copyright © 2003-2009 Blackmagic Design. All rights reserved.
OriginalFileName = Decklink.dll
ProductName = DeckLink
ProductVersion = 7.4
Decklink Video Capture
FileVersion = 7, 4, 0, 0
CompanyName = Blackmagic Design
FileDescription = DeckLink DirectShow DLL
InternalName = DeckLink DirectShow Filter DLL
LegalCopyright = Copyright © 2003-2009 Blackmagic Design. All rights reserved.
OriginalFileName = Decklink.dll
ProductName = DeckLink
ProductVersion = 7.4
Decrypt/Tag
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = XDSCodec & Encypter/Decrypter Tagger Filters.
InternalName = EncDec.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = EncDec.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
DV Splitter
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Qdv.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Qdv.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
DV Video Decoder
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Qdv.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Qdv.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
DV Video Encoder
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Qdv.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Qdv.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Intel IYUV codec
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Intel Indeo(R) Video YUV Codec
InternalName = iyuv_32.dll
LegalCopyright = Copyright Intel Corporation 1992-1997
OriginalFileName = iyuv_32.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Intel IYUV codec
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Intel Indeo(R) Video YUV Codec
InternalName = iyuv_32.dll
LegalCopyright = Copyright Intel Corporation 1992-1997
OriginalFileName = iyuv_32.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Microsoft RLE
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft RLE Compressor
InternalName = msrle32.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msrle32.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Microsoft Video 1
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft Video 1 Compressor
InternalName = msvidc32.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msvidc32.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MJPEG Compressor
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
MJPEG Decompressor
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
MPEG Video Decoder
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Mpeg4 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 Video Decoder
InternalName = mpg4dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mpg4dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Mpeg4 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 Video Decoder
InternalName = mpg4dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mpg4dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Mpeg43 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 Video Decoder
InternalName = mpg4dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mpg4dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Mpeg43 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 Video Decoder
InternalName = mpg4dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mpg4dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Mpeg4s Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 S Video Decoder
InternalName = mp4sdmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mp4sdmod.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Mpeg4s Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media MPEG-4 S Video Decoder
InternalName = mp4sdmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mp4sdmod.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MSScreen 9 encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Screen Encoder
InternalName = wmvsencd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvsencd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MSScreen 9 encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Screen Encoder
InternalName = wmvsencd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvsencd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
PBDA DTFilter
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = PTFilter & Encypter/Decrypter Tagger Filters.
InternalName = CPFilters.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = CPFilters.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
VBI Surface Allocator
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = VBI Surface Allocator Filter
InternalName = VBISURF.AX
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = VBISURF.AX
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Video Port Manager
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
WMV Screen decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Screen Decoder
InternalName = wmvsdecd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvsdecd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMV Screen decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Screen Decoder
InternalName = wmvsdecd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvsdecd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video Decoder
InternalName = wmvdecod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvdecod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video Decoder
InternalName = wmvdecod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvdecod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo8 Encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video Encoder
InternalName = wmvxencd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvxencd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo8 Encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video Encoder
InternalName = wmvxencd.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvxencd.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo9 Encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video 9 Encoder
InternalName = wmvencod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvencod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WMVideo9 Encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Video 9 Encoder
InternalName = wmvencod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmvencod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Audio Codecs
"What U Hear" (Creative SB X-Fi
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = QCap.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = QCap.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
ACM Wrapper
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Auxiliary (Creative SB X-Fi)
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = QCap.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = QCap.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
CCITT A-Law
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft CCITT G.711 (A-Law and u-Law) CODEC for MSACM
InternalName = Microsoft CCITT G.711 (A-Law and u-Law) CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msg711.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
CCITT u-Law
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft CCITT G.711 (A-Law and u-Law) CODEC for MSACM
InternalName = Microsoft CCITT G.711 (A-Law and u-Law) CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msg711.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Decklink Audio Capture
FileVersion = 7, 4, 0, 0
CompanyName = Blackmagic Design
FileDescription = DeckLink DirectShow DLL
InternalName = DeckLink DirectShow Filter DLL
LegalCopyright = Copyright © 2003-2009 Blackmagic Design. All rights reserved.
OriginalFileName = Decklink.dll
ProductName = DeckLink
ProductVersion = 7.4
Decrypt/Tag
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = XDSCodec & Encypter/Decrypter Tagger Filters.
InternalName = EncDec.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = EncDec.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Digital-In (Creative SB X-Fi)
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = QCap.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = QCap.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
GSM 6.10
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft GSM 6.10 Audio CODEC for MSACM
InternalName = Microsoft GSM 6.10 Audio CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msgsm32.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
IMA ADPCM
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = IMA ADPCM CODEC for MSACM
InternalName = IMA ADPCM CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = imaadp32.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
Line-In (Creative SB X-Fi)
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = QCap.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = QCap.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Microphone (Creative SB X-Fi)
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = QCap.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = QCap.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
Microsoft ADPCM
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft ADPCM CODEC for MSACM
InternalName = Microsoft ADPCM CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = msadp32.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MP3 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft MP3 Decoder DMO
InternalName = mp3dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mp3dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MP3 Decoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Microsoft MP3 Decoder DMO
InternalName = mp3dmod.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = mp3dmod.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
MPEG Audio Decoder
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = DirectShow Runtime.
InternalName = Quartz.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = Quartz.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
MPEG Layer-3
FileVersion = 1, 9, 0, 0401
CompanyName = Fraunhofer Institut Integrierte Schaltungen IIS
FileDescription = MPEG Layer-3 Audio Codec for MSACM
InternalName = l3codec.acm
LegalCopyright = Copyright © 1996-1999 Fraunhofer Institut Integrierte Schaltungen IIS
OriginalFileName = l3codec.acm.mui
ProductName = MPEG Layer-3 Audio Codec for MSACM
ProductVersion = 1, 0, 0, 0
PBDA DTFilter
FileVersion = 6.6.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = PTFilter & Encypter/Decrypter Tagger Filters.
InternalName = CPFilters.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = CPFilters.dll.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.6.7600.16385
PCM
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = IMA ADPCM CODEC for MSACM
InternalName = IMA ADPCM CODEC for MSACM
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = imaadp32.acm.mui
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WM Speech Encoder DMO
FileVersion = 6.1.7600.16385 (win7_rtm.090713-1255)
CompanyName = Microsoft Corporation
FileDescription = Windows Media Audio Voice Encoder
InternalName = wmspdmoe.dll
LegalCopyright = © Microsoft Corporation. All rights reserved.
OriginalFileName = wmspdmoe.dll
ProductName = Microsoft® Windows® Operating System
ProductVersion = 6.1.7600.16385
WM Speech Encoder DMO
FileVersion -
Hello,
My iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working through that port. I tested the speaker system through my iPhone, and it works fine. I hooked it up to the Headphone out/Optical digital audio in port, and it works through that port also. I did a computer restart, I also checked all wiring and did a system repair on the computer. I also restarted the computer in mode where I could use the system utility, and the computer still did not correct the matter, and it reported everything as being "ok". I wented into "sound", through system preferences, and the computer does not recognize anything I plug into the Audio in/Optical digital audio out port. When I plug the speaker sysytem into the headphone out/optical digital audio out port, it does recognize the Bose speaker system as being "headphones".
Reading through a lot of forums, I hear everything from compatibility, to the port being stuck, and on and on. Since the port was working before, and just quit working one day, I wonder if there is a capacitor or fuse or some type of similar thing is blown, and causing the port to be unfunctionable. Maybe the port went bad, but before this time, I had never used it, and the computer does not move around, and I never plug in and pull wiring out unless needing to, and that being rare.
Here is a link to Costco, where I bought the system, and the exact system I have, if this is any help: http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku= A4092931&ST=pla&dgc=ST&cid=262075&lid=4742361&acd=1230980794501410
By the way, I am running OS X Mountain Lion (10.8.5). I upgraded to Mavericks about a month ago, and expeirienced a number of issues, and had to take my iMac into Apple. Talking with the tech, I decided to wait for a while more before I upgraded to Mavericks. I try and keep the computer maintained.
If any of you have any ideas regadrding wear and tear, and fix I can do, etc., besides having to take my computer into Apple? Thank you, and potentially all of you, for your time and effort in helping me with this issue. Thank you kindly.
davEOkay, davE, first, you have posted in the "Mac Pro" forum (not Macbook Pro), so we can't be super helpful
but we help you. First, hold down the Option key while clicking on the speaker icon at the top of your screen. This should show you all the inputs and outputs you have. you could check in "About this Mac" then "More info" to see whatever's recognized. Then, maybe, fire up Audio MIDI. your speaker system should show up there. something might have gotten set incorrectly. You can test it there. I guess you are using the good ol' analog cable for connection, and it works on your iPhone, so the cable isn't bad. You could try this. it 's an adapter which might solve your problem
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
depending on which model of Bose speaker you have, you might try doing a product reset
turn off speakers...unplug power cord from outlet...wait 1 minute..plug cord into outlet..turn on speakers..
\\turning off automatic standby||
press and hold top of control pod for 6 seconds until you hear 2 tones that go from high to low
other than that ,I don't know
John B -
Audio out of sync with elemental plugin, and slower than my i7!!!
Maaannn!!
I just got a PNY nvidia quadro 1800 with elemental accellerator plugin. I just transcoded 2 hours of HDV straight from premiere 4 with Adobe Media Encoder using the Elemental codec and the audio is out of sync. It plays out of sync on the Blu Ray disk, and in Encore4. The audio is perfectly synced in Premiere. I just did another project a week ago without the Elemental, using the default Main Concept encoder and the audio is perfect. I am pretty sure I have the latest version of the Elemental Accellerator because there is a button to check for updates and it says there are no updates available. Does anybody know what is wrong here?.
The transitions are getting messed up. I can see a small section with the audio synced, then the video repeats after a second throwing them out of sync. I also suspect that the Elemental accelerator does not process any faster than the default h.264 for Blu Ray encoder. I hope I did not waste my money on this nvidia quadro 1800..
Whoooaa! I just woke up and checked the transcoding time.. To transcode approximately 2 hours of HDV it took 6:35 (hr:mm) with the elemental accellerator and it took 5:09 with my i7 920 chip!! Was that nvidia card a waste of money, or what?!!! Between the slower speed and the audio out of sync, I'd say I made a BIG misteak.. Does anybody want to buy a PNY nvidia quadro 1800? it'll be on ebay very soon..
Win7 64bit, Master Collection 4, i7 2.66 Ghz, Kingston Triple Channel DDR3 1600Mhz 6Gb, ASUS P6T, PNY nvidia quadro 1800.....Thanks Neil,
I don't think my audio interface has anything to do with it.. I am using Adobe Media Encoder for the export and the Audio interface's latency has nothing to do with it.. I see the source of the problem but not the solution.. The Elemental plugin is not working properly with the transitions in Premiere. The transitions are visibly botched and the sound is in sync for a partial second of each clip, then the video skips backward as the sound keeps playing. This happens on every clip after the transition.
Whatever you were talking about might have to do with some kind of real time export, but to where? I think Premiere might have some auto plugin delay compensation for audio tracks.. I dont think you even read my post.. My MOTU 896 Mk3 audio interface has a 128 sample buffer leaving a few milliseconds of latency, and I can set it as low as 64.. This still has nothing to do with my problem.. Thanks for your input..
I am curious to know what you thought I was capturing elemental streams and audio from my interface in real time to.. I was unaware of anything that works like that in this type of editing..
The bottom line is that my i7 chip gets the job done much faster than the quadro 1800, and that's a shame that I spent the money on the 1800.. On top of that it doesn't even work properly!! -
Audio out of sync after importing .MOV
Experiencing audio out-of-sync issues after importing a .mov clip into Premiere Pro.
The .mov clip causing the problem does not have a problem when played with quicktime or vlc: The audio matches the video perfectly.
Adobe Premiere Pro CC 7.2.1 (4) on OSX 10.9.1
Open Premiere, New Project ... > OK > Import the single video clip (whether by dragging into the app, or using the Media Browser). Start playing the clip in the Source monitor, scrub forward. Result: audio and video are way out of sync.
The .mov clip causing the problem was exported from Silverback app. http://silverbackapp.com/
Details about the .mov clip, via Media Inspector app:
============================================================
General
Complete name : /Users/jukeboxhero/20140203.mov
Format : MPEG-4
Format profile : QuickTime
Codec ID : qt
File size : 638 MiB
Duration : 34mn 46s
Overall bit rate : 2 566 Kbps
Encoded date : UTC 2014-02-04 06:52:45
Tagged date : UTC 2014-02-06 15:55:40
Writing library : Apple QuickTime
Video
ID : 2
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : No
Format settings, ReFrames : 2 frames
Format settings, GOP : M=2, N=30
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 34mn 46s
Bit rate mode : Variable
Bit rate : 2 449 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 18.969 fps
Minimum frame rate : 6.522 fps
Maximum frame rate : 19.355 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.062
Stream size : 609 MiB (95%)
Language : English
Encoded date : UTC 2014-02-04 06:52:46
Tagged date : UTC 2014-02-04 15:27:35
Color primaries : BT.709-5, BT.1361, IEC 61966-2-4, SMPTE RP177
Transfer characteristics : BT.709-5, BT.1361
Matrix coefficients : BT.709-5, BT.1361, IEC 61966-2-4 709, SMPTE RP177
Audio
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 34mn 45s
Bit rate mode : Constant
Bit rate : 104 Kbps
Nominal bit rate : 128 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 25.9 MiB (4%)
Language : English
Encoded date : UTC 2014-02-04 06:52:45
Tagged date : UTC 2014-02-04 15:27:35
============================================================
The video imports perfectly into Final Cut Pro 10.1.1
I have Premiere Pro trial and Final Cut Pro trial. If there's no fix or easy work-around, I will have to ditch Premiere.>Frame rate mode : Variable
No version of Premiere does "well" with Variable Frame Rate
Below is about iphone, but may help
Some people find that Iphone won't edit easily because it uses a variable frame rate
- A possible fix in message #22 http://forums.adobe.com/thread/934466 -
Audio Out of Sync - Why and How to Correct
I nested two 90 minute clips from 2 separate cameras which were both shot in AVCHD. I am using Premiere CS 5.5 . As a former FCP editor, whenever audio went out of sync, a message in FCP came up immediately and told you the audio was out of sync and it was an easy fix. How come Premiere is minus such an important feature?
I shoot stage productions where there may be music but no dialogue so chercking sync becomes rather difficult. After finishing a 2 hour video, I found the audio was out of sync in the nested sequences. Is there any way to auto resync the audio automatically?
Seems to me that Premiere Pro is a sub Pro App if simple audio sync is so hard to maintain in nested sequences. Makes nesting a sequence a waste of time if you have to redo the edit as a reslut of audio out of sync.Hello Everyone,
Has anyone found a solution to this BUG?
This happens to me all the time with Adobe Premier CS6.
It is an obvious Software BUG that needs to be corrected. I am a TV show editor.
I have had this happen to me 4 different times. You don't have to do anything special. The video with sound runs perfectly with any other product on your computer..but goes out of sync in Premier. I have tried cleaning up the Media Cache .cfa and .pek waveforms. No joy. I have tried relinking the media. No joy. I have tried moving the project and renaming and relinking. No joy. Rendering No joy. Setting the media cache to local area. No joy.
If this had happened to me just once, I would say, I have done something wrong. It has happened now in 4 different projects on four different shows. I have produced and released over 100 shows to TV.
I have checked everything, I have reloaded footage off camera. I have checked and bought new cables. I have checked codecs, frame rates, loaded into other products. All fine. I just wish Adobe engineers would do this same type of debugging of their software.
I use to work for Hewlett Packard Software division. We were taught to alfa test, beta test and not release until bug rates
were at certain levels. Some bugs just have get through or you never get to release. But this bug really hits your productivity in a major way. You have to resync BY HAND each cut... all your sound after hours and days and weeks of getting it perfect. Then in a split second. FFFFDDDDDDDDD
I have been editing with Premier for 6 years.... It only seems to be since I have upgraded to CS6. And I have to re-link by hand to correct the problem. I sync on electronic clapper board number and sound - almost impossibe not to sync. I will be working away happily, cut out some footage go to my next grab..BANG out of sync. That simple.
All I know is that it happens and for ADOBE to really be a true professional editing suite in the the TV/Movie world.... This is just not on. By any chance have they released a patch or bug fix to repair this. I have spent over 3 weeks edting a television show again .......needing to go to air in less than three weeks and all of a sudden between one cut and delete.. the sound is out of sync across the whole interview. JUST NOT ON. I have spent 4 hours now..none productive hours trying to resync the sound, find solutions on the website via forums. Some ideas have been really good and I have tried them. None have worked. Still unsynced. Almost completed show I now have to re-sync by hand. At this point, I am thinking FCP is looking good. I cannot stand this loss of productivity and time.
This is not the only forum complaining about this..that should tell you something.
Maybe you are looking for
-
How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?
-
iPhone 6 plus: Unable to search for anything in SAFARI. I start typing in a website to visit and the letter I type just hangs there. Then SAFARI crashes.
-
My iCloud account does not lock my device says that my account can not be used to unlock the device
what would be the solution to this problem because my data is correct but I get the message that can not be used to unlock
-
Invitaciones cruzadas a reuniones con el calendario de iCloud
Hola a todos, Hace un tiempo estoy usando el calendario de iCloud, pero recientemente empecé a usarlo para organizar reuniones e invitar a compañeros de trabajo a participar. Lo raro es que cuando los invito, les llega un mail para aceptar o declinar
-
HT204053 How to activate Face time?
Please help with activation of Face Time aplication. I am trying to do it over week already and it si not going through. I do receive massage waiting for activation. What is wrong with it?