Audio output from iPhone iTunes to TV Aux input

I'm trying to play music that's on my iPhone's iTunes through a component cable connected to my TV's AUX input, that in turn is connected to my receiver. It's physically easier to connect the cables on the front of the TV rather than to connect it to the back of the receiver. I've tried connecting the component cables directly to the base of the iPhone, and also through the iPhone's cradle, and then plugging just the right and left audio into the TV AUX input, but nothing happens. Any suggestions on what's wrong? Thanks.

well, you have to have your TV on the correct 'input' mode so it is using the audio coming in through the jacks on the front of the tv. you will then have to have your tv hooked up to your receiver. your tv will have to be on in order for this to work.
since you will only be connecting the cable one time, wouldn't it be simple to connect the cable to your receiver? that way, your tv doesn't have to be on in order for this to work.
just my thoughts...

Similar Messages

Selecting audio output from iPhone - bluetooth or dock?

Hi
I have a problem selecting audio output on my iPhone 3GS with my incar system
Set up:
Dension ipod dock connected direct to CD changer port on Radio
Bury Bluetooth hands free device.(CC9060)
My preferred option is to have the Dension play my audio.
However when I turn on the iPod function on the iPhone, the audio defaults to the Bury hands free system and tried to stream the audio via bluetooth which the phone cannot do.
On the bottom right of the screen on the iPhone, I see a speaker icon - I click on this and I get the option to select the iPod Dock or the CC 9060 (Which is the Bury Hands free)
I can select the iPod dock and teh audio plays fine, however, how to I force the iPhone to always use the iPod dock and not the Bury hands free.
From what I can tell, its not the Bury which is forcing teh choice - its the iPhone, but I cannot see anywhere where there is an option to choice the iPod dock as the default audio device.
Any one have any ideas?
Thanks
Glenn

Found a quite probable fix.
I've took my dock station under big lens and noticed a stuck contact -- they are supposed to be somewhat movable. So I pick a real small screwdriver and unstuck the contact.
Issue is apparently gone.
Message was edited by: Alex HQuest

I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks

I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device

mickyja wrote:
I don't own an Apple device, but I have purchased an audio album from the iTunes store. How can I play this on my android phone, as I am unable to burn the album to mp3 format? Can I obtain a refund if this is not possible? Thanks
p.s. I am not knowledgeable of Apple/iTunes etc, I was under the impression that if I purchased an album then I can use my purchase on a non-Apple device
Micky,
The iTunes Store sells songs in AAC format. Most Android phones can play AACs. Just sync them to your phone per the instructions with the phone.
If by any chance your phone does require MP3 format, you can use iTunes to convert the files, per this guide:
iTunes: How to convert a song to a different file format - Apple Support
(This conversion does not require burning.)
For future reference, note that the iTunes Store is really optimized for people using Apple devices. You might find it more convenient to buy music in Mp3 format from Amazon Digital Music or Google Play Music.

Airplay audio streaming from Iphone to ATV crashes when changing randomly title?

Why does airplay audio streaming from Iphone 4S iOS 7.04 crashes when changing randomly title? The ATV is not connected to a TV, only to an AV Receiver. Anywhere the same problem?
Thx a lot
Nolame

Oops - I messed up the title-
This is with iOS 7.0.2 and Apple TV 6.0.

Simultaneous audio output from Ipad and bluetooth ?

Is it possible to have simultaneous audio output from IPAD and a bluetooth speaker? At present I can only get audio from the Bluetooth Speaker and nothing from the IPAD's audio out! My purpose is that my Mom will hold the IPAD to listen to her Audiobooks but my Dad who sits across the room and is hard of hearing needs a speaker close to him, so I need simultaneous audio from both devices.
JW

Use this: http://smile.amazon.com/KOKKIA-A10m-MULTI-STREAM-Transmitter-concurrently/dp/B00 69G1SIC/ref=smi_www_rco2_go_smi_1968491462?_encoding=UTF8&*Version*=1&*entries*= 0&pf_rd_p=1968491462&pf_rd_s=smile-campaign&pf_rd_t=201&pf_rd_i=B0069G1SIC&pf_rd _m=ATVPDKIKX0DER&pf_rd_r=1N57Q0YT9QW7Y1K596YD and use two Bluetooth speakers for them. The speaker output on the iPad is pretty limited and your mother will probably have a hard time hearing it. Get a BT speaker for both and the above device and they both can listen from whatever location they want (within 40 feet) and get better sound.

Selecting audio output device in iTunes.

I currently have two sound cards installed.
My computer is defaulting to playing sound through one of them, but I would like to play iTunes through the other.
Is there a way to select the audio output device that iTunes outputs to?
I have no been able to find the option anywhere.
Thanks!

Hi
What program are you refering to ?? Or do you mean you have deleted the driver for your Audio/output device ??
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Downloaded album from iPhone iTunes and only got half of the album

Downloaded album from iPhone iTunes and only got half of the album. Where is the rest of the album? My iTunes account showed that I was charged for the full account>

Welcome to the forums!
I'd contact the iTunes store and explain your situation. While they normally do not allow duplicate downloads the iPhone and Store interface is brand new and bound to have some issues to start with. I'd suspect they'll just allow you to download it again or credit your account.

How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

AAC is Advanced Audio Coding. Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD). More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder). Therefore your LG phone won't play them.
You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button. Change the AAC Encoder to MP3 Encoder. After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version." You'll get a copy of the song that should transfer to your SD card and have MP3 encoding. Hopefully your phone will play that.

Multi channel audio outputs from a laptop such as 5.1 or 7.1

is it possible to get multi channel audio outputs from a laptop such as 5.1 or 7.1 for watching Movies or television while using Windows media Center.

Ok so i order to help anyone who is interested.
The only ironic solution to this problem i found was to use a plugin called xto7 to convert the xml to the old fcp7 format.
i then imported this into premiere pro.
this was then able to export an OMF that when imported into logic 10 that was using the correct 6ch mono setting as separate tracks.
Insane but it works until Apple fixes the incorrect meta data import in FCPX that sets the xml export to the default import that is always surround.
this is the only way i was able to send stems with all the edit points and fades for the sound editor.
If you don't have premiere lying around you maybe able to do it with fcp7 too we just didn't have it in this studio.
Fingers crossed Apple fixes the fcpx xml export.

No audio output from the orange mini j

Hi all,
I am having problem with my Audigy 4.
Hope you know what I mean, there are three 3.5mm mini jacks
of three different colors: green, black, and orange.
I have noticed that there are audio outputs from the green and black mini jacks only, while the orange mini jack seems to be not working at all.
When I plugged an earphone line to the orange mini jack,
I could hardly hear any sound from it.
Any idea?Message Edited by kwfine on 07--2007:03 AM

The orange jack is the center/subwoofer audio jack. If you're using a 5. speaker system. Make sure you have selected 5. speaker setting in the speaker setup software.
Jason

Analogue Stereo Audio Output from the New Mac Pro

Does anyone know what the analogue stereo audio output from the new Mac Pro is? From the specification, there appears to be a stereo output for headphones, but it is unclear what other audio outputs are available and whether a stand-alone amplifier is required to drive small stereo speakers. Yan (UK)

It is line-level. You will need powered speakers or an amplifier.

Transfer MP4 audio recordings from iPhone to MacBook Pro

Hi there! I want to transfer some MP4 audio recordings from iPhone to MacBook Pro. The only option I'm being given is via e-mail or message but the audio recordings are too long to send in these formats so I would like to bluetooth from iPhone to MacBook Pro.
Does anyone know how?
Thanks!

You're welcome.
Just noticed you're on a Mac...look at this:
http://www.ecamm.com/mac/phoneview/
Either or...PhoneView only works on OS X.

How can I toggle my iTunes audio output from my TV speakers to my Mac speakers

I've just recently set up my Apple TV.
This morning, I tried playing a song on my Mac with the intent of hearing it from my Mac speakers. However, the output came out of my TV speakers. How can I choose where the audio output is coming from?

From your Old Computer... Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
An Added Bonus is that you will then have a Backup of iTunes...
Backup iTunes to an External Drive
http://support.apple.com/kb/HT1751
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html

Help!! No AUDIO output from iMac through FW to mixing board (zed r16)

With my system stated below, I run an Allen-Heath ZED R16 board via FW. PROBLEM: I get NO Audio output to the R16 when I play iTunes or DVD/CDs in the iMac.
I DO get audio feed when I playback projects from Logic.
I have checked all System Prefs on the iMac (cahnged to the ZED); on Logic (changed to the ZED). I tried all different channels, routing, etc. NOTHING.
Can someone help?

Well, the Allen-Heath support site had the answer... quite surprised and pleased!!
Have to reconfigure the iMac speakers in the Audio/Midi preferences. The details are found in this URL:
http://allen-heath.helpserve.com/index.php?m=knowledgebase&a=viewarticle&kbarticleid=238
The ZED R16 is a great board but certainly not Plug' n Play.

Can MainStage split the audio outputs from a plug-in to separate busses/out

Take EXS24 or Battery 3 or Kontakt as examples
Only one plug-in instantiated but each drum 'hit' sent to separate outputs from within the plug-in/VI and brought into the mix on Audio/Aux channels for separate processing.
It's easy to set up in ProTools and Logic.
(I don't want to send the output of the channel strip to a bus - I know how to do that)
I've read the manual so many times and can't find any answers.
Does MainStage actually allow this routing ?
Thanks for any help
Lee

As far as I know, the only way to do what you want in MainStage is to set up an EXS24 for each output.
The EXS24 does have an option to load with multiple outputs, but I haven't found a way to make it work on my set up.

Audio output from iPhone iTunes to TV Aux input

Similar Messages

Maybe you are looking for