Audio output "How and Where"

Can any one advise me what port at the back of my Mini gives me the optical out so i can connect it to the back of my Pioneer LX82 Amp for sound.I read the info and have found that the following statement is correct.
"Audio features in the MacMini 2009 include a built-in speaker, combined optical digital audio output/headphone out". So what type of cable do i need (description) so i can achieve my goal.
Many thanks in advance for advice.

Take a look here:
http://support.apple.com/kb/HT3478
Regards.

Similar Messages

  • I want to use my grey Mac G4 desktop to Skype. How and where do I connect a microphone

    I want to use my grey Mac G4 desktop to Skype. How and where do I connect a microphone. Is it possible?

    G4 Macs have no built video/webcams or microphones.
    The best solutions are USB devices.
    First, you need to determine the version of Skype that you can use. The newest Skype version 5 can only run on Macs with a min. OS X version of OS 10.5.8 Leopard.
    Tthe older version of Skype that can run in your Mac is Skype 2.8 found here.
    http://www.skype.com/intl/en/get-skype/on-your-computer/macosx/2-8/
    There are not a lot of webcams or microphones that work with both Macs and Skype.
    Here is the only webcam, from Logitech, that I was using on my previous G4 that was both PC and Mac compatible, but the requirements say you need 1.0 Ghz CPU and OS X 10.5.8 Leopard.
    http://www.logitech.com/en-us/webcam-communications/webcams/hd-webcam-c615
    Logitech also has a few Mac compatible USB headset audio/microphones, but don't mention Skype compatibilty.
    You would need to buy and try to test.
    Plantronics makes only one or two models that will work with Macs and general Internet Telephony and include Skype, also.
    Here is one here.
    http://www.plantronics.com/us/product/audio-345?skuId=sku4920019&mftr=&prodfind= trutrue
    Good Luck!

  • How and where I can build the logic to calculate between cal days?

    Hi
    I have the cube having data like below. When I run the report based on calendar day as input, I would like to get output data how many Line Items based on my selection (status, Trans status) from between calendar day to calendar day+150 days.
    0Calday     Sold-to-Party           Status                 Trans No     Trans Status      Line Items
    03.10.2008     2000028074     50     216270          28                       1
    05.11.2008     2000024917     40     216281          15                       1
    06.10.2008     2000006277     33     216292          28                       1
    15.12.2008     2000019927     33     216303          10                       1
    If I provided calendar day as input at query how and where I can build the logic u201Cbetween calendar days to calendar day+150 daysu201D?
    For example, If I run a report as caleder input  03.10.2008 with selections status = 40,33, Trans statu =15,10, with above data, I can get the output below.
    05.11.2008     2000024917     40     216281          15                       1
    15.12.2008     2000019927     33     216303          10                       1
    Please help me to build the above logic?
    Thanks,
    Mannev

    Hello,
    There are some informtion in SDN that can be useful regarding customer exit for variables in BEX, for example:
    need clarification on BEX variable usage in customer exit.
    you can also try to use the variable offset:
    variable offset in Bex
    Best Regards,
    Ricardo

  • I bought Ivory II. How and where to find Ivory II in Mainstage 2, I bought Ivory II. How and where to find Ivory II in Mainstage 2

    Dear friends
    Anyone can tell me how and where to load Ivory II in Mainstage 2? Thanks!

    You should, like Logic, be able to click on the Input for the channel strip.  Example:  on an existing channel strip in the mixer, click on the input button.  it is below the "I/O" header at the bottom of the channel strip but above the fader and meters.  CLick and hold, and Ivory should be there in the list along with the standard input generators and Audio Units.

  • Have downloading FF4. how and where do I began using FF

    would like to began using FF4 which I have already downloaded but don't know where to start

    I Bought a wireless camera and on the receiver it has a video and audio output (rca) and i also bought a Blekin USB Video Bus so i could connect any thing with a s-video out or rca out to a mac or a p.c.. it came with some software which is not compatible with may mac. i need a way to view and record the video from it. Also the USB Video Bus dose not support audio but it did come with a rca to the stander 3.5mm headphone jack cable. i plug that in to "iMic"
    Blekin USB Video Bus lowest price: http://www.valleysoft.net/item.php?pid=9&cid=123
    iMic: http://www.amazon.com/Griffin-Technology-iMic-External-Sound/dp/B00006BALQ
    Also if the is absolutely no app that can do what i want for free is it possible to create a "workflow" in Automator or can someone help me find someone to create an app??? PLZ HELP!!!
    iBook G4   Mac OS X (10.4.8)  

  • How and where can I combine several pdf files?

    I have written a Guide Book for Music Teachers in Word, converted it into a pdf file and would now like to insert sheet music files written with Sibelius Notation Program which have also been converted into pdf files, since they are otherwise not compatible with Word. How and where can these diverse pdf files be combined?

    First, make sure you open Acrobat, and not Adobe Reader.  It's a common mistake.
    From Acrobat, use File | Create | Combine Files into a Single PDF:
    On the next panel you can select the files you want to combine, rearrange them, etc., and finally click Combine.
    P.S. your menu may look slightly different, as we may not be using the same Acrobat version.

  • How and where can I submit a bug report to Nokia ?

    How and where can I submit a bug report to Nokia ? I haven't found any Nokia's webpage where it is explained.

    wait for the next nokia beta test program (they usually annouce it on this forum) and enrol
    then you will have access to the developers to report bugs
    the last beta test finished end of November.. so it will be a while b4 the next beta test
    cheers
    Nokia N95 8GB, 6234, 6101, N-Gage Classic, 8250, 3350, 3315

  • How and where can I order a new set of installation discs?

    I forgotten the administrator's password for my iMac and also lost the original installation discs, just wondering how and where to order a new set.
    There's no Apple store in my city, or near by.

    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support visit online support site.

  • How and where can i do a "User GRANT to SYSADM,SYSCTRL,.." ?

    Hello all,
    the first time we installed a new SAP-System with sapinst on DB2/LUW V9.
    SAP works. (As yet we "drove" DB2 only on z/os)
    SAP Created four db2 User : DB2<SID>, <SID>ADM, SAP<SID> and SAP<SID>DB!
    They all have no "Grant" privilege?
    How and where can i do a User grant to SYSADM,SYSCTRL,.. ,
    there's no admin?
    Thanks a lot!
    Markus

    Hi Markus,
    in addition to explicit GRANTs DB2 LUW has the concept of privileges.
    db2<dbsid> is instance owner and part of the SYSADM group db<dbsid>adm.
    <sapsid>adm is part of the SYSCTRL group db<dbsid>ctl.
    sap<sapsid> is part of the SYSMAINT group db<dbsid>mnt.
    In addtion to that <sapsid>adm is DBADM. This right is explicitly granted during the installation with SAPInst.
    The relationship between OS group and privilege is controlled by the database manager configuration parameters SYSADM, SYSCTRL and SYSMAINT.
    The rights of these privileges are described in the DB2 documentation.
    Regards, Jens

  • How and where can I write a subject matter in a reply I am doing,

    How and where can I write a subject matter in a reply I am doing, I dont want the original subject matter and all I can see is the person to whom I am sending it and cc on the right?

    What are you actually asking about use of webmail ?
    *[[Problems with email and how to find help]]

  • I just updated my iPhone 4s iOS to iOS 8 and but can no longer find personal hotspot, How and where can I find it on my iPhone 4s

    I just updated my iPhone 4s iOS to iOS 8 and but can no longer find personal hotspot, How and where can I find it on my iPhone 4s.
    Usually I share my internet with other device with ios7 but now that I have ios8 on my iPhone 4s I can no longer find the personal hotspot. How can I share internet with other device using ios8 on my iPhone 4s?
    THanks

    Settings>Cellular>Personal Hotspot. The carrier has to support this for you. This is where you should find the setting to turn it on or off.

  • I want to create a "Play All" chapter marker that will play the video from start to finish in addition to the standard chapters I have-I guess I can auto start the DVD but would prefer a button-how and where would I put this "play all" marker??

    I want to create a "Play All" chapter marker that will play the video from start to finish in addition to the standard chapters I have…I guess I can auto start the DVD but would prefer a button…how and where would I put this "play all" marker?? Thanks..

    The start chapter button is a play the whole movie button regardless of how many other markers you have.
    Once a DVD starts playing it continues to the end.
    Chapters marker simply gives the viewer a place to start playback whether it be the start, middle or near the end.
    Al

  • How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes. And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

    How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
    And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

    Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a  program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

  • In iphone4, How and where to save a file attached in mail

    hey, i have started using iPhone. presently using iPhone4. How and where can i save files attached in mail.

    Photos attached to an email can be saved to the Camera Roll in the Photos app on your phone. Tap and hold on a photo in the email until you get a choice to Save Image.
    Other documents require a suitable app.
    PDFs can be saved in the free iBooks app available in the App Store.
    Word docs can be saved in Pages or other apps that support text files.
    Etc.
    To save a document tap on the doc. You will either be able to view the contents or get a choice to open in some other app,

  • I have Amazon instant video app, and recently downloaded a movie. How and where can I find it?

    I have Amazon instant video app, and recently downloaded a movie. How and where can I find it?

    Your downloaded movie should be in the library tab of the Amazon instant video app.

Maybe you are looking for

  • Error syncing with Itunes

    I brought it home connected the port, updated all software and get a message from itunes stating, "iTunes could not connect to the iphone "iPhone" because an unknown error occurred (0xE8000025) any suggestions?

  • Find the installation path of the addon

    Hi Can anyone tell me a way to find out the installation path of the current addon please. I would like to reference the xml files that are in there in my application I am using SP01 PL36 Many thanks Regards Andy

  • Garageband '09 Track is Out of Sync

    We recently recorded a 30 minute talk for a podcast in Garageband and for some reason when I go to edit it, the track begins before the visual for it does. Now the audio is out of sync from the visual waveform and when I try to edit the track, everyt

  • (Movie included) - Upgrade to Creative MediaSource5 to version 5.10.38 HANGS (freezes) all the t

    The file to upgrade Creative MediaSource5 to version 5.0.38 HANGS (freezes) all the time. I?ve done this like 7 times already? same thing. (my current Version is 5.0.25, a bit old) Please take a look at this movie, it'ss short and small. http://web6.

  • Capital Y not working with SHIFT

    Shift y does not work on my OSX 10.7. I can do a Caps Lock Y, but not shift. Anyone else have the same problem? It seems to be my only letter having this problem.