Audio output in Mono after upgrading to Cap 4

Hi everyone,
I really hope someone can help me. I just upgraded from 3 to 4 and suddenly all new audio that I record plays in mono rather than in stereo as with my older audio files. The strange thing is that audio recorded in Ver 3 plays correctly and new audio files play in mono when exported as well. I'm using the same mike on the same laptop in the same office; the only change is the version upgrade. It's got to be a setting issue somewhere but I can't find where any audio output settings are found, except the normal one that allows me to change bitrate capture.
PLEASE help!!!!
Kristaa

Hello there,
This would appear to be another instance where the Windows registry has become corrupt or has incorrect permissions. In this first instance I would suggest that you take a look at the following blog post.
Adobe Captivate 4 Installation Issues on Microsoft Windows XP 
If that doesn't solve the problem then please report this issue to the Adobe Captivate team. I am sure a member of the CP team can help you fix this problem.
Adobe Captivate Feature Request/Bug Report Form 
Regards - Mark

Similar Messages

  • Core audio output drops out after upgrading boot HD

    All,
    I have a strange thing happening after I cloned and replaced my OS boot drive. I cloned my OS boot drive to another larger drive. When I boot to this new drive and open projects (located on another dedicated HD), playing certain instrument elements cause all of the audio to drop out. It makes a pop, then another pop where the audio would tail out. So if I had a piano EXS instrument doing this behavior and I play a note, I get a pop, then where the audio would finish accessing the file, I would get another pop. This affects the entire output of all audio in the project. I don't think this affects iTunes, but I will check again tonight.
    In some cases, I have narrowed this down to a custom IR file loaded in Space designer. When I bypass this plug with a custom IR loaded, all audio will work fine, until I un-bypass this plug. If I reload this IR file, everything works fine.
    This now is happening on some of the Logic drumkits and EXS instruments and reloading the questionable instrument does not fix this issue. It seems like a possible database/pathing issue, but not sure.
    Has anyone seen behavior like this? Any way to fix?
    Some things I have tried on this new OS clone:
    Repair permissions
    Remove the logic plist file and reboot
    Run all of the maintenance/clean up scripts in Onyx
    BTW: This occurred with 8.0.1 and also 8.0.2
    If I physically re-install my original OS boot drive, these projects work fine.
    I am using Core Audio and am using the embedded audio interface. I also have a PCIx UAD card installed.

    This thread got lost with the 8.0.2 discussions.
    Has anyone run into this kind of behavior or any possible steps to recover?
    Thanks!
    Tad

  • Several audio problems on ziio after upgrade 2.2.1

    Hello everyone, sorry for my broken English - my problem: after upgrading from froyo to eclar on ZiiO 7-inch 8 gb does not work anymore speakers only headphones work-thanks to those who can help me-Albert

    Hi kamrang,
    As far as I know, the ZiiO 7 supports Skype audio only. It does not support Skype video.
    You may wish to consider a dedicated webcam that allows you to do both voice and video calls. You can view the range of webcams here. You can also take a look at the Live! Cam Sync HD as well.
    Regards,
    Colin-CL

  • Speaker Audio Quality Went Down after Upgrading Device Software

    Hello Everyone
    I recently upgraded mine Blackberry 8830 from Os Version 4.2 to 4.5. I had to do it as i was not able
    to utilize the complete features of this smartphone
    One big thing i noticed though is , after upgradation the audio quality went down by almost 20%
    Initially when mine phone used to play songs , it would be amazing to listen to that being quite
    different from all other Mobile Phones. But after the upgrade , the audio quality declined.
    I tried all options , using audioboost and everything else, but not able to listen to same quality till now
    Can someone please help , may be i am missing out something here?
    Thanks
    Amit

    Hey axsuri,
    Once you completed the upgrade did you restore a backup file? If you did then try doing this, backup the device again. Once you have a new backup preform a reset to factory as shown in this article http://bbry.lv/a0QXmX after this is completed transfer a music file to the device and test to see if you are still having the same issue. If the issue is resolved then use this article to only restore essential data. http://bit.ly/bSbfl3
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Audio output not working after installing 10.8.2

    i have updated my os x lion from 10.8.1 to 10.8.2 but when i have done that my audio output is stop working completely....!! pllease help me to resolve this problem i have macbook late 2008 edesion aluminum..!!

    System Preference > Sound > Output > Internal Speakers
    Make sure Mute is not enabled.
    Reset PRAM.  http://support.apple.com/kb/PH4405
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
    Best.

  • 2015 HP Envy 23 Ips monitor with Beats Audio is not working after upgrading to Windows 10

    Hi I have upgraded OS to Windows 10 recently. from then there is no sound from my monitor. FYI.. am ussing a Dell laptop to connect to the monitor witha HDMI cable. It was working fine before upgrade and suddenly it stoped working after the OS upgrade.

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your notebook computer's monitor will not produce any sound after upgrading to Windows 10, and I would be happy to assist you in this matter! According to the available list of supported drivers for your monitor, there is currently no Windows 10 software published at the moment.  In the meantime, I recommend following the steps in this document on HP Products - Where do I find Windows 10 drivers and software for my model? I also suggest connecting the monitor on a different computer to test the hardware functionality of the speakers. I hope this helps! Best Regards

  • Audio no longer working after upgrade

    Hi,
    After doing an upgrade this morning, my audio no longer works.
    Booting into KDEmod gave the first clue when I got an error message saying audio not found.
    The output of alsamixer say "alsamixer: function snd_ctl_open failed for default: No such device", yet my modules have not changed in rc.conf.
    Could this be related to HAL also being updated?
    Thanks,
    JTD

    Do you by accident have more than one sound-device? I didn't lose sound but "aplay -l" showed that ALSA has changed the order of the cards. Hence I suddenly didn't get sound from where I expected it.

  • No optical output with alsa after upgrade

    After doing a system upgrade, my digital audio has stopped working. I can still get sound from my headphones, and my reciever does notice when i turn the IEC958 switch on and off in GNOME volume controll.
    $ lsmod|grep '^snd' | column -t
    snd_usb_audio 87191 0
    snd_usbmidi_lib 18516 1 snd_usb_audio
    snd_rawmidi 19525 1 snd_usbmidi_lib
    snd_seq_dummy 1479 0
    snd_seq_oss 29240 0
    snd_seq_midi_event 5516 1 snd_seq_oss
    snd_seq 50562 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 5281 4 snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss 39509 0
    snd_mixer_oss 17730 1 snd_pcm_oss
    snd_hda_codec_realtek 295589 1
    snd_hda_intel 21837 6
    snd_hda_codec 74609 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 6222 2 snd_usb_audio,snd_hda_codec
    snd_pcm 72321 5 snd_usb_audio,snd_pcm_oss,snd_hda_intel,snd_hda_codec
    snd_timer 19537 3 snd_seq,snd_pcm
    snd 58906 24 snd_usb_audio,snd_usbmidi_lib,snd_rawmidi,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc 7361 2 snd_hda_intel,snd_pcm
    ls -l /dev/snd
    total 0
    drwxr-xr-x 2 root root 60 Mar 2 23:55 by-id
    drwxr-xr-x 2 root root 80 Mar 2 23:55 by-path
    crw-rw----+ 1 root audio 116, 9 Mar 2 23:55 controlC0
    crw-rw----+ 1 root audio 116, 12 Mar 2 23:55 controlC1
    crw-rw----+ 1 root audio 116, 8 Mar 2 23:55 hwC0D2
    crw-rw----+ 1 root audio 116, 7 Mar 2 23:55 pcmC0D0c
    crw-rw----+ 1 root audio 116, 6 Mar 3 00:10 pcmC0D0p
    crw-rw----+ 1 root audio 116, 3 Mar 2 23:55 pcmC0D2c
    crw-rw----+ 1 root audio 116, 5 Mar 2 23:55 pcmC0D3c
    crw-rw----+ 1 root audio 116, 4 Mar 2 23:55 pcmC0D3p
    crw-rw----+ 1 root audio 116, 11 Mar 2 23:55 pcmC1D0c
    crw-rw----+ 1 root audio 116, 10 Mar 2 23:55 seq
    crw-rw----+ 1 root audio 116, 2 Mar 2 23:54 timer
    I have tried going through the wiki but have had no luck. Thank you very much for any support
    Last edited by gryphon (2011-03-03 05:20:39)

    What card/chip? do you have a custom /etc/asound.conf or ~/.asoundrc?

  • Audio quality gone south after upgrade

    i got my bb 8520 in October 2009, the audio quality on phone calls was absolutely perfect and far better than previous normal cell phones (this is my first smartphone).  A few months ago (i am writing this in October 2010) i plugged my bb into my pc and was told there was a operating system upgrade available - i can't remember the version it upgraded to, but the upgrade from a software ease of use and visual perspective has been well worth it - BUT since then the audio/sound quality of phone calls is absolutely horrendous and sometimes i cannot hear the person on the other side - it now sounds like the speaker in the phone cannot handle the volume (that sort of problem), but the volume is on the lowest level, bass and treble are on normal etc - i have spent hours on the phone trying different options, but the problem persists.
    please help me!

    Hello jed-sa and welcome to the BlackBerry Support Community Forums.
    I would suggest doing a clean software reload. KB11320 will show you how to do this reload.
    Be sure you back up your BlackBerry before starting as all user data will be deleted.
    After the reload completes, test without restoring any data.
    It is suggested to do a selective restore of data so the issue doesn't reoccur. KB10339 will show you how to do the advanced restore using Desktop Software 5.0.1. KB23680 will show you using 6.0 Desktop Manager.
    Let me know how you make out.
    Thanks! And have a great day
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • TS4113 Mac mini looses audio output through HDMI after being in 'sleep mode'

    Since a month or so, my Mac mini is unable to send audio through HDMI output after being in 'sleep mode'.
    Recently this was no problem, but now I cannot hear anything after unsleeping (unless I reboot fully).
    Please help.

    This is not just a Mac Mini problem.  I've found comments from people with all kinds of Mac, with any kind of external sound device, who all have this same issue.
    The common factor is Mountain Lion.
    Apparently there is a new build (12F42) which is supposed to fix this.
    http://www.gadgetguide4u.com/new-os-x-1085-build-number-12f42.html
    Apple released it to their employees on the 25th Sept.
    Here's hoping that build is available for the rest of us soon ...

  • Doly Audio driver cannot start after upgrading to Windows 8.1

    Upgrade to Windows 8.1 went flawlessly, but when I restart I get this message:
    I can't find any reference to Dolby Theater or Audio in any app or Device management.
    I can't find any drivers for Windows 8 64 bit  on the Lenovo site either.
    Can anyone help with this?
    Solved!
    Go to Solution.

    There is a possible solution in the following thread;
    http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/m-p/126...
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Dolby Audio driver cannot start after upgrading to Windows 8.1

    Hello.
    Windows 8 was the worst thing that happened to Windows, but since I bought this G505s laptop with Win8 pre-installed, i had no other choice to go to. Few days after the purchase, Windows 8.1 arrived and I updated 8 to 8.1 hoping to see some improvements. But to my sadness, 8.1 has ruined my expectations, and Lenovo didn't even care to address the user issues in 8.1
    Here are my Issues : 
    OneKey Recovery : Updated to 8.xx.xx.xxxx
    The OneKey Recovery app tells that 'Current system cannot create a backup'
    I can't have a secure laptop without it creating the Recovery !!
    Lenovo, please address this issue and fix the OneKey Recovery Problem !!
    Dolby audio app : Doesn't open, and if once it starts, cannot configure the Equalizer !
    --- Dr Saketh ---

    hi sotim01,
    Thanks for posting!
    1. Uninstall all components,
            Open Device Manager and Uninstall your Conexant audio under Sound and ganing controllers (make sure to place a check under delete driver software for this device)
    2. Open Control Panel Uninstall a program and highlight the dolby component and an Uninstall button will appear.
    3. Open your C: drive and Delete any folder that says drivers if non then continue with the next step
    4. Download this Driver for installation
            Conexant Audio Driver  
    Install it and continue
    5. Open Drive C: now and you should have the Drivers folder back.
          Open that, Open Connexant Open Dolby Gui,  then you should have Dolbyaa for Advanced audio.
    Restart your PC and there you go!
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • G480 - Dolby Audio driver cannot start after upgrading to Windows 8.1

    I upgraded today to 8.1 and now when I start my computer I get a message box telling me <re-install Dolby advanced audio driver>. I found the Dolby program in my control panel, programs and features, and there is no un-installer or, seemingly a way to re-install the driver. I want fix this problem / don't want this box popping up at every boot, what do I do? Thank You.
    Tim

    hi sotim01,
    Thanks for posting!
    1. Uninstall all components,
            Open Device Manager and Uninstall your Conexant audio under Sound and ganing controllers (make sure to place a check under delete driver software for this device)
    2. Open Control Panel Uninstall a program and highlight the dolby component and an Uninstall button will appear.
    3. Open your C: drive and Delete any folder that says drivers if non then continue with the next step
    4. Download this Driver for installation
            Conexant Audio Driver  
    Install it and continue
    5. Open Drive C: now and you should have the Drivers folder back.
          Open that, Open Connexant Open Dolby Gui,  then you should have Dolbyaa for Advanced audio.
    Restart your PC and there you go!
    Let me know your findings
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Csv output stop working after upgrade

    We just did a apex 3.2 to 4.0 upgrade, then all csv output links stop working. How can I fix the problem?
    Any suggestions are greatly appreciated.
    A sample link is shown in following, which give page not found error
    http://c2apex:7777/pls/apex/f?p=104:7:2297989702429998:FLOW_EXCEL_OUTPUT_R4326133634540053_en-us

    Yes! I'd install the software pack of the mouse for Mac OS X that adds a control panel at Sistem Preferences and I take control - and the wheel came back!
    But it's not easy finding it in Microsoft.com (in my case: .br). You got to start by hardware products and follow support links, system, etc..
    Thank you for the tip!

  • HP Pavilion a6300f no audio output device is installed

    HP Pavilion a6300f Desktop PC 
    no sound (headphones or speakers)
    HP Pavilion a6300f Desktop PC  windows 7 32 bit
    no audio output device is installed
    upgrade from vista to windows 7 32 bit & not original hard drive 
    i have tried various methods suggested, none worked
    i have tried updating the drive, this did not work either
    if anyone can help it would be greatly appreciated
    This question was solved.
    View Solution.

    Straitstrider67, welcome to the forum.
    What is the make/model of the speakers that you are installing?  This will help me understand how they should be connected.  There are several ports for connecting the speakers on the Back I/O.  Once I have the information that I requested, I will see what I can do to help you get them up and running.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for