Audio output low using stereo mix under recording HP Pavilion Dv6 Win Prof Prod# A3E82AV

HP Pavilion Dv6 Win Prof Prod# A3E82AV  with High Def Audio Codec
When I bought this I asked if it had "What you hear" under recording and was told it had "Stereo Mix" instead and it would do the same. I accepted that as my Gateway has this as well and it works great. However, using the same settings as for the Gateway and using either Audacity (Latest Version) or DAK7 Wav Editor it's like I can't get the recording signal high enough. Sound barely register on the wave chart with the recording level as high as I can get it both in the programs as well as under the Stereo Mix Property. Playing back what I record require the volume to be at max and the quality is very bad. Am I missing something?

I have had the same problem ever since I bought my laptop with "beats audio". In my former PC this worked perfectly with Realtek HD Audio. Someone please help!

Similar Messages

  • "Stereo mix" or record what you hear... Soundblaster u

    With my onboard audio there is no "stereo mix" or record what you hear option in the recording control ...So when I am listening to an audio feed I can not record it with Adobe audition (as I can with another computer)
    If I disable onboard audio and add a sound blaster 24 USB card will I have that function?Message Edited by k2koq on 0-22-200707:49 PM

    I will answer my own question:
    Just got the Blaster Li've 24 USB..
    Installation...easy
    sound ...excellent
    Does it record what it hears..YES!
    thank you soundblaster.

  • I have a hp hpe-595a, i'm trying to use stereo mix with a hot mic. anyone know how to do this?

    I'm trying to sing along with the music in the chat program Paltalk and also host a music room on the same program, I can only use the mic or stereo mix but not both at the same time.
    I have been using this chat program for over 5yrs and have always been able to use Stereo mix with the mic active, using the realteck codecs or soundblaster (what you hear)
    I can't do this with the IDT codecs supplied.

    Hey Redritr,
    Thanks for the question. iTunes purchases are billed to Store Credits first, before Credit Cards, as outlined by the following article:
    When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance.
    via iTunes Store: How iTunes Store purchases are billed
    http://support.apple.com/kb/HT5582
    It also may be that the iTunes Store is prompting to verify your billing information:
    When there is a mismatch between the iTunes Store's records and your credit card company's records, you will receive an error message stating that your credit card's security code isn't valid or that your zip code does not match your bank's records.
    In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
    via iTunes Store: My credit card's security code or zip code does not match my bank's records
    http://support.apple.com/kb/TS1646
    Additional Information:
    Why can’t I select None when I edit my payment information?
    http://support.apple.com/kb/TS5366
    Thanks,
    Matt M.

  • No sound using stereo mixer with speaker balance s...

    No sound using stereo mixer with speaker balance set between approx 95-100% of max to the right
    Setup: good quality functional soundcard, fine when audio not routed via Skype, mixer enabled, Skype mic / audio auto disabled, issue present when tested using a variety of different systems, latest version of Skype was used on all machines being tested
    Issue: When the speaker balance is set approx 95% to 100% to the right speaker channel using the Windows audio control no sound is generated. The issue is absent when audio is not routed via Skype. This would seem to be a Skype bug and would like to report the issue as a bug. Has anyone else encoutered this issue? Is there a resolution?

    Yes, I restarted my computer yesterday and this morning all my sounds is controlled by the left/right blance percentage. 

  • How to set correct audio output while using external screen for presentation purposes over a wire

    while trying to make a presentation or simply playing a video from my MacBookAir over thunderbolt/HDMI table to large screen I am experiencing problems with audio only being played from the MBA and not the soundsystem built in to that screen (unless using a VLS application and manually selecting the audio output target).
    Please help in finding how to steer audio output device  using 2in1 cable such as thunderbolt?

    Hi jar9,
    If you are not hearing audio over your HDMI/Thunderbolt connection, you may want to see if it is showing up as a selectable audio output as outlined in the following article:
    OS X Mavericks: If you can’t hear sound from your speakers
    http://support.apple.com/kb/PH13841
    Regards,
    - Brenden

  • Noise on audio output when using the power adapter

    I'm a musician and use my mid-2007 MBP 15" in my live rig. When I use the power adapter, I hear a buzz, sometimes accompanied by a slightly louder buzz that cycles on & off about 1x/second. There are a few weird things going on here:
    1. The buzz does not happen all the time. That leads me to think it may be noise in the AC line that the adapter is plugged into.
    2. The noise is heard when I use both the built-in audio output AND an external USB audio interface.
    In any case, when I disconnect the power adapter and run my MBP on battery, the noise goes away completely. I can probably do this on most gigs, but I'm a little nervous since I run a FW drive, an external USB audio interface, and my midi keyboard (powered by USB) so I am putting a little heavier than usual load on the MBP's battery.
    As I said, this may be a noisy AC line. Another guess is that it's the PMU inducing noise into the audio circuitry. I'm hoping a simple AC line filter can help me but I thought I would ask here first in case anyone else has dealt with this. TIA for any help!

    I had a similar problem and fixed it with a $5 universal travel adapter. Yours might be different but here's my situation. Try it for little cost and see if it works.
    I'm also a muso with an iMac running external KRK speakers via USB Mbox2. Previously I had a Macbook Pro and the same audio problem. I've been putting up with a very low volume, high pitch noise until now. I simply plugged the Mac power cord into a universal travel adapter which then goes into the wall. For Aussie users there is an adapter on ebay that will allow a 3 pin Aussie plug to go into female side and has a two pin Aussie male on the other. For US users you can probably get the same although there is a 59c product that will do the trick called a ground lift adapter. Applecare actually agreed this was the best fix and confirmed there would be no problems with power supply or Mac performance. What a gem ! God knows I've looked into all kinds of alternatives that could have cost hundreds instead of $5.

  • Audio output problem - using M-Audio Fasttrack

    I had been using Logic Express (7.2.3) without any issues until recently plugging in a mic through my M-Audio Fasttrack.
    I don't remember the exact chain of events - but at some stage, the software instrument outputs were no longer audible played either through the M-Audio, with earphones attached to its output, or through the laptop.
    Even after disconnecting the Fasttrack, resetting the audio driver to 'built-in-input' and rebooting Logic Express, I still can't get any audio output from the software instruments. They aren't muted and the volume is turned up. Audio output from other programmes is working fine.
    Can anyone give me any tips on how I could resolve this/suggest what I might have done to screw the audio up and what I need to do to undo it?
    Thanks,
    Antony

    this is actually really simple
    i just had the same problem with my m-audio and called support
    when you plug in the m-audio fast track mac automatically sets the input and output through the fast track. To fix this you need to create an aggregate device. heres how:
    click the finder in your dock
    then click applications
    in applications a utilities folder should appear...click that
    in applications click Audio MIDI Setup
    at the very top of the computer screen where it usually says what program is open it will say Audio MIDI Setup ..next to that click Audio
    then click open aggregate device editor
    you need to click the + to add a device
    in the aggregate device screen it should say aggregate device.
    below that check the option built in output
    then check the option fast track (or device your using) the one that says 2 under the IN category and 0 under the OUT category.
    click done
    now open logic express (reopen if already open)
    then click preferences
    audio
    under device tab the device option needs to say aggregate device.
    click apply changes
    and your done!
    hope it works!

  • Audio output issue using Airplay Mirroring over Apple TV

    I'm using the newest version of Apple TV to mirror my display from my MAC using the newest macbook pro with mountain lion 10.8.
    The problem i'm having is whenever i try to change audio output in airplay mirroring mode the mirroring shuts off. I can't change outputs!! It's like it's forcing the macbook to use the apple tv hdmi port for audio. I NEED to use my USB DAC which i have connected to my MPB.
    Grateful for any ideas, i did not expect the software to act as crappy as this. Using different audio sources successfully is something i took for granted.     

    Well, since I can't imagine this being a feature of Airplay I assume we're either hitting the limitations of the technology, or it's a bug. Knowing Apple I suspect it's a limitation of Airplay, perhaps because audio and video are sent out as an integrated stream?
    I agree, this does suck, since all I have to use as audio is the tiny 1 watt speaker on my Epson projector! I can't even use audio out from the Apple TV, since all it has is that useless optical port. Very frustrating indeed.

  • Audio Output while using Airplay

    I have a rather unique requirement that has me stumped. We have an Apple TV driving a projector that does not have audio output so when we mirror the display from the iMac using airplay we want the audio output device to be "Internal Speakers" but that can not be selected in System preferences. Does anyone know a work around for this configuration or will I have to get seperate amplifier and attach it to the optic audio output from the Apple TV?
    Thanks
    Brian

    Well, since I can't imagine this being a feature of Airplay I assume we're either hitting the limitations of the technology, or it's a bug. Knowing Apple I suspect it's a limitation of Airplay, perhaps because audio and video are sent out as an integrated stream?
    I agree, this does suck, since all I have to use as audio is the tiny 1 watt speaker on my Epson projector! I can't even use audio out from the Apple TV, since all it has is that useless optical port. Very frustrating indeed.

  • Satellite L20 - no audio output device using Win7

    I purchased a 2nd hand Satellite L20 which was upgraded from xp to win7 on the task bar says no audio output device is installed.
    Tried update driver in device manager -- no good
    Downloaded Realtek AC97 driver -- no good.
    It will play sound from dvd through usb sound device to head phones.
    But how the hell do i get the sound to work on internal speaker.

    Do you know which sound chip is inside?
    This old notebook model is not supported for Win7.
    Try to install THIS driver.
    If this will not help try to install Vista driver or drivers designed for other notebook models.
    It is not easy to help with this. Check sound chip.
    By the way: I asked you for model name and not model number!!!

  • Satellite L875 - No Stereo Mix for recording or streaming sound

    I've seen other posts about this problem, but would like to know if there is a solution for an L875 laptop running Windows 7 64-bit version.

    Hmm maybe you should update the sound driver too
    As I said in my first posting, I could enable the stereo mix on my Satellite. But there is one difference to the P300-16N; my notebook supports Realtek sound chip, your notebook supports Conexant CX20561 sound chip
    Maybe this is the reasons why the stereo mix is not available.

  • No audio output device is installed on my laptop (HP PAVILION SLEEKBOOK 15 PC WINDOWS 8)

    I BOUGHT MY LAPTOP LAST 4 MONTHS. AUDIO IS WORKING PROPERLY.. BUT WHAT HAPPEN IS MY LAPTOP UPDATE THEN WHEN I OPEN NEXT DAYS IT SAYS NO AUDIO OUTPUT INSTALLED ON MY LAPTOP.. MY LAPTOP IS HP PAVILION SLEEKBOOK 15 PC WINDOWS 8.

    Hi,
    Try using Recovery Manager to reinstall your original Audio Driver ( probably IDT ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
    Recovery Manager - Windows 8.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How to set mw600 as stereo bluetooth headset in HP pavilion dv6 and control media player?

    i have mw600 and it works great when paired with my satio. i was able to pair it with my HP pavilion dv6 64-bit windows 7 home premium but the audio quality is mono and not stereo. i tried installing lenovo and broadcom bluetooth drivers like i read in the website but still didn't fix the problem. i also cannot control the media player and itunes through my mw600. can anyone help me with this please?

    HPdc7900 Win7 x64 with lenovo BT driver package (from Web) works for me on MV600
    although it did not said stereo (like before in WinXP) there are two distinct L/R channels
    Try some movies with strong L/R channel signatures .. hope it works for you

  • Switching audio outputs when using optical cables

    I have an optical cable out to my main home stereo for listening to music. Sometimes I only want to use the iMac's internal speakers instead of the home stereo. Unfortunately, the System preferences does not seem to allow me to change output sources via the software. The only way that I can find to switch outputs is to physically unplug the optical cable. Given the reported frailty of optical cables, I would rather not have to do this. Is there a way to allow a software change from external to internal speakers without unplugging the cable?
    Thanks for any help that you can offer!

    Does not seem to be any software control of multiple outputs. Just have to unplug the output for the internal speakers to come back to life.

  • Export "Stereo Mixed" vs. output to Dolby 2.0 in Compressor?

    When I export a sequence's audio to AIF, I can specify whether I want to output the audio "channel grouped" or "stereo mixed". If I choose "stereo mixed", the channels are output according to the relative volume levels that I specify in the sequence's "Audio Outputs" preference pane.
    If I output to Compressor and specify Dolby 2.0 output for the same sequence, is the Dolby 2.0 signal output adjusted according to the relative volume levels I've specified in the "Audio Outputs" preference pane, or is it just a straight outputting of everything?
    Thanks.

    Hi William,
    how did you incorporate your AC3 file into your MPEG 2 file?
    I'm trying to add an AC3 surround sound file to a QT and encode both into a single MPEG 2 file (for playback on a digital video projection system) using compressor 3 - can this be done with just compressor and FCP (FCS 2)? Do I need extra software?
    Cheers

Maybe you are looking for