Audio output through Ultrastudio 4K

Hi friends,
Connected a black magic ultra studio 4k from iMac.
using Final Cut Pro X (version10.1.1)
System profrences for blackmagic desktop video 's attached below
Final Cut Pro X's prefrences is added below
From blackmagic ultra studio 4K through analog xlr audio is not playing back.
In the same system from da vince lite audio is playing back in the same set up.
I can play back the audio through the defaule audio connection of the system; But then latency is there.
Is there a solution?
Thanks in advance,
Sreekumar

I have the same exact problem, may some one help us

Similar Messages

  • Audio output through speakers but not headphone jack

    I have an HP Envy 15-J178ca. I am unable to play audio from my headphone jack, but audio plays on my speakers. When I plug in my headphones, the speakers stop outputting audio but no audio plays through the headphone output. I have tried multiple headphones which all work on different devices and was unsuccessful at outputting audio. I have updated my audio driver to the latest version using the HP drivers site. The following is a screenshot of the sound devices on my computer.

    I have the same exact problem, may some one help us

  • Audio output through mini display port

    2009 model macbook air 2,1. Is there an update or video card that will allow audio output using Moshi HDMI adapter?

    http://support.apple.com/kb/HT4241
    Only the most recent late 2010 MacBook Airs support audio over Mini Display Port.
    For an older machine, you'll need something like this: http://www.amazon.com/Mini-DisplayPort-HDMI-Adapter-Audio/dp/B0033SM2BQ/ref=sr_1 _14?ie=UTF8&qid=1306806721&sr=8-14 or this: http://www.amazon.com/Displayport-Toslink-Female-Converting-Adapter/dp/B003BS2PF G/ref=pd_sim_sbs_e_5

  • TS4113 Mac mini looses audio output through HDMI after being in 'sleep mode'

    Since a month or so, my Mac mini is unable to send audio through HDMI output after being in 'sleep mode'.
    Recently this was no problem, but now I cannot hear anything after unsleeping (unless I reboot fully).
    Please help.

    This is not just a Mac Mini problem.  I've found comments from people with all kinds of Mac, with any kind of external sound device, who all have this same issue.
    The common factor is Mountain Lion.
    Apparently there is a new build (12F42) which is supposed to fix this.
    http://www.gadgetguide4u.com/new-os-x-1085-build-number-12f42.html
    Apple released it to their employees on the 25th Sept.
    Here's hoping that build is available for the rest of us soon ...

  • (Too) Variable Audio Output through mini jack

    Tried looking through prior posts to see if anyone had remotely similar problems. Just lately my 5G iPod will radically change in volume level mid-song; so much so that it distorts and is in danger of blowing my speakers in my car. Don't have Sound Check on but doesn't seem to be an issue here as it's midsong. I mostly listen to it through speakers plugged in to the mini jack, or headphones and not the dock. Any ideas what this might be caused by?

    http://support.apple.com/kb/HT4241
    Only the most recent late 2010 MacBook Airs support audio over Mini Display Port.
    For an older machine, you'll need something like this: http://www.amazon.com/Mini-DisplayPort-HDMI-Adapter-Audio/dp/B0033SM2BQ/ref=sr_1 _14?ie=UTF8&qid=1306806721&sr=8-14 or this: http://www.amazon.com/Displayport-Toslink-Female-Converting-Adapter/dp/B003BS2PF G/ref=pd_sim_sbs_e_5

  • Final cut pro audio output through firewire

    Hi,
    At present I'm using my macbook pro for video playback in an in house broadcasting studio.  I'm sending my video and sound through firewire into a Canapus ADVC110 box and then I split the audio into my sound board, and my video into a video mixer.  Unfortunately, I'm only getting one track of sound from FCP.  Do you know how I could get both tracks going through the firewire?  I'm hoping it's a simple solution.
    Thanks

    The problem is that I'm not sending it through speakers.  I'm sending it into a mixer, that broadcasts to both televisions and simulcasts out of the headphones into a PA system.  I broadcast out of a school.  The problem is that the mixer only sees one side (audio track 1)   It doesn't see the other side.  However, if I hook a dvd player up to the same plugs on the mixer, it sees 2 sides. 
    Everything is cool for most presentations; however, when students do voice overs and they only go to one track, it may not be heard through the mixer. 
    Remember, my hookup is as follows:  macbook pro - firewire - canopus advc110 video converter - then the video goes into a anologue video mixer (panasonic AG-MX70) but the sound gets split and goes into a audio mixer.  The problem is that the sound out of the canopus box gives me only one side.  I've tried replacing every cord, firewire, plug, etc, and the result is the same. 
    To survive the next few days of presentations, how do I send out a mono audio signal from my macbook, instead of a stereo audio signal????

  • Why is my macbook playing the audio output through the microphone?

    I have an older Macbook Pro. When I call someone on Skype, Google Hangouts, etc., they are able to hear all the audio that my computer is playing through the headphones. E.g. if I watch a video while Skyping someone, they can hear all the audio from that video through their own headphones. This applies to any sounds my computer makes (including the volume change sound, other systems sounds, etc.).
    I originally thought it might be some sort of line interference from poor quality headphones, but tests with different headphones rule that out. Please, any thoughts on what might be causing this?

    What Mac do you use? What version of OS X is it running? What versions of iMovie and iDVD do you use?

  • Sending logic audio/output through optical output on g5?

    hello, im having trouble trying to rount the audio from a logic file to the optical output on my g5...i want to run the optical cable into my dat machine?
    just cant seem to make it happen?
    any suggestions?
    thanks!

    make sure you are sending audio out of the digital out on your computer by checking you sound settings in your system preferences.
    Make sure the sample rate matches for your DAT machine and the optical out on your mac. DATs tend to default to 48k, whereas most other consumer devices (such as your computer) run at 44.1k. All DATs are different though. Some change sample rate automatically when they detect an external clock source, while others allow you to manually set the sample rate.
    You can set your computer's digital I/O sample rate usign the Audio/MIDI setup found in your utilities folder.

  • Can I play audio output through both my iMac speakers and Apple TV simultaneously?

    I have Bose speakers conected to the headphone jack on my iMac.  When I select Airplay Mirroring on the iMac, the Bose speakers become disabled as audio is then streamed to Apple TV which resides in another room?  Is there any workaround which will give me audio to both the headphone jack and Apple TV simultaneously? Thanks.

    it's shown here
    http://www.maclife.com/files/imagecache/futureus_imagegallery_fullsize/gallery/a irplay_2.png
    the ones one check with the green V play audio

  • TS4225 I have just shifted to iOS 7 but i believe i lost the audio output through the earphone terminal. How do I make it work again?

    How do I make it work again? I tried with the apple earphones provided and the stereo jack in my car, both didn't seem to work. The thing is, if functioning normally, after I insert the earphone jack in the terminal, the sound from the speaker should disappear and be rerouted to the earphones, this didn't happen.
    Shall I reset my iphone?

    it's not ios7 it's not software it's a hardware issue
    it's this
    https://discussions.apple.com/thread/1343532
    just the opposite where rather then the switch being stuck in one way it's stuck in the other
    more hits
    https://www.google.dk/search#q=iphone+stuck+in+headphone+mode

  • Final Cut 7.0.2/Tascam USB-2, US-144MKII audio output intermittent

    Dear folks,
    Hello.
    I am continuing to have problems with getting sound out of my Tascam USB 2.0 inteface box using Final Cut v 7.0.2, on a Mac Pro 2x2.66 GHz Quad Core Intel Xeon, OS10.6.4 .
    The interface unit is a Tascam US-144MKII, USB 2.0 Audio/Midi Interface.
    I have down loaded its driver. It works fine as the system output and playing back from Quicktime player.
    In Final Cut it is fine one moment, sometimes pops and clicks then it goes silent. It is unpredictable and unstable. It is intermittent, not working most of the time. I have refreshed the AV Devices, set audio output in Audio/Video Preferences and tried Sequence settings, as well as restarting the computer.
    I am having to go Firewire out to an external deck to get sound out of Final Cut onto my sound system.
    Final Cut seems to be the problem.
    Any ideas?
    Thank you for your time.
    Bests,
    Peer

    I've had limited success across five suites. Running FCP 7.0.3 across all rooms, however I've only been able to get one room functioning in a limited way. It sees MIDI info in the Control Panel indicator and replays some fader level info, however only when stopping and starting FCP. Have been troubleshooting the issue and have downloaded the newest Tascam driver for the FW-1884 (from May 2010). Can get FCP audio output through the monitor bussing on the Tascam, however actual moving-fader still not achieved.
    Called Tascam's (LA) help line and they couldn't give me any advice at all (as they would only comment on Logic issues and were unfamiliar with using FCP!)
    Any suggestions from anyone?
    Thanks.
    Message was edited by: Christian Bass

  • Problem with multiple applications using one audio output

    Hey there, I'm having issues setting up my 5.1 headset seen here (http://www.sharkoon.com/?q=en/content/x-tatic-digital) to work with multiple applications.
    Right now I have audio streaming from a flash video, when I try run "$ speaker-test -c 6" I get the following error:
    speaker-test 1.0.25
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 6 channels
    Using 16 octaves of pink noise
    ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
    Playback open error: -16,Device or resource busy
    If I try open another application which uses this device, the first application has its sound cut off.
    2 more things to note:
    - My preference for setup would be audio output through S/PDIF and input through USB, with the USB output disabled (To not waste system resources).
    - I unmuted all channels in ALSA, however when I ran the test only 2 channels seemed to be working (Front L&R), it may have been defaulting to the USB connection, in which case, that explains only 2 channels being in use, is there a method of setting the S/PDIF as default system wide?
    Thanks in advance for any help given!

    brebs wrote:It's put the comments on multiple lines - fix that.
    Woops, I guess my paste messed up, new .asoundrc: http://pastie.org/3706033
    I can run both at the same time, however I cannot hear any audio. Do I somehow have to change the default device, if so how can I do that?
    Edit:
    Restarted system now I get:
    speaker-test 1.0.25
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 2 channels
    Using 16 octaves of pink noise
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 2048 to 8192
    Period size range from 1024 to 1024
    Using max buffer size 8192
    Periods = 4
    was set period_size = 1024
    was set buffer_size = 8192
    0 - Front Left
    Segmentation fault
    (That's with both commands)
    EDIT 2:
    Interesting, apparently 2 audio streams are working, however the console thing still doesn't work..?
    EDIT 3:
    Didn't last long, now flash crashes and html 5 doesn't work -.-
    EDIT 4:
    Flash only works when other audio is active, however it has constant popping sound. I went through the system logs to get the errors of when flash crashes, it's audio crashing it, here's the error:
    Apr  1 02:04:15 localhost kernel: [ 7057.499787] AudioThread[6227]: segfault at 7f2e2f7a8008 ip 00007f2e413a2786 sp 00007f2e33614ae8 error 7 in libasound.so.2.0.0[7f2e4131e000+eb000]
    Last edited by B3NW (2012-04-01 01:11:04)

  • No Audio Output CS6 after Matrox update

    Since I updated the driver for Matrox Mini / Max to 7.0.2  I now have no audio output for Adobe CS6 Premiere Pro. Levels are showing up on the audio meter, and the ASIO settings appear to be normal. Did Matrox switch up something. I thought I would ask here. (I exported file and audio is there...so this is just an output connection problem.)
    The audio is normally routed through Realtek Digital Output Optical, which is working (audio works with other software.) Adobe ASIO is set to this working output.
    I am thinking the Matrox install switched the setting...but thought I would ask here on the Adobe Forum first to see if there is a solution. Since it is a Saturday. Thanks.

    Glad to be of help!
    Yes, they have changed things with CS6. 
    Matrox's hand was forced by the changes made in Premiere.  There are all sorts of settings that are now in different places.
    This setting is obviously not covered by the Premiere help files, as it is not a Premiere setting.  It is not as clear as it should be in the Matrox User Guide, either.  Page 53 is as near as it gets, and that only tells you how to get the audio output through the MXO2.  You have to infer that for output via sound card, you choose the other setting.  Not good!

  • KT4V MB doesnot deliver 6-channel audio output -

    KT4V MB doesnot deliver 6-channel audio output through line-in ,mike-in and mic-in provided on the back panel of MB as explained in appendix of Quick User's Guide.can anybody help  
    Shyamal   ;(
     

    shyamal,
    Since your MSI Hardware is a Motherboard and you posted in the Multimedia Forum, I moved the thread to VIA Forum for you.
    Good Luck,
    Richard

  • Using a radio app to Airplay music through my Apple TV. Works, but after some minutes, the Airplay audio output setting switches back to iPad. Why? Solution?

    I want to use a FM radio app to Airplay music through my Apple TV (by using the synchronizing function). Works, but after some minutes, the Airplay audio output setting switches back to iPad. Why? Solution?
    Why don't use iTunes? Because this just needs to many handling in order to get it where i want it (in general, this whole idea of doing everything online just works likes... ). An app is easier (that's why it is invented).

    Hey AKfishgirl,
    Thanks for the question. The common variable here is your Wi-Fi router. Let’s check to see if the commonly used ports are being blocked by a firewall on your router:
    Apple TV: TCP and UDP ports and protocols used
    http://support.apple.com/kb/HT2463
    Well known TCP and UDP ports used by Apple software products
    http://support.apple.com/kb/HT6175
    Thanks,
    Matt M.

Maybe you are looking for