Audio Output to HDTV

I have connected my MBP to a Sharp Aquos HDTV. For the audio I am using a cable from Radio Shack with an 1/8" plug (at the MBP) and 2 RCA plugs connected to the TV. There is a hissing/scratching noise coming from the TV speakers. This noise is not present from the MBP speakers at other times. Does anyone know how to fix this?
Mac Book Pro Mac OS X (10.4)

Switch the audio output to the maximum output volume, or go out and get a mini toslink optical cable. It will cost more, but it is a digital output, and it has a mini optical 1/8 inch output to plug into the MBP, and then a regular optical connector on the other end. It is digital so it will sound better and then will have surround sound.

Similar Messages

Audio Output from Mac Mini 2010

Hello -
I purchased a mac mini 2010 this weekend for use as a home theater PC. I've got it connected to an Onkyo tx-sr604 a/v receiver via HDMI. I then pass the HDMI signal from the Onkyo to my hdtv, so I think it just passes through. For audio, I use a surround sound system. And, in case it matters, I have a second tv connected via the DVI output on the mini.
The Onkyo indicates that the audio input signal on the HDMI is PCM Multichannel. When I play movies (e.g., Netfix or DVD) or music (e.g., pandora) on the mini, I don't get any sound on the center channel in multi-channel mode. In direct mode, I only get sound in the front left and right speakers. I'd like to have normal surround sound.
Is there not a way to get 5.1 surround sound from the mini? Or, am I missing a set up or something? If I connect my receiver to the mini with the digital audio output, will I then receive digital audio?
Thanks.

Welcome to the Apple Discussions!
Mike it is my understanding that if you want 5.1 Surround sound that you must connect the mini directly to the SS system and not pass the audio signal through another device.
Dah•veed

MacBook Unibody (late 2008): audio + video to HDTV

Have a MacBook Unibody (late 2008), and after reading forums, purchased a miniDP -> HDMI cable as well as a miniToslink to Toslink cable (3.5mm jack to Digital Audio Output). Video works fine, but unfortunately, even with the red LEDs shining bright, no sound comes through to my 2009 Samsung HDTV.
In preference -> sound -> output, digital out / digital optical-out port is selected, but it does also say "the selected device has no output controls." iTunes music does not play with the Toslink cable in but will resume after the cable is removed.
Is it a setting on my MacBook or Samsung TV that I need to adjust? Is it a specific HDMI port I need to use with the Digital Audio Output (Optical) line to audio in sound (no number appears)?
Really appreicate any insight you might have!

I was going to do the same thing then after reading my TV manual I realized that the Digital Audio on the TV was an OUT not an INPUT. In other words it is used to connect your TV to sound system for a better experience. Not a digital input from a connect device.
Check your manual and see what the function of that plug on your TV is for. If it is for both INPUT and OUTPUT then there must be an audio setting.
Cheers,
Andrew

Changing audio output

Is there an easier way to change my audio output device then opening system preferences and opening audio prefernces? Maybe a way to get a drop down menu on the menu bar next to the volume slider or something?

I would never say that this behavious ir illogical.
the illogical thing is that there is no option to change the behaviour, if for any reason there is a reason to do so.
One would argue that fixed and very badly located headphone jack is a problem, some would solve it by not taking headphones out at all, and using a menu option to switch to speakers EVEN if headphones are in, some others would say they need headphones for music while tping,
and that external speakers can be used immediately simultaneously with iMac projecting a HDTV movie on a monitor wife is watching.
separate audio outputs of course.
Is it so hard to envision as necessary?
I read a lot of posts about people having problems with damaged or unclean jacks for headphones. Having one always insterted would preventi it..

1/4" with optical audio output

Does anyone actually use the digital audio output? Like in a home theater for Dolby Digital? Does the MBP output DTS?

The digital audio output works great. As an audiophile, it's one of the best things about my MacBook Pro. I use mine to not only connect directly via optical cable (toslink) to an external DAC, I can use my MBP as a digital front end for my audio system. I also use my Airport Express to stream music digitally to my pre-amp. The great thing is there is no signal loss between my MBP (source) and the preamp or DAC. This is completely different from using the audio output jack in an analog manner. The difference is astounding. You can buy an optical cable, also called toslink, fibre optic cable, fibre cable, online or at most big box electronics stores. Not all cables come with the mini adapter though, so make sure to find one that does. Monster makes one for about $40, but you can find them online for as little as $6 (before shipping.) The absolute best deal I found was from PowerMax.com. Delivered, this cable was less than $20! The cabling is small in diameter, but it is high quality and the mini adapter snaps into solidly into place. It is a great product at a great price and will make an extraordinary difference compared to analog. Find it here: http://www.powermax.com/parts/show/serv-922-6540 It's made by MonsterCable (MonsterCable is labeled on the external shielding.) It does come with a mini adapter and will work with all the Apple optical digital inputs and outputs. The digital audio output will export Stereo, Dolby Digital (Stereo, 5.1 and 7.1) and DTS. It's a pure digital signal. I can connect my MBP to my 50" 1080p HDTV and use the optical digital out to output the audio in Dolby Digital 7.1 into my audio system. Awesome! Apple was genius to design the audio jacks (input and output) to accept both an analog and digital cable in the same jack. For less than $20, try it, you'll love it. Also, regarding Apple's Airport Express; I rarely used my Airport Express in an analog manner. I couldn't stand the loss in sound quality. I mean, what's the point of having your music in a lossy format stored on your computer if you can't get that same high quality out of it. Using the Airport Express in an analog manner, the degradation in sound quality isn't even worth it (for me.) As an audiophile, quality (both the recording process and the playback process) are everything. By connecting the Airport Express with an optical cable to my pre-amp or DAC, I use it almost daily to stream music and now can truly used my MBP as a digital front end and music server. It's one of the greatest upgrades ever in my audio system and it was only $20!

Optical/Digital Audio Output from MacBook

So I am interested in hooking up my MacBook to my HDTV so I can watch movies with it. I know for video I need to get a mini-DV to HDMI cable. That's easy. But what about audio? I would ideally like to have playback in surround sound. I have read that the headphone audio output also doubles as an optical output. Is this true? If so what cable can I buy and will it output surround sound from a DVD movie?

Yes, the audio port doubles as an optical in and output. You will need a optical cable from your macbook to your sound system to have surround sound/dolby digital, and when you play the dvd it should automatically convert the output to a digital signal. I have this setup on my iMac and Macbook. I have the logitech Z680 (now Z-5500), and when I play a DVD, the screen on the controller says 'digital'.
The cable you'll need is a optical audio cable 3.5mm (for the macbook) to a toslink (square shaped with two corners tapered). You can buy cables which are toslink to toslink that come with adaptors for 3.5mm jacks.
Message was edited by: Josh118

Optical digital audio output/headphone out

Does anyone know if there is a way to connect stereo speakers directly (not through a receiver/amp)to the Optical digital audio output/headphone out on a imac? The new 20 inch imacs have a 24watt internal amp which would be plenty for the speakers that I want it to drive. Thanks

is there an attachment that i have to buy? do i just rip the tip of the cord off?
Yep, there are two "standard" optical-digital-audio connectors -- the original "square" one is still used in most larger audio/video components. The newer/smaller one, used mainly in portable gear, is exactly the same size as a mini headphone plug. Radio Shack carries adapters/converters and cables of both types (usually at outrageously high prices). For online vendors, try:
http://monoprice.com (search for "TOSLINK")
Great prices and a good rep for quality/service among to the HDTV-fanatics on avsforum.com.
Looby

2 different "switchable" audio output (HDMI and analog) with Mac mini

Hello,
I have a 2010 Mac mini that I use as a media center. Its hooked up to my HDTV in the living room via HDMI. I also want to hook up external speakers via the 3.5mm analog jack. These speakers are in the kitchen.
I would like to get my audio through HDMI when I watch TV and be able to get audio output via 3.5mm jack when I just want to listen to music in my iTunes library. I like to control my iTunes library with the Remote app on multiple devices.
Is it possible to switch automaticaly the audio output?
Right now I use my Airport Express to stream music from my Mac mini to the speakers but I think that the Airport isn't really needed since it lies just by my Mac mini. I'm pretty sure the mini can do both.
I've tried to hook the speakers to my Mac mini but first: I hear a "hum" in the speakers (wich I don't hear with the Airport) and second: I can't seem to get the audio out in the speakers.
I've read many posts about the audio midi settings but I can't figure it out...
Any help?
Thanks a lot.

I hit post too early... here's the rest of it.
See the Linein app- https://www.rogueamoeba.com/freebies/
See the SoundFlower app- http://cycling74.com/soundflower-landing-page/
See AU Lab- http://www.apple.com/itunes/mastered-for-itunes/
With those apps (or combination thereof)
You can copy an audio stream from one output to another.

Cabbot select audio output

Hi,
I have a Mac Mini. He is conected to my TV. I also conected a headphone plug from the Miac Mini into my stereo installation.
When going to systempreferences - audio I could see in output the name of my TV -type: HDMI and below it says headphone.
When I choose TV I had sound on the TV or I could select Headphone I had sound through my stereo-installation.
After buying Adobe Photoshop Elements and Premiere it shows also "ADOBE" in the list. I didn't understand the use of this, or what to do with it.
Now, after upgrading to Lion I only see my TV and headphone. When I click on "TV" it will highlight for a second and automatically turns back to "Headphone"!!
So I can not choose anymore my audio output. Is this because of Lion?
Now I discovered that the only way I can use the oudio output to my TV is to ejected the Headphone-plug.
Is this the only solution or does anyone know how to recover in the old situation, so that I can make a choise in the preferences screen for audio??
(all the cables are in the back!!!)
kr,
pascal

Hi
I have same problem over here. Just upgraded to Lion (10.7.2) . Used to output to HDTV via AV receiver over hdmi port. Now is not working, not even showing in -control panel- sound settings, anymore !
Headphone port is not working at all ! At least streaming to ATV2 it's working uraaaa !
I'm using ITunes 10.5 and before upgrading to Lion everything was working flawless.
Miss the Leopard now .
Annoying glitch ...just need a patch, hopefully in a future update

Using my Pc audio into my HDTV quest

i wonna run my PC's surround sound speakers through my HDTV. can i do this with out turning my PC on and what cables would i need?
I have Creative inspire TD7700 7. speakers going through my Creative Audigy 2 ZS sound card and i wonna run it into my Panasonic TH-42PX60. With my Creative Inspire TD7700 speakers i had an decoder DDTS 00, i though i could run it through this straight into the HDTV? is this possable?

dj8work,
So long your TV isn't connecting to the soundcard to provide the audio output to the speaker, I don't think you need to turn on the computer. If your speaker is connected to the DDTS decoder then just have your TV audio output goes to the decoder audio input. I'm not sure what type of audio connector your plasma TV have so you need to find a suitable audio cable for the connection. As for the decoder, it has coaxial, optical and phono connector.
JasonMessage Edited by Jason-CL on 06-05-2006 04:44 PM

Asrock ION330/Nvidia HDMI - No audio output

Machine was running archlinux and not been upgraded in over 6mths but HDMI audio worked fine. Decided to do a scratch build since all the changes in that time and have a nice clean system.
If it helps, this is what I install. Ssed this exact same install process for another Asrock ION330 and Acer Revo3610 (both same hardware) but neither use HDMI at all. Both VGA with either optical or analog audio. Both work with no additional config.
pacman -Sy nfs-utils screen ntp alsa-utils mlocate xorg-server xorg-xinit xorg-server-utils mesa nvidia ttf-dejavu xfce4 gamin slim mythtv unrar lirc xbmc wget
Get no sound output but also zero errors on any of the following commands. I should add that the receiver does not detect any audio coming in, ie it usually identifies how many channels of audio and type it is receiving.
aplay /usr/share/sounds/alsa/Front_Center.wav
speaker-test -Dhdmi:NVidia -c 6
aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
Output of devices and modules:
[root@lounge ~]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
[root@lounge ~]# aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, VT1708S Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, VT1708S Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia,DEV=0
HDA NVidia, VT1708S Digital
IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=NVidia,DEV=0
HDA NVidia, HDMI 0
HDMI Audio Output
[root@lounge ~]# lsmod |grep "snd"
snd_hda_codec_hdmi 27561 1
snd_hda_codec_via 38667 1
snd_hda_intel 27668 0
snd_hda_codec 100743 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 6429 1 snd_hda_codec
snd_pcm 77827 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7427 2 snd_pcm,snd_hda_intel
snd_timer 18935 1 snd_pcm
snd 60157 7 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5443 1 snd
Tried a couple different things either from the wiki or google searching, individually with a reboot between but no change.
# Keep snd-pcsp from being loaded as first soundcard
vi /etc/modprobe.d/alsa-base.conf
options snd-pcsp index=-2
# something i used on the old working system, doesn't help but not sure why I did it
vi /etc/modprobe.d/alsa-base.conf
options snd-pcsp index=2
#no modprobe conf, try wiki
vi ~/.asoundrc
defaults.pcm.card 0
defaults.pcm.device 3
defaults.ctl.card 0
Here is the output of alsa info script (http://www.alsa-project.org/main/index. … p_To_Debug) with all defaults, ie no modprobe changes etc.
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.61
!!Script ran on: Fri Mar 1 02:42:57 UTC 2013
!!Linux Distribution
Arch Linux \r (\l) NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
Manufacturer: To Be Filled By O.E.M.
Product Name: To Be Filled By O.E.M.
Product Version: To Be Filled By O.E.M.
Firmware Version: P1.60
!!Kernel Information
Kernel release: 3.7.9-2-ARCH
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
Driver version: k3.7.9-2-ARCH
Library version: 1.0.26
Utilities version: 1.0.26
!!Loaded ALSA modules
snd_hda_intel
!!Sound Servers on this system
No sound servers found.
!!Soundcards recognised by ALSA
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfae78000 irq 21
!!PCI Soundcards installed in the system
00:08.0 Audio device: NVIDIA Corporation MCP79 High Definition Audio (rev b1)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
00:08.0 0403: 10de:0ac0 (rev b1)
Subsystem: 1849:0397
!!Loaded sound module options
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : Y
!!HDA-Intel Codec information
--startcollapse--
Codec: VIA VT1708S
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x11060397
Subsystem Id: 0x18490397
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=1, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Front Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="VT1708S Analog", type="Audio", device=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Surround Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="VT1708S Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x13 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="VT1708S Analog", type="Audio", device=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x17
Node 0x14 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=1, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Amp-In caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x00 0x00]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x1e
Node 0x15 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x16 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Control: name="PCM Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="PCM Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Mic Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=2, ofs=0
Control: name="Line Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Control: name="Line Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=3, ofs=0
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x19 0x19] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 7
0x10 0x1f 0x1a 0x1b 0x1e 0x1d 0x25
Node 0x17 [Audio Selector] wcaps 0x300501: Stereo
Control: name="Input Source", index=0, device=0
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 6
0x1f 0x1a* 0x1b 0x1e 0x1d 0x16
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Surround Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x11
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410110f2: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x2
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x18
Node 0x1a [Pin Complex] wcaps 0x400581: Stereo
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Jack", index=0, device=0
Pincap 0x00002334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x01a19036: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x3, Sequence = 0x6
Pin-ctls: 0x21: IN VREF_50
Unsolicited: tag=02, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x26
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Control: name="Line Jack", index=0, device=0
Pincap 0x00002334: IN OUT Detect
Vref caps: HIZ 50 100
Pin Default 0x0181303e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x3, Sequence = 0xe
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=03, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x18
Node 0x1c [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Front Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Line Out Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x16
Node 0x1d [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x422140f0: [N/A] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 2
0x16* 0x25
Node 0x1e [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0000233c: IN OUT HP Detect
Vref caps: HIZ 50 100
Pin Default 0x42a190f8: [N/A] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x8
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 2
0x16* 0x25
Node 0x1f [Pin Complex] wcaps 0x400401: Stereo
Pincap 0x00000020: IN
Pin Default 0x503701f7: [N/A] CD at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0xf, Sequence = 0x7
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x20 [Pin Complex] wcaps 0x400701: Stereo Digital
Control: name="SPDIF Phantom Jack", index=0, device=0
Pincap 0x00000010: OUT
Pin Default 0x074511f0: [Jack] SPDIF Out at Ext Rear Panel
Conn = Optical, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Pin Complex] wcaps 0x400701: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x474411f0: [N/A] SPDIF Out at Ext Rear Panel
Conn = RCA, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x15
Node 0x22 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410160f1: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0xf, Sequence = 0x1
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x26
Node 0x23 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x410120f4: [N/A] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0xf, Sequence = 0x4
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x27
Node 0x24 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Center Playback Volume", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Volume", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Node 0x25 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Amp-Out caps: ofs=0x2a, nsteps=0x2a, stepsize=0x05, mute=0
Amp-Out vals: [0x2a 0x2a]
Converter: stream=0, channel=0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Node 0x26 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Control: name="Center Playback Switch", index=0, device=0
ControlAmp: chs=1, dir=Out, idx=0, ofs=0
Control: name="LFE Playback Switch", index=0, device=0
ControlAmp: chs=2, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3
Power: setting=D3, actual=D3
Connection: 1
0x24
Node 0x27 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Power states: D0 D1 D2 D3
Power: setting=D0, actual=D0
Connection: 1
0x25
Codec: Nvidia MCP79/7A HDMI
Address: 3
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x10de0007
Subsystem Id: 0x10de0101
Revision Id: 0x100100
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x04 [Audio Output] wcaps 0x211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Pincap 0x00000014: OUT Detect
Pin Default 0x18560110: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560121: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x1
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x08 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560122: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x2
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x08
Node 0x0a [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560123: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x3
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0a
Node 0x0c [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0xc0]: 48000 88200
bits [0xf]: 8 16 20 24
formats [0x1]: PCM
Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x58560124: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x4
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0c
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 8 Mar 1 13:41 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 7 Mar 1 13:41 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 6 Mar 1 13:41 /dev/snd/hwC0D3
crw-rw----+ 1 root audio 116, 5 Mar 1 13:41 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Mar 1 13:41 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Mar 1 13:41 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Mar 1 13:41 /dev/snd/pcmC0D3p
crw-rw---- 1 root audio 116, 1 Mar 1 13:41 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Mar 1 13:41 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 60 Mar 1 13:41 .
drwxr-xr-x 3 root root 240 Mar 1 13:41 ..
lrwxrwxrwx 1 root root 12 Mar 1 13:41 pci-0000:00:08.0 -> ../controlC0
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
!!Amixer output
!!-------Mixer controls for card 0 [NVidia]
Card hw:0 'NVidia'/'HDA NVidia at 0xfae78000 irq 21'
Mixer name : 'Nvidia MCP79/7A HDMI'
Components : 'HDA:11060397,18490397,00100000 HDA:10de0007,10de0101,00100100'
Controls : 43
Simple ctrls : 17
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%] [3.00dB] [on]
Front Right: Playback 25 [81%] [3.00dB] [on]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Surround',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 42
Mono:
Front Left: Playback 42 [100%] [0.00dB] [on]
Front Right: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Center',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'LFE',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 42
Mono: Playback 42 [100%] [0.00dB] [on]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [off]
Front Right: Playback 0 [0%] [-34.50dB] [off]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 0 [0%] [-16.50dB] [on]
Front Right: Capture 0 [0%] [-16.50dB] [on]
Simple mixer control 'Dynamic Power-Control',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Line' 'Stereo Mixer'
Item0: 'Mic'
Simple mixer control 'Smart 5.1',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
!!Alsactl output
--startcollapse--
state.NVidia {
control.1 {
iface MIXER
name 'Front Playback Volume'
value.0 42
value.1 42
comment {
access 'read write'
type INTEGER
count 2
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.2 {
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.3 {
iface MIXER
name 'Surround Playback Volume'
value.0 42
value.1 42
comment {
access 'read write'
type INTEGER
count 2
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
dbvalue.1 0
control.4 {
iface MIXER
name 'Surround Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.5 {
iface MIXER
name 'Center Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.6 {
iface MIXER
name 'Center Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.7 {
iface MIXER
name 'LFE Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.8 {
iface MIXER
name 'LFE Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.9 {
iface MIXER
name 'PCM Playback Volume'
value.0 25
value.1 25
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 300
dbvalue.1 300
control.10 {
iface MIXER
name 'PCM Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.11 {
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -1650
dbvalue.1 -1650
control.12 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.13 {
iface MIXER
name 'Capture Volume'
index 1
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -1650
dbmax 3000
dbvalue.0 -1650
dbvalue.1 -1650
control.14 {
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
control.15 {
iface MIXER
name 'Input Source'
value Mic
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Mic
item.1 Line
item.2 'Stereo Mixer'
control.16 {
iface MIXER
name 'Mic Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.17 {
iface MIXER
name 'Mic Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.18 {
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 31'
dbmin -3450
dbmax 1200
dbvalue.0 -3450
dbvalue.1 -3450
control.19 {
iface MIXER
name 'Line Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
control.20 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3075
dbvalue.0 0
dbvalue.1 0
control.21 {
iface MIXER
name 'Smart 5.1'
value false
comment {
access 'read write'
type BOOLEAN
count 1
control.22 {
iface MIXER
name 'Dynamic Power-Control'
value Disabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
control.23 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.24 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.25 {
iface MIXER
name 'IEC958 Playback Default'
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.26 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.27 {
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.28 {
iface MIXER
name 'Master Playback Volume'
value 42
comment {
access 'read write'
type INTEGER
count 1
range '0 - 42'
dbmin -6300
dbmax 0
dbvalue.0 0
control.29 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.30 {
iface CARD
name 'Line Out Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.31 {
iface CARD
name 'Mic Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.32 {
iface CARD
name 'Line Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.33 {
iface CARD
name 'SPDIF Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
control.34 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
comment {
access read
type INTEGER
count 6
range '0 - 27'
control.35 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.36 {
iface PCM
name 'Capture Channel Map'
index 1
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.37 {
iface PCM
device 1
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 27'
control.38 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.39 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
control.40 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
control.41 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
control.42 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
control.43 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access read
type INTEGER
count 8
range '0 - 27'
--endcollapse--
!!All Loaded Modules
Module
nfsv4
auth_rpcgss
nvidia
snd_hda_codec_hdmi
ir_lirc_codec
lirc_dev
joydev
ir_mce_kbd_decoder
ir_sanyo_decoder
ir_sony_decoder
hid_generic
ir_jvc_decoder
usbhid
ir_nec_decoder
snd_hda_codec_via
hid
mceusb
rc_core
snd_hda_intel
i2c_nforce2
i2c_core
snd_hda_codec
snd_hwdep
snd_pcm
snd_page_alloc
snd_timer
forcedeth
snd
soundcore
shpchp
pci_hotplug
evdev
psmouse
mperf
serio_raw
pcspkr
button
processor
wmi
coretemp
microcode
nfs
lockd
sunrpc
fscache
ext4
crc16
jbd2
mbcache
usb_storage
sr_mod
cdrom
sd_mod
ohci_hcd
ahci
libahci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x19 0x410110f2
0x1a 0x01a19036
0x1b 0x0181303e
0x1c 0x01014010
0x1d 0x422140f0
0x1e 0x42a190f8
0x1f 0x503701f7
0x20 0x074511f0
0x21 0x474411f0
0x22 0x410160f1
0x23 0x410120f4
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D3/init_pin_configs:
0x05 0x18560110
0x07 0x58560121
0x09 0x58560122
0x0b 0x58560123
0x0d 0x58560124
/sys/class/sound/hwC0D3/driver_pin_configs:
/sys/class/sound/hwC0D3/user_pin_configs:
/sys/class/sound/hwC0D3/init_verbs:
!!ALSA/HDA dmesg
[ 6.093571] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 6.093614] hda_intel: Disabling MSI
[ 6.093710] snd_hda_intel 0000:00:08.0: setting latency timer to 64
[ 6.743392] IR keymap rc-rc6-mce not found
[ 7.150166] Disabling lock debugging due to kernel taint
[ 7.450271] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
[ 7.450581] input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
[ 7.450836] input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
[ 7.451099] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
[ 7.453217] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20
FWIW, I even tried changing the HDMI cable, turning the amp on before or after the PC etc. No change.
Last edited by dave00 (2013-03-01 03:03:42)

Default install, clean boot and I get this error but the info above indicates there is a sound device. Confused!
[root@lounge ~]# systemctl status alsa-restore.service
alsa-restore.service - Restore Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-restore.service; static)
Active: inactive (dead) since Fri 2013-03-01 18:01:19 EST; 1min 2s ago
Process: 241 ExecStart=/usr/sbin/alsactl restore (code=exited, status=19)
Mar 01 18:01:18 lounge systemd[1]: Starting Restore Sound Card State...
Mar 01 18:01:19 lounge alsactl[241]: /usr/sbin/alsactl: load_state:1696: No soundcards found...
Mar 01 18:01:19 lounge systemd[1]: Started Restore Sound Card State.
[root@lounge ~]# systemctl status alsa-store.service
alsa-store.service - Store Sound Card State
Loaded: loaded (/usr/lib/systemd/system/alsa-store.service; static)
Active: inactive (dead)
Mar 01 13:41:03 lounge systemd[1]: Started Store Sound Card State.
Mar 01 13:45:54 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 13:45:55 lounge systemd[1]: Started Store Sound Card State.
Mar 01 14:04:19 lounge systemd[1]: Started Store Sound Card State.
Mar 01 17:25:11 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 17:25:11 lounge systemd[1]: Started Store Sound Card State.
Mar 01 17:39:05 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 17:39:05 lounge systemd[1]: Started Store Sound Card State.
Mar 01 18:00:51 lounge systemd[1]: Starting Store Sound Card State...
Mar 01 18:00:51 lounge systemd[1]: Started Store Sound Card State.
Journal
Mar 01 18:01:19 lounge kernel: hda_intel: Disabling MSI
Mar 01 18:01:19 lounge kernel: snd_hda_intel 0000:00:08.0: setting latency timer to 64
Mar 01 18:01:19 lounge alsactl[241]: /usr/sbin/alsactl: load_state:1696: No soundcards found...
Mar 01 18:01:19 lounge systemd[1]: Started Restore Sound Card State.
Mar 01 18:01:20 lounge systemd[1]: Started Linux Infrared Remote Control.
Mar 01 18:01:22 lounge kernel: input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.0/sound/card0/input7
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Line as /devices/pci0000:00/0000:00:08.0/sound/card0/input8
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Mic as /devices/pci0000:00/0000:00:08.0/sound/card0/input9
Mar 01 18:01:22 lounge kernel: input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:08.0/sound/card0/input10
Mar 01 18:01:22 lounge systemd[1]: Starting Sound Card.
Mar 01 18:01:22 lounge systemd[1]: Reached target Sound Card.
Edit: Am I correct in saying that the issue is because alsactl restore is running before the sound card?
Last edited by dave00 (2013-03-01 07:30:12)

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Is there a fix for Mountain Lion audio output settings after the laptop goes to sleep and wakes back up?

Mac Book Pro running Mountain Lion OS X 10.8.5 after the notebook sleeps audio and video does work (for example on YouTube). I have been able to temporarily work around this by toggling the settings on Built-in Output in Audio Midi Setup, Audio window between 2ch-20bit Integer and 2ch-24bit Integer. But this is a temporary fix until the laptop sleeps again.
When it's not working, all system sounds (emails "dings", delete file "swish", etc.) are silenced, and video playbacks on YouTube and elsewhere freeze and have no audio until the Audio Output settings are toggled then they all immediately start working.
Has anyone encountered the same? Have a long term fix for this annoyance?
I cannot upgrade the OS to 10.9 Mavericks yet because of a corporate policy - there is some conflict with 10.9 and our corporate VPN connection.

Apple support article:
Startup Grey Screen
You can try to check your hard drive.
Apple Hardware Test doesn't catch everything, so even if it doesn't find a problem, you could have one.
Apple Hardware Test

Help!! No AUDIO output from iMac through FW to mixing board (zed r16)

With my system stated below, I run an Allen-Heath ZED R16 board via FW. PROBLEM: I get NO Audio output to the R16 when I play iTunes or DVD/CDs in the iMac.
I DO get audio feed when I playback projects from Logic.
I have checked all System Prefs on the iMac (cahnged to the ZED); on Logic (changed to the ZED). I tried all different channels, routing, etc. NOTHING.
Can someone help?

Well, the Allen-Heath support site had the answer... quite surprised and pleased!!
Have to reconfigure the iMac speakers in the Audio/Midi preferences. The details are found in this URL:
http://allen-heath.helpserve.com/index.php?m=knowledgebase&a=viewarticle&kbarticleid=238
The ZED R16 is a great board but certainly not Plug' n Play.

Help! No Audio output In Logic Express 7

I have been running logic 7 Express with a MOTU Traveler for over a year now (with very few problems), and just this morning i have encountered a very puzzling problem. When i opened the song i was working on last night, i found that there was no audio output--just intermitant digital beeps at very high pitches (10-15k). i tried opening other songs; same problem. this problem does not occur when using the built in audio driver, so i was thinking it must be a hardware issue, but iTunes seems to output as per usual THROUGH THE MOTU so i'm really scratching my head here. hard drives etc seem to mount so the firewire port seems to be ok. i'm getting the same results (no audio playback and high digital pitches in Quicktime and Live as well...
has anyone with this setup ever experienced anything like this???!!!
thanks for reading,
dave
PowerBook G4 12" Mac OS X (10.4.6) 1.33 GHz, 1.25gb ram, MOTU Traveler

Check you preferences in LE for what you have selected for output. Also, and I am not 100% sure, because for me this is always already set, make sure each track has Output 1-2 on the channel strip. On my setup, I have my Tascam US-122 set for both input and output, then my monitor system is connected to the US-122. Now I don't recall which, but I think it was Logic that wants both input and output to be the same device. I am pretty sure, because I know I have used both in GB. Also, on my US-122, there's a switch for mono, so my recording comes in both speakers, as well as a direct monitoring switch, with a separate volume control, so I can balance my recording with the tracks I am playing to, to my liking. I am not familiar with your unit, but I'd think it'd have some similar features. Hope this helps some, anyway.

Audio Output to HDTV

Similar Messages

Maybe you are looking for