Audio output using HDMI in 2010 mac mini cuts out. Anyone know of fixes?

I have a 2010 mac mini that I hook up with my Samsung C6300 LED tv using an HDMI monster cable. I have never had any issues withn this setup prior to the new Lion software installed and ever since then the audio will cut out for a split second every minute or so (very annoying). I listen to my music library and watch movies through itunes and vlc and I experience this problem with all these tasks. I also have a MacBook Pro (early 2011) that i experience no such issue with while performing the same tasks. Is anyone else having such issues or know of a fix. All my software is up to date so I know that is not the problem. Any help would be much appreciated.
Sincerely
jortiz0221

Lion has created numerous issues for 2010 MacMinis for
lots of folks. However, it seems there is not a "one shot"
fix for everyone.
For instance, I have no issues playing music from iTunes
on my Mini, but iTunes movies stutter some times to the
point of being unwatchable. Yet, other software, PLEX and
XBMC for instance, have no similar issues for me. But there
are others that are seeing the complete opposite from my
experiences. Basically, I think Lion has too many "loose ends"
that are causing such a wide variety and unpredictability in
its operation.
As for VLC, gave up on that long ago as it seemed to flakey
to me and never could get it to work consistantly.

Similar Messages

Hi there, can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac Mini? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? Thanks in advance, Grtz T.

Hi there,
Can anyone tell me how to make make Garageband ignore HDMI as an audio output-device on a 2013 Mac mini i7 using an Apogee jam as an input for bass and a Behringer USB DAC with RCA audio output? Now it keeps on prompting me: Do you want want to use the HDMI device (monitor without audio) for audio output? I'm also suffering massive audio lag issues with the Apogee jam after waking the mini from sleepmode, wich pretty much renders it useless.
Thanks in advance,
Grtz T.

I think the easiest way to do this is to have the EyeTV app running in one user account and sent via HDMI to the TV, and use a separate user account for Screen Sharing. Both logins can be active at the same time and with Lion you can connect via screen sharing to which ever login you need.
With regards to the Mac video resolution changing, when it is not the current input on your AV receiver. This is 'normal', if the Mac sees no signal it drops down the a lower level. What you need is to buy a HDMI Detective Plus which tricks the Mac in to always seeing a signal and hence it will not drop down the resolution. See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
The Mac mini does have an IR receiver. This can be used with the EyeTV app, iTunes, and similar. Yes I believe EyeTV would run for prolonged periods quite happily, it is has been around for a long time and had most of the rough edges polished off. However one issue you will have to deal with is that it does not automatically update its program guide data. For this you might have to write or modify an AppleScript. Elgato support or their user forums will be a lot of help.
You can set EyeTV to convert recordings to an iTunes (Apple TV) compatible format and then delete them from EyeTV.
The HDMI Detective should solve your handshaking problems.

HDMI audio stopped working on new 2010 Mac Mini

I am running snow-leopard server. I have the HDMI connected to a Pioneer Elite SC-27, then via HDMI to a Panasonic Plasma TV. I get the digital picture feed just fine on the TV, but there is no audio. I checked the audio settings, SC 27 is selected as output.
Audio was running fine earlier today... just stopped working. Anyone else experience bugs with the HDMI out audio?

Try shutting down the computer and turning off the receiver and tv.
Take out the HDMI cable and swap the ends and make sure it's seating fully in both ports.
Then turn on the receiver and tv.
Then power on the Mini and immediately hold down these 4 keys on the keyboard: COMMAND OPTION P R
Hold them down until the computer chimes 3 times.
See if that resolves the problem.
If it doesn't, I would try another HDMI cable.

Everytime I try to use my itunes it freezes... does anyone know a fix for this

Please help

Hi
I would download the free Onyx application (Google will find it) and go through its sequence of maintenance operations: Verify, Maintenance, and Cleaning.
When its finished all these steps, I'd then reset the SMC and PRAM:
- Reset the PRAM: http://support.apple.com/kb/HT1379
- Reset the SMC: http://support.apple.com/kb/HT3964
If you still have problems after these steps come back to us
Bob

My email notification is defaulting on an old hotmail account rather than using the form submitters email address. Does anyone know the fix?

Help

Hi,
Email notification defaults to your account ID. If you want to change this default email, you will need to change the email (Adobe ID) of your account in "My Information" dialog under the account icon. A workaround is that you sign up a new account with your new email address and make your new account ID a co-author of the form, then choose your new email to receive email notifications. Here is a page on how to allow others receive email notificaitons: How do I allow others to receive email notifications when responses are received?.
Thanks,
Wenlan

2010 mac mini hdmi sound output

Hi,
i have following audio setup via hdmi of my mac mini:
mac mini -> yamaha rx-v 665 -> philips tv
If only the receiver is turned on i have it as display and hdmi audio output device with 8-ch sound output. But as soon as i turn on my tv, my mac mini switches the sound output to my tv with only 2-ch sound output.
Anyone an idea how to prevent switching my mac mini to the tv sound output?
thx

I am trying to get my Mac Mini (2010) to use the speakers I have connected for my Samsung 40" TV through my Yamaha receiver as well. I connected to the TV to my Mini via HDMI thinking it would take care of video AND audio, but I cannot get the audio to function. Do I need to connect from the headset port to my receiver? If so, into which port?
My dream of making the mini and TV combo is taking a hit.

Audio issues on Mid-2010 Mac mini upgraded to Lion

I'm using a Mid-2010 Mac mini that came with Snow Leopard but I recently upgraded it to Lion. Every app works pretty well except for audio playback. Whenever I play a game or play a movie, audio stutters every 8 to 10 seconds for like a sec and it comes back in. Video keeps playing fine. It's pretty annoying since I can't properly play games or watch movies anymore. The rest of my apps are working very well except for Boxer which seems to have taken a performance hit.
Currently, the hardware hasn't been upgraded in any other way - meaning it still has the original 2 GB RAM memory. It's connected to my HDTV via HDMI. It didn't manifest this issue until the upgrade to Lion.
I've tried closing every app but it doesn't seem to help. Hope you can help me out. Thanks!!

You need a newer model Mac to use AirDrop between an iOS device (e.g. iPad) and a Mac
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support

2010 Mac Mini, Front Row and 5.1 Audio

I recently bought one of the new 2010 Mac mini's for my home theater. I have video going to my TV through HDMI. (I do not use the TV for audio.) I'm feeding audio to my receiver via optical. The problem I'm having is with 5.1 audio through Front Row. I've installed Perian and enabled AC3 passthrough. 5.1 audio works great when I play a video in iTunes (it also works with eyeTV). When I try to play the same movies through Front Row, I'm stuck with stereo audio and see no way to change it. Any ideas?
Thanks in advance!

I too have the latest mini, hooked up to a Denon receiver via pass-through HDMI.
I am not an audiophile in terms of setting up this stuff and just want to know what I need to do to get the optimum performance out of this mini, audio wise.
When I go to Audio MIDI Setup app, my receiver (DENON-AVAMP) is listed next to the "source" button. I have no clue about channels, bits, etc. When I click on the "Configure Speakers" button I am presented with different configurations so I selected "Multichannel" versus "Stereo". And I can see where you can test all 5 speakers and subwoofer, but I just don't know which "format" I am supposed to select.
The 5.1 mapping is shown when I select 8 channel/16 bit, 8 channel/20 bit, or 8 channel 24 bit. I can click on each speaker in this map and it tests properly no matter which one of the above combinations I select. Just not sure which one I am supposed to be using.
All I know is my Denon is a 5.1 system and all this works perfectly (getting 5.1 sound) with my Playstation 3 hooked up the same way to the Denon.
Does anybody know the correct settings to output 5.1 sound from this Mac Mini?
Thanks guys!

Screen corrupt 2010 Mac Mini HDMI (Static/Snow/White Noise)

I've just upgraded my 2010 mac mini to Lion, this is connected to a projector via HDMI to a Denon amp. Before the upgrade there were no issues the picture was completely clear and was usable in all resolutions.
Now that lion has installed the display is not usable, all I can see is 99% static and a corrupt row at the top of the screen where the menu bar can be just about made out.
Nothing has changed to the setup other than installing Lion, if I use screen sharing I can see the desktop happily, the OS is fully responsive.
I haven't yet tried to connect it to another monitor as I don't have a spare, I'll attempt this over the weekend, has anyone else experienced this issue?

I've got a similar issue and seems like a few others also have problems as well
https://discussions.apple.com/thread/3196192?tstart=0
My Mac Mini wont boot to HDMI and Screen Sharing wont link in since Lion upgrade......
A makeshift solution is unplugging the HDMI during boot up, give it 30sec's - 1min...plug it back it and then it should come up.... works for me for now.....
hopefully someone has a more permanent solution or mac solves the issue ASAP....
Cheers

Install Windows 7 on a Mid 2010 Mac mini using USB or SD media?

Is is possible to install Windows 7 on a Mid 2010 Mac mini using USB or SD media? I have not figured this out. Here's what I have observed:
I can install OS X Lion using USB or SD media. Both are detected in the boot menu, and will boot.
An SD card with Windows 7 installation files formatted MBR/FAT32 using diskpart appears (with an SD card icon) in the boot menu but when selected as a boot device, the boot fails and the existing OS X instance on the Macintosh HD starts. A USB stick formatted as described does not appear in th boot menu at all.
An SD card or a USB stick formatted as described will boot on a Mid 2011 MacBook Air, and can be used to install Windows 7.
Is this due to EFI differences between a Mid 2010 Mac mini and a Mid 2011 MacBook Air?
Thanks.

The Mac Mini Mid 2010 has a DVD player built in, you can startup and install from a Windows 7 DVD. The Mac Mini Mid 2011 does not have a DVD player built in. I am happy that in new computers I can make use of an USB-stick to install Windows 7. Windows 7 uses MBR and Mac OS X uses EFI and that is why it was not possible on a Mac Mini Mid 2010. I think the EFI on a Mac Mini Mid 2011 is different.
I should like a firmware update on my Mac Mini Mid 2010 if possible. In that case I could choose between DVD or USB stick if I want to install Windows 7.
I also have a FireWire CF Card Reader. I think it is not possible to install Windows 7 via FireWire too.
I do have an external USB HD with 2 partitions: Mac OS X 10.6.8 and Windows 7, but is is not possible to start up Windows 7 from the external HD. It is possible to start up Mac OS X 10.6.8 from the external HD on a Mac Mini Mid 2010.

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

Getting 1080p on Proscan 40" HDTV with 2010 Mac Mini via HDMI

So I have been trying many things to try and get some sort of good resolution on my HDTV (Proscan 40") with the new Mac Mini, HDMI to HDMI. So far, no luck at all. Although the television says that it is full 1080p at when 1080p is selected in display the text is so jagged it is unreadable. I know very little about this type of thing so I am feeling out of my element.
I realize that the issue could be with the scaler on the tv (?) but since the menu is limited I cannot change it. I have downloaded SwitchresX and tried some things but really don't know what I am doing so if anyone has any pointers I would love to be looking at a beautiful 1920x1080 picture....

This is probably due to how your TV is handling the signal. On my Samsung if I label the HDMI port the Mac Mini is connected to as "PC" it handles the image differently to improve the picture quality from a PC. Fonts appear smooth as I would expect when viewing PC content on a monitor. The down side is I lose a lot of the settings that are normally available to different devices like a DVD/Bluray player.
I do not have it set this way and have the same issue as you where fonts are jagged. My reason for doing this is the color is actually better utilizing the connection as a device source than a PC source.
I didn't have a chance to look at the manual for your TV but I would check to see if you have an option like this.

2010 mac mini Home cinema sound and Home cinema headphones

Hello
im waiting for my 2010 mac mini to arrive,
ive experience with home cinema setups in the past.
Im looking to use my mac mini as a home cinema set up.
Im fine with the visual side ( projectors and hdtv).
The audio.
How on earth do i get home cinema sound into headphones.
due to where i live, headphones are the only option i have ( neighbours dont like noise.)
ive tried :-
sony mdr-drs7100
Pioneer SE-DRS3000c
pioneer dir-8000c.
the three above are ok as they have home cinema audio processing built in and worked with the optical digital output fine.
bass on the above 3 is weak.
i aso will prefer a wired set of headphones ( had enough of wireless)
im now looking at another route.
1) a decent headphone amplifier capable of playing DTS and Dolby digital 5.1
2) decent set of headphones to handle the above.
anyone any setups they can share that work
many thanks

Hey David,
My issue was resolved by ensuring that I was using a PAL resolution and frequency (720p @ 50 Hz or 1080p @ 50 Hz) for my PAL TV. Anything else causes audio stuttering through my HDMI cable.
Don't ask me why. Try this on your setup by using only the one of your TV's native resolutions and frequencies (Should say NTSC Television on every native TV resolution if you are in the US, PAL Television in Europe). If you do have an NTSC TV, then you might be able to use all of the 60 Hz frequency resolutions without HDMI audio out problems, but I wouldn't count on it.
From what I've researched on the issue, it is only TV's that have this problem, and it is a strange one, as it is actually a display setting problem with an audio error symptom.

Cannot select 5.1 surround in Midi Setup on 2010 Mac Mini

Hi all,
I have tried searching around the net to answer this question but nothing seems like a concrete answer.
2010 Mac Mini connected via HDMI to...
Sony 55NX720 3D TV which is connected VIA HDMI (return audio) and Toslink Digital Audio to...
Sony Home Theater DAV-DZ840K which outputs in 5.1
However, when using Audio Midi Setup on OSX Lion, there is no way for me to tell the Mini to output in 5.1, the only options i get a 2channel. What is weird though, is if I use a program called Plex and tell it to output in 5.1 then it does.
So why will OSX itself not allow me to tell it to output in 5.1? I can't use plex for everything, and other programs such as Bino don't have a setting to tell it what to output.
Thanks

Hello,
Don't know if you have found the solution already but I decided to post a solution that helped me.
I am not using Mac Mini but a MacBook Pro mid 2010 model. Anyway, I found the solution from this thread which is from people having the same problem with Lion. I used on my Mountain Lion and it fixed the problem for me.
So, in short:
1. Go to the Audio MIDI Setup from Utilities
2. Select the device you want to use
3. Change the Formet from "2ch-16bit Integer" to "6ch-16bit Integer"
4. Now you should be able to change from stereo to 5.1
In the other thread there were different choises in the Format section, but those were the ones that I had. Anyway changing this Format settings fixed the problem for me since I can now see and select the 5.1 option as well.
Hope that helps

2010 Mac Mini OS 10.10.1 screen is stretched out

Hi,
I have a 2010 Mac Mini that I use at work and I also use a second monitor via an adapter through USB. The setup worked until I installed Yosemite (10.10.1) on Friday.
When I go to Settings / Displays I don't get all the resolution options I had before (for my main monitor, 20", res. 1680 x 1050) and my secondary monitor isn't recognized at all (as if it wasn't even connected).
This is my main monitor: http://www.pcworld.com/product/1417007/lg-l203wt-widescreen-lcd-monitor.html
I've tried resetting the PRAM but that didn't work. I'm a designer and I can't work with my screen stretched out.
Can anyone let me know if there is a way to fix this???
Thanks in advance!

Look for update software for the USB video adopter.
The 2010 mini has an HDMI video adopter and came with a HDMI to DVI adopter, It also has a mini displayport video output. You can get an adopter to connect HDMI, DVI and VGA,
Mini DisplayPort with support for up to 2560-by-1600 resolution
HDMI port with support for up to 1920-by-1200 resolution
DVI output using HDMI to DVI Adapter (included)
VGA output using Mini DisplayPort to VGA Adapter (sold separately)
Support for extended desktop and video mirroring across both ports

Audio output using HDMI in 2010 mac mini cuts out. Anyone know of fixes?

Similar Messages

Maybe you are looking for