Audio output via headset jack

I can't connect anything via the headset jack so I cannot play music except though the phone's speakers

Hi PeterPa,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
You could also try clearing the Smart Connect application to see if this app based,
Menu > Settings > Apps > All > Smart Connect > Clear Data 
let us know how you get on.
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Line-level audio recording via headset jack

    I'm interested in using my Touch to run the "FourTrack" app - but want to record line-level rather than via a mic. (I'm not very technically minded.)
    Is there any reason that I can't use an "iPOD VIDEO / HIFI CABLE, 3.5mm RCA to AUDIO VIDEO AV TV Cable for IPOD Video Photo Nano Mini" (as it is described on Amazon) and use the video RCA plug (the yellow one) for my audio in.
    (I guess that the touch expects a mic-level input, rather than line-level. I'll be getting a DI Box if that assumption is correct.)

    Hi PeterPa,
    Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    You could also try clearing the Smart Connect application to see if this app based,
    Menu > Settings > Apps > All > Smart Connect > Clear Data 
    let us know how you get on.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

    Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

    You can output audio thru HDMI, with appropriate adapter.
    You can use additional cheap external usb audio for monitoring.

  • KN9 Platinum - is audio output via both SPDIF ports possible??

    I am looking at this board because it has both an optical and coaxial SPDIF output - can you tell me whether these can be plugged into and used simultaneously for HD Audio output. ie I want to be able to output a single digital audio stream from an application like PowerDVD via both connections.
    Note this is not about multi streams from different applications - just a single stream via both SPDIF ports.
    For an HTPC setup I want to be able to take the optical SPDIF output to a surround sound receiver and the coaxial SPDIF output into an HDMI enabled graphics card which includes audio input so I can then take both video/audio to another monitor.
    Thanks for your help.
    Ben

    Yes, audio will do this video won't.

  • No audio output from headphone jack?

    I have no audio coming out of headphone jack on my 60 GB 'pod. Its songs will play normally through itunes but output from stereo jack is kaput. What gives?

    Now this is an area that I am not familiar with.  I do not know what your audio source is (microphone, DVD player?) and exactly what you are trying to achieve.  You may have to use the Audio MIDI application so look at that to see what it entails.
    I suggest that you start a new discussion listing your specific objectives.  There are fellow users well versed in this area, I am not. 
    Ciao.

  • Connecting MACBOOK to home audio system - via 'headphone' jack?

    When setting up the MACBOOK to deliver its audio output to an amplifier/receiver, how is that best done?
    That is, I assume a y-cable (stereo mini plug-to-(2) RCA plugs) might not be the best way, since it's taking a 'headphone' level signal to what are supposed to be 'line level' inputs.
    But are there other better ways of doing this, given that the 'headphone out' is all the MACBOOK has?
    Thanks.

    Just realized that was a full size Toslink and not the mini one on a MacBook. You could either use an adapter or a purpose-built full-size Toslink to mini optical.
    http://www.amazon.com/TOSLINK-TO-OPTICAL-MINI-ADAPTER/dp/B0002MQGRM
    http://www.amazon.com/Belkin-AV20001-06-WHT-Digital-Optical-Mini-Toslink/dp/B000 7MVX48
    http://www.amazon.com/Cables-Go-Premium-Digital-optical/dp/B0002JFN10

  • Z77a GD65 simultaneous audio output via digital and analog jack?

    Hi,
    Does anyone know if it is possible to use the digital audio spdif out, and the green 3,5mm jack (I use it for my headphones) at the same time?
    When I use the digital out, and I run a 'test' with the analog out, I can hear the test signal so technically it should work.
    However, I can't find the right settings to actually use both outputs (same source: for instance iTunes) at the same time.
    Any advice? Thanks in advance!
    Regards,
    Jeroen

    My old msi cuba 7301 from 2007 has an spdif output, and I was able to use this digital out together with the 3,5mm line out (which I used for my headphones) simultaneously. I understand what you're saying, but I'd say the user should decide in what way he/she wants to use the product  . Technically, it shouldn't be a problem, since I can hit the 'test' button and hear the sounds through my headphones via 3,5mm stereo out, while playing music through the digital out.
    Anyone from MSI who knows the answer? If it was possible in 2007...
    Thanks for your answer

  • Mutli channel audio output via usb?

    Hi there
    I've had a browse through the support forums and can't find an answer to my question, so here it is:
    I want to split the audio channels through the internal soundcard (I have an ibook g4) so that I can use audio mixing software.
    Before I go out and buy some usb speakers, I was wondering if connecting speakers through the usb port would automatically do this - or, is there a way to assign an output route for each channel within the computer?
    Any help is much appreciated.
    Thanks

    You'll need a "usb soundcard" that you can purchase from both apple store or just google it and I'm sure they have them all over the place (ebay, thinkgeek, ect). The built in soundcard is a 2 channel 44khz sound card with 1 output and 1 input via the built in microphone. Also, the only usb speakers I have ever seen are just usb powered, but they still plug in to the headphone plug.

  • Is audio output via HDMI and componet cables possible?

    When I watch movie I want audio through my TV speakers (via HDMI). That way I can control the volume through my TV remote.
    When the TV is off and when I want to listen to music, i want audio to go to my Creative Labs "stereo" via audio component cables.
    Is it possible to have both HDMI and audio component cables plugged in at the same time? to different sources and both outputting audio (not at the same time)?
    thanks

    Yes, audio will do this video won't.

  • GarageBand audio output via bluetooth

    Hi,
    I have a Bluetooth A2DP headset and when connected to iPad I can play songs and video. However GarageBand does still output audio to iPad speakers.
    Request some one to help
    Regards,
    Harsha Kodnad

    Not really. You can play the audio through Bluetooth, but the latency is huge and it's impossible to play any instruments live. All you can do is listen to recorded sessions.

  • (Too) Variable Audio Output through mini jack

    Tried looking through prior posts to see if anyone had remotely similar problems. Just lately my 5G iPod will radically change in volume level mid-song; so much so that it distorts and is in danger of blowing my speakers in my car. Don't have Sound Check on but doesn't seem to be an issue here as it's midsong. I mostly listen to it through speakers plugged in to the mini jack, or headphones and not the dock. Any ideas what this might be caused by?

    http://support.apple.com/kb/HT4241
    Only the most recent late 2010 MacBook Airs support audio over Mini Display Port.
    For an older machine, you'll need something like this: http://www.amazon.com/Mini-DisplayPort-HDMI-Adapter-Audio/dp/B0033SM2BQ/ref=sr_1 _14?ie=UTF8&qid=1306806721&sr=8-14 or this: http://www.amazon.com/Displayport-Toslink-Female-Converting-Adapter/dp/B003BS2PF G/ref=pd_sim_sbs_e_5

  • Audio output via firewire

    I can not get audio working through firewire on my late 2013 MacBook Pro 13".
    If I test channels in channel setup it gives me static, but if I play iTunes od Spybot nothing happens.
    Internal speakers work fine.
    Any ideas what to do?

    I am connecting it through the firewire thunderbolt adapter. Then firewire 400/800 cable, because Presonus mixer has Firewire s400 port.
    Funny is that iTunes worked fine in the morning. Then I started to check why I can not play Youtube through firewire. From Audio MIDI Setup - Presonus Firestudio - Output - Configure Speakers I changed Multichannel channels. That was all I changed.

  • HDMI Audio Output via Mini Display Port to Sharp Aquos TV cuts out every 10 seconds

    I haven't had an issue til I recently did a software update to my Mac Pro. 
    I have two mini-display ports on the back of my machine but always have been able to listen to audio from the HDMI connection without an issue. Anyone else having this issue?  I checked and reset all the setting on my Television and get prompted that a icompatible PCMI audio signal is being recieved.
    PLEASE HELP!
    Thanks!

    I have seen one report that this is an acknowledged bug in OS10.6.8, the only cure for now is reverting OS:
    http://www.macintouch.com/readerreports/snowleopard/index.html#d19jul2011

  • Satellite laptop: connecting video out to projector causes hum in (headset) audio output

    Our church connects video output from the laptop to a projection system and audio out (via headset jack) to a sound board mono channel (line in).  Stereo to mono adapter.  We get a significant hum in the audio whenever the video cable is plugged in.  Doesn't matter whether the attached projection equipment is on or off, it's all about plugging the video cable into the laptop.  Unplug the video cable and the hum disappears.  Obviously we have tried all sorts of things to isolate the problem but it all comes back to plugging in that video cable.  We made sure there were no nearby power supplies or other equipment that might throw out interference.  Has anyone ever encountered this problem and  have any suggestions?  Thanks in advance for any help you can offer.

    Using a Satellite PSBY1U laptop.  Video out is not HDMI but the other (VGA?) connector.  We are connecting audio out from the headset jack direct to a mixer channel.  No microphone is connected to the laptop.  We looked at every sound and video-related menu we could find and could not see any settings that would seem to be relevant to the problem (we changed lots of settings anyway and nothing helped).  Naturally we played with audio volumes, different auto cables, etc.  Bottom line is we get clean audio until we plug the video cable into the laptop, then we get a very prominent hum from the audio output.  Video cable goes straight to a projector, doesn't matter whether the projector is turned on or off.  The audio and video cables are never closer than four inches from each other.  It's weird.

  • No audio from headset jack

    I am wondering if there is an app or other process that would possibly turn off audio to the headset jack. The headset that I have used in the past is functioning, but when attached to my Droid Razor Maxx no longer plays audio. When plugged into my Razor, I no longer receive audio through the ear pieces, but the audio still plays through the phone's speaker. Has anyone else experienced this problem?

    You can try restore in iTunes also
    If that does not work yeah call 1-800-MYIPHONE or make an appointment at an Apple store with a genius

Maybe you are looking for

  • How to update my ibook G4 with out itunes

    how to update my ibook G4 with out itunes

  • Spaces icon in the dock

    For the life of me I cannot figure out how to put the spaces icon in the dock. Spaces are working correctly and I can use them in the menu and with the hot key but I can't figure out how to get an icon in the dock. cheers

  • Transfer depreciation cost to COPA

    Hi COPA gurus, As i know, there is no way to assign assets to profit segment, and depreciation run is automatic, so how to transfer depreciation cost to COPA directly (not via cost center then allocation to profit segments)? Another point, business t

  • Auditing in Discoverer

    Hello All, How to do auditing using disocverer. suppose there exists auditng on per_pay_proposals. Kind Regards, Kumar.

  • Problems for retrieving image attributes

    Hi, I am a new user for Oracle interMedia and i have following problem. I have wroten ein java programm to retrieve the image properties. At First, the images (jpg, tif) are stored as BLOB in the table, then i use the function setProperties() to set