Audio playback even though region has ended

Hi Guys,
I am currently editing recordings and I seemt o have a rather strange bug/problem.
When cutting, editing the regions I can still hear the recording even though the the audio region has already ended. Also, the waveform doesn't seem to correspond at all to what I can hear. Refresh overview doesn't change anything. there is no overlap of regions and all other tracks are muted.
This is the same in Logic 10.0.4 as in Logic 9.1.8
Thank for the help!

figured it out,
it was the RX 3 Declicker plug in that caused a delay (even when in bypass mode)

Similar Messages

  • Audio beeps even though it has been rendered

    Any ideas why? Thanks

    Well, even if it is rendered, if it is not 48k 16bit stereo, it might beep. But there is an option in the SYSTEM SETTINGS in the PLAYBACK CONTROL tab...you can uncheck BEEP WHILE PLAYING UNRENDERED AUDIO. But yours is rendered so I'm not sure if that will help.
    Shane

  • Format address panel in iCal to show Department from the address book. At the moment it is showing 'Job Title' even though that has been removed in Address Book.

    Can anybody help please How do I Format address panel in iCal to show Department from the address book. At the moment it is showing 'Job Title' even though that has been removed in Address Book.

    I have a similar problem. I actually spoke with a Paypal customer Representative a few months back who informed me that they had deleted all of my previous *Hidden* Address but when I just purchased an item today on a online merchant's site that I had never been to before and checked out using their Paypal option, I noticed that my default shipping address was in fact my old address and when I went to change the address to my current address, I noticed all of the old addresses I ever used were still there. I've just spoken with 2 separate paypal representatives who confirmed on their end that all of the old address have been deleted and the only one they have on file is my current address. Can anyone provide me an explanation as to why the old hidden address can still be showing up when I check out on merchant's sites using paypal even after they've seemingly been deleted? The last Representative suggested clearing out my browser's cache, but I don't believe that will resolve my issue. Thank you in advance.

  • How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

    How can I get my ES2 loops to play correctly? I keep getting the message that the audio is not found when I drag the loops from my audio browser even though they play fine in the preview.

    It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop.  And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure  what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?

  • HT204074 I have our music collection on iTunes Match for my PC, ipad and iphone.  Can I share that music collection with my wife so she can play that with her iphone?  Even though she has a different Apple ID from me?

    I have our music collection on iTunes Match for my PC, ipad and iphone. 
    Can I share that music collection with my wife so she can play that with her iphone?  Even though she has a different Apple ID from me?

    Her iPhone will need to be set up to iTunes Match using your Apple ID to be able to share music via iTunes Match. Otherwise you'll have to download the music to your computer and then copy those tracks into her iTunes library, assuming hers is separate.
    Regards.

  • A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  WHen we plugged it into the port on the keyboard, the device works. Why?

    A barcode scanner that was connected directly to the Mac's USB port stopped working as the "USB had too much power drawn", even though it has worked for over a year in that port.  When we plugged it into the port on the keyboard, the device works. Why?  Obviously the device is operational.  Could the USB port have burned out from having too much power drawn?  If so, is it reparable?

    It can't draw "too much" power, it can only draw as much as the USB port is able to provide and no more. IIRC, the keyboard port has a lower power output than the iMac's port.
    That being said, yea, it's possible that the port has failed and it can be replaced or if another port works you can use that one. Although if it is still under warranty or covered by Apple Care, then I would take it to an Apple Store or service provider to get the port repaired.

  • How to delete parent table data even though it has child records

    hi all,
    How to delete parent table data even though it has child records.
    ex: delete from pa_request cascade constraints;
    But this command is not working .
    Regards,
    P Prakash

    833560 wrote:
    ex: delete from pa_request cascade constraints;cascade constraints is DROP table option. It can't be used with DELETE. You need to delete child rows first or drop foreign keys and recreate them with ON DELETE CASCADE. Then:
    delete from pa_request will automatically delete child rows. However, personally I don't like ON DELETE CASCADE. You can, by mistake, delete half of your database without even realizing it.
    SY.

  • HT201263 itunes will not recognise my encryption password even though it has been reset. cant restore to last backup?

    itunes will not recognise my encryption password even though it has been reset. cant restore to last backup?

    I'm not aware of a way to reset the password for an encrypted backup. If you have forgotten the password for an encrypted backup, your only alternative is to put the phone in recovery mode and restore it as a new device. Your data will be lost.

  • RENAME:  When I rename a photo why can I not find it doing a search?  The photo obviously keeps its old name even though it has a new one   IPhoto 09

    When I rename a photo why can I not find it doing a search?  The photo obviously keeps its old name even though it has a new one>  IPhoto 09

    Thanks, that makes sense.  If I do a search in IPhoto I find it.  I have 6 grand children and also have had my camera for quite awhile and it starts file names over again after 10,000 pictures. (I don't have all these on the computer) but now I have some files with the same name  ie  img_4   and img_4
    Thanks again for your help!!
    HC

  • Tables can be maintained even though Client has status 'not modifiable" ?

    I am looking, list of tables which i can maintain directly even though "Client has status 'not modifiable'" status
    example : T000
    Rgds

    No ..No...Siddesh,
    You are understanding my requirement in reverse.
    We are now not in execution of giving the access.
    i regret, if i am failing to explain my requirement
    A Auditor wants
    a). He wanted to know the users having S_TABU_DIS auth object with 02 value and assigned authroization groups.
    b). He wanted list of tables including Z tables that can be maintained directly thru maintenance view
    Auditor will do some excerse Directly Maintained Tables (vs) Authroized users
    He will come back with a list of tables for which we have to give the logs.
    I tried my best to explain my requirement.
    To summarise  - I repeat  i am looking  "List of Tables that can be maintained directly - When Client has status 'not modifiable" ?
    Thanks in advance for your time for this query.
    Rgds

  • PR CC doesn't display audio waveforms even though option is checked

    PR CC doesn't display audio waveforms even though option is checked

    I want to thank you for your reply. I figured out what was happening and
    thought you might want to file the information somewhere.
    The problem occurred whenever I imported an older legacy project. Even
    though it was set to display waveform, it wouldn't do it until after I
    closed and reopened the project file.
    Anyway, thanks again!

  • I've just rented a movie on iTunes, and I tried to start it before the download finished, and now even though it has finished when I try to play it nothing happens. Is there a way to reload it without paying again??

    I've just rented a movie on iTunes, and I tried to start it before the download finished, and now even though it has finished when I try to play it nothing happens. Is there a way to reload it without paying again??

    I'm not convinced that starting it before it was downloaded has anything to do with it, you should be able to do that. I'd try restarting the computer and if that doesn't help, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

  • My iphone keeps switiching off even though it has plenty of battery, how can i fix this?

    My iphone turns off and shows the 'no battery' image every time even though it has plenty of battery sometimes it even has 100%. If i take this to the apple store will they charge me to get it fixed?

    Update to iOS 7.1.1. Then bring it to an Apple Store if it isn't fixed.

  • "Add a Printer" can't locate my printer software even though it has been downloaded to the hard drive. How can I guide it to the software?

    "Add a Printer" can't locate my printer software even though it has been downloaded to the hard drive. How can I guide it to the software?

    What did you download and from where?  Most downloads go to your Home/User/Downloads folder unless you've specified a different location in your browser. 
    If you downloaded the drivers from the App Store the drivers will be installed automatically and all you need to do is go to the System/Printers & Scanners preference pane as described below.
    You will have to install the drivers after downloading the installer package.  Lastly go to the System/Printers & Scanners preference pane and add the printer there.  It will automatically locate the drivers and set it up.

  • My Macbook wouldn't start up even though it has power...What can I do?

    My Macbook wouldn't start up even though it has power...What can I do?  The power light stays on and won't go off.

    I have the exact same problem and waited it out and got to my homescreen.  Whateve the problem is fried my bluetooth and my trackpad.  I tried starting it again and couldn't even get to homescreen, it stayed on the bluescreen with the wheel of death.  So, I took it to genius bar today. I was informed that my logic board is fried and it needs to be replaced.   $300 repair that I'm looking at...

Maybe you are looking for