Audio Plays on Left Speaker Only?

When I recorded my footage, I had the audio running into my camera from an XLR cable connected to my shotgun mic. It was connected into input 1, which records the audio into the left channel.
When I edit the footage in Final Cut, I delete the right channel, which has no audio, and I duplicate the left channel and drag it onto audio track 2. I then make audio track 1 and 2 a stereo pair. I do this for all of the clips and I then send the audio project to Soundtrack Pro.
Once the project loads in Soundtrack Pro all I hear is the left channel and I'm unable to pan the audio to hear it from both speakers. Does anyone know what I am doing wrong?

Ken,
Check your Submix. Make sure it is set up as a Stereo output.
-paul.

Similar Messages

Mono audio playing from left speaker only

For websites who have mono recorded (single channel) podcasts, audio in firefox will only play from left speaker instead of picking center channel.
If audio is downloaded and played on seprate dedicated player it defaults to center or if same site is played in IE also defaults to center.
Stereo recorded podcasts have no issue.

I assume that not a Flash player is used in this case, but that this is an issue with the (built-in) HTML5 media player and the audio tag is used.
Is that correct?
The Flash player should show the Flash context menu if you right-click the player area.

Stereo audio plays back left channel only - premiere pro CC2014

Dear All,
I recently upgraded to premiere pro CC and find that (just like sometimes in CS6) when i place an audio track (or clip with audio) to the timeline it plays back LEFT channel only. When I move the same clip to another (existing or newly created) sequence it becomes two channel stereo and plays back OK.
The question is, since i created sequences with the very same audio settings, what might cause this issue.
(fill right with left channel does not work because it IS a stereo track i suspect sg is wrong with my sequence settings- but i cannot figure out what exactly.)
I hope it's not a bug and it is just me doing sg wrong. all input is highly appreciated! THX in advance!
Misi

I know i just happened to be mid-project when trial period ended...
Still looking for the why's though, since I asked around and there ARE some people who expőerience similar issues!
Thanks in advance (Ann, too)

Buzzing audio out of left speaker only during dvd playback

Anyone else have this problem. I can play cds fine and all other audio sounds fine, but when i play a dvd i get a weird buzzing out of the left speaker. I should also note that it is not constant, it occurs with things such as loud voices and some music.

Now i can confirm that it happens in quicktime as well. Is this hardware or software related? Any input would be greatly appreciated. Also, it isn't so much a buzzing as it is almost like an echo after some loud speach.

Quicktime only plays from left speaker!!! (audio)

Right, so I want to do a couple of screen recordings and I have installed soundflower and setup everything so when I do a screen recording I can hear and Mac audio clealy and my microphone output clealy. But when I listen to it back all I can only hear all the audio from the left speaker? I did and screen recording from just my microphone through my soundcard, so input 1 and thr same thing happens? Is this ment to happen?? In the past I have recorded in and both speakers were working.
My setup is Microphone into iput one on soundcard and then select soundcard input in quicktime when recording.
Can anyone help!!!

To Start with, check in sound balance...to do that...
Go to control panel -> Sound -> Double Click on Speakers -> Levels -> Balance...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

My dvd only plays the left speaker of my song...

Hello everyone. I recently exported onto a dvd from adobe premiere 2.0 that included a song that i had recorded in mp3 format.
In the song, some of the instruments come out of the left speaker, and some come out of the right. When i play this video on a standard dvd player through a television, the mp3 only plays the audio that is supposed to come out of the left speaker, but it plays it through both speakers. This renders many of the instruments unhearable.
When i play it through a computer, though, with a dvd decoder, it plays everything perfectly.
What should I do?

MP3's are very often problematic. First, I would check your source file in G-Spot, to see what it reports, 2-channel, or 1-channel.
Personally, I always convert ALL MP3's to PCM/WAV and Import those. This eliminates the issues, and Audition (or the freeware, Audacity) can do this easily. The only exception will be tiny SFX files, and most are mono anyway. Where did your MP3 come from?
Good luck, and let us know how it goes,
Hunt

I have iPhone 3GS, and everytime I go to listen to my music with my headphones the sound only goes to one ear and when I listen to music with the speakers at the bottom speaker the left speaker only works! Can someone PLEASE HELP ME?

My music only plays in my left ear when I'm wearing my headphones and when I'm listening to music without my headphones the music only comes out through the left speaker. CAN SOMEONE PLEASE HELP ME,? YOUR HELP WILL BE MUCH APPRECIATED.?

All iphone have one and only one speaker at the bottom.
Have you tried another set of earphones? Maybe they are the problem?
Have you made sure that the headphones are inserted all the way?

Audio output from left channel only

My iPhone 5s (iOS 8.1.1) suddenly developed a problem with audio output last week after about 9 months of ownership. Through the headphone socket and Bluetooth streaming, only the left channel could be heard. I arranged an appointment at the Apple store and they confirmed after they carried out a restore (iOS 8.1.1) that there was only audio from the left channel. The phone was replaced under warranty.
My new phone was partially set-up in store and all I had to do was load my backup when I got home. I loaded the backup from my Mac and tested the audio output. To my surprise, the new phone had exactly the same problem as the one that was diagnosed as faulty in the Apple store i.e., audio output on the left channel only. I contacted Apple support via chat and explained the issue. I was advised to test the new phone without my backup being loaded. I restored the phone and tested the output using both Bluetooth and the headphone socket and there was a stereo output as normal. I reloaded my backup and it returned to left channel audio only. I was advised to then reset the phone and this cleared the problem. Corrupt backup data??
What I can’t understand is that two phones exhibit an identical problem, with one being a hardware issue and the other apparently a software issue. Too much of a coincidence if you ask me.
Is it possible that an app could cause a problem leading to a hardware failure?

Submit bugs to http://www.adobe.com/go/wish . More on how to give feedback: http://bit.ly/93d6NF

Airport only plays from left speaker

Just got the Airport Express to hook up to me receiver so i can play music wirelessly from my iphone 5. I hooked it up the same way i used to hook up my phone to the receiver and its only playing out of the left speakers. Why? When i hook up my phone it plays out of all the speakers. I also tried hooking the iphones headphones into the airport and it only plays out of one speaker. For $100 i figured it would play out of all the speakers.

To Start with, check in sound balance...to do that...
Go to control panel -> Sound -> Double Click on Speakers -> Levels -> Balance...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

IChat Audio out of right speaker only

Not sure what is going on but iChat only sends chat audio only to the right speaker on my MacBook Pro. When in iChat I can launch other programs with sound and it comes out both speakers. My output in preferences is set to the middle also so it should come out both speakers right?

Hi
Thats normal in iChat as the mic is close to the left hand speaker, its so you dont get feedback going on.
Tony

I use two apple tvs, when useing mulity speakers on computer plus two tvs the audio plays on all but only video on one, i use two apple tvs, when useing mulity speakers on commputer plus two tvs the audio plays on all but only video on one

i use 2 apple 2nd generation tvs, on mulity speakers, computer and 2 tvs have audio but only one has video, why does the video not play on all at the same time

Welcome to the Apple Community.
I'm not entirely sure whether you're asking if it should or why it doesn't. To cover the first point it isn't supposed to, so your set up is working correctly.
As to why not I'm not absolutely sure, it isn't a bandwidth restriction as whilst I can't be certain that all our 6 Apple TVs have all been streaming video at the same time (when initiated from the Apple TV), I believe at least 4 have on occasions. So I imagine it's another technical limitation that I'm not aware of, perhaps it's a synchronisation problem, who knows.

Audio plays for 4 seconds only

If I play a clip on a timeline in Encore DVD, the video plays in the monitor fine but the audio will stop after 4 seconds. This happens each time I start playback. The DVDs that I burn work fine, it is just a problem when working with clips on the timeline.

Depending upon what country that you are in (music can't be re-downloaded in all countries) then try deleting that incomplete track from your iTunes library and redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes : re-downloading.
If you aren't in a country where you can re-download music or if it re-downloads in the same state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that album and click the arrow to the left of it, and then use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

No audio playing on DVD player, only on computer

I just created my first DVD.
The source is a DV camcorder brought into iMovie and imported into iDVD
Everything went fine on my computer, but when i brought it to my DVD player hooked up to my TV there was no sound, just a buzz (yes I checked another DVD which worked fine on the TV). Checking again on my computer, the DVD played (from the DVD) WITH sound. However, for some reason there is no sound when played through the TV DVD player
I am working in an international environment. I thought perhaps the issue is related to that so I tried making the DVD both as NTSC and as PAL with the same results.
( I followed instructions from <http://docs.info.apple.com/article.html?artnum=165256> and <http://docs.info.apple.com/article.html?artnum=50156>)
The DVD player is a Hyundai multizone-multisystem HU-D6240. The TV is multisystem and the DV camcorder is NTSC.
Note that when I exported the movie from iMovie to qt in PAL format I also specified 16 bit stereo audio - however the original DV was recorded on the camcorder with 12 bit audio. - Does this matter?
Under project info in both the NTSC and the PAL version I see the mov files have both audio and video.
Any ideas?!

ive had the same problem with the audio (music) dropping off of my burned dvds and found it to essentially be either one or both of these problems:
1) your Quicktime installation is corrupt. Locate the quicktime plist file and delete it in your Library. Then download the newest Quicktime only installer (currently 7.4.5) and reinstall.
2) If you have Quicktime Pro, export your videos to a standard definition(SD) MP4. I've found that although the .mov files will play correctly, for some reason with all of the video and audio tracks integrated in the MP4 instead of separate, helps to maintain its integrity.
hope this helps!
Also, to help maintain the audio during the movie file (slideshow), I have Quicktime Pro, which allows me to add the music files to the .mov files separately,so after ive exported the keynote presentation to QT, I added the music files, then exported the file to an MP4. Used that MP4 file in iDVD and the audio sticks. The advantage is that you can also control more specifically how the music is played during your presentation, if transitions and timing are important to matching the music precisely.

Left speaker only quit working on 5200

I have the Inspire 5.1 5200 speaker set and there's no longer any sound from the left front output. The problem seems to be the internal system of the subwoofer since I tested the cables, the speakers, and the soundcard. Output directly from the soundcard works fine with headphones.
The problem seems to have started when I loaded Win-XP but I can't imagine how that would have anything to do with it since the output from the soundcard is fine.
Is there anything inside that subwoofer that can be repaired? Does this sound familiar to anyone? Do I have to make a run to the dumpster?

I am having the same problem....exact same speaker quit working. I also get a few popping sounds when my pc comes on and also when trying to play a game. It gets frustrating because when a character in the game talks it pops thru the whole conversation. I thought it was my sound card - Audigy Gamer Card but then I bought this one - Audigy 2 ZS but it is doing the same thing. I hate to go out and buy a whole new set of speakers to verify that is the problem.
My system is:
P4 3.06 Ghtz
024 Meg Ram
2 80 gig Hard Drives
DVD Drive
DVD R/RW Drive
Floppy Drive
Speakers - Creative Inspire 5. 5200
I have built my system April 2004 and the problem started about 3 weeks ago. Will someone from Creatives Tech support actually respond to this?

Stereo audio in left channel only.

Hi,
I have a strange problem with one of my projects.
I have created a large number of "talking head" videos/projects. I export them to FLV using one of PREs default settings. For just one of these projects I get audio in the left channel only. All other clips are OK.
When I play the clips on the timeline the audio is perfect in both channels. So somewhere in the rendering/output process I loose the right channel.
What am I missing here?
Thanks in advance.

Hi and thanks for all input.
Yes I use a mono mic, but the camera puts the sound on both channels.
When I play the timeline I hear the voice in both channels.
The timeline audio track shows waveforms on both channels.
Here is a pic of the timeline:
The project is corrupt somehow. I just tried creating a new project with the same video files and made a short flv out of it and it comes out OK.
I will try to redo this one which leads me to another question which I will post in another thread if not already answered.
Thanks for your input.

Audio Plays on Left Speaker Only?

Similar Messages

Maybe you are looking for