Audio plays too fast in Flash 8 FLV encoded from Quicktime MOV
I'm rendering out from VT4 (Newtek Video Toaster) to a
Quicktime MOV file that is re-encoded in the Flash 8 media encoder.
In the past I've used the 32 bit floating point audio format coming
out of VT4, which worked when playing just a MOV file. But now,
when re-encoding the MOV file in Flash 8, the audio runs fast, or
is maybe truncated somehow so it sounds that way.
I have several choices for a MOV audio format, is there one
that Flash 8 media encoder is 'wanting' to see?
Thanks,
TW
http://www.thehangtime.com/gb/gbfaq2.html#toofast
Similar Messages
-
Streaming audio plays too fast on car stereo
Streaming audio plays too fast on car stereo with iPhone 4S
how do you play it on the car stereo?
because if it's using the 3.5mm headset connector or even the analog out from the pin30 then it's
100% the same sound output from the phone as it provide a headset -
Music/audio plays too fast
using a new laptop (this compaq) and installed itunes. All music/audio, whether from a CD, or itunes or the audio from a website, plays too fast. I've tried lots of things -found a page in the support section (tried all except the driver thing) -- ANY THOUGHTS?? THis is driving me crazy and can't do anything w/ my ipod except listen to what's already on there!
You may want to check your soundcard output in QuickTime. See this post for directions on the process: http://discussions.apple.com/message.jspa;jsessionid=aXxb7IZbMDPmI_4E?messageID=814726&ft=y&#814726
And this Article: iTunes and QuickTime for Windows: Songs and other audio don't play correctly
And before you do any of the above, make sure that you have all the recent Windows Updates from windowsupdate.com. Make sure you have the latest drivers for your particular sound card, and make sure you have the latest DirectX installed. Any of these could also cause this problem without QuickTime being the culprit. -
pulseaudio seems to be playing my sound way too fast
Is there any way to slow it down?nevermind, fixed with the help of someone on the pulseaudio irc channel
fixed by disable multirate locking and decreasing the multitrack internal clock samplerate to 48000
by the way, does anyone know how to change the samplerate of the output stream? -
I seem to have this problem with videos from
finance.yahoo.com when I never had this problem? Anyway to slow it
down? I don't recall ever having this problem and I did a uninstall
reinstall of flash player. works on youtube, etc with no problem
but every videos from finance.yahoo.com is too fast.Does Streamclip allow you to choose between Type 1 and Type 2 DV AVI? If so then you want Type 2 in your conversions.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ -
FLV inserted to page no probs but plays too fast!
I've used the Insert Flash Video feature on dreamweaver 8 to
add a video clip to one of my family web pages
www.nzgreens.me.uk/house
It has up loaded and plays, but is far too fast.
We've moved to New Zealand and it's for our family and
friends in the UK to view. Please please please can someone tell me
why it would be playing too fast?Green Kiwi wrote:
> Could be. I used a piece of free software from
1and1.co.uk (they host my site)
> its called Prism Video Converter. Never used it before
but was very simple. So
> simple that it never even talked about encoding.
>
> I do have flash 8, but I've only had it about a week and
don't really know
> what I'm doing. I know that it can convert video into
FLV format. Do you think
> I should try converting it through Flash 8 instead?
I think you should give it ago, the Flash Encoder is straight
forward
from what I remember.
Steve -
Hi,
Can any one help how to resolve the issue some flvs play too fast but same flvs play normal most of the time. I am using NetStream class to play the flv.
here is play method I am using and link of demo and entire source.
private function play():void
if(btnPP.label == "Play"){
stream.resume();
else
stream.pause();
Please see this link : http://ec202.classicinformatics.com/demo/cropper/
Thanks in advance,
PremGreen Kiwi wrote:
> Could be. I used a piece of free software from
1and1.co.uk (they host my site)
> its called Prism Video Converter. Never used it before
but was very simple. So
> simple that it never even talked about encoding.
>
> I do have flash 8, but I've only had it about a week and
don't really know
> what I'm doing. I know that it can convert video into
FLV format. Do you think
> I should try converting it through Flash 8 instead?
I think you should give it ago, the Flash Encoder is straight
forward
from what I remember.
Steve -
Audio book plays too fast on the ipad - how do i fix it?
audio book plays too fast on the ipad - how do i fix it?
While I don't listen to audiobooks on myh iPad, the following might apply in your case:
When you navigate to the player controls in the iPod app, in older OS's, and perhaps still in the Music app in iOS 5, you will see a variable speed control on the right hand side of the scrubber bar. Sequential taps on that change the speeds.
This does appear in spoken content only, I think, as I see it in podcasts all the time. It's not there for video or music content, so I'd expect it to appear for Audiobooks as well. -
Flash movies too fast with flash 10?
I have a website with some flash movies. they run at 30 FPS.
i recently installed a new version of flash and now my movies run
too fast. not too much fatser but enough to make a difference to my
audience. is this a feature of flash 10? what can i do to make sure
my viewers dont also have this problem??Do you hear anything? Check your audio output. If it is set to hdmi, there's nothing to slow down the video and it plays too fast. Set the audio output to speakers and...voila!
This happened to me today. I had plugged in an external mic that used an A/D dongle (usb output) and it switched my audio output from speakers to hdmi somehow. I could download flash movies as .webv and play them at regular speed with VLC, with no sound. I use Linux Mint 17, but I saw other forum posts where this happened on Windows and Ubuntu. -
How can I fix corrupted audiobooks category--plays too fast and is gravelly?
How can I fix corrupted audiobooks category--plays too fast and is gravelly? Other music categories are unaffected..
On the audio book (and podcast) playing screen there is a playback speed selector. It is the box on the right hand side of the screen right below the scrubber bar. It say either 1/2X, 1X or 2X, the playback speeds. Tap the box to cycle through the playback speeds.
-
Bounced tracks play too fast in iTunes
This is a continuation of an old thread that was never resolved:
http://discussions.apple.com/thread.jspa?threadID=853393
Basically, nothing has changed. I can bounce my tracks from Logic, and they play fine everywhere except iTunes, where they play too fast. I can play them on my iPod in the car and everything works at normal speed.
All my iTunes tracks (including the ones bounced from Logic) share the following characteristics:
192 kbps
44.1 kHz
Profile: Low Complexity
However, the Logic tracks play fast, whereas everything else plays normally.
I have a standard G5 sound card, not a 3rd party one.
I'm about to conclude that this is a standard limitation with Logic, that tracks created there cannot be listened to at regular speed in iTunes. Is that a known issue? Is this limitation by design?Sorry for the slow reply. Yes, that is the problem I'm having, and it's so weird, I thought maybe there was some wacky glitch in the program. Logic is not without its bizarre idiosyncrasies, as you've probably noticed yourself.
Check this out for bizarre: I've bounced these tunes down to my iPod, where I can listen to them over headphones, in my car, etc, with the tracks playing at the right speed. However, if I plug that same ipod into my home stereo in the living room (where the laptop is also plugged in), and play those same tracks, they play too fast. I know, it doesn't make sense. But I'm not imagining it. It's completely crazy.
In Audio Midi Setup my audio output is set for 44.1khz.
Anyhow, the problem is less consistent these days. That is, sometimes I can bounce a track down and it plays right. Othertimes, not. I still haven't found the common denominator to this problem, but if I discover anything, I'll post it here. -
Videos play too fast on ipad - sounds like super high speed mini mouse
We just bought the ipad and when we play videos on vimeo or youtube they play at an ultra high speed like the fps is messed up - it sounds like a record being played too fast
Is this our ipad or a setting - we are worried because we do not see the problem listed anywhere else.
Thanks!Have your rebooted/restarted your iPad? you do that by pressing the Home and power/sleep button at the same time until the slider to power off the iPad appears. Slide the slider and when screen activity stops depress the two buttons again until the Apple logo appears. When the iPad completes rebooting try again to see if that solved your problem.
-
My podcasts play too fast in my iphone
I did not had a problem before but now with the same podcasts I use to listen to they play too fast. You can still understand them but it is not pleasant at all. Does anyone has the same problem and was able to solve it?
It's likely you accidentally touched the button that speeds up playback to 1.5x.
-
Music plays too fast-help!
I have downloaded itunes to my Compaq laptop and all music plays too fast. I don't think it's an itunes problem, i think it's something i need to adjust on the laptop, but I can't figure out what to adjust. Any thoughts?
Hi- thanks for the direction.. unfortunatey, same problem but no answers there on that link that I could see.. Also, i'm not recording my voice but am plugging in MP3 songs. Any other ideas?
-
Microsoft 2000 OS, all videos playing too fast, what to do?
Have MS 2000 Professional OS
All online streaming videos (like youtube) playing too fast, extremely annoying rushing "chipmunk" effect.Word is getting around on the internet that Apple has basically stopped monitoring and moderating these forums. Expect to see this sort of thing increasing. If Apple isn't going to keep a lid on trolling like this then they had better just shut the forums down. It won't take long for these forums to be totally overrun by Mac bashers, trolls, and Windows fanboys. There's something about the Mac that scares them and makes them feel insecure.
Maybe you are looking for
-
Hi Experts, Please help me to solve this two issues I will give you clearly about my client requirement in the current system (existing) already configured for shift allowance. shift allowance for executive Shift Allowance Rates 2 shift 3 shift RM
-
Change theme effects on Nokia N8
I saw many videos on YouTube showing where different and more striking effects that bring Symbian Belle. Even in the video of the new FP2 effects are better. Can those be changed? Belle Symbian Example: http://www.youtube.com/watch?feature=player_emb
-
Hi, I am running Arch for about 1 year, doing upgrades from time to time. It is a graphical mode desktop. I have upgraded week or two ago. Now each time I want to change the resolution of the screen, the screen goes blank with 'unsupported mode' me
-
Incorrect display of half notes?
I wanted to write one half note (o) follwed by three 8th notes and when I connect the half note to the 8ths the center on the half note gets filled and looks like the other notes in duration. I checked the piano role and the actual duration of the ha
-
Suppress Export Option Using Crystal Reports Web Report Viewer (viewrpt.cwr
We have an existing Crystal Report that is being displayed using the Crystal Enterprise Web Viewer (viewrpt.cwr) in a call like this: http://<servername>:8080/CrystalReports/viewrpt.cwr?id=<an id value>etc. When the report is displayed, the toolbar h