Audio plug ins (stillwell audio) appear even after deleted

I had some stillwell audio plug ins, they didnt ned them anymore so i deleted them, did a system search and deleted all the files that have to relate to stillwell plug ins, then went on to ableton and logic(I installed logic after the start of the iusse) and they still appeared and are still fully functional, so I went on searching for these files even deeper and couldent find them, they dont exist when i search them. so i contacted stillwell customer service and they listed how to find the files and i did all what they said and it still shows up, so now im asking the apple community, DO YOU GUYS KNOW WHATS GOING ON!!
thanks, teliik

Hello TELIIK,
It sounds like you just did a search for the plug-ins, but I found an article that tells you exactly where to look for these plug-ins:
Finding Audio Units plug-ins on your computer
http://support.apple.com/kb/HT1295
The important part of this article states:
The Apple Audio Units plug-ins are built into the operating system and do not appear as discrete files. Plug-ins from other manufacturers appear as individual components on your hard disk. They may be found in two places:
/Library/Audio/Plug-Ins/Components
~/Library/Audio/Plug-Ins/Components ("~" represents your home directory.)
The ~/Library is a hidden folder in Lion and Mountain Lion. You can find instructions for accessing it here:
OS X Mountain Lion: What is the Library folder?
http://support.apple.com/kb/PH11395
The Library folder is hidden. If you need to open it, make sure you are in the Finder, hold down the Option key, and then choose Go > Library.
I hope this helps you locate those those plug-ins!
Best,
Sheila M.

Similar Messages

I am unable to clear my recent call list. Both the 'missed' and 'all' numbers appear even after deleting. It was happening on ios 7.0.4 and is present on 7.0.5. Any help.

I am unable to clear my recent call list. Both the 'missed' and 'all' numbers appear even after deleting. It was happening on ios 7.0.4 and is present on 7.0.5. Any help.

No.
You got 2 more basic troubleshooting steps left before you make an appointment with the Apple genius bar for an evaluation:
Restore from backup
Restore as new
http://support.apple.com/kb/HT1414

UPGRADING from TIGER to LEOPARD causes audio plug ins scan WAVES PROBLEMS

I have upgraded my G5 from Tiger to Leopard and am now running 10.5.8. I am using LOGIC PRO 8 and have upgraded that to 8.0.2. When i open LOGIC PRO and it starts to scan the audio plug ins-it causes a problem that sends me to PACE-the Interlok site for my WAVES-it says this:
IMPORTANT!
If you're running Mac OS X 10.5 or above and your software keeps driving you back to this site, even after installing the latest extensions, then you need to update your software, not the extensions. Contact the publisher of the software you're trying to use regarding a 10.5 compatible update. Please don't contact PACE. Only the publisher of your software can resolve this issue.
SO-i downloaded their latest extension and i keep getting brought back to their site. My software IS updated -from 8 to 8.0.2
PLEASE HELP

You provided almost all information except the waves version. Most probably Waves are outdated.

Premiere Pro Freezing on "Scanning Audio Plug-ins"

Hi All,
Adobe Premiere Pro freezes as I wait for "Scanning Audio Plug-Ins." The program "dvaaudiovideoscan" program has opened, but nothing is happening.
-I have uninstalled and reinstalled.
-Deleted my "8.0" user folder in documents.
My iMac has run and has enough power to run Premiere Pro past and present.
I don't know what to do. I also appreciate that Adobe has no number that I can call even though I'm paying for this service.
Please help community!
Peter

Resolved. Called 1-877-722-7088.

Please help with nested audio plug-ins

I have built three sequences with audio mixer settings for each (compression, EQ, etc...). I nest these individually and want to organize them in a "final output" sequence. As the three sequences are placed in the "final output" sequence, all video clip references work fine, but the audio mixer settings do not follow the audio clips to the "final output" audio.
How can I get the individual sequence audio plug-ins to follow the audio to the final output audio?
I have rendered work area, rendered audio, and linked audio to video clips, still I am missing something...
thanks for your help!!!
Paul

these sequences as built
sequence A : Audio 1 (compression at 10)
sequence B : Audio 2 (compression at 15)
when nested, should become:
Master sequence: {Nested sequence A : Audio 1 (compression at 10)} , {Nested sequence B : Audio 2 (compression at 15)} .
but the compression settings do not come through at all.
Ideally, I would be able to use the audio settings from individual sequences as built, then the program would feed them (as built) to a master output just like the video clips...but for some reason voiceover compression from sequence A (which is different from sequence B) is not applying to the output of the master sequence at all...
as it exsists now, I would have to rebuild all of my audio on the master sequence because any audio mixer changes are not carrying through...
I must be missing something...
thanks,
Paul

Compressor Audio plug-ins (can you add third party audio plug-ins?)

Compressor Audio plug-ins
Can you add third party audio plug-ins? Just need a simple audio compressing/mastering solution for a lot of non-technically minded producers. So trying to avoid using soundtrack.
cheers
steve

Hi B
Really sure You are looking into Your "user" folder ?
In this there is a folder with in my case "my account" eg "Bengt"
in this ther IS a library folder
and in this ther should be an iMovie folder. If not I would make one
and into this put a folder "Plug-ins" and in this put Your plug-ins.
Restart Your Mac and open iMovie and see if it found the new plug-ins.
Yours Bengt W

How to fix permissions in /Library/Audio/Plug-ins in Lion

I noticed that very annoyingly, Lion comes with the following default permissions for /Library/Audio/Plug-ins:
drwxr-xr-x 9 root wheel 306 Oct 7 07:37 Plug-Ins
That means that you the user cannot drag a plug-in in and out as you wish. What a pain in the butt!
Simple fix:
sudo chown -R myusername:wheel /Library/Audio/Plug-Ins
sudo chmod -R 775 /Library/Audio/Plug-Ins
Now it's like it should be: you own your own darn folder!
Does anyone have a better way to do this? Like would you recommend just doing the chmod without the chown? Just curious. Also, I wonder why Apple made this curious modification to the system in Lion... it feels like they're increasing the level of restriction upon the owner of the computer from being able to use it themselves.

1.Click on finder
2. Look for GO menu at the top of the screen
3. Click on it and select go to folder option
4. Paste or type /Library/Audio/Plug-Ins/Components there
5. Navigate to this folder
6. Copy and paste the component to that folder. It should ask if you want to replace the original file(files). Click on yes
Hope this will help

Audio Plug-Ins Won't Let FCP Open

Does anybody know how to disable audio plug-ins within FCP? I have a Waves bundle for use with Pro Tools on the same computer. The Waves plugs are authorized with an iLok. If that iLok isn't present, FCP closes during launch because it can't open the waves plugs.

Nick Holmes wrote:
Move the plugs out of the FCP Plugins folder.
It's really that simple.
Sorry to resurrect this thread, but its really *not that simple*.
You see FCP will load 3rd party AU's that are in a shared folder - Library -> Audio -> Plug-Ins -> Components. If I want the AU's to show up in Soundtrack for example they have to be in that folder, but then FCP will load them as well.
I have a Powercore that I don't want to use in FCP, but want to use in Soundtrack. It causes FCP's load time to triple and it's really annoying. I've found no trace of a plug-ins folder that is just for soundtrack either.
I suppose that AudioUnit Manager will do the trick but I really did not want to install yet another app to sort this out but that seems to be the only option at this time.

Finding Library/Audio/Plug-Ins/Components folder???

I am having the hardest time finding this folder...can someone please guide me in the right direction?
I tried using the Finder and Spotlight but to no avail.
Thanks!!

You may want to go to two different folders:
/Library/Audio/Plug-Ins/Components
~/Library/Audio/Plug-Ins/Components (~ is your user folder)
To go to that folder, just open a Finder window, select the Go menu (on the menu bar) > Go to Folder, and type /Library/Audio/Plug-Ins/Components or ~/Library/Audio/Plug-Ins/Components, and you will go to the folder

Can Waves audio plug-ins be used with Premiere Pro CC?

Hi folks,
As it says in the thread title, can Waves audio plug-ins be used with Premiere Pro CC?
Cheers!

I dont think so:
http://www.adobe.com/products/premiere/extend.displayTab4.html
http://www.waves.com/support/tech-specs/supported-hosts

No audio plug ins?

I'm Googling, but I can't seem to find anything about plug ins for audio in FCPX. Do they not exist? Like if I want to add echo, or make a voice sound like it's coming out of a telephone. That kind of stuff. I think this was available for FCP 7.

Great video here by Micael Wohl on the Plugins, including the Logic Pro plugins.

Audio Plug-ins for CS6.0.3 Premier Pro

I am an audio editing novice. I am interested in using the equilizer audio effect to lower some high pitched sounds and enhance some middle frequency sounds. The equilizer effect does not seem to have a tight enough bandwith for my edits. The edits overlap. Does anyone know if the Waves Q10 Native plug-in will work in PremPro. Any information is appreciated. thank you Jean

Hi Hangtime,
Thanks for the reply (I had looked on bulletsandbones,and couldn't find the link, so thankyou).
However, the 'Computer Music' magazine that I have got some plug ins from says that most of the "programs are presented as installers. You just double-click on the installer icon and the application does the rest".
Does this mean that one uses the installer first, and then follows the bulletsandbones advice (which is "Drop the Audio Units (AU) Plug-In into your Library/Audio/Plug-Ins/Components/ folder on your Mac (this is at the Root level of your hard drive)?"
Message was edited by: drutgat

Disable audio plug-ins when starting FinalCut

Because I use Logic Pro I have a lot of AU plug ins, FX and instruments... and FinalCut crash while open because it doesn't recognize some plug-ins. How can I disaeble the audio plug ins when lauching? Danks for your help

Remove all of your audio filters from their folder, and replace them one by one. Launch FCP again and again adding one each time until you find the culprit.
They can be found in Mac HD/Library/Audio/Plug-Ins/Components, and i think also User>Library>Audio>Plugins folder.
Just move them to a separate folder o your desktop util you figure out which one is troublesome.
Good luck,
Joni

Audio plug ins

when I plug in headphones or speakers the sound continues from the computer

Nick Holmes wrote:
Move the plugs out of the FCP Plugins folder.
It's really that simple.
Sorry to resurrect this thread, but its really *not that simple*.
You see FCP will load 3rd party AU's that are in a shared folder - Library -> Audio -> Plug-Ins -> Components. If I want the AU's to show up in Soundtrack for example they have to be in that folder, but then FCP will load them as well.
I have a Powercore that I don't want to use in FCP, but want to use in Soundtrack. It causes FCP's load time to triple and it's really annoying. I've found no trace of a plug-ins folder that is just for soundtrack either.
I suppose that AudioUnit Manager will do the trick but I really did not want to install yet another app to sort this out but that seems to be the only option at this time.

I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen. Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after making room for the new A

I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen. Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after making room for the new APp. It can be opened, but I want the APP to be on her iPhone screen as well as on mine. Help, please.

Is the app downloaded on her phone also?

Audio plug ins (stillwell audio) appear even after deleted

Similar Messages

Maybe you are looking for