Audio Plugins - Waves Diamond Bundle - w/FCP?

I have just installed the WAVES Diamond Bundle in hopes of using it to clean up Audio in FCP. After install, I do NOT see them anywhere in FCP.
-Should FCP recognize Waves plugins?
-Should SoundTrack Pro?

Lamont,
Sorry for the delay...I've been out of the country the last week.
My recollection is that the Waves Shell should match the plug version. For instance, v4 should be WavesShell_4...v5 plugs should be WavesShell_5. I don't have the latest...but I assume it is the same. There is also a variant to it related to the bundling. For instance, the Vocal Bundle requires the VocalWaveShellx.
All of these should coordinate, and can cause some problems if not. If you own version X...I believe you should be able to download the cooresponding package that will contain the Authorizers. From the cooresponding authorizer (Waves Authorizer 5 or Waves Vocal Authroizer, etc.) you should be able to install...this was regardless of your WUP status. WUP status used to relate to calling in for Tech Support or getting a discount when upgrading.
With all of that said...I do know they have changed their WUP policies in the last year. It would be very discouraging to me if they discontinue former product downloads based on that! Sorry I don't have more information. I'll look around.
I don't believe the 5.0.1 will break your iLok for v4 plugs... But to my knowledge, the version 5 waveshell only supports v5 plugs and will therefore not be of any use to you.
My recommendation would be to get the latest download package from the waves site (if possible) that corresponds to the package you own. This should not require additional iLok authorizing...but will update any plugs and the shell to their latest versions.
If you own v5 and v4... check your iLok to see if you have the v5 license either downloaded or installed, download the v5 Diamond package from waves. Archive all your current stuff...and then delete the relating v4 shells and plugs. Reinstall the v5 waveshell. You should be done.
If you don't see it in your iLok...I would contact waves support (thier support telephone number is listed on thier website). Tell them you have a licensing issues, I believe licensing issues are excluded from support aggreement. Once they help you get the license to your iLok...then follow the above steps.
Sorry for the rambling...hope that helps.

Similar Messages

Installing Waves Diamond bundle - into Logic Pro 8

Help! i have logic pro 8 installed and have just gotten Waves plug-in. I have installed the Waves in the Applications folder, but cant seem to see where they are in Logic Pro 8 or if they are installed at all in logic??
Any help appreciated!

There should be a Waveshell component in the *Library>Audio>Plug Ins>Components* folder.
But Waves comes with an installer, so everything should be where it should be. I jus installed 6.0.5 to try, and Logic finds over 94 new plugins. Maybe you should install again.
What version is it?

Logic 7.1 + waves diamond disaster

i bought the waves diamond bundle some time ago and installed it today. ever since, logic has not loaded properly. it stops when it gets to "checking midi drivers". if i get lucky, and logic opens, logic won't quit properly. i tried uninstalling waves but logic still has the plugs in the audio units dropdown on the channel strip. does anyone know how i can delete EVERYTHING waves has installed on my machine. or, how can i install waves properly to work with my setup? tech support for waves won't be open until monday and i have sessions lined up. can't believe it!!! any help would be greatly appreciated.

I'm no expert on this but when I have wanted to remove plugins I type a few variations of the plugin's file name into spotlight and it normally brings up all the files and their location.
I then just delete the items from the provided location.

Waves bundle in audio plugin list?

Hi,
I don't see my waves bundle in the audio plugin list in fcpx?
In Pro Tools I see it and it is working.
I do see my psp vintagewarmer plugin and my izotope plugin.

They have to be AU format, and installed for Logic. FCP X reads from Logic, is not a DAW so it won't read all audio plugins. But, you can get Automatic Duck for free, and export and OMF to go to ProTools or SoundTrack Pro or Logic.

Fcp wont load cause of audio plugins

Hi. I work on Fcp studio and Logic pro. I have a lot of audio plugins for Logic espescially waves. But now fcp wont load cause it crashes when it gets to a certain plugin. I don't want to use audio plugins in fcp as I do my audio in logic.
Why has fcp seen my logic plugins and how can I stop this, I can't run fcp. I've tried dragging the components folder out but no luck. There must be a resolution to this, it's driving me nuts.
Many thanks
Antony.

I've had the same problem.
FCS maintenance pack is not really an option - it disables the plugins globally, so Logic wont load them. It's also expensive (for what it does) - $169.
The easiest workaround I found is to shift the plugins (located in the /Library/Audio/Plug-Ins/Components/ folder) to - for example - another folder (not called 'components') on the desktop, before launching FCP. Then you can move them back before launching Logic. A pain, yes, but until Apple fixes their problem...waiting.
None of the plugins in this folder are core to FCP (if you're like me they'll be all Logic plugins), so there are no consequences to FCP. You could probably keep some in the folder, as I think the problem has got to do with the number of plugins (a different plugin crashes FCP every time for me).
Cheers,
Dan

Don't wanna load audio plugin in FCP

I don't wanna load audio plugin in FCP 5 (audio plugin from Protools and Logic that sharing plugin)
Who know how to unload that third party audio plugin ?
Thank you for every answer.

Version is FCP-X 10.1 with OSX 10.7.2
I use the Ctl-Shift-S to detach the audio from the video, then I can create a single audio-only storyline for the whole project (grouping and using Cmd-G) and add transitions etc to it. It is sometimes difficult to get it to work because the usual "snap" function which works well for video doesn't always work accurately enough for audio (much shorter "frames") so you sometimes get a few samples overlap, a few samples gap between clips or a few samples of a spurious audio clip between clips which are invisible except at sample zoom - and the transition complains of "not enough media". I have had to learn various tricks to get this sorted out!
However, before I go any further - I have found the problem. If I replace the clips in the audio storyline from the original media then the transition works properly. It's something to do with what I was doing to the clips before I broke them apart.
Before I learnt this "separate audio storyline" procedure I was detaching every other audio clip, creating overlaps and using the fade handles. The projects where I used this technique originally, then converted to the "audio-only" storyline are the ones having the trouble. If I start from the raw audio/video storyline, detach the audio and make the separate "audio-only" storyline directly then the transitions work perfectly as they should. If I have previously fiddled with the fade handles, overlaps etc then some of the transitions don't work in the new storyline!

Third party Audio plugins don't work here

I'm wondering if someone is able to use third party Audio plugins (like Waves, Sonnox, Sonalksis, etc.) in FCPX. I can't. I have them for Logic and I can see them in FCPX, but if I try to use them I encounter various issues (settings not saved, FCPX crashes, and so on...).
Only Logic plugs work fine

There are NUMEROUS of issues with third pty AU's in FCPx. I have reported many of them. Settings not getting stored, crashes etc etc etc...
Plugs that work perfectly in Logic Pro....
AU integration in FCPx is highly erratic. Unfortunately.
You also wanna be VERY careful when using .CAF files in FCPx which have more than two channels of audio. Distortion etc... are bound to happen unless you take appropriate measures and disable channels not pertaining to stereo.

DVCPROHD Audio Plugin Failure

I couldn't find a place where this really fit—it's an audio plugin question, but I don't use the Pro Software—so I put it in the general OSX category; feel free to move it.
My issue is with the DVC PRO HD Audio plugin (/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin). I am using a simple afplay command to try and add sounds on startup/login, but I note the following error when using the command through terminal:
afplay[18548:903] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
2010-08-10 21:08:07.249 afplay[18548:903] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x10020d3a0 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)
For some reason the audio plug in is not loading correctly, and i can't figure out why. To my knowledge I have never messed with the audio plugins on my computer. Kicker: the command worked the first time I used it, but has failed in subsequent uses. Not sure if restart fixes the issue. Any ideas?
-Kai

I have this problem happening on a fresh OS X 10.6.5 Install + Logic Studio 9. The console log is filling up with it like crazy. I guess I will remove it from the system for now, but I sure would like to know what it is and what affects the removal of it may have.
I get the same errors as everyone else, and my plug shows as Universal with a version number of 1.3.2.
System Preferences[713] Error loading /Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: dlopen(/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHD Audio, 262): no suitable image found. Did find:
/Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin/Contents/MacOS/DVCPROHDAudio: no matching architecture in universal wrapper
System Preferences[713] Cannot find function pointer NewPlugIn for factory C5A4CE5B-0BB8-11D8-9D75-0003939615B6 in CFBundle/CFPlugIn 0x2000fb200 </Library/Audio/Plug-Ins/HAL/DVCPROHDAudio.plugin> (bundle, not loaded)

Missing Audio Plugins

Just completed first project since updating to 10.0.8 - which was not without it's problems, invovling much deleting of preferences to cure the "restoring windows" hang... Anyway - made a compound clip of the final for export and went to grab an audio limiter to push the levels up a little only to find I had no audio plugins anymore - or so I thought. After much frustration and back and forth with safe boots and more preference deleting I discovered that I did in fact still have all my audio plugins - BUT - all of the catagories that used to display them on the left hand side of the effects browser are now missing; INCLUDING the main catagory labelled "AUDIO" - so it looks like there are no audio plugins available at all.. but actually, if you select "ALL" from the VIDEO list and then scroll down past the video plugins you get the the audio plugins... :-O
So I'm posting here for 2 reasons - firstly in case anyone else experiences the sense of panic I did when I thought I was going to have to export the audio to process outside and re-import (hours before delivery) and secondly because I would love to know "Where have all the audio catagories gone?"
I have Waves Mecury, UAD and many, many other plugins installed (594 in total) - so working my way quickly through the list to find what I want is now a complete pain.
Anyone have any ideas? Or is that just "progress'...?

I have Waves Mecury, UAD and many, many other plugins installed (594 in total) - so working my way quickly through the list to find what I want is now a complete pain.
Anyone have any ideas? Or is that just "progress'...?
No, this must merely a glitch that may probably be fixed by one of the standard troubleshooting techniques:
1) trash preferences (which you probably tried already)
2) revert to original layout
3) delete the layouts folder inside ~/Library/Application Support/Final Cut Pro

Audio plugins

I am using FCP 5.1.1 and I would like to add additional audio plugins, can anyone suggest any?

I'm not kidding with soundtrack... supports all the VST plugins (or a bunch of them).
FCP won't -- it's not an audio editor.
CaptM

Imovie wont open because of razer audio plugin

Since the newest imovie updated I cannot open it. I Get an error that says quite unexpectedly because of the Razer Audio plugin. The only Razer software I have is for my mouse. As far as im aware it has nothing to do with Audio, and I movie worked fine with it before the update. Any fix ideas other than uninstalling my mouse?

/Library/Audio/Plug-Ins/HAL/RazerAudio.plugin/Contents/MacOS/RazerAudio
Remove the plug-in.

How can I get the rest of my third party audio plugins (UAD & Altiverb) to show up in FCPX

Hello Everyone,
In FCPX'as audio effects I can see the Logic (included with FCPX) plugins, as well as my own Celemony (Melodyne) & PSP Audioware plugins. However, my UAD plugins and Altiverb are not there. How do I get FCPX to see my other audio plugins that are also currently on my machine?
Any help appreciated, thank you.
~Shea A.J. Comfort

err = -50 when downloading from store - https://discussions.apple.com/thread/3697501 - delete incomplete downloads from downloads folder as per http://support.apple.com/kb/TS3297
iTunes Store: "Error (-50)" when downloading purchased content - http://support.apple.com/kb/TS1583

Premiere CC hangs on startup ' scanning audio plugins'

Having trouble with Premiere CC on a Mac. Installed and re-installed several times, deleting everything I could find.
Everything installed fine - but when I startup Premiere, it hangs on the 'scanning audio plugins'
Does anyone have the same experience and if so, is there a simple solution?
Thank you.

Hi,
Please move all Items from the below mention folder location and empty the Folder
Main Hard drive->Library->Application Support->Adobe->Common->Plugin->7.0->Media Core
Once the Media Core folder is Empty then try to launch .
Also empty the Quick time folder from the below mention location
Main Hard drive->Library->Quick time
Move all components from the Quick time folder and empty the folder and then try to launch , it might fix the problem for you as it seems some plugins are causing the issue.
regards
Karandeep singh

Third Party VST audio plugins - stereo, multichannel

Hello,
I am developing VST audio plugins. I have the trial version of Adobe Audition CS5 on Mac OSX and as I started to realize this version of Audition doesn't support 64-bit VST plugins, is this correct? or is there something I should do for Audition to scan and load my 64-bit plugin?
Another question I have is well I just made a 32-bit version of my plugin for Audition to find it and it works fine when its a stereo 2 input 2 output plugin.
But I have a plugin that is 2 input 4 output and although making it 32-bits Audition will scan and find it, It will always be disabled in the plugin list and I can't find a way to enable the plugin.
I would like to know if its possible to have a plugin that has more than 2 outputs and what do I have to do to enable it since the standard way won't do it (although the plugin is found). And also what is the deal with 64 bit plugins and Audition CS5.
Any information would be highly appreciated!
Thanks you very much.
Sergio.

sergexte wrote:
Hello,
I am developing VST audio plugins. I have the trial version of Adobe Audition CS5 on Mac OSX and as I started to realize this version of Audition doesn't support 64-bit VST plugins, is this correct? or is there something I should do for Audition to scan and load my 64-bit plugin?
This release of Audition is 32-bit only and thus only supports 32-bit VST plug-ins. You may wish to try your 64-bit VST in Premiere Pro as it is a 64-bit app that also supports third-party VSTs
sergexte wrote:
I would like to know if its possible to have a plugin that has more than 2 outputs and what do I have to do to enable it since the standard way won't do it (although the plugin is found). And also what is the deal with 64 bit plugins and Audition CS5.
You can have plug-ins with more than 2 outputs, however, we don't support plug-ins with asymmetrical channel configurations. There's a lot of details that need to be attended to in order to get that to be bulletproof. So if you had something that was 6 in and 6 out, that should be possible in this version of Audition.

Audio Plugin for iTunes????

Since Volume Logic doesn't work anymore, and they don't seem to be in a hurry to fix it, does anybody know of any other good audio plugins for iTunes on Windows, please.
Help much appreciated

Perhaps SRS iWOW would be worth looking at.
Thanks so much for the help! I trialed the software and bought it after the third song! I'm very happy with it so far. Thanks again for the suggestion!

Audio Plugins - Waves Diamond Bundle - w/FCP?

Similar Messages

Maybe you are looking for