Audio preview no longer works correctly since AE-CC update

Hi everyone.
Since updating AE CC a couple of days ago (now on 12.1.0.168) on OSX 10.8.5, 2.7GHz i7 16GB RAM, the audio and RAM preview no longer functions correctly.
The steps I follow are:
Open AE
Open project
Press . to preview audio from where I am on the timeline, OR RAM preview workspace
What happens is my cursor turns into the wheel of doom for a about 20 seconds, then the playback begins but the audio is sped up which is wrong. Video is correct speed.
If I stop the audio or RAM preview, then preview again, everything is fine and plays instantly. If a RAM preview loops, then the audio reverts to normal speed.
I can open up any and all of my different project files and audio previews perfectly and instantly as it should. It's just the first time I press the . key on a freshly opened instance of AE that I get this problem.
I've tried restarting my mac to no avail, and also changing the pref settings away from what the settings have always been and that doesn't work either. I've even trashed my prefs and that also doesn't work.
I work exclusively at 25fps. Frame rate for RAM preview is set to auto (25) and changing this from auto to 25 doesn't work.
Memory settings are default since trashing my prefs, 16GB installed, 4GB for other apps, no checked boxes are ticked.
Any ideas on what has happened please?

Thanks for letting us know, however, this is a user to user forum and not an "Apple Run" forum.
You need to report to Apple via:
http://www.apple.com/feedback/

Similar Messages

HT1665 Why does my ihome no longer work properly since my iPod update

My ihome no longer works properly since I updated my iPod to the most current software update. Is there a fix?

Sometimes thisworks:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
However,sometimes an iOS update breaks compatibility and you have to wait for either an iOS update or and update to the iHome firmware. Go to iHome's support site

Java no longer working properly since last firefox update

Since the latest firefox update, Java no longer works as it should on my banking website. The authorisation procedure uses Java, but the box freezes and does not finish loading. It still works fine on IE. I use Windows 7.

Mozilla are aware of the issue in Firefox 3.6.14 with some Java applets not working and are working on a fix, no timescale but they are planning on a quick release.

File Associations: Preview no longer working correctly

Over the past week or so, Preview has been misbehaving for me.
If I double-click on a file that's supposed to be opened with Preview by default (.jpg, .pdf files, e.g.) it says "unexpected error occurred." If I then right-click on the file and select Open With and select Preview, it says "You cannot open the application 'Preview' because it is in the
Trash."
Which is utter hogwash, because Preview is NOT in the trash, it's right where it's supposed to be in the Applications folder. Launching Preview from there and then opening the target file works fine, but doesn't solve
the original problem.
So there's a file association problem, but try as I might, I cannot figure out how to correct this. A reboot did not help.
Based on the fact that the default for opening files is "Preview (3.0.7)" and then further on down the menu there's also "Preview (3.0.9)", methinks that there's still some part of the OS that thinks the old version should be used but cannot find it. Try as I might, nothing's correcting the problem.
Another way I tried to fix the problem was this: used the Finder to select one of the document types I am trying to open (pdf, etc.). Right clicked on that document and chose 'Get Info'. Under the 'Open With' section went through the motions of explicitly choosing Applications\Preview again (then hit the 'Change All...' button).
File permissions have been repaired, the plists for Preview have been deleted - I can't think of anything else to try.
17" Macbook Pro (2.33 GHz, 2 GB RAM, 160 GB) Mac OS X (10.4.8)

Empty the trash, restart, and reset the LaunchServices database as described in http://www.thexlab.com/faqs/resetlaunchservices.html

ITunes 10.1 - Shuffle function no longer works correctly

The shuffle function on playlists no longer works correctly since the most recent iTunes update.
It will periodically stop playing without playing the entire playlist. It is a real hassle and kills the mood as you have to go back to the Mac and click play again. Please fix this issue as it is a very basic function.

Thanks for letting us know, however, this is a user to user forum and not an "Apple Run" forum.
You need to report to Apple via:
http://www.apple.com/feedback/

When I did 7.1 update on iPhone five my reminders no longer works correctly it automatically erases the time and date that I requested

Can somebody tell me why my reminders no longer work correctly on 7.1 update on iPhone five every time I post a reminder it would delete the time and date of the reminder and my reminders do not go off.

Remove Office 2008 for Mac using Microsoft deinstall procedure. Reinstall Office 2008 for Mac. If there are updates, apply them. Using Disk Utility, verify/repair permissions on your boot drive.
Does Office for Mac 2008 now work correctly? If not, you may want to repeat the above first sentence, and then update to Office for Mac 2011, and apply the latest (14.4.8) update which has Yosemite fixes.

HT6114 my audio midi setup is not working correctly since the install of maverick os

my audio midi setup is not working correctly since the install of maverick os

The upgrade may have reset to default settings ..
Check System Preferences > Sounds > Output
Make sure the correct device is selected and the Mute box is not checked.

Filter list no longer works correctly in 4.6

I have been using the classic filter function for array collections since 4.0. With the recent 4.6 update my filter no longer works correctly.
Example of classic realtime filter:
http://experiments.mrinalwadhwa.com/FilterFunctions/srcview/index.html
While the filter works and updates the list just like it used to, the underlying arraycollection doesn't get updated.
For example:
Pretend I have the following AC
testData = new ArrayCollection([
                        {name:"Item 1", price:18},
                        {name:"Item 2", price:50},
                        {name:"Item 3", price:77},
                        {name:"Item 4", price:52},
                        {name:"Item 5", price:43},
                        {name:"Item 6", price:97},
                        {name:"Item 7", price:56},
                        {name:"Item 8", price:81},
                        {name:"Item 9", price:63},
                        {name:"Item 10", price:29},
                        {name:"Item 11", price:84},
                        {name:"Item 12", price:31},
                        {name:"Item 13", price:78},
                        {name:"Item 14", price:48},
                        {name:"Item 15", price:23},
1. I start typing 9 in a textbox to filter the list
2. list filters down to what I want
3. I click on the item in the list which fires off the IndexChangeEvent
4. changeHandler is called
protected function changeHandler(event:IndexChangeEvent):void
       filterTxt.text = "";
       this.saveScrollPosition();
       var selfact:Object = event.currentTarget.selectedIndex;
     // This should yield 8, however because testdata current view only has one item in the list the event.newIndex is acutally 0 where it should be 8
     // So I would need a way to get to the "current view"
So its like there are two lists.
1. filteredlist (auto generated)
2. list with mydata before filter.
The IndexChangeEvent is giving me the selectedindex of the filtered list (item 0) but resolving item 0 with the unfiltered list and the data does not match up.
Now I can no longer get the correct name of the list after applying the fiilter.
Is this a bug that was introduced in Flex 4.6?

galleherjazz, a little research would tell you a lot. Palm sold the rights to Palm Desktop years ago to a company called "Access" from Japan. It was their responsibility to come up with a version of Palm Desktop that works with Vista. They produced one version, then updated it to 6.2.2 to fix some bugs. After that, they abandoned the project! Palm Inc. moved on to a wholly new operating system (webOS).
"Palm programmers" had nothing to do with the decisions made. Access' version came with no color categorization. Pleas for improvements and bug fixes have fallen on deaf ears.
Palm Inc. appears to have no interest in supporting Windows 7 with their legacy (read: discontinued) devices. Any hope for 64-bit USB compatibility appears to be gone.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

[SOLVED] Default audio device no longer works after reboot

After today's reboot, the audio device no longer works. E.g., VLC says:
Audio output failed:
The audio device "default" could not be used:
No such file or directory.
This is the console log:
[0x1394138] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
[0x7fac180069c8] pulse audio output error: PulseAudio server connection failure: Connection refused
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
[0x7fac180069c8] alsa audio output error: cannot open ALSA device "default": No such file or directory
[0x7fac180069c8] jack audio output error: failed to connect to JACK server
[0x7fac180069c8] oss audio output error: cannot open audio device (/dev/dsp)
[0x7fac180069c8] main audio output error: no suitable audio output module
[0x7fac40fa4db8] main decoder error: failed to create audio output
[0x7fac180069c8] pulse audio output error: PulseAudio server connection failure: Connection refused
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
[0x7fac180069c8] alsa audio output error: cannot open ALSA device "default": No such file or directory
[0x7fac180069c8] jack audio output error: failed to connect to JACK server
[0x7fac180069c8] oss audio output error: cannot open audio device (/dev/dsp)
[0x7fac180069c8] main audio output error: no suitable audio output module
[0x7fac41055118] main decoder error: failed to create audio output
The strange thing is that the sound card does in fact work; e.g. the sound test for "HDA Intel PCH", the first entry in my KDE Audio Settings, works. But the entry "default" does not and I suppose that is also the device that VLC is complaining about.
I've tried blacklisting the HDMI driver and switched to the other audio output modules in VLC. I've also checked I'm still member of the "audio" group.
Edit:
P.S. Solved this myself. I had a USB-to-MIDI adapter cable plugged in during boot, which seems to have been causing these problems. I suppose systemd thought it was a USB sound card? I was wondering why dmesg said something about USB sound when the computer doesn't have any USB sound devices. Hardware detection epic fail. Although I guess the cable counts as a MIDI device at least, so in a way it's correct.
So it looks like I'll always have to unplug the MIDI cable before rebooting.
Last edited by Morn (2012-11-23 19:24:00)

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

Finding text in a PDF using preview has stopped working (correctly)

Finding text in a PDF using preview has stopped working (correctly).
When I search for certain words in a PDF using preview, it correctly finds all the pages in the document with that word. However, it no longer highlights the word being searched for. I have looked through the various settings and cannot figure out how to turn this back on.
Thanks.

4Shared worked, but having to register to retrieve files from there is a nuisance.
The problem is that you use special graphic state operators inside text objects which is not allowed:
BT
/printmatic_F1 58.133398014634 Tf
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 86.448306387737 264.65046258267 cm
(t) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 102.60939103581 264.65046258267 cm
(e) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 134.93156033194 264.65046258267 cm
(x) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 163.99825933926 264.65046258267 cm
(t) Tj
Q
ET
Have a look at the PDF specification ISO 32000-1:2008 (e.g. at http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/PDF32000_2008.pdf). Table 51 shows that q, Q, and cm are special graphics state operators, and Figure 9 illustrates that these operators, therefore, are not allowed in text objects, i.e. between BT and ET.

Preview no longer works with pdf documents

I had downloaded Adobe Acrobat Reader to solve one problem. It didn't work and I didn't like it. I liked using Preview much more and so I uninstalled it. However, after I uninstalled it, Preview no longer works to open pdf documents on the Internet. Is there anything I can do. I don't really want Adobe's Reader back because in my opinion it is an inferior product. Is there anyway just to reinstall something so that Preview works as before?
PowerBook G4 Mac OS X (10.4.6)

Hi, Stanley.
I presume you're using Safari as your Web browser and that this question pertains solely to opening PDFs via links in Web pages you are viewing in Safari.
If so:
1. Quit (Command-Q) Safari if it is open.
2. Open the Macintosh HD > Library > Internet Plug-Ins folder.
3. If you find the file AdobePDFViewer.plugin therein, Trash it, then empty the Trash. If prompted to authenticate, provide your Admin password.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

Facebook app no longer works correctly on my iPad. If a you tube video is on fb the safari loads it automatically, Facebook app no longer works correctly on my iPad. If a you tube video is on fb the safari loads it automatically

Facebook no longer works correctly on my iPad. If a post has a video attached, safari automatically brings up the video. I have deleted the app facebook and re-added. Still having the issue.

It appears to be a bug with (I assume) Facebook's servers - other people are having the same problem, me included, with the app switching into YouTube in Safari and showing the last video that was posted on the wall. Until Facebook (if it is their bug) fix it, then there is not much that you can do, apart from possibly accessing Facebook via Safari on your iPad and/or on your computer instead. The problem has also been reported on Facebook's help site as well - it may be related to their new 'timeline' feature or the new iPad that they are rumoured to be announcing soon

My text notification light no longer works now since the Lollipop upgrade. How do I get it back since i use my phone in silent mode most of the time?

My text notification light no longer works now since the Lollipop upgrade. How do I get it back since i use my phone in silent mode most of the time?

We want you to love your software update pitbullmommy71! When did you update your phone? Have you tried going into phone settings and set up your notifications as you would like them? It can take a few days for your phone to normalize after the update, but this may be a bit much. Some apps may no longer be compatible with the new software so you can try running phone in Safe Mode or do a Hard Reset to see if this improves your phone. I've seen where some have completed a Hard Reset after the update and downloaded all same apps, and phone works flawlessly now. However, if you'd like to try Safe Mode first, (which is where all 3rd party apps are disabled), you can certainly try this for 24 hours to see if improves.
Safe Mode: http://vz.to/1i0XGEW
Hard Reset: http://vz.to/1GrhWqy
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

MM Director w/QuickTime 7 no longer works correctly

I updated my PC to QT 7.0.3 and now I have a number of MM Director apps which no longer work correctly. These apps have worked for over 5 years with QT3 - QT6, but not now.
The straingt QT movies play okay, but the MM Dir apps no longer seem to be able to control the QTVR movies, e.g. spin, zoom, etc.
Anyone else seen this?
Thanks.

Apparently, this is a known issue (with QuickTime VR hotspots etc) at Adobe / Macromedia. It was noted in November 2005.
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=ab3642d3&pss=rssdirectorab3642d3
http://www.macromedia.com/cfusion/webforums/forum/messageview.cfm?catid=187&thre adid=1083847
Does ANYONE know if Apple is aware of this issue?
This is a disaster for one of our main products !

After installing the Maverick upgrade my Apple Mail search and flags no longer work correctly?

after installing the Maverick upgrade my Apple Mail search and flags no longer work correctly? I've already rebuilt the mailboxes with no change in the problem. What else can I do???

Hi as2020,
If you are having issues with Mail in Mavericks, you may want to make sure you have updated to the most recent release. You may find the following article helpful:
OS X: About Mail Update for Mavericks
http://support.apple.com/kb/HT6030
Regards,
- Brenden

Audio preview no longer works correctly since AE-CC update

Similar Messages

Maybe you are looking for