Audio problem going from Premiere 6.0 to Premiere Pro

When I go from Premiere 6.0 to Premiere Pro the audio is messed up. I figured how to make the audio okay at one point ... something to do with 48k, importing or exporting. But I forget what I did. Does anyone know that specific routine?

Hi
Both machines have V7 of Quicktime Pro on them.
Thanks

Similar Messages

  • Audio problem going from 5.0 to 4.5

    I have captured a project on one computer with FCP 5 and the audio works fine, when I transfer the files to another computer with FCP 4.5 the audio does not play. Is there a codec problem do you think? The audio plays in quicktime player on the same computer that has FCP 4.5.
    Any hints greatly appreciated.
    David

    Hi
    Both machines have V7 of Quicktime Pro on them.
    Thanks

  • Any problems going from Japanese to English version of LabView?

    I would like to convert some vi's that were developed with the Japanese version of LV to English. Has anyone done this? Any tips?

    LabVIEW was converted from English to Japanese. I do not think there would be an problems going the other way (provided you know Japanese). There are a couple of examples on the web for converting VIs between languages. Start you search on the advanced search page: www.ni.com >> support >> advanced search (it is at the bottom--click on the words).
    Jeremy

  • Can you help me solve ical synch problem going from iPhone to MacBook Air?

    My iPhone calendar contains a lot of important meetings. I am about to migrate from my 3GS to iPhone 5 but since I cannot seem to properly synchronize my iCal from my iPhone to to my MacBook Air, i.e. I cannot see any events from my iPhone in my Mac's calendar. I am thus afraid to activate and jump to my iPhone 5, which is collecting dust at this point, because if this calendar fails to reemerge from the "Cloud" I am in deep horsedung.
    I have all of the iCloud settings turned on for synching. I have gone to Storage and Backup and hit Synch Now and that update seems to occur via any feedback my iPhone is giving me.
    I have a suspicion that since I was forced to create a 2nd account in order to synch "Notes" to the iCloud that such may be causing some of the problems, but honestly, prior to doing that I synched to iCloud so this inability to see my iPhone calendar on my Mac is more longstanding.
    I also cannot seemingly log out of iCloud with one ID on my MacBook Air and sign in with another without iCloud telling me that I am going to lose all of my Contacts and previous data that I synched up with the current ID. What's that all about? That does not seem like typically brilliant Apple Design to me. Most of end up with more than one Apple ID, especially since the "Notes" synch forces you to sign up for yet another iCloud ID. I thoroughly researched that problem online at many forums before reluctantly adding another Apple ID.
    My environment is MacBook Air OS X 10.7.4 and 3GS with IOS 5 (iPhone 5 with undoubtedly IOS 6 sitting in the hangar)
    Thanks for any insight in advance.

    My iPhone calendar contains a lot of important meetings. I am about to migrate from my 3GS to iPhone 5 but since I cannot seem to properly synchronize my iCal from my iPhone to to my MacBook Air, i.e. I cannot see any events from my iPhone in my Mac's calendar. I am thus afraid to activate and jump to my iPhone 5, which is collecting dust at this point, because if this calendar fails to reemerge from the "Cloud" I am in deep horsedung.
    I have all of the iCloud settings turned on for synching. I have gone to Storage and Backup and hit Synch Now and that update seems to occur via any feedback my iPhone is giving me.
    I have a suspicion that since I was forced to create a 2nd account in order to synch "Notes" to the iCloud that such may be causing some of the problems, but honestly, prior to doing that I synched to iCloud so this inability to see my iPhone calendar on my Mac is more longstanding.
    I also cannot seemingly log out of iCloud with one ID on my MacBook Air and sign in with another without iCloud telling me that I am going to lose all of my Contacts and previous data that I synched up with the current ID. What's that all about? That does not seem like typically brilliant Apple Design to me. Most of end up with more than one Apple ID, especially since the "Notes" synch forces you to sign up for yet another iCloud ID. I thoroughly researched that problem online at many forums before reluctantly adding another Apple ID.
    My environment is MacBook Air OS X 10.7.4 and 3GS with IOS 5 (iPhone 5 with undoubtedly IOS 6 sitting in the hangar)
    Thanks for any insight in advance.

  • New Mac mini audio problem - beeping from audio output

    Hi Apple fans
    Please help me. I recently purchased a new Mac mini from my local store. It's three-and-a-half weeks old as of today.
    It's an i5 2.3 with 8 GB of corsair RAM.
    I like to watch movies and TV on it and have the audio connected to an external amp and speakers via the headphone output.
    After a reboot today I lost the sound through that output. All that I hear through it now is an electronic beeping, six notes, descending in pitch, repeating.
    I have no idea what it is, other than annoying since this happened on a brand new computer. Not looking forward to the idea of losing my mini for a week as Apple figure it out, but it may be all that's left to do.
    Maybe somebody here can help me out - anyone have an idea what's going on? I did an fsck -fy already, and there seems to be nothing wrong, based on that check. For completeness sake, I ran the sound over a USB sound card, and the beeping noise was not there, and sound worked fine. Ditto for the internal speaker - no weird noise there, this seems limited to the headphone out port. I've tried different cables, and even amps, and a set of small speakers without amp. The noise is there when using the headphone jack, and it's absent when using the wee internal speaker or USB-based sound. Please help?
    I captured the sound on a video which I've uploaded. It's kind of jarring, so keep your hand on the volume button.
    http://www.youtube.com/watch?v=mUt8miCYcJQ
    http://www.youtube.com/watch?v=mUt8miCYcJQ
    Thanks much for any input - it would be very much appreciated.
    Pascal

    Hi Pascal,
    Certainly strange, but I have no ideas other than having it looked at by Apple.

  • Low audio when going from Xpress Pro to DVD SP

    When I output from Avid Xpress Pro to DVD SP I get low audio on the final DVD.
    I export my Xpress Pro sequences as QT References with the audio as an AIFF file. I was able to improve the audio a bit by going into APack and converting the AIFF to an AC3 file. Even after boosting all the audio in the sequence (back in Xpress Pro) 10DB it's still not great. Any ideas?

    Mix your audio as hot as you can in the Avid...if you are using the -27 Dialogue Normalization setting, you are going to get the levles cut considerably. Use -31 (IIRC) instead...

  • Sample Rate Problems going from Logic to Garage Band

    I've downloaded the Trial Version of Logic Express. When it launched it changes the i/o sample Rate that is required by Garage Band (I'm using a digi002 i/o). The result is that garage band plays back at a fraction of it normal rate (sounds like crap).
    It wasn't a problem until the trial ran out on Logic Express. I could change the sample rate back inside Logic. Hummm ... what to do? I don't see any place to change the rate in the garage band preferences or in the core audio interface. Any suggestions would be appreciated.
    G4 1.25 dual, mirror Mac OS X (10.4.6)
    G4 1.25 dual, mirror Mac OS X (10.3.9)

    updated

  • Delphi5, BDE: Problems going from ODBC 8.1.70 to 8.1.76

    Hello,
    I am working on a Delphi 5 application that uses the Borland Database Engine (BDE) to connect to an Oracle 8.1.7 DB through an 8.1.7 Oracle ODBC Driver. We've been using an old version for a while now, and when we recently upgraded the ODBC driver from 8.1.70 to 8.1.76 we've gotten a LOT of errors with 'Table/View does not exist' when we use TTAble objects. I have yet to see if a TQuery works more reliably, but it seems to be intermittent.
    Does anyone know anything about this problem, with regards to ODBC settings, BDE settings, object properties for TTable objects?
    Thanks,
    Mike

    Okay, I figured it out with the help of a colleague.
    It was the 'Set MetaData Id Default to SQL_TRUE' ODBC driver setting. This needed to be checked because I was using case insensitive table names in queries that put the names in double quotes.
    Guess I should have read those release notes in more detail!!
    -Mike

  • Sample Rate Problems going from Garage Band to Logic Express

    I've downloaded the Trial Version of Logic Express. When it launched it changes the i/o sample Rate that is required by Garage Band (I'm using a digi002 i/o). The result is that garage band plays back at a fraction of it normal rate (sounds like crap).
    It wasn't a problem until the trial ran out on Logic Express. I could change the sample rate back inside Logic. Hummm ... what to do? I don't see any place to change the rate in the garage band preferences or in the core audio interface. Any suggestions would be appreciated.
    G4 1.25 dual, mirror Mac OS X (10.4.6)
    G4 1.25 dual, mirror Mac OS X (10.3.9)
    G4 1.25 dual, mirror   Mac OS X (10.4.6)  

    I've never had any such problem with Logic Express. GB files just load up, and work fine. Did you change anything in Logic Express? There are setting for that there, but even songs I open after I changed LE to 24 bit, work fine.
    Wait, are you saying LE is changing the sample rate, and then it stays that way when you open GB? Hmmm, What do you have LE set for? I think mine is set at 24/96, but I'd have to look to be sure. But I am not using the same interface as you are. It might be something you just have to live with. Have you tried posting this in the LE7 forum? Maybe one the gurus there knows what you can do.
    Oh, and I am using GB 2, not GB 1, but I am not sure that is relevant.

  • Problem going from AE to PrePro

    Hi All,
    I am running Adobe CS5 Master Suite…
    I have a set of plugins from Red Giant Software called “Trapcode Suite 10 (one suite product is called “Particular”) ” for After Effects and a set of templates for use with these plugins called “Cassidy Bisher’s Text Effects Vol 2 for Trapcode Suite 10”.
    Everything looks fine in AE CS5 but when I save as Priemere Pro CS5 project and open in PrePro I get the following errors:
    “The editing mode used by this sequence could not be loaded.  The sequence will be opened in Desktop mode”
    Then this error:
    Video Filter missing:  AE.ADBE HUE SATURATION
    Video Filter missing:  AE.tc Particular
    The PrePro project loads but a lot of stuff does not work when I play it in PrePro.
    Am I missing something simple?
    Thanks,
    Randy

    The message abou the editing mode is telling you that the characteristics of the After Effects compositions don't match the characteristics of the format-specific native sequences in Premiere Pro. That's not really a big deal. The desktop editing mode is just the default editing mode for sequences with arbitrary characteristics.
    Saving a Premiere Pro project out of After Effects doesn't preserve all characteristics of the After Effects project. And Premiere Pro can't use all of the effect plug-ins that After Effects can.
    The process of converting from an After Effects project to a Premiere Pro project uses the same mechanism as copying and pasting between these two applications. You can see tables of what is converted and how here.
    Dynamic Link has much higher fidelity because it uses a background  version of After Effects to render and serve the frames to Premiere Pro,  rather than trying to convert elements of an After Effects project into  elements of a Premiere Pro project.
    See this page for a list of other ways to exchange information between After Effects and Premiere Pro:
    "Working with After Effects and Premiere Pro"

  • Problem going from d2 to e2

    To all -
    This is an FYI. We just moved from d2 to e2 at the urging of the support
    center as we had experienced several corruptions of workspaces with d2
    during updates. E2 has solved this nicely but we have just suffered from
    a new problem.
    We are using window inheritance including inheritance of things like
    standard buttons and scroll bars. Yesterday, I made a change to one
    superclass to rearrange the order of buttons in a grid. After I did this,
    16 of 18 subclass windows were not longer accessible. We could not
    compile them, export them, or every go into the window workshop! We
    kept getting FTEXEC errors in a qqds.dll module. And of course this was
    during testing of the application prior to deployment for a trade
    show on Wednesday! Panic city...
    The support center explained the likely problem as one of duplicate
    tags. Apparently, we had in d2 created window widgets (specifically
    grid fields) without giving them names. We had done this variably
    on the superclass and subclass. When Forte e2 tried to merge the
    super and subclasses, it found a conflict between the tags (apparently
    these are system assigned numbers). It is supposed to just give a
    warning about these problems but in this case, it completely crashed.
    The solution was not completely terrible but took several hours. We
    first fixed the superclass to make sure all grids were names. Then
    we dragged/dropped the subclass windows into a new project. There we
    could access them and give all grids names. Then we deleted the originals
    and dragged/dropped the copies back in. Voila! Fixed after about 3
    hours and a bit of sweating.
    The moral of this story is to name all widgets including grids and to
    tread lightly when changing widgets in superclass windows.
    Jerry Fatcheric
    Relational Options, Inc.
    Florham Park, New Jersey
    201-301-0200
    201-301-00377 (FAX)
    [email protected]

    We've been talking about this issue for a while now. Take a look at this post:
    Temperance Harkins, "are you an Audible.com user?" #16, 11:20am Oct 26, 2005 CDT

  • Arport express problems going from 5ghz to 2.4ghz

    Hi all I'm completely stumped with this one.
    Last night I needed to change the express from N 5ghz to N/B/G 2.4ghz.
    So using the manual setup screen I selected the options. but when I clicked on update, I just get the spinning wheel and the imac, macbook and ipod could no longer see the airport at all, despite it having a green light.
    If I plugged it in to the imac using a cable it could see it at this point and I confirmed the settings were correct for N/B/G 2.4 ghz. It just doesnt want to talk to anything.
    To get it working I had to do a hard reset and plug it back in to the imac using an ethernet cable, and set it up again but it seems to only want to work on 5ghz.
    I'm pretty sure its not the airport at fault as I took an airport back to the store a while ago as it was doing exactly the same thing and was in warranty, I was told it was duff and it was replaced.
    Has anyone seen this type of behaviour at all? I'm using utility version 5.5.1 and firmware 7.4.2
    Any help would be appreciated.

    Welcome to the discussions, Jamesn1!
    I suggest that you try a factory default reset and then try to reconfigure the AirPort Express (AX) again.
    To perform the factory default reset:
    Power down the AX for a few moments
    Hold in the reset button and while you continue to hold the reset button in, plug the AX back in to power
    Keep holding the reset button until you see the amber light begin to blink more quickly
    If you try this a few times and the AX will not allow you to create a 2.4 GHz network, I'm afraid the AX is defective and will need to be replaced.

  • Problem going from Lightroom 3 to Camera Raw 4.1

    I edit in LR3 then export to the original folder. When I open the edited photo in Camera Raw it is completely different. Not only is it different but it looks terrible. I'm making sure that when I export it from Lightroom that I have the correct version of Camera Raw chosen so I'm not sure what the issue is. Any help would be greatly appreciated. Thank you.

    Lightroom 3 is using the equivalent of ACR 6.x so ACR 4.1 cannot use the develop settings from that version of LR.
    Lightroom 1 is fully compatible with PS CS3 ACR 4.x

  • Problems going from LR 2.1 to Photoshop CS3

    Hi.
    After coming home after a shooting session yesterday, I did some pre-editing in LR 2.1 (in which I'm not even an amateur yet) as usual. Then I wanted to proceed to editing i CS3 (Ctrl/E in Windows). I only do RAW shooting. But then, instead of opening this files for editing, CS3 displays a dialogue box with an "Open as" option. As suggested file formats are only the Photoshop formats. Strange thing is, that all my previous pictures (all stored in folders with yyyymm format) until my November ones, open directly in PS without asking me to go this troublesome way.
    Also, if I choose NEF - I'm using a Nikon D90 - instead of the suggested photo formats, the files will open in ACR and after editing I will not be given the choice of file quality for saving etc.
    A couple of days ago I slightly messed up the catalog folder, which I believe I succeeded in restoring, but I don't know if that will solve any problems here?
    Finally, I also have PSE 5.0 installed on my computer, but it doesn't appear in LR's "Edit in" list. Any way to solve this?

    tried a few more times and if iTunes doesn't freeze when ipod plugged it freezes when switching to "iTues store" or "podcast"
    anyone know if a patch is comming to address the issues?

  • Audio problems going to tape

    I have a 20 min program for a client - audio is fine in the final sequence, that sequence nested and on the QT file of that sequence - no issues. However when I go to tape, I have a few dropouts and distortions. I am on a Mac Pro 8 core, the media is on a separate internal drive (not boot drive). I have tried print to video and edit to tape...same issues. I have tried 2 different Sony decks, 2 computers and 3 different new tapes...I need to deliver the master within the hour!!! I have never had this issue before ! HELP!
    Ann

    - What tape are you trying to edit to?
    Digi Beta, DV, etc. (If via Aja, then try to set the REF-switch on the deck to video-input)
    - Are the dropouts always on the same spot?
    - Did you try a different tape?
    - If FireWire Deck, disconnect all other FW devices
    - Did you export the sequence as Selfcontained movie and Edit to tape THAT sequence.
    - Is all the audio 48 kHZ
    - How is the deck connected.
    - How is the audi connected
    - Are those dropouts not high peaks that get distorted,
    - etc.
    Tell us as much as possible
    Rienk

Maybe you are looking for