Audio problem once exported to Quicktime

Everytime I watch my recently exported quicktime the Audio is all scratchy and on a loop.
With none of my dialouge, voice over or music.
What's going on? :O

Adobe Community: FAQ: What information should I provide when asking a question on this forum?

Similar Messages

Audio problems after exporting out of iMovie

Aloha!
I have a 48 minute movie created in imovie with lots of audio, clips and transitions. It works perfectly when I preview or play it in iMovie. When I try to share it to iDvd, export to iDvd, or to save it as a Quicktime movie, it looks great for several minutes, then the audio tracks get messed up. The correct audio is there, but overlayed on it is snippets from farther into the project, or whole tracks from later in the project, or places where the audio drops out completely. I spent about 70 hours creating this movie and really want to burn it to DVD so I can play it on the big screen. I did burn one version to dvd, and it looked and sounded great - until the audio problems began... any help would be greatly appreciated.
In Garage Band there is a feature where you can consolidate your bits into one track - should I be doing something in iMovie after I finish it before I export it?

what kind of speed changes do you mean? If you mean using some clips in slo-mo (with the sound dropped out) then yes I used a LOT of them... but they are also working fine for the first several minutes...

Keynote movies stutter badly once exported to QuickTime

My Keynote presentation features a 2 minute movie. When I export the presentation to QuickTime, although the slides work fine, the movie stutters badly. To be specific, the movie audio is fine, but the visuals stutter badly.
Any workaround for this? Thanks!

I've been having problems in iMovie and Quicktime both. Whenever I used a song from iTunes in an iMovie, I would get stuttered playback. Many others experienced problems with stuttering video when they had extracted audio. Your particular problem could be many things. It could be your graphics card is too small to handle this. If you are running OS X tiger and have virex installed, then virex is using most of your CPU processing power (Do a search on Tiger and Virex to get the uninstaller). Finally you could be having problems with quicktime 7.0.3. If that is the case, then you can just reinstall 7.0.1 and everything should work fine. Or it could be something else. Hope some of this helps.
Thanks,
Clint
Link for virex uninstaller: http://docs.info.apple.com/article.html?artnum=301525
Link for quicktime reinstaller: http://www.apple.com/support/downloads/quicktime701reinstallerforquicktime702.ht ml

Can Apple fix the 12 bit audio problem once and for all?

I have had persistent audio problems from I Life V3 all the way up to I Life 06. Sometimes it is synch issues. Sometimes it is audio dropping out. I have been through the various forums and applied the various remedies with some successs, some failure. The basic problem is that I have an extensive quantity of Mini DV tapes dating back to 1997, most recorded with 12 bit sound (prior to 2002). Apple's basic stance has been, you must use 16 bit sound or I Movie and/or I DVD won't work and . And proposes awkward workarounds. Basically placing the onus on it's own consumers. Why can't 12 bit sound support be included in I DVD 06 and these persistent audio issues put to rest once and for all? Is there some overwhelming technical reason why it cannot be done?

I don't know about overwhelming, but the DVD specification (which was not developed by Apple) calls for the audio to be sampled at 16-bit/48KHz (I think you might also be able to use 96KHz as well). This is what the software expects. If you choose to use another sample rate then the software may or may not be able to "fix" it in post. The real problem is that many camcorder manufactures set the audio to 12-bit by default.
Mike

Trouble with 2nd audio track when exporting to Quicktime - please help!

Ok - I've made my DV movie in IMovie - all ok. When I export to Quicktime the second audio track (an mp3 imported from iTune) jumps up in volume unexpectedly but always in the same place. There is no such jump in the original and I haven't put in any nodes to boost the volume etc.
Any ideas guys??
Thanks
Les

Hello,
Further reading and search in this forum make me think I was right : it seems to be an iMovie 6 bug.
http://discussions.apple.com/thread.jspa?messageID=2037970&#2037970
I would suggest to have the maximum number of person reporting a feedback to Apple to get a quick fix
http://www.apple.com/feedback/imovie.html
Thanks
Seb

Final cut pro problem when exporting with quicktime movie

Hello!
I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
keyfram 10
bitrate 6000
faster encode
size 1920x1080 HD 16:9
its not a problem the movie works fine all the way.
But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
If you have an e-mail i can send you just the part where this happening.
Please help me!
Thanks Gabriel

I am also expriencing the same error. Tried every solution listed so far:
1. Switch off background rendering. Trash render files. Don't render. Export.
2. copying the project within Final Cut Pro into another project
3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
What's going on?

Audio problems on export to QT - FCP HD 4.5

I've seen some posts about audio trouble when exporting a sequence to create a Quicktime file--but the solution, re-render and run Audio Mixdown, isn't working for me. Actually I don't even see an Audio Mixdown option, but I know there used to be, maybe in FCP 3.
What happens is that in one area, just the music tracks cut out--although it plays just fine in the sequence. Any ideas for FCP HD 4.5? Thanks!
PowerBook G4 15 Mac OS X (10.3.9) FCP HD 4.5

It is located here: SEQUENCE>RENDER ONLY>MIXDOWN.
That usually solves it.
Shane

Audio problems when exporting files from Premiere Pro CS5

I try to post in English.
I have audio problems in Premiere Pro CS5 when exporting a film.
I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
Thanks for answers
Frieder

Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

Premiere Elements 8: Audio sync problem when exporting to Quicktime H.264

Program plays back fine on the timeline also when saved as a mpeg file. QT file audio sync is off. Using QT player to play back. Any thoughts?

Check you have the very latest version of QuickTime (7.7.1 at time of writing): QuickTime 7.7.1 for Windows
Cheers,
Neale
Insanity is hereditary, you get it from your children

No Audio when I export using quicktime conversion

Hi,
This problem has just started. In my time line my movie places with both audio and video. When I try to export it using quicktime conversion I get a file with video but no audio. If I go to the audio settings button and click preview, I hear nothing. I have exported using the exact same settings many times before without problems.
If I export the file using quicktime movie, I get both audio and video.
This is driving me crazy, Can anyone help? Thanks!

I got no audio on the DVD when I exported from FCE using the Quicktime Movie setting. I finally determined it was because my audio was at 44.1k Hz. I upsampled to 48k and there was sound on the final DVD. This is not normally a problem when input comes from a camera, but if you are doing a DVD of a Keynote presentation and adding separate sound to it from a CD, this becomes a problem.
Certainly no more than a little annoying that there's nothing said during the FCE export that this audio won't be exported. It's just not there.

Audio problems when exporting

Hi there.
I'm having trouble exporting my video file. The resulting .mp4 has audio that is screeching. See video below, password 'audio55'.
Private Video on Vimeo
The problem arose when I updated from Leopard to Yosemite on my imac. The audio was messed up upon export whether I used CS5 or CC. So I used Time Machine to jump back to a date before I upgraded to Yosemite and now I'm exporting from CS5 again, using OS X 10.6.8 (Leopard) and the same issue still happens, as shown in the video.
I have been using this footage (AVCHD) with the same sequence settings for years. There is one error that pops up before I open the project, that the Scratch disks are write protected or unavailable and that they need to be set to my documents folder, which I 'ok'.
Please help!
Thanks,
David

Hi there
I've seen others report that it's helpful to adjust the audio so that each slide doesn't begin playing audio until .2 or .3 seconds into the slide.
Perhaps try that and see how you fare.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Audio problems after exporting

I have created a 43 minute iMovie with very, very heavy editing.
I love my movie, and until recently, it would play back fine within the application.
(but now, not even this works for me anymore.)
When I export the movie in any format, My audio gets all mixed up.. Random audio clips from other parts of the movie are heard with, or substituted during other parts. It is so frustrating after so much hard work.
Is there any way to resolve this problem without having to start from scratch?

Dito! I just worked for months on 45 min movie and the same problem. And the answer is WHAT?!!!!!!!!!!!!!!!!!!!!!!!!!!!!! whats the piont of beat markers and the ability to use all these things and now i have to WHAT??????? go back and try to re edit the speeds? Great I switched to an Apple only to find out BIG mistake. I cannot believe this has not been fixed. Whata joke! I have to get this DVD in the hands of someone by the end of the weekend that might be able to change my life and i have made a GRAVE mistake in intrusting it in a MAC

Problems with exporting to Quicktime in AE

Hello,
when i export my sequences to Quicktime, the render process alwasy stops right befor it s finished, and after effects hangs up.
This happenes with Black Magic Codec, and dnxhd codec. First,it also happened with h264 (proxys), but now it s ok, only BMC and Avid Codec.
When i export to 10 Bit 422 Avi, everything is ok, but i need the 444 from the Black Magic Codec...
Even on Mediaencoder it s not working, seems to be a quicktime problem...
Any ideas?

You haven't given any useful info for troubleshooting. What exact version of AE are you using? 12.0.1? 11.0.3? 10.5.0?
And, actually, all of this info would also help.

AUDIO PROBLEMS when exporting to tape

Hi!
ADOBE PRO CS4 on VISTA.
a) Produced my film on timeline and there everything is perfect. Audio and video are fully synchronised.
However: when I export to tape, playing the exportresult, audio comes about 10 seconds later then the corresponding video! Already from the very first clip!
I rerenderd audio and Work area a few times and also tried Clip -> Audio Options-> Render and Replace but nothing seems to work out.
This is the second time I have this problem.
b) When there is no solution for this problem ( an awfull idea!!) I think I have to Unlink Video and Audio for all my clips (about a thousand of them) and then shift the audiopart about 10 seconds to the left.
I found out that "group-unlink" with the help of the ALT knob (an advice I read about here) doesn't function with me !!
Is there a solution for these problems? Thanks a lot!

[Moved to CS4 and Earlier.]

Audio problem when exporting

Everytime I'm exporting something with FCPX, the audio is really weird, kind of laggy. Here's an example: http://www.youtube.com/watch?v=AkLNLKfZVxs
It does that on every one of my projects. They all use songs from the iTunes Store and no matter what presets I choose, it does the same bug.
What should I do about it? How to fix it?
Thanks

I see you are on Lion. There have been reports that Lion has problems with compressed audio, which would include songs from iTunes. I'd try converting your audio to uncompressed (AIFF) and using the uncompressed version.
There are many tools that can do this, but you can use FCPX if you wish. Create a new project, place your song on the timeline, and then Share->Export Audio. Select "AIFF File" in the dropdown. After it is exported, import the resulting file (it will have an .aiff file extension) into your Event, and use that file instead of the original. See if that helps.

Audio problem once exported to Quicktime

Similar Messages

Maybe you are looking for