Audio problem under win2000

I buy 6309 mainboard many years ago. During the past time, the mainboard work very well. Now I try to use the AC sound function on maindboard to recorder sound from my microphone using the recorder of win2000 system. But it get a lots of nose in it. I don't know what's the problem. But if I use the voice recongnizse funtion to test the audio. It can work well now. Under the visual basic development, if I use the multimedia control to record sound it still can not work. But if I use the "microsoft speech SDK" the record sound, It can work well. I have been try all the way. I can not find where's the problem.
Is there anybody can help?

Go to
http://www.msi.com.tw/program/support/download/dld/spt_dld_detail.php?
UID=124&kind=1
You should be able to get the latest drivers.

Similar Messages

USB audio problems under Leopard

I was a long time upgrading to Leopard, but since I have done so I've had nothing but problems with audio. I have an Event EZBus connected via USB and it worked fine under all the operating systems up till now.
It seems to work fine initially in any program, whether I'm streaming audio from the internet, or using an audio program like Digital Performer. But after varying amounts of usage of audio, it begins to stutter, with longer intervals at first, broken by brief soft static sounds, then the stuttering intervals get shorter and shorter each time I play something, until it's more stutter than audio.
Quitting and restarting whatever application I'm using often cures the problem temporarily, but then it just starts again and gets worse and worse until I quit and restart again.
I've tried every kind of troubleshooting I know of and am at my wit's end. Did Apple make some major change to Core Audio that now has rendered my audio interface obsolete, or does anyone have any idea what might be causing this and what can be done about it?
Thanks.
Marie

Apparently there were drivers for Jaguar and Panther. However, check out this web page and see if it helps. http://www.jackosx.com/download.html

Apple LED 24" Cinema Display audio problem under 10.6.8 (with post fix)

Hi all,
I'm using an Apple LED 24" Cinema Display with a 2010 MBP 15" and had been using 10.6.8 without problem. After installing the post-fix I now get static noice on (clipping?) when music contains lots of base. If I switch the output to my MBP's built-in speakers then the audio is fine.
Is there any way to un-install the 10.6.8 post-fix?
Thanks,
Yanik

Solved the issue. This issue coming up after installing the 10.6.8 supplemental update was just a considence. I ended up tracing the issue back to my Atlona AT-MDP21 Mini-DisplayPort KVM switch and after fiddling with cables the issue went away.

USB Audio Interface with bad latency problems under bootcamp

Hi everyone,
I am currently running an Edirol UA-25 USB audio interface under Mac OS X for my normal music-listening needs. Everything works fine, and there is next to no latency when messing around in Garageband .
However, when I switch into bootcamp to use Cubase SX 3 for audio production and sequencing (has all my windows-only VST instruments), the interface pops and crackles extremely. It's almost as if the USB interface is losing sync..?
When I turn the buffer up on the drivers, this stops, but it is annoying as I like to have low latency when recording for direct monitoring.
Can anyone give me any insight into why this might be happening?
I know this is an audiophile-type question, but I thought I might as well give it a go. Or heck, if you wanna direct me somewhere where they might be able to help me!
Cheers!
Chris
P.S. Using a MBP 2.5GHZ 2GB RAM

when you select , lets say the USB device in your audio preferences, it will be used as the input and output device. You can use the USB interface's audio outs plugged into your mixer, and use speakers or the headphone jack. When you create an aggregate device, using the USB device and your built in audio, and choose it in your audio preferences, this allows you to use the inputs and outputs of both the USB interface and your built in audio from your mac. So now you can record from one device while listening back on another. meaning you can record the audio from the USB device and listen back using your Mac speakers or from headphones plugged into your mac.
if you get a better audio interface, one with mic inputs, you will still need to connect it to speakers or plug in headphones to it to hear audio. If you have the budget, a dedicated firewire audio interface will usually give better results, in audio quality, than a behringer mixer and a usb interface.

Audio Problem since upgrading to Mountain Lion

Has anyone encountered audio problems with their iMac? I just upgraded to Mountain Lion on my i7 27" with 16GB of Ram and found that the Audio starts to get distorted and eventually cuts out after about an hour! It starts cutting in and out when I move the mouse and eventually there will be no sound at all!
Sometimes it can take over an hour of steady use, my last time was watching a movie on Netflix. I initially noticed this using a USB DAC Headphone Amp.
I never had any Audio problems before, my machine is over 1 year old.
I enjoy watching movies in iTunes and DVDs, but this is making it difficult! A full restart usually fixes the problem for a time but it will eventually come back
I'm seriously thinking of going back to Lion for the time being and seeing if it is a Hardware problem.

i don't know if mine is the same issue, but i had no sound through any of my applications after upgrading to mountain lion. here is what i had to do to fix it:
-- applications > utilities > audio midi setup > UNmute all options under "built-in output" (they were mysteriously muted)
Also, I noticed that the options for "use this device for sound output" and "play alerts & sound effects through this device" were no longer assigned to my Built-in Output device. They were assigned to some other random sound driver. To fix, i right-clicked on Built-in Output and reassigned those items to my built in speakers. All fixed now!
very weird problem, though.

HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)

This solution is for WINDOWS ONLY!!! Unfortunately I believe
it is a bug in flash itself as I have read more than one instance
of this same no audio problem occuring on MAC'S and LINUX based
systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
PROBLEMS, PLEASE POST THEM IN THIS THREAD.
Description of the problem: Video sites such as YouTube,
VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
not stream embedded audio. Viewing a YouTube video, for example, on
VideoSift.com results in the video playing back with no audio.
However, by going directly to YouTube and playing back the same
video, it appears to work.
THERE ARE SEVERAL POSSIBLE SOLUTIONS.
Problem: You may be missing your WAVEMAPPER driver.
Cause: Wavemapper driver was removed during installation or
updating of the Flash Player. It might not necessarily be Flash
that removes it but apparently something does.
Solution #1: Google "Flash No Audio WAVEMAPPER" for
directions, its been covered a bunch, but basically requires
running REGEDIT and readding the WAVEMAPPER key to the appropriate
location and value in the registry. Its not as difficult as it
sounds.
http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
if your wavemapper key is installed correctly...
Possible Cause: Corrupted or damaged flash content preventing
audio streaming from working correctly.
Soltuion #2: Run CC Cleaner and delete only cached Flash
content. It is a free program, again just google "download CC
Cleaner". This particular solution worked for me.
If CC Cleaner also does not work, the description of your
problem may differ slightly. In my case on several computers, one
day it worked, the next day it didnt. If it never worked, this
would be a logical solution for you. One variation of this that I
have found is to create a new Windows User Account and log into it.
The reason the CC Cleaner method may work better is that the User
Accounts have their own separate cache folders so a corrupted cache
preventing audio playback on one profile will not be available on
the other User Account to cause the same problem. I wont explain
how to do this as the CC Cleaner will work better but if you are
curious, yet again google "create new windows user accounts". I
have also seen this method work on one of my affected computers but
it did not fix the issue on the account I was having problems with.
http://www.ccleaner.com Install
and run it, use it only to remove Flash under the Applications Tab,
Multimedia, Adobe Flash Player. Check it and uncheck everything
else, then hit Analyze then Run Cleaner.
Possible Cause: Missing Codec
Solution #2: Download and install the K-Lite Codec pack.
Again, google it. A CODEC stands for COmpressor DECompressor and is
a way to make audio and video files small enough to be transferred
on the internet. There are a lot of different codecs and if you
want to play back a video that was compressed using a particular
codec, you will need that same corresponding codec to decompress
your media source and view its content. Basically if you dont have
a codec, you cant observe the content of the media. If you have a
VCR and want to play back a DVD, you are out of luck unless you get
a DVD Player. DivX and XVid Codecs are some of the very popular
codecs used on the net, but to get those, I still suggest getting
the K-Lite Codec Pack.
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Solution #4: Go back to Flash 7. If it aint broke dont fix
it. This Final alternative is only to be used as a last resort.
You'll have to get rid of Flash 9 and go back to Flash 7. The
really tricky part here is that you have to prevent Flash from auto
updating itself. If you install Flash 7, and hit up YouTube, you'll
immediately get Flash 9+ installed again with the same problems. So
AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
yet again go google it) make a new text file and name it MMS.CFG,
in the file put this one line "AutoUpdateDisable=1" (without the
quotes) and put it in BOTH your c:\windows\system32 AND
c:\windows\system32\Macromed\Flash folders. This will prevent flash
from Auto Updating to 9+, then have to find some place to download
the old flash 7 installer. I found one here.
http://www.intercomm.com/downloads/Flash7.
Only problem is that most sites will try to make you install Flash
9 and Flash 7 does not work on all sites, but it does on some like
YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
You will probably want to IMMEDIATELY go to
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
after installing Flash 7 and UNCHECK the update feature
I've tried to write this quick little guide at 3AM so Im not
going to take more time to research other ways to fix this problem.
If you have other solutions, such as for MAC and LINUX, or feel
like adding on to something else that I've written here (links
would be useful to the downloads I suggested) or correcting any
mistakes I probably have made, please say so.
One of these solutions is bound to help you. Theres multiple
causes for this no audio problem so there is obviously multiple
fixes.

http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com

Firewire audio problems with OS X 10.5.6

Hello,
I’m experiencing audio problems with Firewire 400 on my Macbook running Mac OSX 10.5.6.
I’ve got a 2.4Ghz IntelCore 2 Duo with 4 GB RAM and 59 GB available on the internal HD.
It’s hooked up to a brand new Mackie D.4 mixer with 2 Firewire outputs. The problems occur on both Firewire outputs.
I’ve installed automatically from the software update (which I will never do again) to 10.5.6. I never tried the D.4 with 10.5.5 so I can’t tell if the problems occur there also.
The main problem is that after a couple of minutes of recording the sound starts to break up and get really distorted. After a while the sound comes back again.
The second problem is that Soundtrack Pro or Audacity don’t get any audio input from the D.4, although audio input is clearly visible in System Preferences – Sound.
The only sound program that works with all 14 Firewire channels is Ableton, but also in Ableton the distortion occurs.
An example of the distortion can be checked here:
http://media.kaalslag.com/firewire-distortion-problem-mackieD4+Macbook.mp3
I’ve roamed several forums and sites to solve the problem and I tried these solutions:
I updated again to 10.5.6. with the full combo download from the Apple site. Restarted. Problem still there.
I shut Airport off, because lots of sites mentioned problems with Airport conflicting with audio/firewire. Didn’t work.
I did the work around with shutting the Macbook off, disconnecting the D.4, restarting the Macbook, opening Audio/Midi Setup, connecting the D.4 again, toggling the format frequencies a couple of times. Again, no use.
Right now I’m using my “old” Macbook again to record from vinyl. This one is still running on OSX 10.4.11. No problems so far.
I’ve had the distortion problems occuring before with an USB interface. Hoped that the Mackie Firewire would solve the problem, but it seems now that there’s a serious audio Firewire problem which is still not solved in OSX 10.5.
Any help, tips and/or a work around would be much appreciated. Thanks!

You could try using another computer in Target Disk mode (as an "external HD"), or you can connect the firewire cable and disconnect all other network cables (turning off airport). Then on each computer go to the "Network" system preferences and select "Built-in Firewire" from the list of ports and choose "Manually" from the drop-down menu next to "Configure". Enter the following IP addresses and subnet masks, apply the changes.
_Computer 1_
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
_Computer 2_
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
After those ip addresses are entered and you've clicked "Apply", ensure that for both computers you have file sharing enabled (done in the "Sharing" system preferences), and then check the Finder sidebar to see if the computers can see each other (their names should appear under "Shared" in the sidebar--if not, try restarting).
If the computers dont appear (even after restarting), using the "Connect To" option that's available in the Finder's "Go" menu. In there, to connect to another computer enter it's IP address as follows:
afp://IP_ADDRESS
If you're on the computer with the ip address of 192.168.1.1, you would enter 192.168.1.2 as "IP_ADDRESS". The "afp" is the protocol (just like "http" for web), and stands for "Apple Filing Protocol"...Apple's file sharing protocol.

IDVD 4.0.1 audio problems--console log

So, I too am having audio problems in iDVD. Not always, but recently. Audio is recorded for parts, but not all of source from iMovie. Looking at the DiscRecording.log in Console, I see:
iDVD: Burn started, Sun Mar 19 20:48:18 2006
iDVD: Burning to DVD-R media with DAO strategy in MATSHITA DVD-R UJ-825 DAM5 via ATAPI.
iDVD: Requested burn speed was 47x, actual burn speed is 2x.
iDVD: Burn underrun protection is supported, and enabled.
iDVD: Burn finished, Sun Mar 19 21:18:02 2006
iDVD: WARNING: The DiscRec SPI from the DiscRecording framework is deprecated in 10.3 and later.
iDVD: WARNING: This app is contributing to an overall degradation of system performance and should
iDVD: WARNING: be updated to use the DR API instead.
Any ideas on what to do to fix it?
Thanks!
Matt
Powerbook G4 Mac OS X (10.4.5)

Hi Matt
There are so many things that can go wrong.
How did You go from (iMovie?) to iDVD.
- using the Share/export to iDVD from within iDVD
- dropping the project QT movie into an open iDVD theme window ?
Version of OS, iMovie, iDVD and QT ?
What brand of DVD disks ?
Anything connected to Your Mac during burning process ?
Any other programs running under process ?
Yours Bengt W

Install Problems under Windows 2000

I have recently upgraded my machine from WinNT4 SP6 to Windows 2000 Professional, and now I cannot install JDeveloper. I have tried 3.1, 3.2 and 3.2.2 and all of them hang at different stages during the installation. There is no error message, the install application just stops responding.

I haven't had problems with any other products installing. I have tried installing JDeveloper 3.2.2 with the bare minimum of components as well as trying the typical installation and nothing seems to work, Im not running anything in the background. The system is a HP Kayak XM600 with an intel PIII 800Mhz 256Mb RAM and an ELSA Synergy graphics card. Someone else I know tried to install it on a Dell machine with a different setup, but under Win2000 Professional, and the install failed on them as well.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by JDev TEam (Laura):
Shaun,
We only support Windows 2000 for release 3.2, so I wouldn't bother with anything earlier. We are not aware of any issues with Windows 2000 Professional.
Have you had any problems installing other applications since your upgrade?<HR></BLOCKQUOTE>
null

Audio problems and can't open project to another computer.

I'd like some help with moving a project from my G4 powerbook (10.4.3 1Gb RAM) to my G5 iMac (10.4.4 1.5Gb RAM) both with ilfe 06 installed. I copied the project file across and it won't start up on my iMac. The reason I'm trying to move the project over is that the audio quality on the entire (powerbook) project is absolutely u.s. (created on my brand new powerbook with factory settings intact). I have already used iMovie on my iMac with the same camera and it worked just fine and was kinda hoping that 'porting it over might cure the problem, although I'm not at all sure it will. I think the fault is probably embedded in the original. (incidentally, I CAN open the moved project when I connect my powerbook to my iMac)
Audio problem:
I noticed, while importing the clips, that my powerbook started sporadically cutting out the audio (unusual I thought!) but I was under a bit of pressure to complete and thought it was just a temporary glitch.
I'd appreciate some help with that also, if anyone has a suggestion.
Anyway, as I said, the project simply won't open on my iMac (I've checked permissions they seem OK) iMovie starts up when I click the project, but stalls until I click iMovie's icon in the dock, where upon the previous project I worked on loads up fine.
Most frustration overall, I thought if I had 2 machines I would have ultimate flexibility - It's not woking out like that at all.
I'm apprehensive about upgrading my powerbook to 10.4.4 at the moment - frightened I'll loose the whole thing!!
I've used iMovie 2, 3 and 5, never had any issues like this before.
iMac G5 + Powerbook G4 (10.4.3) Mac OS X (10.4.4)

Same here. I don't have a solution, but I understand exactly your problem. This is what I did.
Imported movies into iPhoto from stills camera.
Opened iMovie, new project bla bla, dragged from event library (iphoto videos).
Made/edited movie etc.
All gone well. Exported to iTunes/iDVD etc no problem.
Now, I don't need to keep all the original video clips in iPhoto so can I delete them?
Yeah sure, I'll just drag the iMovie project to my ext HD as per the iMovie help files.(in iMovie)
Opened project that is now on ext HD.
File/Consolidate/Copy clips & Move events.
But.... it doesn't. The 'Copy clips' box even says '2.2gb' which is the right amount for the movie clips. But they never go to the iMovie project file on my ext HD.???

Pavilion 751n audio problem

hi all
im having some audio problems with my pavilion 751n PC. it won't play music or sounds. and when i try to play music it says that theres no deice. also when I go to device manager C-media AC97 Audio device its highlighted in yellow and under device status it says "this device cannot start." I've have fully updated my computer and i tried re-installing the device but nothing works. could someody help me please!!!!!!?

The issue seems to be due corrupt audio drivers.
Try reinstalling the drivers using Application Recovery.You can find the instructions in the website below:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&docname=bph07142
You can also try installing the AC 97 drivers from the following link:
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=23&Level=4&Conn=3&DownT...
Hope it resolves the issue

Outgoing Audio Problems

I have an intell iMac 2.4 GHz, with 4 GB ram. About six months ago I started to have outgoing audio problems. It's an old computer but works pretty well. Well, except for this. It doesn't matter if I use FaceTime, Google Hangout, Skype (video or just audio), the is static and screetchy noises on the receiving end. I can't hear it on my end. There is no problem with incomming audio, either through voice or video chat, or other steaming services. Can anyone help me out. What do you think this is? A simple mic problem?

Had the same problem, no audio on incoming or outgoing calls and only could hear the conversation of the call if I put on speaker. It seemed to start after I did a recent IOS update this past month. I tried restart, reset and restore of my iPhone but nothing changed. It appears not to be a software issue but a hardware problem. I got my phone this past summer so it was still under warranty and got it replaced.

Audio problem with iTunes feed when played on iPod

I'm writing to see if someone can help.
The audio on my podcast works fine at Libsyn (at http://epltalk.libsyn.com). However, the same version that's on iTunes has audio problems when played on an iPod (it plays fine when it's played from the iTunes program on my Mac). During the interview portion of the podcast on my iPod -- downloaded from iTunes (listed under 'EPL Talk')-- you can only hear the answers, but you can't hear the questions (my voice).
Does anyone have any suggestions of what could be wrong? All of my other podcasts I listen to on the same iPod play fine. Very strange.
Cheers,
The Gaffer

Try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.

Audio problems while playing videos from superdrive

Hi, i've got a macbook pro with leopard and a bootcamp partition with windows xp.
When i play videos (divx or dvds) from my superdrive under windows, i have audio problems (like noise), but the same videos are fine in leopard or if i play them from another storage, for example from usb.
Perhaps it's a problem with last bootcamp drivers..or maybe there is something wrong with my superdrive. i remember this wasnt an issue when i bought my mac (less then a year ago).
Thanks in advance for the help.
Mirko

I'm having the same problem.
I had a video file that I had to convert for my iPod & iPhone, after doing so, only a white video screen and just the audio.
What the heck is going on? it seems like a few people are having this problem!

WinDVR audio problem

I have TV@nywhere Master 8606, I'm using WinDVR 3, everything is working fine except for when I pause live TV, here's the problem:
While watching TV, if I press pause the tv pauses, when I press play, video plays but with no sound. In WinDVR under Audio Input settings, Source is set to Line-In. I tried setting Audio Input to CD Audio, so now when I press pause video pauses but I can still hear sound, when I resume playback, I get double audio: audio from playback & from live TV. How can I solve this problem.

How many audio sources do you have conneted to your motherboard form the TV tunner card?
When i first hooked up my Tv@nywhere tunner, I hooked up both the CDout & Line out, from Tunner card to MOBO. this can cuse some audio problems. All the audio input selector realy dose ( ) is changes what input the volume controls use.
you might try to mute the audio you are not useing in the Avanced Volume controle pannel. (try this befor unpluging stuff )
Heath-N-PC

Audio problem under win2000

Similar Messages

Maybe you are looking for