Audio problem with firewire to thunderbolt adapter
I am running four channels of audio from a Yamaha Motif synthesizer into a new iMac using the firewire to thunderbolt adapter and recording to Logic. I get very loud distortion. I unplug the same cord and remove the adapter and run the same audio into my 2011 MacBook Pro and record the audio with no distortion. I can run MIDI into the iMac using the adapter with no problem. What gives?
The iMac has three USB and three Thunderbolt. The Yamaha has Firewire out which carries 16 channels of audio. It works great with my MacBook Pro, but the Thunderbolt Converter seems to mess it up. It's fru
strating having bought a brand new iMac and not being able to use it to record. Now when I try to record a single channel of piano, Logic starts blinking on and off, alternating with whatever window is behind it. This is doubly frustrating.
Similar Messages
-
Firewire audio problems with OS X 10.5.6
Hello,
I’m experiencing audio problems with Firewire 400 on my Macbook running Mac OSX 10.5.6.
I’ve got a 2.4Ghz IntelCore 2 Duo with 4 GB RAM and 59 GB available on the internal HD.
It’s hooked up to a brand new Mackie D.4 mixer with 2 Firewire outputs. The problems occur on both Firewire outputs.
I’ve installed automatically from the software update (which I will never do again) to 10.5.6. I never tried the D.4 with 10.5.5 so I can’t tell if the problems occur there also.
The main problem is that after a couple of minutes of recording the sound starts to break up and get really distorted. After a while the sound comes back again.
The second problem is that Soundtrack Pro or Audacity don’t get any audio input from the D.4, although audio input is clearly visible in System Preferences – Sound.
The only sound program that works with all 14 Firewire channels is Ableton, but also in Ableton the distortion occurs.
An example of the distortion can be checked here:
http://media.kaalslag.com/firewire-distortion-problem-mackieD4+Macbook.mp3
I’ve roamed several forums and sites to solve the problem and I tried these solutions:
I updated again to 10.5.6. with the full combo download from the Apple site. Restarted. Problem still there.
I shut Airport off, because lots of sites mentioned problems with Airport conflicting with audio/firewire. Didn’t work.
I did the work around with shutting the Macbook off, disconnecting the D.4, restarting the Macbook, opening Audio/Midi Setup, connecting the D.4 again, toggling the format frequencies a couple of times. Again, no use.
Right now I’m using my “old” Macbook again to record from vinyl. This one is still running on OSX 10.4.11. No problems so far.
I’ve had the distortion problems occuring before with an USB interface. Hoped that the Mackie Firewire would solve the problem, but it seems now that there’s a serious audio Firewire problem which is still not solved in OSX 10.5.
Any help, tips and/or a work around would be much appreciated. Thanks!You could try using another computer in Target Disk mode (as an "external HD"), or you can connect the firewire cable and disconnect all other network cables (turning off airport). Then on each computer go to the "Network" system preferences and select "Built-in Firewire" from the list of ports and choose "Manually" from the drop-down menu next to "Configure". Enter the following IP addresses and subnet masks, apply the changes.
_Computer 1_
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
_Computer 2_
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
After those ip addresses are entered and you've clicked "Apply", ensure that for both computers you have file sharing enabled (done in the "Sharing" system preferences), and then check the Finder sidebar to see if the computers can see each other (their names should appear under "Shared" in the sidebar--if not, try restarting).
If the computers dont appear (even after restarting), using the "Connect To" option that's available in the Finder's "Go" menu. In there, to connect to another computer enter it's IP address as follows:
afp://IP_ADDRESS
If you're on the computer with the ip address of 192.168.1.1, you would enter 192.168.1.2 as "IP_ADDRESS". The "afp" is the protocol (just like "http" for web), and stands for "Apple Filing Protocol"...Apple's file sharing protocol. -
I am buying an audio interface with Firewire output, would I feed this into Firewire,USB or Thunderbolt for Garageband?
I don't have a H4 but do have a H2. Did you set the H4 as a audio interface, after you plug it in choose interface in the H4 screen?
Did you choose the H4 input channel in the track info? -
Mac Pro Early 2008 problems with firewire 400 drives
I am having some sporadic problems with firewire 400 drives and am trying to figure out my best options going forward. System 10.5.2 has hung on me twice in the first week of use, and each time I noticed from console there were some problems accessing one or more of these drives (even though I wasn't doing any reads/writes to/from them). Just before one of the crashes, Disk Utility also had problems "seeing" these drives. My external firewire drives are:
Maxtor OneTouch III 750GB
Acomdata enclosure/Seagate 400GB
LaCie d2/160GB
LaCie w/Lightscribe DVD
I have this "cobbled" arrangement because I just upgraded from an eMac and needed these drives to manage video files, audio files, photos, etc. While I'd love to go out and buy new internals to install in my spare bays, and migrate the data to them, I will have to do that in stages as my budget is tapped out at the moment. My MacPro is the base version of the early 2008 units, with 300GB internal.
In the interim, is it worth troubleshooting firmware updates for these externals, or am I destined to continue to have firewire problems? Is there a straight-forward/inexpensive way to remove these drives from enclosures/install in drive bays with an adaptor? I believe the external hard drives are all ATA type drives.
Thanks in advance for any counsel.I would assume that the Maxtor may be SATA. Does it have an eSATA port? Also, there were a lot of threads (in OS X Leopard forum) about those OneTouch units. Same can be said for LaCie problems.
Yes, check for firmware and configuration. In some cases, and what I do with any new OS, is to reformat all drives - gradually. Given the age of the eMac I'd guess firmware is out of date, and that the drives are formatted some time ago. While you don't have to use GUID, it is a good idea eventually, or just reformat a drive.
Don't forget to test your drives with Disk Warrior (4.1) also.
750GB WD Caviar is $139 SATA.
http://eshop.macsales.com/Specials/XLR8YourMac.cfm?Criteria=&sort=&man=Western%2 0Digital
Are you using daisy chains? you have one FW bus shared by front and back ports. Do you have any on FW800 or using FW400 to FW800 adapter cable? PCI Express FW400 card might even help a little.
Never had trouble with OWC enclosures:
http://www.macsales.com/firewire/ -
I want to transfer data from my old Mac book pro to my new one using migrate. The old computer doesn't have Thunderbolt 2 and the new one doesn't have Firewire 800. Does the Thunderbolt to Firewire or the Firewire to Thunderbolt adapter work to connect them and transfer data?
Thank you!Yes, use a Firewire cable and the FW to Tbolt adaptor.
-
VGA problem with FiFA 2003 and Audio Problem with NHL2003
i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway...... -
Is there a possibility to connect an external thunderbolt hard drive to my iMac (originally Leopard 10.5.8. upgraded to Snow Leopard 10.6.3) via firewire to thunderbolt adapter, as my Mac doesn't have any thunderbolt, but has two firewire entries?
Would like to use the hard drive's big data stocking capacity of 8TB, but actual WD-HDDs of such a capacity have no more other entries than thunderbolt.Basically, no. The Thunderbolt-Firewire adapter does not work "in reverse," meaning, you have to have a Thunderbolt port on your Mac in order to use it.
Most Thunderbolt drives that I have seen also have a USB 3 port. You could use that, but on on an older Mac that does not have a USB 3 port you will be limited to USB 2 speeds. -
USB audio problems with 2013 iMac
I'm having a strange audio problem with USB microphones and headsets. The issue with my Logitech H650e is shown in this screencast I recorded. In the first part of the screencast, I am not speaking into the mic—yet you can see the levels fluctuating as if there is static playing (not in a natural pattern that you'd see when someone is speaking). In the next part of the video I demonstrate that selecting the built-in iMac mic for input, and then re-selecting the Logitech headset temporarily solves the problem. You can see the input start to fluctuate normally as it should when I am speaking. But at 0:31 in the screencast, you can see the input levels freeze and stop registering anything. I continued to speak until the end of the screencast, but no input was detected. For this screencast, I was on a Go To Webinar call, but the problem occurs regardless of whether I'm using Skype, Go To Webinar, GarageBand or any other software.
The problem with my Blue Yeti USB microphone is also different. In that case, the input does not freeze as it does with the Logitech headset. The levels appear as you would expect, and it seems to work. However, the person on the other end can hear static in the background, even though I don't hear it in my own headphones. I learned this because I just tried to do a Skype interview with the Blue Yeti, and the interviewer told me they could hear static. We closed Skype and called each other back twice, but the problem persisted. Then, suspecting the problem was related to what I described above with the Logitech, I unplugged the Yeti and then plugged it into my Macbook Air 2013 (also running Mavericks). Lo and behold the static completely disappeared.
My Griffin iMic and Audio Technica lavalier mic (attached to the iMic) behaves similarly to the Yeti, except in this case I can hear the static when I speak with my monitoring headphones. The input works but I get a lot of cracking and static in the background. This was confirmed by calling the Skype Test Call number and recording a message, which is then played back.
Here are the facts:
All 3 of my USB audio microphones/headsets do not work with my 2013 iMac running Mavericks
All 3 of these microphones/headsets worked fine with my 2008 Mac Pro running Mountain Lion
All 3 of these microphones/headsets work fine with my 2013 Macbook Air running Mavericks
In this other thread, several people are reporting similar issues with the iMac 2013 and Mavericks. At least two people did not have the issue when the iMac 2013 was running Mountain Lion. This of course suggests the issue is the combination of the iMac 2013 and Mavericks.Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems. -
When sending voice messages using Cloudtalk, the recipient hears only garbage. I contacted Cloudtalk technical support, and it appears that the 3gp file sent by the phone is not recognized. This problem is known by them, and happens only on Droid/X.
Anyone else is experiencing audio problems with the droid/x?That doesn't sound like an audio issue with the X, it sounds like a compatibility issue between the X and the service.
-
Hello all, I'm having audio problems with my FiOS set top box. When I start to change channels I lose audio and can't get it back unless I turn the TV off/on or I change the HDMI source on my TV . Seems after changing a couple of channels the problem happens. I've tried the in home agent auto correct, and different HDMI cables. I have a Westinghouse TV and I'll try a firmware update for the TV and see if that fixes it. Any fix for this and the possibility that it might be the set top box ? I just got FiOS and all is going well besides this issue. Seems that the other STB that are model # 335 aren't having this problem.
Some TVs have had issues with the HDMI handshake and the Audio. You may be required to use the separate bulkier HD Component cables with separate audio cables. Or try it as a solution on that TV.
I have CHS 435 DVR on a Samsung, and 2 CHS 335s on different model Vizio TVs, all with HDMI, and no issues. Others have reported different issues. I did a search here with the following results. Perhaps this information will help.
http://forums.verizon.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3AFi... -
Audio Problems with some HD channels (HBO mostly)
I'm experiencing sporadic audio problems with a handful of HD channels. Most noticably on HBO.
When the audio is output through the television itself, it sounds OK... however if the audio is output through my home theater receiver and speakers, I can hear a lot of static and "crackling" on certain movies and shows.
The issue isn't the home theater setup, as I have several other components that use it (AppleTV, Bluray, Xbox, etc.) and the audio sounds perfect from them.
The only device that displays that poor audio is the FiOS Set Top Box and even then it's only on a few channels.
I thought maybe that the optical audio cable between the set top box and the receiver may have been bad, so I replaced that. Same problem even with the new cable.
The problem is either with the Set Top Box itself or the audio levels on the stream from the channel provider.
Has anyone experienced anything similar to this, and if so... did you resolve it somehow?
Any help you could provide would be most appreciated.
Thanks!Check the following.
Help & Settings > Settings > Entitlement Information
Here are possible entitlements mapped to channels.
101 - 104 : PSB HD
407 - 433 : Essential Extra / Unlimited Extra
446 - 453 : HD Extra
501 : Sky Sports 1
502 : Sky Sports 2
507 - 509 : BT Sport SD
510 - 512 : BT Sport HD
513 - 514 : Essential Extra / Unlimited Extra
530 - 540 : Sky Movies
555 - 563 : Kids Extra
You need 'HD Extra' for channels 446 - 453. I have the free 'BT Sport HD' but that does not cover entertainment HD channels. You need to subscribe to the HD Extra bolt-on for £3 for them. Have you ordered HD Extra (it only became available from last Sunday)? -
Problem with FireWire audio interface (Edirol FA-66)
I am experiencing the following problem with my FireWire Audio interface via Edirol FA-66. At unpredictible moments the 'Digital In' LED starts blinking, and after that the audio signal stops working. I do not know if Logic is the culprit, since it also happens now and then with iTunes
Note: there are digital in/outs connected.
Only shutting down the Edirol and restarting the iMac G5 resolves the problem, be it only temporary: after a while the phenomenon shows up again.
Extremely ennoying.
What could be the culprit?
Bonkie
Belgium
EarthHi Patrick, I don't know that specific interface but could it possibly be that the flashing LED also act as an alert for when the firewire connection has gone down?
Reason I suggest this is I have the same thing from with my iMac & focusrite saffire Le, where i lose audio now & then, & when it happens if i check in the interfaces software control panel it always has a 'firewire connection error' - I then just have to unplug & replug-in the interface to re-establish the firewire conection. Just a thought but maybe it's worth consulting the edirol manual/tech support to see if this is the case ref the LED function?
Adam -
FCP Problem with Firewire output to external monitor and speaker ???Help
i have a g5 powermac. the problem is when using Final cut pro 4hd. when i output my work through firewire to my external monitor and speaker i have a problem with the audio signal. Theres feedback/noise/hiss from the speakers. The firewire connects to DSR-11 vtr deck which feeds my monitor and speakers. it only happens when in FCP is set to A/V firewire output. does not happen if Video output is not set to firewire.
I Diagnosis is that it is not my dsr-11 deck or firewire i've ruled those out. The problem is either FCP software or Hardware problem with my G5
Does anyone have a similar problem. please respone, i will try to answer any respones,
Thanks
powermac g5 powermacCaptM
From the firewire that feeds the dsr-11. on the output, i use s-video cable to my monitor (sony pvm-14l) and High Quality rca cables thet feed the audio to the Roland Speakers.
I've changed all wires and still have audio problem. I,ve changed my Dsr-11 deck to my camcorder and still have the problem.
If any of u guys use FCP The problem happens When I select view> external Monitor > and select firewire for Audio/ and video. I have never changed my editing habits, something just went wrong with the signal, I think its a Hardware problem with the firewire connection. I'm Going to have to bring this to a Apple Service Center In my local area one day. -
How to connect via Firewire/Thunderbolt adapter an Epson Stylus Photo R2400 printer to a new Mac Pro
When you switch from USB to FireWire, you have essentially installed a new (i.e., different) Printer.
In the Add-a-Printer dialog, delete[-] the existing Printer queue which is set up for USB. Then, with the Printer connected via FireWire, Add [+] a new Printer queue and it should set it up correctly this time.
To go back to USB, you would have to delete and re-add in a similar fashion later. -
Audio problems with a USB turntable using Linein, right channel not playin
I have an Audio Technica usb turntable and I am using Linein software to get the audio in. I am now missing the right channel. I use the USB connection and I have tried different cables so that is not the problem. I also tried using the RCA cables, plugged into the micro phone/line-in port via an an RCA to single stereo adapter up which did not solve the problem either. In fact when I switched the red white, left right cables the sound still only came out from the left channel and subwoofer. Both channels work fine with Itunes so it is not the speaker system. I am thinking that it is a setting problem with the software either the Linein or Mac OS. Does anyone use Linein and what settings should I be looking at, Midi settings, Sound preferences? Thanks.
Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
Maybe you are looking for
-
How do I create a new document that is 8" X 8" and with Print as the document profile?
Page 47 in Chris Botello's Adobe Illustrator CS6 of Cengage's Illustrated Series asks this for the Independent Challenge for Unit B. "Create a new document that is 8" X 8" and with Print as the document profile." As long as its CMYK it's "Print". Ri
-
How can I set the reference line in a graph
Hello together, I would like know if it is possible to set the Reference Line Value as a variable Example: "<ReferenceLine index="0" visible="true" value=variable sql-statement displayedInLegend="true"/>" My problem: I need a combined graph with a st
-
Hi, I have unchecked the activated checkbox for one query in POWL_QUERYR. I do not want the query to become visible to users. I have done the changes in Development and found that it becomes invisible to an user only if I delete all entries for the p
-
Does EEM support action cli command "set clock hh:mm:ss Mmm dd yyyy" ?
conf t no event manager applet TEST event manager applet TEST event snmp oid 1.3.6.1.2.1.1.3.0 get-type exact entry-op gt entry-val "0" poll-interval 6 action 001 cli command "clock set 00:00:00 Jan 1 1994" end show clock
-
Transports on system landscape with no test environment
Hi, Please share your experience about transporting from BWD to BWP. I have normally worked with BWD, BWQ, BWP, where we have the chance to test our transports on BWQ before moving the perfect changes to BWP. What precautions should I take when worki