Audio problem with win xp sp3 black edition

Product Name-Hp Pavilion g6-1318AX
I've recently installed the win xp sp3 black edition.All the drivers are working but there is a problem in recognizing the sound hardware...I have tried installing many IDT HD drivers but its not working...On the properties of IDT HD audio hardware it shows a s follow..
Device not working..error(code 10)
Plz help me Sir/Madam.
Thanking You.

Hi:
You probably won't be able to get the audio to work in XP on your model.
If you did not first install the Chipset driver and Microsoft Universal Audio Architecture (UAA) Bus Driver for High Definition Audio before you attempted to install any of the audio drivers you tried, then that is part of the reason nothing is working.
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=0&...
You may have to start from scratch and install XP if you can't uninstall the audio drivers you tried.
You can also refer to this guide, read the audio info listed under the Difficult Models section, and hopefully one of those suggestions will work for you.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-e-g-Windows-8-and-Software/General-XP-Downgr...

Similar Messages

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

VGA problem with FiFA 2003 and Audio Problem with NHL2003

i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...

Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway......

Firewire audio problems with OS X 10.5.6

Hello,
I’m experiencing audio problems with Firewire 400 on my Macbook running Mac OSX 10.5.6.
I’ve got a 2.4Ghz IntelCore 2 Duo with 4 GB RAM and 59 GB available on the internal HD.
It’s hooked up to a brand new Mackie D.4 mixer with 2 Firewire outputs. The problems occur on both Firewire outputs.
I’ve installed automatically from the software update (which I will never do again) to 10.5.6. I never tried the D.4 with 10.5.5 so I can’t tell if the problems occur there also.
The main problem is that after a couple of minutes of recording the sound starts to break up and get really distorted. After a while the sound comes back again.
The second problem is that Soundtrack Pro or Audacity don’t get any audio input from the D.4, although audio input is clearly visible in System Preferences – Sound.
The only sound program that works with all 14 Firewire channels is Ableton, but also in Ableton the distortion occurs.
An example of the distortion can be checked here:
http://media.kaalslag.com/firewire-distortion-problem-mackieD4+Macbook.mp3
I’ve roamed several forums and sites to solve the problem and I tried these solutions:
I updated again to 10.5.6. with the full combo download from the Apple site. Restarted. Problem still there.
I shut Airport off, because lots of sites mentioned problems with Airport conflicting with audio/firewire. Didn’t work.
I did the work around with shutting the Macbook off, disconnecting the D.4, restarting the Macbook, opening Audio/Midi Setup, connecting the D.4 again, toggling the format frequencies a couple of times. Again, no use.
Right now I’m using my “old” Macbook again to record from vinyl. This one is still running on OSX 10.4.11. No problems so far.
I’ve had the distortion problems occuring before with an USB interface. Hoped that the Mackie Firewire would solve the problem, but it seems now that there’s a serious audio Firewire problem which is still not solved in OSX 10.5.
Any help, tips and/or a work around would be much appreciated. Thanks!

You could try using another computer in Target Disk mode (as an "external HD"), or you can connect the firewire cable and disconnect all other network cables (turning off airport). Then on each computer go to the "Network" system preferences and select "Built-in Firewire" from the list of ports and choose "Manually" from the drop-down menu next to "Configure". Enter the following IP addresses and subnet masks, apply the changes.
_Computer 1_
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
_Computer 2_
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
After those ip addresses are entered and you've clicked "Apply", ensure that for both computers you have file sharing enabled (done in the "Sharing" system preferences), and then check the Finder sidebar to see if the computers can see each other (their names should appear under "Shared" in the sidebar--if not, try restarting).
If the computers dont appear (even after restarting), using the "Connect To" option that's available in the Finder's "Go" menu. In there, to connect to another computer enter it's IP address as follows:
afp://IP_ADDRESS
If you're on the computer with the ip address of 192.168.1.1, you would enter 192.168.1.2 as "IP_ADDRESS". The "afp" is the protocol (just like "http" for web), and stands for "Apple Filing Protocol"...Apple's file sharing protocol.

USB audio problems with 2013 iMac

I'm having a strange audio problem with USB microphones and headsets. The issue with my Logitech H650e is shown in this screencast I recorded. In the first part of the screencast, I am not speaking into the mic—yet you can see the levels fluctuating as if there is static playing (not in a natural pattern that you'd see when someone is speaking). In the next part of the video I demonstrate that selecting the built-in iMac mic for input, and then re-selecting the Logitech headset temporarily solves the problem. You can see the input start to fluctuate normally as it should when I am speaking. But at 0:31 in the screencast, you can see the input levels freeze and stop registering anything. I continued to speak until the end of the screencast, but no input was detected. For this screencast, I was on a Go To Webinar call, but the problem occurs regardless of whether I'm using Skype, Go To Webinar, GarageBand or any other software.
The problem with my Blue Yeti USB microphone is also different. In that case, the input does not freeze as it does with the Logitech headset. The levels appear as you would expect, and it seems to work. However, the person on the other end can hear static in the background, even though I don't hear it in my own headphones. I learned this because I just tried to do a Skype interview with the Blue Yeti, and the interviewer told me they could hear static. We closed Skype and called each other back twice, but the problem persisted. Then, suspecting the problem was related to what I described above with the Logitech, I unplugged the Yeti and then plugged it into my Macbook Air 2013 (also running Mavericks). Lo and behold the static completely disappeared.
My Griffin iMic and Audio Technica lavalier mic (attached to the iMic) behaves similarly to the Yeti, except in this case I can hear the static when I speak with my monitoring headphones. The input works but I get a lot of cracking and static in the background. This was confirmed by calling the Skype Test Call number and recording a message, which is then played back.
Here are the facts:
All 3 of my USB audio microphones/headsets do not work with my 2013 iMac running Mavericks
All 3 of these microphones/headsets worked fine with my 2008 Mac Pro running Mountain Lion
All 3 of these microphones/headsets work fine with my 2013 Macbook Air running Mavericks
In this other thread, several people are reporting similar issues with the iMac 2013 and Mavericks. At least two people did not have the issue when the iMac 2013 was running Mountain Lion. This of course suggests the issue is the combination of the iMac 2013 and Mavericks.

Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.

Audio problems with Droid/X

When sending voice messages using Cloudtalk, the recipient hears only garbage. I contacted Cloudtalk technical support, and it appears that the 3gp file sent by the phone is not recognized. This problem is known by them, and happens only on Droid/X.
Anyone else is experiencing audio problems with the droid/x?

That doesn't sound like an audio issue with the X, it sounds like a compatibility issue between the X and the service.

Audio problems with CHS 435

Hello all, I'm having audio problems with my FiOS set top box. When I start to change channels I lose audio and can't get it back unless I turn the TV off/on or I change the HDMI source on my TV . Seems after changing a couple of channels the problem happens. I've tried the in home agent auto correct, and different HDMI cables. I have a Westinghouse TV and I'll try a firmware update for the TV and see if that fixes it. Any fix for this and the possibility that it might be the set top box ? I just got FiOS and all is going well besides this issue. Seems that the other STB that are model # 335 aren't having this problem.

Some TVs have had issues with the HDMI handshake and the Audio. You may be required to use the separate bulkier HD Component cables with separate audio cables. Or try it as a solution on that TV.
I have CHS 435 DVR on a Samsung, and 2 CHS 335s on different model Vizio TVs, all with HDMI, and no issues. Others have reported different issues. I did a search here with the following results. Perhaps this information will help.
http://forums.verizon.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3AFi...

Audio Problems with some HD channels (HBO mostly)

I'm experiencing sporadic audio problems with a handful of HD channels. Most noticably on HBO.
When the audio is output through the television itself, it sounds OK... however if the audio is output through my home theater receiver and speakers, I can hear a lot of static and "crackling" on certain movies and shows.
The issue isn't the home theater setup, as I have several other components that use it (AppleTV, Bluray, Xbox, etc.) and the audio sounds perfect from them.
The only device that displays that poor audio is the FiOS Set Top Box and even then it's only on a few channels.
I thought maybe that the optical audio cable between the set top box and the receiver may have been bad, so I replaced that. Same problem even with the new cable.
The problem is either with the Set Top Box itself or the audio levels on the stream from the channel provider.
Has anyone experienced anything similar to this, and if so... did you resolve it somehow?
Any help you could provide would be most appreciated.
Thanks!

Check the following.
Help & Settings > Settings > Entitlement Information
Here are possible entitlements mapped to channels.
101 - 104 : PSB HD
407 - 433 : Essential Extra / Unlimited Extra
446 - 453 : HD Extra
501 : Sky Sports 1
502 : Sky Sports 2
507 - 509 : BT Sport SD
510 - 512 : BT Sport HD
513 - 514 : Essential Extra / Unlimited Extra
530 - 540 : Sky Movies
555 - 563 : Kids Extra
You need 'HD Extra' for channels 446 - 453. I have the free 'BT Sport HD' but that does not cover entertainment HD channels. You need to subscribe to the HD Extra bolt-on for £3 for them. Have you ordered HD Extra (it only became available from last Sunday)?

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

Apple guarantees their work, take it back.

Right mouse click problem on T60p with WIN-XP SP3

I have T60p model. After upgrading my WIN-XP to SP3 i am facing problem with Right mouse click. Right mouse click starts working as left click. Initially when I reboot my machine it works fine but after sometime I start getting above mentioned problem. I even installed the latest mouse drivers(ultranav) from Lenovo site. Has anyone got this same problem? Looks like Lenovo should fix this problem.
Thanks in advance.

This isn't necessarily a driver problem, and it's not necessarily Lenovo's problem.
The primary and secondary mouse buttons can be switched by a program you are running, although it wouldn't seem that this is very likely.
Windows Start Menu | Settings | Control Panel | Mouse. This will take you to the Mouse PropertiesTabbed Dialog. Click on the Buttons tab. There you can see if the primary and secondary buttons are truly switched. If so, you can switch them back, without rebooting the machine.
Centex

4.2 Installation Problems on win xp sp3

4.2 installer.vbs fails right on start on my desktop running win xp sp3.
the message i get is
Windows Script Host
Script: install\bin\engine_wrapper.vbs
Line 242
Access is denied
Code 80070005
Source: WshShell.Exec
I am not a windows administration guru, anybody has an idea how i grant the
installer enougth permissions? It so sad i am stuck at this stage of trying OpenMQ
PS: vbs - what a great choise for Sun installer :(
PPS: 4.1 does NOT crash! it shows the logo screen with 'Initializing...' message - and keeps showing it forever with a running bar...
Edited by: arro239 on Aug 30, 2008 4:10 AM

java_home is set to a 1.6 JDK ?
This reminds me of this issue in the OpenInstaller framework that our installer is based on:
[http://bugs.sun.com/view_bug.do?bug_id=6599144|http://bugs.sun.com/view_bug.do?bug_id=6599144]
I'm curious if this is what you are seeing. Basic issue here is that the 4.2 installer can't run on JDK 1.6; it needs a JDK 1.5. This doesn't mean that the MQ broker and runtime cannot run on 1.6 - it's the installer that has an issue with it. This problem was addressed post MQ 4.2.
The installer is shipped with a JRE 1.5 for the installer to use, under mq4_2-installer/jre - and it uses this by default.This can be overriden by specifying '-j <path to JVM>' - which I assume you are not doing. I just looked at the VBS script to see how JAVA_HOME affects it - by default, JAVA_HOME should not be the place where it picks up the java runtime - the default should always be mq4_2-installer/jre.
To see if this is the issue, can you explicitly run the installer on the bundled mq4_2-installer/jre eg
installer.vbs -j jre
(assuming the above is run from the mq4_2-installer folder)
... or point it to a JDK/JRE that is JDK 1.5 ?
regards,
-i
PS
How did you get rid of the permission denied error ?

Problem with wine and Tony Hawk Pro Skater

Hi, I 've installed sucessfully Tony Hawk 4, but when i execute Start.exe:
[antonio@laptop ~]$ wine .wine/drive_c/Archivos\ de\ programa/Aspyr/Tony\ Hawks\ Pro\ Skater\ 4/Start.exe
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
fixme:msg:pack_message msg 14 (WM_ERASEBKGND) not supported yet
my graphics card is Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller, and maybe should install a module for it works with wine.
The window where you start all options configuration appears to me, but when I go to Play THPS4! showed me the error. The version of my wine is wine-1.1.8. I don't know if I have to install any shape or form over any other option in winecfg.
thanks
Last edited by trancos83 (2008-11-10 20:19:44)

Can you try it on a desktop comp using arch and wine instead? Maybe it's a graphics problem? Anyway, I've checked the min req. and it's quite low..
Please check this site if your game is supported or if ever you want to play another game in the future.
http://appdb.winehq.org/

Problem with Wine, NVidia and fullscreen games

Hi,
I'm writing about a problem i recently noticed with wine, nvidia gpu and fullscreen 2d games.Basically the problem is as follows - i am running arch with the latest kernel and nvidia drivers on Thinkpad T61 with NVidia Quadro NVS 140M. I have a problem with old 2d games like Red Alert 2, Baldur's Gate, Icewind Dale, Diablo 2, Heroes 3. All of these games do not support the native 1440x900 resolution of my screen and all of them work fine in window mode but crash if fullscreen is selected. I managed to get some of them working by making them work at higher resolutions. For example although Red Alert 2 does not support 1440x900, it can be easily made to work at that resolution and after i applied the necessary settings it worked. The same was with Heroes 3 - by default it does not support 1440x900 and it used to work only i window mode but there is a HD mod which allows it to run in higher resolutions and after i applied it it worked perfectly in fullscreen. I haven't thested Baldur's Gate and Icewind Dale but i think it will work there too.
The problem is that i cannot use this approach to all games - for example i must run Diablo 2 and Starcraft in their original resolutions. I read somewhere that the problem is that wine can only change between the resolutions described in the xorg.conf file and if doesn't find the necessary resolution the game will crash or will only take the portion of the screen that is its resolution - for example when i play Starcraft rather than stretching it to the whole screen it simply takes 640x480 pixels of my screen and the game is displayed in the top left corner of the screen leaving everything else black.
I didn't have this problem before - it is something new though i'm not sure since when do i have the problem because i rarely play games. As for the idea that the problem may be related to the resolutions defined in the Xorg.conf file, my xorg.conf is automatically generated by the nvidia installer and there are no resolutions defined there.

brebs wrote:
Try nvidia 304.48
I remember that issue, with the 302 series.
I have Nvidia 304.48 installed and the problem still exists (it also happens with Catalyst). This didn't occur with 295.59 using the same version of Wine.
https://bbs.archlinux.org/viewtopic.php?id=55145
https://bbs.archlinux.org/viewtopic.php?id=147073

Weird audio problems with Motion when exporting quicktime videos

I have a Motion project with 2 video clips of people talking. When I create a RAM preview everything plays back fine. When I export a quicktime, the first second or so of each video clip (within the quicktime) have no audio. I've adjusted the in and out of each clip in Motion but I don't think that would make the audio disappear on export. Thinking it was just a bad export, I tried just exporting the audio and the same thing happens.
Here's what i'm using:
Mac Pro dual 3.0 Xeon
10 gigs of RAM
Motion 2.1.2

hi,
motion 2 had some odd audio problems that surfaced now and then. The only way round it was to bring the clip into FCP and edit the audio in there, and then export from fcp.
Motion 3 might have fixed this. Not sure havent had the problem for some time, since I make sure all finnishing is done in FCP.
hope this helps
adam

ITunes 10 not compatible with Win XP SP3?

My wife's Dell is running Win XP (32 bit) with SP3, has most of the recent Microsoft security updates, MS Office 2007, and the 2011 version of McAfee. It is rather "plain vanilla" in its configuration, so I don't expect any conflicts with the Win version of iTunes.
With iTunes 9.2.1.5, her computer & iTunes work fine. I thought I'd try the suggested upgrade to iTunes 10.4.1. It downloaded and installed OK. However, upon the next reboot of the computer, ended up at the black screen and could only restart in safe mode. Repeated restarts, only could get to safe mode though.
I restored her computer from a disk image, and it ran fine until I tried to upgrade to iTunes 10.4.1 again ... same thing, can only boot to safe mode. I repeated this process a couple more times with different versions of her system's disk images, all run iTunes 9.2.1.5 OK, but crash with an iTunes 10.4.1 install. I also tried this with and without running Norton Win Dr. & Disk Dr. (not running Norton antivirus, rather McAfee) to clean up the registry and system files, but same results.
Is iTunes 10.x.x only for Vista or Win OS 7? Is there some known Microsoft update or setting that conflicts with iTunes 10.x.x? Does iTunes 10.x.x not play nice with McAfee or any of its security features? Is there some level of Windows security settings that could cause this?
I'm OK with iTunes 9.2.1.5 for now, but don't want the next Apple device that requires a newer iTunes version to break her computer. We wish to stay at Win XP SP3 as both our work computers use XP and our same current level of program revisions, so we don't want new issues (plus time & cost) going to Win 7 just for the sake of iTunes 10.
Thanks in advance for any thoughts.
PS: I personally use a MacPro at home, but that is not a current option for my wife (just saying this in advance for those who's fix will be to "get a Mac" :-)

Why not update your OS to 10.6?

Audio problem with win xp sp3 black edition

Similar Messages

Maybe you are looking for