Audio problems after 2.1

Since the 2.1 upgrade, the sound from the right channel of my first gen ipod touch is fading in and out (mostly out). The left channel is fine.
I have checked my headphones in other devices and used other headphones , so they are not the problem.
I have tried a restore from iTunes and removing extra apps and it still happens.
Any ideas how to fix this?
Thanks

It's probably coincidental that you may have gotten a little bit or dust or dirt in the headphone jack at the same time you updated. Try blowing it out with some compressed air, then plug your headphones in to see if that worked. If it didn't, then chances are that you somehow ruined the right channel in your iPod's audio jack. If you are still under warranty, you might want to try calling Apple and explaining your situation.

Similar Messages

  • I have Audio problems after 6.1.2 update. What do I do?

    Is anybody else having audio problems after updating to 6.1.2? How do I Fix it?

    No problems here.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Audio problems after battery drained

    Well, my ipod shuffle 2nd gen was working perfectly well. I'm sorry that I left it completely still in my desk for nearly a month... (No one ever touched it during that month)
    After that time, I connected it to my computer, it needed a while (about 5 minutes) before my PC recognized it. iTunes recognized my ipod too, and I can sync music, copy files to and from my ipod. The problem was, when I plugged in the ear-phone, no sound came from my ipod, only some kind of weird noises. At first, I thought it would be my ear-phone's problem, but I tested it carefully with my other Music devices. I'm pretty sure the audio jack had problem, because I could hear disturbed music on my ear-phone. My questions are, why can the audio jack have problem after a month with no-one touch the ipod, and is there any solution for my problems? (I really don't want to use it as a 1GB flash disk...)

    what kind of speed changes do you mean? If you mean using some clips in slo-mo (with the sound dropped out) then yes I used a LOT of them... but they are also working fine for the first several minutes...

  • Audio problems after exporting out of iMovie

    Aloha!
    I have a 48 minute movie created in imovie with lots of audio, clips and transitions. It works perfectly when I preview or play it in iMovie. When I try to share it to iDvd, export to iDvd, or to save it as a Quicktime movie, it looks great for several minutes, then the audio tracks get messed up. The correct audio is there, but overlayed on it is snippets from farther into the project, or whole tracks from later in the project, or places where the audio drops out completely. I spent about 70 hours creating this movie and really want to burn it to DVD so I can play it on the big screen. I did burn one version to dvd, and it looked and sounded great - until the audio problems began... any help would be greatly appreciated.
    In Garage Band there is a feature where you can consolidate your bits into one track - should I be doing something in iMovie after I finish it before I export it?

    what kind of speed changes do you mean? If you mean using some clips in slo-mo (with the sound dropped out) then yes I used a LOT of them... but they are also working fine for the first several minutes...

  • Iphone 4 audio problems after ios6 upgrade

    I have problems after upgrade to IOS 6.
    The sound mute and i can't up it.
    It's the same behavior that appear at the next video:
    http://www.youtube.com/watch?v=WZW5kcLyuHs

    thejennshin wrote:
    I recently upgraded my iphone 4 to ios6 on wifi. My laptop charger has been broken for a while so i havn't been able to sync my iphone to my itunes or back it up in any way. Now that the ios6 upgrade is done, my phone completely turned off and is now showing on the screen to plug in my phone to itunes.
    DESPERATE, i am back on my laptop with a borrowed charger and i plugged my phone into itunes. It now says i have to restore it back to factory settings. Meaning, i will lose all of my contacts, pictures, etc. because i havn't been able to back it up onto my laptop.
    I definitely don't want anything deleted off of my phone. Did any body else have this problem? Is there ANYTHING i can do to refrain from restoring it and losing all of my memory?
      Couldn't you have backed it up to the "iCloud"? or some other cloud based storage before you did the upgrade? If you do not back things up before you upgrade your OS, you are only asking for things to go wrong.

  • Audio problem after rendering!

    Hi everyone! I am having a problem with sound in my project after rendering. I am using Adobe Premiere CS2 , and in Audio track 1, I have someone speaking, and in track 2 I have backround music. When I play it back in the window, together it sounds perfect. After rendering, the voice becomes very crackly and distorted. I have tried rendering just the voice without the backround music, and it sounds perfect. It seems the addition of backround music is causing the distortion to the other track. I have tried rendering the backround music seperately and adding it in, but still the problem persists. I adjust the music so that when the kids are talking, the music dips down, and when they are not, I leave it at it's normal level. HELP..I am losing my grip on this one! Thanks so much....Tammy

    Tammy,
    If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
    While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
    Glad that you got things toned down.
    Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
    Good luck,
    Hunt

  • Audio problems after exporting

    I have created a 43 minute iMovie with very, very heavy editing.
    I love my movie, and until recently, it would play back fine within the application.
    (but now, not even this works for me anymore.)
    When I export the movie in any format, My audio gets all mixed up.. Random audio clips from other parts of the movie are heard with, or substituted during other parts. It is so frustrating after so much hard work.
    Is there any way to resolve this problem without having to start from scratch?

    Dito! I just worked for months on 45 min movie and the same problem. And the answer is WHAT?!!!!!!!!!!!!!!!!!!!!!!!!!!!!! whats the piont of beat markers and the ability to use all these things and now i have to WHAT??????? go back and try to re edit the speeds? Great I switched to an Apple only to find out BIG mistake. I cannot believe this has not been fixed. Whata joke! I have to get this DVD in the hands of someone by the end of the weekend that might be able to change my life and i have made a GRAVE mistake in intrusting it in a MAC

  • Ipad 2 audio problem after updating to 8.1.2

    Immediately after updating my ipad2 to version 8.1.2, the audio is distorted.  Even the key clicks are distorted.  I've reset the ipad, I've restored the ipad.  No luck.  Anyone else having this problem?  Any suggestions ?
    Thanks

    Actually, I found out what to do: The mono button under accessibility needs to be toggled on and then off again.
    I asked Siri who provided some good links from when the problem happened with version 7.

  • [solved] audio problem after update

    hi, after the kernel update of yesterday i have a problem with my audio. after a reboot, my audio is totally absent. i have saw that the pulseaudio process is present and activate, and all graphically is ok (all indicators works well). the strange thing is that if i put headphones and then i releave them, all magically works normally!
    Last edited by blauman (2014-06-19 17:12:06)

    ok i don't need it...i have solved with
    Load equalizer and dbus module on every boot
    Edit the file /etc/pulse/default.pa with your favorite editor and append the following lines:
    ### Load the integrated PulseAudio equalizer and D-Bus module
    load-module module-equalizer-sink
    load-module module-dbus-protocol
    on wiki of pulseaudio...i don't know why, i had already done it in past, but i don't know why on my default.pa there aren't these lines..seems now it works!

  • Audio problems after windows 8.1 update

    My audio volume has gone to barely audible after I went to 8.1 however only for certain things.
    When I try to listen to a vidio clip on Yahoo or other news feeds I can barely hear anything and when I play
    free cell or solitare and make a wrong move the audio warning is just barley audible.
    However when I listen to a Facebook audio it comes booming in as before the upgrade. and when Malware bites
    does a update the signal is very loud
    I re downloaded the realtec audio driver for 8.1 and have gone through all the settings I know about
    and nothing works to help.
    I would go back to the old Windows 8 ( I don't think 8.1 is any better anyway ) but I will loose my
    Microsoft office download and some game downloads I have installed and have to re buy them.
    Any Help ?
    Aloha from Kauai Leon

    rckuehl wrote:
    Model is Satellite E55-A5114, part number is PSKPJU-01K023.
    Not sure when my computer got updated to 8.1, but I started losing audio at some sites around August 2014.
    Bob
    Hi rckuehl.  It may have been caused by installing the Microsoft August 2014 update for Windows 8.1 - KB2975719.
    Try uninstalling the KB2975719 to see if the sound problems go away.  If not, try installing newer Realtek HD Audio drivers as your E55-A5114 laptop uses Realtek audio drivers; original driver for that model was 6.0.1.7026.  The latest Realtek HD Audio driver from Toshiba is version 6.0.1.7329 which was posted 9-25-2014.

  • Audio problems after burn

    I've burned my DVD and the audio works fine throughout with the exception of 2 keynote slideshows I put on the disc. I exported these slideshows as quicktimes through keynote, and the video works fine, however the sound doesn't show up. When you do this with keynote, it seperates the movie into a video and "soundtrack" file. The problem may come from this, however in the preview in iDVD the sound is there. Now I've only got iDVD 5 and I had to save the dvd as a disc image and then burn it to a disc with my third party burner. Should I try the disc image again or should I try and reformat these quicktime (movie) files
    Thanks everyone

    Hi tyler:
    Welcoem! Sorry to burden you with this reading, but unless you are a member you couldn't get to this link.
    http://www.macfixit.com/article.php?story=20060125080748519
    "If you make a presentation which has a background track which plays throughout the presentation (as opposed to per-slide), KeyNote exports it as two Quicktime movies. One contains the movie of the slides (chapter marked). The other contains the soundtrack (and it's named moviename_soundtrack.mov). The first movie references the other, so that they can play synchronously. However iDVD does not import the soundtrack. If you check the asset list, you'll see that it assumes the soundtrack is in the main movie. To make matters more confusing, playing the movie in iDVD works fine. That's because the DVD simulation uses Quicktime to do the playing, and it does the right thing. However, iDVD's failure to recognize the linked movie causes another bug which caused me no end of grief. When viewing a chapter listing page which contains thumbnails, the soundtrack plays! Furthermore, it plays once for each thumbnail. Of course they are slightly out of sync, and the result is incredibly weird. It even plays the soundtrack while it's encoding the chapter sections! Again, the problem is that QuickTime sees the reference, and although iDVD is presumably telling QuickTime not to play the audio track, it doesn't know that QuickTime is playing the linked audio track."
    "I attempted to work around this problem by directly editing the iDVD project plist file and changing the audio soundtrack to point at the correct movie. That sort of worked, but then ran up against the way iDVD does presentations. After each slide is presented, the movie 'stops' on that page. You have to press play to go to the next page. Since it stops, the music stops also. So you end up with a soundtrack that is tied to the presentation, rather than one which plays independently. That makes me believe that a fix may be a while in coming, since it's probably going to require redesigning how iDVD creates presentations. However at the very least, iDVD needs to detect linked QuickTime files and handle them correctly."
    Sue

  • Captivate 3 audio problems after publishing...

    Help please... having problems with audio getting messed up after publishing.  I'm recording all audio w/in Captivate3. When I publish and put on our browser, the audio is missing on some slides, also if you pause for FF the video, the audio sometimes is overlaping, or not in sync.  Any suggestions?
    Thank you
    Bev

    Hey Luke,
    I apologize for not getting back sooner, been swamped at work and I'm
    moving. OK here is my laundry list of bugs and nice to haves:
       - BUG - If I add silence to the beginning or end of a wavelength, it
       gets cut off when I save and close the wavelength. I then have to reopen
       the wavelength and add it back in and save it again. If I don't add silence
       the audio gets cut off when I publish. This has to be done for every slide
       I have and it's very repetitive.
       - BUG - If I create a movie over say 45 slides, the slides bleed into
       one another and images are lost or added to the next slide. If I use Fade
       for the transition it's even worse.
       - BUG - If I use Fade for a transition between slides with characters
       the characters bleed from one slide to the next.
       - NICE TO HAVE - The ability to set Preferences for characters per
       project or for all projects. For example, set the size and duration
       defaults.
       - NICE TO HAVE - It would be nice to have the default tab on the audio
       wavelengths be Edit not Add or Replace. I do a lot of narrating so having
       to click Edit for each slide becomes tedious.
    OK, I want to be clear that I'm not beating up Adobe programmers and I do
    LOVE the tool. It would just be a smoother experience if the above worked
    or were in place. I do also have to add that I love all of the new widgets
    and games!!! Haven't had time to explore them all, but I will soon and I'll
    let you know more when I do. BTW are you sharing these email threads with
    Adobe? Maybe we should put this online, what do you think?

  • Audio problem after ios 7.1 in ipad air

    After updating to ios 7.1 in Ipad air I got the following problems.
    After watching a movie via the video app and switching to home screen, the keyboard click sound is muted and also the lock sound is.
    I tried for the solution by resetting my device 5 times but his didn't work.
    Please let me know anyone has this kind of issue...Please report to Apple to fix this issue in next update.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) http://support.apple.com/kb/ht1430
    Check your settings. The iPads have a small switch on the right edge. http://support.apple.com/kb/ht1430 It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    iPhone: Can’t hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
    To solve some sound problems, just follow these simple steps
    1. Go to Settings
    2. Tap on General
    3. Tap on Reset
    4. Tap on Reset All Settings
    What this effectively does is to reset some of your Settings to factory default. It’s not a complete removal of settings. It removes all of your preferences for Wi-Fi, Bluetooth, Do No Disturb, Notifications, General, Sounds, Brightness & Wallpaper and Privacy. It doesn’t affect your data. All of your email accounts will remain intact, as well as any SMS text or iMessages.
     Cheers, Tom

  • Audio problems after installing Windows 8.1

    Hey, so I got this laptop (HP ENVY TouchSmart 15-j013ea) last month, I downloaded 8.1 when it was released and my audio has been shocking since installing. I've tried uninstalling the IDT drivers and having the default Windows driver, but both are pretty terrible.
    When I have headphones plugged in, I can hear a low buzzing noise, like somewhere the audio is set to a crazy high volume, that sort of buzzing. When I'm playing audio through the speakers it sounds like how it would if you had headphones plugged in but you weren't wearing them, really low and like it's far away
    Hope that sorta explains the problem, really ruining this laptop and so far Windows 8.1 seems horrid

    Try installing the driver from the following weblink:
    http://ftp.hp.com/pub/softpaq/sp61001-61500/sp61258.exe
    if the issue persists, please provide the hardware id of your sound card using the following steps:
    1. In the search option of Charms Bar type devmgmt.msc. Select the resulted file in the left pane. This opens Device Manager.
    2. Unknown devices would be listed as such and marked out with a yellow question mark.
    3. Select the sound video or game controllers, unknown device or other device for which you need drivers and right click to access Properties.
    4. In the Properties window click on Details tab and select Device Instance Id  or Hardware ID from the drop down.
    5. An alphanumeric string like this PCI\VEN_1217&DEV_7130&SUBSYS_012F1025&REV_01\4&6B16D5B&0&33F0 is the identification marker for the device.
    6. Please provide this number so that we can suggest the appropriate driver.
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Audio problem after installing windows 8.1

    I'm using a HP Pavillion Sleekbook 14 PC.  I upgraded to windows 8.1 and after intalling my microphone is not work. Can i have some assistance in resolving the issue please.
    This question was solved.
    View Solution.

    Please provide the correct model number or product number of your notebook:
    HP Notebook PCs - How Do I Find My Model Number or Product Number?
    You must have the product number or model number to get technical help or find updated drivers & software. There are several ways to locate the product number and serial number on your PC
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Maybe you are looking for