Audio problems after battery drained

Well, my ipod shuffle 2nd gen was working perfectly well. I'm sorry that I left it completely still in my desk for nearly a month... (No one ever touched it during that month)
After that time, I connected it to my computer, it needed a while (about 5 minutes) before my PC recognized it. iTunes recognized my ipod too, and I can sync music, copy files to and from my ipod. The problem was, when I plugged in the ear-phone, no sound came from my ipod, only some kind of weird noises. At first, I thought it would be my ear-phone's problem, but I tested it carefully with my other Music devices. I'm pretty sure the audio jack had problem, because I could hear disturbed music on my ear-phone. My questions are, why can the audio jack have problem after a month with no-one touch the ipod, and is there any solution for my problems? (I really don't want to use it as a 1GB flash disk...)

what kind of speed changes do you mean? If you mean using some clips in slo-mo (with the sound dropped out) then yes I used a LOT of them... but they are also working fine for the first several minutes...

Similar Messages

I have Audio problems after 6.1.2 update. What do I do?

Is anybody else having audio problems after updating to 6.1.2? How do I Fix it?

No problems here.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Laptop taking really long time to restart after battery drain

Last night I had a weird experience with my mid-2011 MacBook Pro; I went out to dinner and came back to find the cat had kicked the power cord out, draining the battery. I've had this happen before and wasn't too worried; it's always just restarted after I plugged it back in. This time, however, I plugged it in (getting, perplexingly, a green light on the cord) and nothing happened except for the sleep light slowly flashing; it didn't respond to any pressing on the power button, and the sleep light disappeared if I unplugged the cord. The battery test button on the side got one flashing light (meaning, I believe, a dead battery), which also didn't work if the computer was unplugged.
I left it plugged in while I hunted for info on the problem and about an hour later had just decided that I was going to have to take it in to the Genius Bar when it suddenly booted up. The cord light turned orange and it proceeded to fully recharge over the next two hours.
Is this normal behavior after a battery drain? Should I be concerned? Is it worth taking the computer in to get the battery checked, or some other element of the comp? (some of the things I looked at were talking about the logic board, which is not a happy thought)
iStat Pro claims the battery is at 41% health, 111 cycles, which I would think would mean it has some life in it yet.
Anyway, I'd appreciate any advice anyone can offer.
Thanks!

Battery Health: 41%
It is better to get it checked at Apple Store.
If Extended AppleCare is not purchased, Mac is under limited warranty for 1 year
from the date of purchase.
Make use of that warranty.
Best.

Sony Liveview problem with battery drain!Help

Please help, i have just bought Liveview, i charged full for 4h, when i connected, battery drain very fast in 3 - 4 minutes when i use plugins after that Liveview turn off?? Please help me how to fix ít, i can't use ít , i think it have a problem with firmware! I use Xperia ion ics 4.0.4

If the battery is only lasting 10 mins I would advise returning this particular device so that it may be assessed.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Problems after Battery Update 1.4

Has anyone noticed that since installing the Battery Update 1.4, their battery life has been reduced significantly? Prior to the patch I was getting a good several hours from a full charge, now I am lucky to get 1.5 hours.
Also, while the patch was meant to improve the Macs ability to +'maintain its charge when shut down and not used for an extended period'+, I immediately noticed the first night that I shut down with 3/4 battery and woke up the next morning with 1/4.
I have read of several people having issues with the battery not charging or taking a long time to charge - I haven't noticed if I am having this trouble as well.
Anyone??
Specs:
System Version: Mac OS X 10.5.8 (9L31a)
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3891-2b88
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0003
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102

My battery was great I never had to take my charger with me, but after Battery Update 1.4 my battery only lasts half as long now, and if I didn't use it for a week my battery was still 80%-90% now if I don't use it for a week I only get half an hour before I have to plug it in.
THIS UPDATE HAS CAUSED THE PROBLEMS THAT IT WAS MEANT TO FIX!
I only installed this update to be a good little consumer and have now ruined the performance of my macbook, I have tried to uninstall it and rollback to the previous version with out success.
Please help?
Battery Information:
Model Information:
Serial Number: DP-ASMB016-3770-5315
Manufacturer: DP
Device name: ASMB016
Pack Lot Code: 0003
PCB Lot Code: 0000
Firmware Version: 0110
Hardware Revision: 0500
Cell Revision: 0102

Audio problems after exporting out of iMovie

Aloha!
I have a 48 minute movie created in imovie with lots of audio, clips and transitions. It works perfectly when I preview or play it in iMovie. When I try to share it to iDvd, export to iDvd, or to save it as a Quicktime movie, it looks great for several minutes, then the audio tracks get messed up. The correct audio is there, but overlayed on it is snippets from farther into the project, or whole tracks from later in the project, or places where the audio drops out completely. I spent about 70 hours creating this movie and really want to burn it to DVD so I can play it on the big screen. I did burn one version to dvd, and it looked and sounded great - until the audio problems began... any help would be greatly appreciated.
In Garage Band there is a feature where you can consolidate your bits into one track - should I be doing something in iMovie after I finish it before I export it?

what kind of speed changes do you mean? If you mean using some clips in slo-mo (with the sound dropped out) then yes I used a LOT of them... but they are also working fine for the first several minutes...

MBP 2010 13'' completely freezing when loading from sleep after battery drain

Hi all,
Ever since upgrading do Mountain Lion, everytime my MBP 2010 13'' goes to sleep after battery drainage, it freezes in the last "dash" of the waking up process. Furthermore I noticed that the background during wake up is not my dimmed desktop anymore as it used to be on Lion, it is the Apple logo on a white background (similar to Power up screen). I experience no other freezing stated by the community that are attributed to ML, iTunes or Safari, only this one when recovering from sleep. This last time I waited a couple of hours before power down, only resulting in abnormal heating. Already tried fully charge, fully recharge, reboot, cmd+opt+p+r, ... Anyone has this? Is it a known problem being somehow addressed by Apple? Thanks in advance!

So can anyone tell me how can I open an issue on this for Apple? Thanks.

Iphone 4 audio problems after ios6 upgrade

I have problems after upgrade to IOS 6.
The sound mute and i can't up it.
It's the same behavior that appear at the next video:
http://www.youtube.com/watch?v=WZW5kcLyuHs

thejennshin wrote:
I recently upgraded my iphone 4 to ios6 on wifi. My laptop charger has been broken for a while so i havn't been able to sync my iphone to my itunes or back it up in any way. Now that the ios6 upgrade is done, my phone completely turned off and is now showing on the screen to plug in my phone to itunes.
DESPERATE, i am back on my laptop with a borrowed charger and i plugged my phone into itunes. It now says i have to restore it back to factory settings. Meaning, i will lose all of my contacts, pictures, etc. because i havn't been able to back it up onto my laptop.
I definitely don't want anything deleted off of my phone. Did any body else have this problem? Is there ANYTHING i can do to refrain from restoring it and losing all of my memory?
Couldn't you have backed it up to the "iCloud"? or some other cloud based storage before you did the upgrade? If you do not back things up before you upgrade your OS, you are only asking for things to go wrong.

Audio problem after rendering!

Hi everyone! I am having a problem with sound in my project after rendering. I am using Adobe Premiere CS2 , and in Audio track 1, I have someone speaking, and in track 2 I have backround music. When I play it back in the window, together it sounds perfect. After rendering, the voice becomes very crackly and distorted. I have tried rendering just the voice without the backround music, and it sounds perfect. It seems the addition of backround music is causing the distortion to the other track. I have tried rendering the backround music seperately and adding it in, but still the problem persists. I adjust the music so that when the kids are talking, the music dips down, and when they are not, I leave it at it's normal level. HELP..I am losing my grip on this one! Thanks so much....Tammy

Tammy,
If we've dropped a bit of time for this part of the edit, you now have time for more fun aspects of it.
While I will casually monitor my Meters, I spend much more time with a good set of noise-canceling headphones, listening critically. The Meters are basically to point up potential issues. With Audio, if you have not invested in a really good set of headphones, do yourself a big favor, and sneak 'em into the budget.
Glad that you got things toned down.
Now, let's go on to Lesson 02 - The Audio Mixer. Unlike adding Keyframes to a Clip, when your cutting is done, you can apply Track Keyframes to attenuate (also Pan, etc.) you Audio Tracks to suit. One would just change the Send in that Track to Write, or Touch, and "ride the gain" with the slider, as is required. I probably do most of my Audio editing there, than addressing the individual Clips. First thing that I have done is cut back a bit on the frequency of the Track Keyframes in Edit>Preferences, as I find the default to add too many (and you can go in and adjust these by hand, if you need to "smooth" things out a bit.). One caution: do this when you are satisfied with the cuts, Clip placement, etc., as these Keyframes are applied to the Track. If you were to remove a Clip, and replace it, those Keyframes would apply to that new Clip, whether you want them to, or not. This trips some folk up, if they do the Audio Mixer thing too soon in the editing. Wait until you are "in love" with your Timeline otherwise. It's like scoring a Project. One does that as about the very last step, or much work will be repeated, and that is not fun.
Good luck,
Hunt

Audio problems after exporting

I have created a 43 minute iMovie with very, very heavy editing.
I love my movie, and until recently, it would play back fine within the application.
(but now, not even this works for me anymore.)
When I export the movie in any format, My audio gets all mixed up.. Random audio clips from other parts of the movie are heard with, or substituted during other parts. It is so frustrating after so much hard work.
Is there any way to resolve this problem without having to start from scratch?

Dito! I just worked for months on 45 min movie and the same problem. And the answer is WHAT?!!!!!!!!!!!!!!!!!!!!!!!!!!!!! whats the piont of beat markers and the ability to use all these things and now i have to WHAT??????? go back and try to re edit the speeds? Great I switched to an Apple only to find out BIG mistake. I cannot believe this has not been fixed. Whata joke! I have to get this DVD in the hands of someone by the end of the weekend that might be able to change my life and i have made a GRAVE mistake in intrusting it in a MAC

Ipad 2 audio problem after updating to 8.1.2

Immediately after updating my ipad2 to version 8.1.2, the audio is distorted. Even the key clicks are distorted. I've reset the ipad, I've restored the ipad. No luck. Anyone else having this problem? Any suggestions ?
Thanks

Actually, I found out what to do: The mono button under accessibility needs to be toggled on and then off again.
I asked Siri who provided some good links from when the problem happened with version 7.

Problems after Battery Update

After I installed the battery firmware update from the software update, the battery gets to about 50% and my computer just loses power. I hit the button on the battery and 3 out of 5 lights light up. When i try to boot i get the gray screen and soon after it loses power again. Before the update i was getting a good 2+ hours of work, now it is down to an hour.
If its some thing i cant fix myself, I dont have an apple care plan, so will this cost me?

Same Exact Problem Here. After the Update, my battery barely lasts an Hour...
My batter got b/w 2 to 2.5 hours prior to the update...
It's unreal...
I love my MBP, but when I first got in August of Last Year, the problem was Airport didn't work well and had horrible connectivity to wireless networks;
Then, they finally fixed that problem months later. Now, it's The batter...
I really do think that apple products, are, in general, better than much of the competition; but I really do wish they they would work out more kinks (R & D) prior to putting products out there...
I do have applecare, but dealing with applecare is like dealing w/ the BUSH Administration; it's all about deniability...
BTW, I don't know if you read about it; But, supposedly the warranty on ALL MBP Batteries was extended for an additional year beyond the factory warranty of a year, so you should still be covered if you have a MBP that was manufactured last year...
Good Luck,
David

[solved] audio problem after update

hi, after the kernel update of yesterday i have a problem with my audio. after a reboot, my audio is totally absent. i have saw that the pulseaudio process is present and activate, and all graphically is ok (all indicators works well). the strange thing is that if i put headphones and then i releave them, all magically works normally!
Last edited by blauman (2014-06-19 17:12:06)

ok i don't need it...i have solved with
Load equalizer and dbus module on every boot
Edit the file /etc/pulse/default.pa with your favorite editor and append the following lines:
### Load the integrated PulseAudio equalizer and D-Bus module
load-module module-equalizer-sink
load-module module-dbus-protocol
on wiki of pulseaudio...i don't know why, i had already done it in past, but i don't know why on my default.pa there aren't these lines..seems now it works!

Audio problems after windows 8.1 update

My audio volume has gone to barely audible after I went to 8.1 however only for certain things.
When I try to listen to a vidio clip on Yahoo or other news feeds I can barely hear anything and when I play
free cell or solitare and make a wrong move the audio warning is just barley audible.
However when I listen to a Facebook audio it comes booming in as before the upgrade. and when Malware bites
does a update the signal is very loud
I re downloaded the realtec audio driver for 8.1 and have gone through all the settings I know about
and nothing works to help.
I would go back to the old Windows 8 ( I don't think 8.1 is any better anyway ) but I will loose my
Microsoft office download and some game downloads I have installed and have to re buy them.
Any Help ?
Aloha from Kauai Leon

rckuehl wrote:
Model is Satellite E55-A5114, part number is PSKPJU-01K023.
Not sure when my computer got updated to 8.1, but I started losing audio at some sites around August 2014.
Bob
Hi rckuehl. It may have been caused by installing the Microsoft August 2014 update for Windows 8.1 - KB2975719.
Try uninstalling the KB2975719 to see if the sound problems go away. If not, try installing newer Realtek HD Audio drivers as your E55-A5114 laptop uses Realtek audio drivers; original driver for that model was 6.0.1.7026. The latest Realtek HD Audio driver from Toshiba is version 6.0.1.7329 which was posted 9-25-2014.

IPhone 5 not charging after battery drained

the battery of my iphone 5 drained and i have left it
charging for about two hours now and it hasent even shown
the battery icon that its actually charging .
for startes the cable is not an original
any suggestions (besides using an apple cable, i will try that
the moment i have one with me)

I had the same problem, there isn't any helpful answer TBH, this is the one I can find for now, which seem to work for me:
Here is a fix: Pur iPad in DFU mode...
Hold the power button for 3 seconds
Begin holding the Home button without releasing the Sleep/Power button for 10 seconds
Release the power button and continue holding the home button until you get a popup from iTunes that your device is recognized as being in recovery mode.
That’s it, you’re in DFU mode. If you get stuck in DFU mode and need to get out, just hold the power button and home button simultaneously until the Apple logo appears.

Audio problems after battery drained

Similar Messages

Maybe you are looking for