Audio Problems and Webcam Stuff

See my name is Josiah Blodget and I'm 17 years old I wanted to tell you guys this. So yesterday I was moving icons around and I keep deleting mutiple copies of icons and I keep the originals. Then when I got on today my audio was acting all werid like for example when I'm on You Tube even when the volume is not on mute you can't hear it. I think it had something to do with me moving the icons. So that's my first problem.
My second problem is that when I'm on Internet Exopler the web cam is not on there but when it's Google Chorme it's works. I remeber months ago I remeber I accidently deleted my You Cam Icon and that is the second probem I wanted to confrim with you. Thank you for reading this.
Josiah

Quote from: Stu on 07-May-07, 20:41:21
Basically if you're having audio problems in Vista, you should look for latest Vista drivers from your chipset manufacturers website (links can be found in the Download forum here), and if you cannot obtain Vista drivers then you should look to buying a new sound card which does have Vista support
Wait and buy a new sound card. Test this first! Install lets say XP and then after your normal soundcard installation "copy" the installed sounddrivers folder for you specific card. Then you paste that folder on a usb drive/cd or another harddrive that you again c/p inside to Vista when thats installed. Check in the device manager for audio and Update that with the drivers from your copied drivers folder from XP if you dont get an automatic driverinstallation. If you do use that guide. Vista will prolly scream that the drivers where'nt checked etc. Skip that mess and just install anyway (on your own risk ofcourse! ) and then reboot the pc. If all goes well as it did for me the sound will now work flawless even if not a specific software that came with the card might do. If this tip didnt work well then its probably time for a total new soundcard that does support Vista 100%. Good Luck!
/UN

Similar Messages

I downloaded itunes, but it says I have an audio problem and can't play the game I purchased, any ideas?

I downloaded itunes on my pc, but it says I have an audio problem and won't let me play the game I purchased, any ideas?

Why do you assume that this problem is a "bug" that Apple has to address, and not a problem with your phone, that you need to address. Do you see others having this specific problem?
Try:
1. Reset phone (no data loss): press both the home and power buttons for at least 10 seconds, releasing when the Apple logo appears
2. Install using iTunes on your computer/

10.9.2 Audio problems (and "reportcrash" stuck)

Since updating ive been having problems. My MBox2 has been rendered useless. The audio from both daw and sytem is distrorted and garbled when it does work. I reinstalled the latest drivers, I repaired permissions and disk and even reinstalled the system; no dice, still fustratingly distorted audio. I don't know what else to do, I need this to work. Even though the built in line out I've been getting these horrible pops(since 10.9.1) Also now VLC hangs for a while on launch and causes "reportcrash" in the activity monitor to constantly use over 100%cpu and force quitting only causes it to respawn, I have to restart the system. While I'm glad my mail now works again, I wish I could revert back to 10.9.1. I'd happly take mail issues over the loss of my audio interface and production workflow.

Sorry, forgot to mention -
Our Windows PC (AirParrot installed) can still mirror to ATV. So can our IPhones
IPhone, Android tablet, Windows PC can all still connect to/access files on LaCie CloudBox.

Audio problems and can't open project to another computer.

I'd like some help with moving a project from my G4 powerbook (10.4.3 1Gb RAM) to my G5 iMac (10.4.4 1.5Gb RAM) both with ilfe 06 installed. I copied the project file across and it won't start up on my iMac. The reason I'm trying to move the project over is that the audio quality on the entire (powerbook) project is absolutely u.s. (created on my brand new powerbook with factory settings intact). I have already used iMovie on my iMac with the same camera and it worked just fine and was kinda hoping that 'porting it over might cure the problem, although I'm not at all sure it will. I think the fault is probably embedded in the original. (incidentally, I CAN open the moved project when I connect my powerbook to my iMac)
Audio problem:
I noticed, while importing the clips, that my powerbook started sporadically cutting out the audio (unusual I thought!) but I was under a bit of pressure to complete and thought it was just a temporary glitch.
I'd appreciate some help with that also, if anyone has a suggestion.
Anyway, as I said, the project simply won't open on my iMac (I've checked permissions they seem OK) iMovie starts up when I click the project, but stalls until I click iMovie's icon in the dock, where upon the previous project I worked on loads up fine.
Most frustration overall, I thought if I had 2 machines I would have ultimate flexibility - It's not woking out like that at all.
I'm apprehensive about upgrading my powerbook to 10.4.4 at the moment - frightened I'll loose the whole thing!!
I've used iMovie 2, 3 and 5, never had any issues like this before.
iMac G5 + Powerbook G4 (10.4.3) Mac OS X (10.4.4)

Same here. I don't have a solution, but I understand exactly your problem. This is what I did.
Imported movies into iPhoto from stills camera.
Opened iMovie, new project bla bla, dragged from event library (iphoto videos).
Made/edited movie etc.
All gone well. Exported to iTunes/iDVD etc no problem.
Now, I don't need to keep all the original video clips in iPhoto so can I delete them?
Yeah sure, I'll just drag the iMovie project to my ext HD as per the iMovie help files.(in iMovie)
Opened project that is now on ext HD.
File/Consolidate/Copy clips & Move events.
But.... it doesn't. The 'Copy clips' box even says '2.2gb' which is the right amount for the movie clips. But they never go to the iMovie project file on my ext HD.???

IMovie to iDVD-audio, slides and videos stuff up

Possess a Powerbook G4, DVD burner.
Did a project using clips and video clips. Share it with iDVD. Tried previewing it.
Audio plays and stops intermittently. Clips do not move and show sequentially. Audio keeps playing and stopping intermittently but clips and videos did not play as sequenced in iMovie.

thanks, it did work later. Now there is problem with
opening it after being burnt onto a disc. I tried
opening it but there was a message that says
"An error occurred while loading the project. This
project seems to be write-protected and cannot be
opened."
what happened?
What are you trying to open?
If you are able to burn the disc, you surely had the project open.

Bluetooth audio problem and 2011 Mazda 3

There is a great deal of conflicting information in regards to bluetooth audio compatibility and various cars (2011 Mazda 3 in my case) and the iphone 4... So I'm trying to get a straight answer!
Anyway my car (according to Mazda) supports AVRCP 1.3, however when pairing to my Verizon iPhone (4.2.6), the car reports BT Audio (which denotes that the device has less than AVRCP 1.3 support).
So question 1... Does the iphone support AVRCP 1.3 in its entirety or is it some limited incarnation of it or simply just A2DP?
Question 2... The options that I have with BT Audio allow me to skip the track, but won't allow me to pause/stop (I hit the pause/stop and the audio stops for split second and then restarts) So what's the story here?
Question 3... What am I supposed to expect from the iphone 4 in terms of bluetooth support? i.e.
Plays blue tooth audio? (Yes it does that quite well in my car)
Allows Skip, Pause functions from car controls? (It skips track, but NOT Pause)
Shows current playing track? (Ok I'd assume that the most advanced smart phone on the planet would support this simple function, but I don't believe it does and if it doesn't...why not?)
Answers anyone?

brassman1234 wrote:
So question 1... Does the iphone support AVRCP 1.3 in its entirety or is it some limited incarnation of it or simply just A2DP?
Yes, the iPhone does support AVRCP. The Supported Bluetooth profiles article says that it supports "pause, play, stop, next track and previous track for AVRCP."
When you look at Wikipedia, the AVRCP profile goes up to 1.4. It looks like the iPhone supports the 1.0 profile.
Question 2... The options that I have with BT Audio allow me to skip the track, but won't allow me to pause/stop (I hit the pause/stop and the audio stops for split second and then restarts) So what's the story here?
Thats all that AVRCP 1.0 supports.
Question 3... What am I supposed to expect from the iphone 4 in terms of bluetooth support? i.e.
Plays blue tooth audio? (Yes it does that quite well in my car)
Allows Skip, Pause functions from car controls? (It skips track, but NOT Pause)
Shows current playing track? (Ok I'd assume that the most advanced smart phone on the planet would support this simple function, but I don't believe it does and if it doesn't...why not?)
The first article that I linked provides details about what bluetooth profiles are supported by the iPhone and what you can expect it to do.
To get the most functionality, you'll want to keep your car stereo and your iPhone updated. Previous iOS updates have included support for more bluetooth profiles.
WTH.

Audio problems and more after updating to 10.4.3

After taking an OS X update to 10.4.3 from 10.4.2, I've got static instead of audio. This happens no matter what program I'm using: Bias Peak 4.14, iTunes 6.0.1, Apple DVD Player 4.6, QuickTime 7.0.3. I'm even getting static on system sounds (empty trash, delete file, etc). If I open 'Sound' in System Prefs, I'm treated to continuous static...
My sound card settings have not changed - it's an M-Audio Audiophile 2496 running driver version 2.0.4. I've tried contacting M-Audio tech support but they're closed on weekends.
Everything was ok before I took the update. Now i've got the static and other weird problems as well:
If I try to play a .vob file from a commercially pressed DVD using VLC Media Player, I get the following error message "read failed - permission denied". Anything from a recordable DVD is fine (except for the audio).
If I try to backup any file from a commercially pressed DVD, the file doesn't copy and an error message appears: "The operation cannot be completed because you do not have sufficient privileges for some of the items". I double-checked with a DVD that I had previously backed up successfully using the same method and now it doesn't work.
Any thoughts or suggestions will be most welcome.

This was resolved by repair disc

An audio problem and a video problem

1. I'm a total novice about audio filters. Which filder would be best to take out wind noise? I used a rabbit fur baffle but still got a bit of wind noise. It cannot be reshot.
2. Sometimes when I try to put a transition between two clips it seems to slip under the timeline. How can I avoid this and get the transition to center on the edit.
Thanks for your help.

1. SoundTrack Pro might be the best tool for this unless you have a more sophisticated audio program installed. Essentially, you'll need to sample just the wind noise then use the sample to filter the rest of the clip.
If the wind noise is just low end rumble, one of the EQ filters may do it without leaving FCP. You'll need to play around with the settings to find what works in your situation. The main problem with wind and air noise though is that it often covers must of the audible spectrum, so any filtering you do can/will also effect the part of the sound you wanted to keep.
2. Sounds like a "handle" issue. Make sure your clips have enough frames before the IN point and after the OUT point to support the duration of the transition you're using.
-DH

Audio problem and macbook pro very slow

Hello,
I have a macbook pro for less than a year.
The latter has begin to be very slow. In addition, I have no sound which are emitted from my Mac, setting apart the opening gong. By the jack, there is no red light that are emitted. I tried to go in the program "audio setup midi" but it does not even want to open. So I tried to open the configuration panel go to select a new audio output device, but to my surprise, after an interminable waiting times, I got a list of blank audio device .. .
I noticed that it started when I put my Mac to version 10.7.4 ... So this is very recent ...
When downloading the update, I was editing a script with automator and my Mac was rammed by an HDMI cable has a television, if it ever can help.
I was wondering how to solve my problem.
thank you
Bonjour,
j'ai un macbook pro depuis moins d'un an.
Ce dernier a commencer a être très lent. De plus, je n'ai plus aucun son qui es émis de mon Mac, mise a part le gong d'ouverture. Par la prise jack, il n'y a pas de lumière rouge qui es émis. J'ai essayé d'aller dans le programme "configuration audio midi" mais celui-ci ne veux même pas ouvrir. J'ai donc essayé d'ouvrir le paneau de configuration pour aller sélectionner un nouveau périphérique de sortie audio, mais a ma grande surprise, après un délais d'attente interminable, j'ai eu droit a une liste de périphérique audio vide...
J'ai remarqué que cela a commencé lors que j'ai mis mon Mac à la version 10.7.4... Donc, c'est tout récent...
Lors du téléchargement de la mise à jours, j'éditais un scripte avec automator et mon Mac était banché par un cable HDMI a une télévision, si jamais ça peux aider.
Je me demandais comment résoudre mes problème.
Merci

The startup drive is failing, or there is some other internal hardware fault.
Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

Premiere Pro audio problem and crash

Yesterday I got an error multiple times which then led to PP crashing.
I imported an audio track, placed it in my time line, and when i went to adjust gain is when it would freeze/error/crash.
The error i got was:
[/Volumes/BuildDisk/builds/MightySilt/shared/adobe/MediaCore/ASL/Foundation/Make/Mac/../.. /Src/Mac/MacFile.cpp-1104]

In AME, please go to Preferences>General and disable the Import Sequences Natively option. Then export the sequence from Premiere Pro to AME and see if the problem persists.
If this change resolves the issue, then we'll be interested in getting a copy of the project, if possible, to test with.

Hi there! Audio problem.product:webcam vista os:XP pro

I recently bought "webcam vista" and i have few problems with my windows XP.
it seems to be that the cam supports win XP but when I am tiring to "find" the cam on the hardware list
it didn't appears.
when I am tiring to record my self I can see a picture but No voice!!!!!!
same problem with the live messenger people can see me but not to hear!
please help I have tried everything!!!!!!!!!!!!!!
thanks.

does your keyboard usb or ps/2 connection.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Complaint regarding the Audio problem in handset

Dear Sir / Madam
I am having BlackBerry 8520 Curve and purchased it on May'10. After buying this BB handset I am facing the problem in audio and not able to listen the voice clearly. I had submitted my handset for 4th time at Redington India Limited Ahmedabad for the same issue, but the problem is yet not rectified.
I have submitted my handset again at Redington on 26th July 2012 and they have given me the estimate of Rs. 4200 to change the housing of the handset. Before that I have given my handset at Redington for the same audio problem on 14th Mar 2012, 16th Jan 2011 & also give while the handset was in warranty period, but the problem is still same.
Now my question is that, I have give mobile 4 times for same issue and still I am facing same problem than why should I pay for housing, as it is manufacturing fault of handset. Still my mobile is at Redington and I want the permanent resolution for the audio problem, and if you are not able to solve the problem than please keep the handset with you, as I don't want the defective handset.
I have purchased the Blackberry as it is the brand name and for the service but I am really disappointed by such kind of worst service.
Name: Nilesh
Contact No: ***
Work Order No: ***
Case ID: ***
Model: Blackberry Curve 8520
IMEI No: ***
Pin No: ***
Given at Redington on: 26th Jul 2012.
Please find the above details of handset and contact no, and I expect the positive response from your side. If the problem will not get rectified I will have to go for the legal action against the Blackberry and will also mention this issue on Facebook so another people also come to know about the services of Blackberry.
With Regards
Nilesh
Removed personal information to comply with Community Guidelines and Terms and Conditions of Use.

Hi and Welcome to the Community!
As a user-to-user community, no one here can answer your question with any level of authority whatsoever; this site is not a channel for any formal communications with RIM. Further, RIM provides zero front line support to end users, including warranty...all support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into RIM at no charge to the end user.
So, your escalation path is not here, in these forums. Rather, it is through the places you already are working with...even if they may have a poor reputation. You have no free path by which to bypass them.
There is something called incident support, but it costs to just ask the initial question, since you are bypassing the contract you signed upon purchase. If you wish to investigate that, you can review it here:
http://us.blackberry.com/support/programs/technical/incident.html
There also might be some good reading here:
http://us.blackberry.com/legal/handheld-limited-warranty.html
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Weird audio problem during calls

I have a weird audio problem and was wondering if anyone else has had a similar problem or could help...
My wife and I both have iPhone 5's and sometimes (not all the time) when she calls me (or I call her), it connects, but no matter which audio input I choose (phone, bluetooth, speaker, headphones), I cannot hear her, but she can hear me... I hang up, call back (and when I call, there is no dialing sound, nor any other phone sounds) and it's the same thing. Sometimes restarting the phone works, other times I have to restart it 3-4 times before it'll work again. I try different things during these calls, like turning on/off bluetooth and/or wifi (pretty much anything I can think of that would make a difference), but nothing seems to help.
The (other) weird part is that after the last time of this happening, I tried calling my iPhone with my office phone and it worked fine, so then I immediately call my wife back with my iPhone and it was doing the same thing again. I called her back using my office phone and could talk to her fine...
This problem has been going on for a few months now and I have tried restoring the phone a couple times (and I am on the latest iOS) and sadly, that hasn't done anything to help... Does anyone have any ideas what is going on? I'd make an appointment for the problem, but since it doesn't do it all the time, I don't know what good it would do... But it is getting very frustrating!
Thanks for any help!
-Jason

Thanks for the response! It happened again yesterday... It seems to be happening more frequently in the past few weeks now.
I checked the link and have tried all of the things listed at one point or another over the past few months. I did just check my Carrier settings and it said it had updated (it's on 14.1), but I am not sure when that happened (could have been today, could have been after my last restore last week, not sure). I'll keep my fingers crossed that maybe that fixed it...
If it continues to act up, would you recommend that I bring the phone in to an Apple store or an AT&T store? I bought the phone through Apple, but my carrier is AT&T (and if you suspect that the problem may be with the cellular conection), maybe the AT&T store would be the better choice?
I really wish the problem would be more consistant or go away, cause trying to get the problem solved is driving me crazy!

Audio and Webcam issue

Recently, my HP ENVY dv6-7210us Notebook PC has stopped being able to play any sound from anything. The issue includes several programs being unable to run audio files due to this, rather than just playing the file and no audio coming out. Additionaly, I find out a few days later that my built in webcam also is unable to work, although a USB webcam may still work if plugged in. I am close to assuming this may be a hardware issue rather than software, but I am making sure all my bases are covered.

Hi @InsanitySpiral
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some audio and webcam problems. I will be happy to help you with this. Are you using Windows 8 or 8.1? For the webcam problems try this HP document Webcam Troubleshooting.
For the audio issue do you get any sound if you plug in a set of headphones? I have included a number of troubleshooting steps below and a couple of documents as well. There was an issue with a Windows Update that was causing sound problems about a month and half ago. I don't imagine that is the issue at this point but if nothing else works there is a workaround for the Windows Update below.
The first thing to try is this HP support document No Sound from Speakers. It has a number of good troubleshooting steps including using the built-in Windows troubleshooter.
Another solution is to uninstall the driver manually then force Windows to reinstall it. Follow the steps below to do that.
Step 1: Open Device Manager and open Sound, video and game controller section.
Step 2: Right click on your audio driver and select Uninstall.
Step 3: Restart the computer. Windows will then force in the driver on startup.
The last troubleshooting step is to try creating a new user account to see if the issue is only affecting the one account. This can happen is something has been corrupted in the one user profile. This HP support document Managing User Accounts and Logins look under the section Creating a new account in Windows 8.
Here is the workaround for the Windows Update:
At this point, unless you want to reinstall the operating system, the only other option is to tackle the update, KB2962407.
Uninstalling the Windows Update, then hiding it, is the only method of eliminating the issue if it caused by this update. Here is the procedure for uninstalling the update:
Step 1. Go into Control Panel, then click on “Programs and Features”.
Step 2. Click on “View Installed Updates”. Look for the update with the ID number KB2962407.
Step 3. Right-click on the update and select “Uninstall”. Restart the computer.
Next, here is the procedure for hiding the update:
Step 1. Go into Control Panel, then click on “Windows Updates”.
Step 2. Click on “Check for Updates”. When the process is completed, is should find important update(s) available. Clicking on the message will open a window where the important update(s) is.
Step 3. Right-click on the KB2962407 update and select “Hide Update”. This will prevent the update from being installed next time Windows Updates are being installed.
(source material)
Looking forward to hearing how this worked for you.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM

Hi friends,
SUBJECT : AUDIO PROBLEM WHILE USING OR ALONG WITH WEBCAM
I'm not getting any sound while using web-cam.
I tried recording my voice , and played.. i can see my video but audio
Do we have any settings where i need to cross-check to make sure that everything being turned-on ?
My laptop details:-
HP Pavilion dv6 laptop
Operating system Installed - Windows 7
Can someone help me with this?
Thanks
kiran

Hi,
not sure if coincidence or the same question, but the same question got asked internally. The seeded option is required to get the OJSP filter installed. Here's the internal response
ADF View integration with MDS not configured
In web.xml, you need to have mds-ojsp intg enabled to load jspx base + customizations from MDS. In your web project in Jdev, go to ADFv project properties and select “Seeded customization” property. It would enable mds-jsp engine configuration in web.xml. If you want to use user personalization feature at runtime, you would need to select “User customization” property as well which would enable ADFv change persistence config in web.xml.
Warning: Some of the metadata under ... is packaged as part of both WAR and MAR. This metadata cannot be accessed from WAR using MDS.
For these two packages, you are including the files in both WAR & MAR. This warning conveys that since these base files are being put in MAR, at runtime they would be read from mds repository & not from WAR.
Frank

Audio Problems and Webcam Stuff

Similar Messages

Maybe you are looking for