Audio problems going to tape

I have a 20 min program for a client - audio is fine in the final sequence, that sequence nested and on the QT file of that sequence - no issues. However when I go to tape, I have a few dropouts and distortions. I am on a Mac Pro 8 core, the media is on a separate internal drive (not boot drive). I have tried print to video and edit to tape...same issues. I have tried 2 different Sony decks, 2 computers and 3 different new tapes...I need to deliver the master within the hour!!! I have never had this issue before ! HELP!
Ann

- What tape are you trying to edit to?
Digi Beta, DV, etc. (If via Aja, then try to set the REF-switch on the deck to video-input)
- Are the dropouts always on the same spot?
- Did you try a different tape?
- If FireWire Deck, disconnect all other FW devices
- Did you export the sequence as Selfcontained movie and Edit to tape THAT sequence.
- Is all the audio 48 kHZ
- How is the deck connected.
- How is the audi connected
- Are those dropouts not high peaks that get distorted,
- etc.
Tell us as much as possible
Rienk

Similar Messages

Audio problem going from 5.0 to 4.5

I have captured a project on one computer with FCP 5 and the audio works fine, when I transfer the files to another computer with FCP 4.5 the audio does not play. Is there a codec problem do you think? The audio plays in quicktime player on the same computer that has FCP 4.5.
Any hints greatly appreciated.
David

Hi
Both machines have V7 of Quicktime Pro on them.
Thanks

Audio problem going from Premiere 6.0 to Premiere Pro

When I go from Premiere 6.0 to Premiere Pro the audio is messed up. I figured how to make the audio okay at one point ... something to do with 48k, importing or exporting. But I forget what I did. Does anyone know that specific routine?

Hi
Both machines have V7 of Quicktime Pro on them.
Thanks

Premiere CS 5.0.3 problem export to tape via firewire

hi
My problem is that i can't able to export a sequence into a tape dv by firewire
I use premiere cs5.0.3, matrox rtx2hd, win 7 and a sony hvr-M15J
I've not problem to IMPORT tape from a matrox sequence neither from a premiere sequence but I CAN'T export to tape (i use firewire connecting my hvr-15j to matrox rtx2)
My workflow
I create a premiere sequence, the device control is online, in sequence setting>Playback setting i set DV 25i (720 x 576) but when i start to export to tape my sony hvr start to rec, timecode going on but it's all black and no audio
i try different setting in playback setting but nothing change, what's the problem?
Device control is online but maybe i have to change setting ofsony hvr-M15j ? The strange thing is that I've not problem to import dv tape
please help me
thanks

Matrox has no bearing on this - RTX2 just passes video through. It uses Adobe settings for capture and export.
Make sure your playback settings reflect what you are trying to export. Try this:
1. External Device set to DV, etc.
2. Audio button set to "External Device Audio"
3. External Device set to your DV device, not None.
4. MPE set to software only in the Project panel.

4s, just updated to ios7, audio problems

I updated to ios7 yesterday and everything was working fine, no problems for approx 24 hours.
Today while watching video on the Netflix app, the audio stopped working.
Now, this is what I have:
-Ringer does not work when i receive calls
-Notification sounds do not work
-there is no audio with youtube, netflix or video files
-no audio with itunes music
-sound toggle (up and down) do nothing.
-the silent/vibrate toggle above the audio toggles causes phone to vibrate but does not effect this audio problem
however;
In Settings; Sounds:
     -when I use the volume slider for 'ringer and alerts' it plays the tone,
     -when I select a different ringtone, it plays the tone,
     -when I select a different text tone (tweet,mail etc/all others), it vibrates but DOES NOT play the tone
Additionally,
     -audio works for phone calls on both regular and speakerphone settings
     -audio for all apps works when earbuds/headphones are plugged in, through headphones
Troubleshooting attemts so far:
-vibrate toggle attempted, not the issue
-multiple soft and hard resets, no fix
-cleaned charging port, no fix
-cleaned earphone jack, no fix,
This appears to be a software update or app/setting compatibility issue. I've read other threads that suggest turning off 'airplay'... i cannot find airplay anywhere in the settings or on my iphone. I am not excited about going through the hassle of restoring my phone, losing music and saved app data.
I find it difficult to impossible to revert back to ios6.x.x and cannot restore my last backup from that version of ios.
My frustration abounds and makes competitor Android devices seem enticing.
Please Apple, help me

I encountered the same problem lastweek, as much to my surprise after reading all blogs & fixes, here's what i did...
1. I did a "Restore All" using iTunes directly connected to a pc/desktop, the reformat & reprograming only took 1hour to be exact, unlike wifi update, it took me 5hours & 45mins for total completeion of update iOs7 (which later on had problems due to unstable wifi connection)
Still the earpiece didn't work, but the phone performs fine now w/o a glitch, flawless...
2. My last resort before claiming my warranty or having it fixed, i did what others did that made their phone work, believe it or not, neither did i, it yes was a hardware problem, a simple "LOOSE CONTACT" on the earpiece...
So what i did after vacum & cleanning it up thoroughly, applying controlled great pressure directly on the earpiece like cpr, i toggled my phone w/ great force hitting the sides by hand, much like tapping it on my hand w/ great force while on a call switching from loudspeaker to normal earpiece, until such time in less than 5mins, whala, it worked i heard audio again on the earpiece...
I've been so careful w/ my unit w/ outmost premium accessories & care, ignoring the fact that sometimes bcoz of the great protection we ignore some minor mishaps like dropping it on the floor from our lap... As simple as that could be the cause... So, if u think at times u might have unconciously dropped it even w/ case on, it may have caused it...
I hope this helps & also fixes yours... I know what it feels...
But just incase it doesn't, then yes it's time to claim your warranty...

Audio Problem since upgrading to Mountain Lion

Has anyone encountered audio problems with their iMac? I just upgraded to Mountain Lion on my i7 27" with 16GB of Ram and found that the Audio starts to get distorted and eventually cuts out after about an hour! It starts cutting in and out when I move the mouse and eventually there will be no sound at all!
Sometimes it can take over an hour of steady use, my last time was watching a movie on Netflix. I initially noticed this using a USB DAC Headphone Amp.
I never had any Audio problems before, my machine is over 1 year old.
I enjoy watching movies in iTunes and DVDs, but this is making it difficult! A full restart usually fixes the problem for a time but it will eventually come back
I'm seriously thinking of going back to Lion for the time being and seeing if it is a Hardware problem.

i don't know if mine is the same issue, but i had no sound through any of my applications after upgrading to mountain lion. here is what i had to do to fix it:
-- applications > utilities > audio midi setup > UNmute all options under "built-in output" (they were mysteriously muted)
Also, I noticed that the options for "use this device for sound output" and "play alerts & sound effects through this device" were no longer assigned to my Built-in Output device. They were assigned to some other random sound driver. To fix, i right-clicked on Built-in Output and reassigned those items to my built in speakers. All fixed now!
very weird problem, though.

Can Apple fix the 12 bit audio problem once and for all?

I have had persistent audio problems from I Life V3 all the way up to I Life 06. Sometimes it is synch issues. Sometimes it is audio dropping out. I have been through the various forums and applied the various remedies with some successs, some failure. The basic problem is that I have an extensive quantity of Mini DV tapes dating back to 1997, most recorded with 12 bit sound (prior to 2002). Apple's basic stance has been, you must use 16 bit sound or I Movie and/or I DVD won't work and . And proposes awkward workarounds. Basically placing the onus on it's own consumers. Why can't 12 bit sound support be included in I DVD 06 and these persistent audio issues put to rest once and for all? Is there some overwhelming technical reason why it cannot be done?

I don't know about overwhelming, but the DVD specification (which was not developed by Apple) calls for the audio to be sampled at 16-bit/48KHz (I think you might also be able to use 96KHz as well). This is what the software expects. If you choose to use another sample rate then the software may or may not be able to "fix" it in post. The real problem is that many camcorder manufactures set the audio to 12-bit by default.
Mike

HOW TO FIX NO AUDIO PROBLEM IN FLASH (4 SOLUTIONS)

This solution is for WINDOWS ONLY!!! Unfortunately I believe
it is a bug in flash itself as I have read more than one instance
of this same no audio problem occuring on MAC'S and LINUX based
systems as well. IF YOU KNOW OF SOLUTIONS TO THE MAC OR LINUX BASED
PROBLEMS, PLEASE POST THEM IN THIS THREAD.
Description of the problem: Video sites such as YouTube,
VideoSift, Break, Google Videos, Yahoo, and a plethora of others do
not stream embedded audio. Viewing a YouTube video, for example, on
VideoSift.com results in the video playing back with no audio.
However, by going directly to YouTube and playing back the same
video, it appears to work.
THERE ARE SEVERAL POSSIBLE SOLUTIONS.
Problem: You may be missing your WAVEMAPPER driver.
Cause: Wavemapper driver was removed during installation or
updating of the Flash Player. It might not necessarily be Flash
that removes it but apparently something does.
Solution #1: Google "Flash No Audio WAVEMAPPER" for
directions, its been covered a bunch, but basically requires
running REGEDIT and readding the WAVEMAPPER key to the appropriate
location and value in the registry. Its not as difficult as it
sounds.
http://weyland.be/wrdprss/index.php/2006/08/22/no-sound-in-macromedia-flash-player-9/
if your wavemapper key is installed correctly...
Possible Cause: Corrupted or damaged flash content preventing
audio streaming from working correctly.
Soltuion #2: Run CC Cleaner and delete only cached Flash
content. It is a free program, again just google "download CC
Cleaner". This particular solution worked for me.
If CC Cleaner also does not work, the description of your
problem may differ slightly. In my case on several computers, one
day it worked, the next day it didnt. If it never worked, this
would be a logical solution for you. One variation of this that I
have found is to create a new Windows User Account and log into it.
The reason the CC Cleaner method may work better is that the User
Accounts have their own separate cache folders so a corrupted cache
preventing audio playback on one profile will not be available on
the other User Account to cause the same problem. I wont explain
how to do this as the CC Cleaner will work better but if you are
curious, yet again google "create new windows user accounts". I
have also seen this method work on one of my affected computers but
it did not fix the issue on the account I was having problems with.
http://www.ccleaner.com Install
and run it, use it only to remove Flash under the Applications Tab,
Multimedia, Adobe Flash Player. Check it and uncheck everything
else, then hit Analyze then Run Cleaner.
Possible Cause: Missing Codec
Solution #2: Download and install the K-Lite Codec pack.
Again, google it. A CODEC stands for COmpressor DECompressor and is
a way to make audio and video files small enough to be transferred
on the internet. There are a lot of different codecs and if you
want to play back a video that was compressed using a particular
codec, you will need that same corresponding codec to decompress
your media source and view its content. Basically if you dont have
a codec, you cant observe the content of the media. If you have a
VCR and want to play back a DVD, you are out of luck unless you get
a DVD Player. DivX and XVid Codecs are some of the very popular
codecs used on the net, but to get those, I still suggest getting
the K-Lite Codec Pack.
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Solution #4: Go back to Flash 7. If it aint broke dont fix
it. This Final alternative is only to be used as a last resort.
You'll have to get rid of Flash 9 and go back to Flash 7. The
really tricky part here is that you have to prevent Flash from auto
updating itself. If you install Flash 7, and hit up YouTube, you'll
immediately get Flash 9+ installed again with the same problems. So
AFTER you uninstall Flash 9 (use Macromedias / Adobes uninstaller,
yet again go google it) make a new text file and name it MMS.CFG,
in the file put this one line "AutoUpdateDisable=1" (without the
quotes) and put it in BOTH your c:\windows\system32 AND
c:\windows\system32\Macromed\Flash folders. This will prevent flash
from Auto Updating to 9+, then have to find some place to download
the old flash 7 installer. I found one here.
http://www.intercomm.com/downloads/Flash7.
Only problem is that most sites will try to make you install Flash
9 and Flash 7 does not work on all sites, but it does on some like
YouTube. DO NOT UPDATE TO FLASH 9+ IF YOU USE THIS METHOD.
You will probably want to IMMEDIATELY go to
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
after installing Flash 7 and UNCHECK the update feature
I've tried to write this quick little guide at 3AM so Im not
going to take more time to research other ways to fix this problem.
If you have other solutions, such as for MAC and LINUX, or feel
like adding on to something else that I've written here (links
would be useful to the downloads I suggested) or correcting any
mistakes I probably have made, please say so.
One of these solutions is bound to help you. Theres multiple
causes for this no audio problem so there is obviously multiple
fixes.

http://www.omahapokernews.org
http://www.holdempokernews.org
http://www.7cardstudplay.net
http://www.5cardstudplay.net
http://www.holdemspot.org
http://www.texasholdemstate.net
http://www.texasholdemstate.com
http://www.pokerbonuslist.net
http://www.pokerdownloadz.org
http://www.signuppoker.net
http://www.tournamentpokerz.com
http://www.pokercalculatorz.com
http://www.omahaodds.org
http://www.omahaouts.org
http://www.texasholdemrulesonline.net
http://www.onlineholdemtips.com
http://www.pokerhilo.net
http://www.poker-hilo.com
http://www.hilopokers.com
http://www.nolimit-holdempoker.net
http://www.texasholdemlimits.org
http://www.texasholdemlimits.net
http://www.onlinepokerlimits.org
http://www.onlinepokerlimits.net
http://www.onlinepokerlimits.com
http://www.texasholdemlimits.com
http://www.7cardplayer.net
http://www.5cardplayer.net
http://www.omahaacademy.org
http://www.omahapokerrooms.net
http://www.onlinepokerroomstop.net
http://www.playpoker-toppokerrooms.com
http://www.texasholdemz.com
http://www.playpokeronline-casinos.com
http://www.texasholdem-vip.com
http://www.gamble-poker-holdem.com
http://www.playpoker-holdem.com
http://www.onlinetexasholdem-poker.com
http://www.texasholdempokeracademy.com
http://www.vip-texasholdem.com
http://www.playfree-poker-online.com
http://www.texasholdem-pokerrooms.org
http://www.toppokerrooms.ws
http://www.toppokercasino.ws
http://www.onlinepokercasino.ws
http://www.playpoker-online.ws
http://www.online-texasholdem.ws
http://www.play-texas-holdem.ws
http://www.internet-texas-holdem-poker.ws
http://www.poker-player.ws
http://www.luckyschool.com

Audio problem in Adobe After Effects CS6

When ever i import a clip into adobe after effects cs6 the program does not read my clips audio i know how to ram preview its just the program doesnt read the audio what so ever but when i preview the clip on my desktop using windows media player it works fine and you can here the audio. My clips are recorded by my HDPVR Haupauge and it records in m2ts file someone please help me this is a serious problem with this program

Hi,
When you installed the full version, DId it install "Over" the existing one, or is it seen as a new installation (Sorry, I have never re-installed AE, so I am not sure of the way it works) - but coming from an IT background, sometimes installing a bought version, will overwrite all user settings that were set up in the trial.
In other words, recheck all the program user properties and audio check boxes to make sure the re-installation did not reset something to "off".
There are a few Audio discussions going around today, check the forum and give them a quick read to get a reminder of where all the possible Adio "on/off" switches are hidden.
Hope that helps
Pierre

IMovie audio problems when burning in Toast 6

Hi,
i've tried to burn an imovie project in idvd 5 but i get 'the error #-1 was reported' like most people have been and i've tried loads of things suggested to fix it with no joy.
I then sent the imovie project to toast titanium 6 where it burned fine. However, when i watched it i noticed that although toast had picked up all the audio (both dv audio and aiff), it did not pick up all the volume adjustments during the movie. how annoying! for example: i have an aiff clip that fades into a movie clip with the sound gradually going down but Toast picks up the sound staying at the same level. this also happens with volume adjustments in a DV file.
Any suggestions why this happens / how i can fix it?
Cheers,
Andy

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

Audio Problem from Analog video

Ok the basics are, I'm working with iMovie 4.0.1, Quictime 7.0.4 and video input from a vhs deck thru a Director's Cut DV converter box which is connected to my G4 via firewire and connected to the deck via the RCA jacks.
When Previewing the tape all is well and there's no perceivable issues.
Once imported into iMovie, there's a major audio buzz over the tape's audio making it unusable. I can hear the tape's audio faintly through the buzz. The video quality is fine. Any ideas on what's causing this? Third party apps, etc?
Thanks
Eric

Lennart, again you are the master. Your link led me to this link, http://www.miglia.com/Support/dctechfaq.html which tells me some unfortunate info.
For ease, here's their FAQ on the subject---
Q: When I import video with iMovie, the audio sounds fine during import. Once I play it back, there is a background noise that covers the audio track.
A: This issue is discussed in an Apple KB article: http://docs.info.apple.com/article.html?artnum=42979
One workaround under iMovie 3/4 is to extract the audio from the video in the timeline.
If you own a Director's Cut Take 2 with a serial number starting with 70xxxx or 71xxxx, you can purchase a firmware chip that provides a workaround for this iMovie issue.
Units with serial numbers starting with 72xxxx or 172xxxx have the firmware workaround already built-in.
Note that the firmware update is not compatible with the D-10 model manufactured by PowerR.
I called Miglia, which now handles PowerR converters under their own name, and they will sell me a refurb at discount since I got this converter VERY early on.
I will have to check with them to see if iMovie 5-6 addressed this issue and corrected it as upgrading is cheaper than buying a new converter, and extracting the audio isn't going to work for a lot of what I do. If anyone knows if upgrading to iMovie 5 or 6 fixes this issue, let me know! =)
Thanks again Lennart!

Premiere Pro CC Crashing when Scrolling Through Sequence in Timeline - Audio Waveform Goes Blank First

The description is in the title: Premiere Pro CC Crashing when Scrolling Through Sequence in Timeline - Audio Waveform Goes Blank First.
Just started today, won't stop crashing now after a minute or two, and always does it when I scroll through the timeline of a sequence. The audio waveform goes blank first.
What is going on?
Date/Time:
2014-10-22 12:16:16.078 -0400
OS Version:
Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: E1BCDCD7-6284-3012-9151-FF85491060DA
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x000000011d74b000
VM Regions Near 0x11d74b000:
VM_ALLOCATE
000000011d748000-000000011d74b000 [   12K] rw-/rwx SM=PRV
--> STACK GUARD
000000011d74b000-000000011d74c000 [
4K] ---/rwx SM=NUL stack guard for thread 4
Stack
000000011d74c000-000000011d7ce000 [ 520K] rw-/rwx SM=COW thread 4
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread

same problem of mine, as posted here:
Crash when scrolling the timeline
please find attached the crash report log, as requested.
Process:         Adobe Premiere Pro CC 2014 [3770]
Path:            /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
Identifier:      com.adobe.AdobePremierePro
Version:         8.2.0 (8.2.0)
Code Type:       X86-64 (Native)
Parent Process: launchd [225]
Responsible:     Adobe Premiere Pro CC 2014 [3770]
User ID:         501
Date/Time:       2014-12-22 16:33:25.725 +0100
OS Version:      Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: DC744912-A135-A02B-C2D3-75C4CA421CDD
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000011a46a000
VM Regions Near 0x11a46a000:
    VM_ALLOCATE            000000011a461000-000000011a46a000 [   36K] rw-/rwx SM=PRV
-->
    VM_ALLOCATE            000000011a46d000-000000011a46e000 [    4K] rw-/rwx SM=PRV
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x000000011a46a000
VM Regions Near 0x11a46a000:
VM_ALLOCATE 000000011a461000-000000011a46a000 [   36K] rw-/rwx SM=PRV
-->
VM_ALLOCATE 000000011a46d000-000000011a46e000 [    4K] rw-/rwx SM=PRV
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.adobe.HandlerTimeline.framework 0x000000010c2b31f4 HandlerTimeline::TimelineMediaIconManager::DrawAudioWaveform(UIF::DC&, ASL::ParamRect<int> const&, ASL::ParamColor<RGBColor>, unsigned int, unsigned int, ASL::InterfaceRef<ASL::ASLUnknown, ASL::ASLUnknown>, bool, std::vector<bool, std::allocator<bool> > const&) + 1620
1   com.adobe.HandlerTimeline.framework 0x000000010c1dc4f5 HandlerTimeline::AudioTrackContentView::DrawWaveform(UIF::DC&, ASL::ParamRect<int> const&, ASL::ParamRect<int> const&, ASL::InterfaceRef<BE::ITrackItem, BE::ITrackItem>, unsigned int, ASL::InterfaceRef<ASL::ASLUnknown, ASL::ASLUnknown>) + 2661
2   com.adobe.HandlerTimeline.framework 0x000000010c1dafb3 HandlerTimeline::AudioTrackContentView::DrawTrackItemWaveform(ASL::InterfaceRef<BE::ITrac kItem, BE::ITrackItem>, dvamediatypes::TickTime const&, int, ASL::InterfaceRef<ASL::ASLUnknown, ASL::ASLUnknown>) + 2131
3   com.adobe.HandlerTimeline.framework 0x000000010c2b447d HandlerTimeline::TimelineMediaIconManager::HandleWaveformNotification(int) + 429
4   com.adobe.HandlerTimeline.framework 0x000000010c2b53b0 HandlerTimeline::AsyncRequestNotifier::ListenToMessage(ASL::Message const&) + 176
5   com.adobe.ASLMessaging.framework 0x0000000100e1fb97 ASL::Broadcaster::BroadcastMessageInner(ASL::Broadcaster::ListenerRecord const&, ASL::Message const&) + 39
6   com.adobe.Frontend.framework   0x000000010006b039 FE::ApplicationErrorManager::ExecuteFunctionWithTopLevelExceptionHandler(boost::function0 <int>) + 41
7   com.adobe.ASLMessaging.framework 0x0000000100e1f71f ASL::Broadcaster::BroadcastMessage(ASL::Message const&) + 1695
8   com.adobe.ASLMessaging.framework 0x0000000100e25e9a ASL::StationUtils::BroadcastMessage(dvacore::utility::ImmutableString const&, ASL::Message const&) + 42
9   com.adobe.dvacore.framework   0x00000001003c763c boost::function0<void>::operator()() const + 28
10 com.adobe.dvacore.framework   0x00000001003c8f4c dvacore::threads::(anonymous namespace)::FunctionQueue::ExecuteOneFunction(boost::shared_ptr<dvacore::threads::(anonym ous namespace)::FunctionQueue>, bool) + 124
11 com.adobe.dvacore.framework   0x00000001003c9a4c boost::detail::function::void_function_obj_invoker0<boost::_bi::bind_t<bool, bool (*)(boost::shared_ptr<dvacore::threads::(anonymous namespace)::FunctionQueue>, bool), boost::_bi::list2<boost::_bi::value<boost::shared_ptr<dvacore::threads::(anonymous namespace)::FunctionQueue> >, boost::_bi::value<bool> > >, void>::invoke(boost::detail::function::function_buffer&) + 60
12 com.adobe.dvacore.framework   0x00000001003c763c boost::function0<void>::operator()() const + 28
13 com.adobe.dvacore.framework   0x00000001003c9b02 dvacore::threads::(anonymous namespace)::RunLoopAdaptor::Execute(__CFRunLoopTimer*, void*) + 18
14 com.apple.CoreFoundation 0x00007fff8b7ae3e4 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
15 com.apple.CoreFoundation 0x00007fff8b7adf1f __CFRunLoopDoTimer + 1151
16 com.apple.CoreFoundation 0x00007fff8b81f5aa __CFRunLoopDoTimers + 298
17 com.apple.CoreFoundation 0x00007fff8b7696a5 __CFRunLoopRun + 1525
18 com.apple.CoreFoundation 0x00007fff8b768e75 CFRunLoopRunSpecific + 309
19 com.apple.HIToolbox 0x00007fff93049a0d RunCurrentEventLoopInMode + 226
20 com.apple.HIToolbox 0x00007fff93049685 ReceiveNextEventCommon + 173
21 com.apple.HIToolbox 0x00007fff930495bc _BlockUntilNextEventMatchingListInModeWithFilter + 65
22 com.apple.AppKit 0x00007fff8e47924e _DPSNextEvent + 1434
23 com.apple.AppKit 0x00007fff8e47889b -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
24 com.apple.AppKit 0x00007fff8e46c99c -[NSApplication run] + 553
25 com.adobe.Frontend.framework   0x00000001000d302d FE::MacApplication::RunSelf() + 45
26 com.adobe.Frontend.framework   0x0000000100047e98 FE::Application::Run(std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&) + 4328
27 com.adobe.Frontend.framework   0x00000001000d4944 FE::AppMain(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int, void*) + 276
28 com.adobe.Frontend.framework   0x00000001000dbbe5 FE::Run(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int) + 581
29 com.adobe.AdobePremierePro     0x00000001000018ac main + 508
30 com.adobe.AdobePremierePro     0x00000001000016a4 start + 52

10.4.9 - Major audio problems with digital audio

I have a Digital XMPCR radio with Edirol MA-20D Digital speakers
I now have major audio problems, the audio is garbled and doesn't sound as strong. Kinda like a FM radio in a car that is loosing signal when you are traveling.
I use this XMPCR for a couple of hours a day and had no problems this morning prior to installing the update.
I have a XMPCR that was modified for Toslink/Digital connection. I connect the XMPCR to my Mac Pro 2.66 with toslink cables and connect my Edirol MA-20D digital speakers with toslink cables. I use Amoeba's "LineIn" for audio pass through.
I thought it might me the FTDIUSBSerialDriver so I reinstalled it, did not fix the problem.
I also have a real bad "buzzing" sound going on in the background. When I quit JXM (the application for changing channels on the XMPCR), the "buzzing" goes away but I have a rapid ticking sound coming out of the speakers until I quit LineIn.
Anyone else have any problems with their digital audio input/outputs?

I dont use the digital XMPCR radio, but I use Digital Performer to record audio and MIDI and I use exclusively the Built-In Audio input and Output and everything is working fine after the 10.4.9 Upgrade.

After 10.6.4 update, some audio not going through

After the 10.6.4 update I've been having trouble with some audio not going through the USB headset.
Things that refuse to go through the headset:
* Empty trash noises
* Skype notification noises
* iChat alert noises
Things that are working:
* Coloquy
* iTunes
I've tried toggling the System Preferences obviously. Unplugging speakers and USB headset and plugging back in a number of times (this seemed to fix some things, not others).
Anyone else having the same issue?
(Note to forum mods: you need to add 10.6.4 to your OS dropdown)

Reseting the PRAM has solved this problem.
http://support.apple.com/kb/ht1379

Adobe Premiere Pro CS5.5 Audio Problem

Hi guys kinda new to Premiere pro, but first time this has even happened to me.
See f ica explian this well.
Ok so i've been editing up loads of gaming footage late all from my Hauppauge Gaming Editon 2. Never had a problem till now, there a clip for some reason the audio is so crazy out of whack its impossable to even try and resync you're self. Like there some bit of it where the near end of the clip auido plays in the for 3 mins then it goes back to being like 20 seconds out of sync. It plays fine in Windows media player and quick time but in adobe it goes NUTS!
All the other cilps are fine just this one clip has gone crazy on me.
Any ideas how to fix this.
Ask away and i'll answer everything i can to the best, need to get this fixed to get this video finish asap...
Thanks.

yea i am using the right sequence
here are 4 screen shots of 2 different things i was editing, both used to record my xbox 360 with Hauppauge, Seems adobe is the only program playing the video file with the audio out of sync/mixed up
[URL=http://imageshack.us/photo/my-images/803/screenshotlrh.png/][IMG]http://img803.imageshack.us/img803/1669/screenshotlrh.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/826/screenshot2yv.png/][IMG]http://img826.imageshack.us/img826/3012/screenshot2yv.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/841/screenshot3aa.png/][IMG]http://img841.imageshack.us/img841/7042/screenshot3aa.png[/IMG][/URL]
[URL=http://imageshack.us/photo/my-images/5/screenshot4on.png/][IMG]http://img5.imageshack.us/img5/6096/screenshot4on.png[/IMG][/URL]
The Yellow Devil May Cry video is the video with the audio problem,
The metal gear rising video is red because of the pic above it, and the sound works ok on that, infact that video is finished and uploaded to youtube now.

Audio problems going to tape

Similar Messages

Maybe you are looking for