Audio Problems Importing form Sonar 7

When I export something I've written from Sonar 7 In .aiff format, then import it into iTunes it plays fine until... I sync the song to my ipod Touch. It plays the song on my iPod way too loud, even in iTunes on my computer in my "iPod" playlist the song will play wrong, and in the "iTunes music" playlist play correctly. I can change the song in sonar 7 to sound better, export it again and import to iTunes again, and it play the changes I've made. However When I delete the old osng from the iPod and sync the new song, it will sound exactly the same. Very very frustrating. I export the songs from Sonar 7 in .aiff format, in 16 bit depth, 16 bitrate PC, and 44100 sample rate. can anyone tell why this is happening? Or possibly a better mp3 encoder than LAME that might correct this problem. Thank you soo much.

Thanks for the tip re: JPG v TIFF. And I've done a MP3 -> AIFF conversion now as well.
As it turned out, my problem was not a FCP preferences corruption, but was a matter of where the files came from...we were given a DVD with the still & audio files on them. When I copied those files from the DVD to our Server and then to the Raid hooked up to our Mac, the files would not import. If I went directly from the DVD to the raid, the files imported. Not sure how to make sense of that...but good to be aware of it, and hopefully if anyone else runs into this odd occurrence, this solves it for them...

Similar Messages

  • Audio problems importing Supertintin files

    We use Premiere Pro to edit small videos as part of our work, but none of us are professional video editors. We've been recording Skype interviews with Supertintin, which produces MP4 files.
    When we brought these into PP, we were getting horrendous audio drift, so we got Aunsoft video converting software as recommended by Supertintin. Converting the MP4s into MOV files before importing seems to fix the audio drift problem, but it brings in the stereo audio tracks as 5.1  and puts them into audio track 4.
    Is this a problem and are we doing something wrong? Thanks!

    I came across a similar problem with a video with 2 video tracks... the following worked for the video tracks (but no guarantees it's the same for audio.)
    Try this:
    Import the clip into FCPX -- for now, don't transcode anything (uncheck everything in the import dialog).
    Once the clip is in FCPX, right click and select Open in Timeline.  See if both your audio tracks are in there. The overdub might be disabled (if it's in there.) You should be able to switch them by selecting the French track and typing V, and re-enable the English track by selecting it and typing V.
    If you have Quicktime 7 Pro, you can verify if all your tracks are included with the video by opening the file, typing Command - J  to open the Properties dialog. You should see a table with columns Enabled, ID, Name etc. -- the Enabled column is a checkbox. The ID will usually be a sequential value for the track number and the Name column will be something like Video Track, Sound Track, Text Track, etc... so you can identify which track is what.
    I'd hold off merging audio tracks until you figure out if you actually need to or not. At worst, you might have to export two different versions of the video.

  • AVCHD Audio Problem Importing to CS4

    I have imported several AVCHD clips to CS4.  Occasionally one clip will play the video and audio OK for a part of the clip and then the audio blanks out.  In the Audio timeline I can see the audio waveform displayed, but it does not play.  I have tried cutting the clip and dragging it again to the timeline but it doesn't play. The audio in the clip played most of the way through the clip but blanked in the last15-20 seconds.  This has happened previously to other clips. I have played the clip in the source monitor and the same thing happens, always at the same point in the clip.  I deleted the clip from CS4 and re-imported it and all was well this time.
    Any ideas about this?  As I said, I can see the waveform in the timeline, so I know it imported with the complete audio.  Why won't CS4 play it.  I am using the 64-bit Windows Vista Ultimate with 4gb of RAM and a quad 2.26gb processor.  The video files are all on a dedicated 360gb hard drive.
    Roy

    They were imported as .avi files via firewire through my VX2100 Sony Camcorder, edited in Premiere, exported out as an entire .avi sequence and authored in Encore. The audio is fine when the final DVD is played by my customers and played back on the timeline, but when I try to import the authored DVD back into Premiere to capture a few clips that are needed later on, that is when I get the massive distortion on the audio.
    Everything is fine up until the point of recapturing the authored DVD back into Premiere from Encore.
    Thanks

  • Help urgently needed: bizarre problem - no audio in imported clip!

    Hey there!
    I have a bizarre - never the less urgent problem:
    When I import some material (presentations) which I have recorded on Mini DV with my Canon MVX10i Camcorder the following problem occurs:
    There is one particular presentation which somehow looses the audio during the import process!
    That means the imported clip has no audio even though the audfio is on tape! Other clips before and after do not have this problem - the audio is available after the import.
    A bizarre but serious problem for me. Any suggestions?
    Thanks a lot in advance
    Thorge

    I had a similar problem. When I started the tape from the beginning no audio would import. To solve it I started the tape a few seconds in and It seemed to work.
    Hope this helps.

  • Problem Importing Audio in Vista

    When trying to import audio into Captivate 2.0 in Windows
    Vista I get the following error
    "Unable to decode and import the selected wav/mp3 file"
    I check to see if the file might have been curupted, but
    plays fine inside of my media player. The thing that gets me is
    when I import the audio on my Windows 2K machine, I never get an
    error and it the audio is imported with no problem.

    Vista is not a supported operating system (OS), so to what
    extent that might be the problem is a question-mark to me.
    However, not all WAV files are supported in other (supported)
    Windows OSs'. Assuming you are importing a WAV file, check to be
    sure the WAV file is "PCM" formatted.
    NOTE: PCM is one of many formats that fall under the general
    "type" of audio file with the extension "WAV", and is the supported
    type for Captivate imports.
    Let us know if that helps.
    .

  • Audio problem when importing video files.

    Hello everyone,
    I just started using FCP X a few days ago for a university project and I seem to encounter an audio problem when importing videos in .mp4, .mov format or via the import from camera option.
    Indeed I need to import videos in .mp4 and .mov format into FCP X. The import in itself is normal I can see my videos into the events/clips library and if I play them from the library I can hear the sound quite perfectly.
    However, when I want to edit my videos and put it in the timeline, there is no audio. As a result I started to think that my videos could be the problem so I tried the option "import from camera" option using the Isight camera of my macbook pro but the same things happened. I could hear the sound from the events/clips library but not from the timeline (I can't see any audiowaves in the timeline).
    I found a solution using quicktime and extracting the audio of the video in .m4a then importing the videos files and the audi files corresponding but it's a long process and a waste of time  as FCP X should be able to import the audio of my video into the timeline directly. Especially if it can read it from events/clips library.
    I hope I explained myself clearly and you could help me resolve my problem.
    Cheers
    Christophe
    PS: I'm using FCP X version 10.0

    Update to 10.0.5.
    You have an incorrect setting when you edit. Try trashing your preferences. Post screen shots of your timeline and toolbar.

  • Audio problems in video imported fro iphone4

    I imported some videos made on iphone on a windows XP - without using itunes.
    Now the videos present audio problems in avidemux.
    If I convert them using Handbrake in several formats (e.g. avi), I can't manage to make them readable by Windows MovieMaker

    Is there a way to extract the audio so I can clean it up using Sound Soap
    iMovie 06 has some good filters for that.
    I also use Final Cut Express, so maybe it would be better to just export it to FCE and then extract the video from there?
    Final Cut Express (or iMovie 06) will give you better quality but it won't solve the buzzing noise. I also suspect a grounding problem.

  • Audio problems with import

    I am using a jvc gz-mg 155u camera and have made 2 previous movies with no audio problems.
    I have about 1 hour of video in many different clips that i am trying to import.
    1) Not all of the clips "thumbnail" when the import window opens. when i click on any clip in the import window, the audio plays.
    2) When i play the video on the camcorder, the audio plays
    3) When i import the video clips, some of the initial clips have audio associated with them, but the latter clips do not.
    In summary, it has worked fine before. Only some of the clips work now when imported and audio works fine in playback on the vid cam.
    I just returned from costa rica and i am very anxious to build my trip movie.
    any suggestions??

    Thanks for the fast reply. Much appreciated - I have found other reference to this since reading your reply, and I can see this should fix my problem.

  • Hello: I am using OSX 10.9.3 Lightroom Version 5.4 Camera Sony A77...Problem: importing the foots form chip or from the camera the GPS-position is not shown in lightroom. Using the bridge there they are. What have I do do? Thanks

    Hello: I am using OSX 10.9.3 Lightroom Version 5.4 Camera Sony A77...Problem: importing the foots form chip or from the camera the GPS-position is not shown in lightroom. Using the bridge there they are. What have I do do? Thanks

    Please read this: Adobe Lightroom - Find moved or missing files and folders
    You do not want to be in the Import section of Lightroom, you want to be in the Library Module. You don't want "Update Folder Location", you want to ctrl-click on a Folder name (not in Import, but in the Library Module Folder Panel) and select "Find Missing Folder"
    You do not want to re-import photos that have already been imported, this is almost always a bad thing to do.

  • Audio problem

    I'm new to After Effects so I'm starting with After Effects Classroom In A Book CC lesson, Yesterday all the media and audio I imported worked fine and playback without any problems. Today when I open the lesson the audio would not play. So I try to import other audio into a new project but it did not play either. for some reason the audio tracks are not working in After Effect Please help

    How are you trying to preview the audio?
    Are you using the . key on your number pad to initiate an audio preview?
    Are you pressing the 0 key on your number pad (or pressing the RAM preview button in the preview pane) to initiate a RAM preview?
    Or are you pressing spacebar to start a playback without audio or caching?

  • Problems importing sound

    I'm trying to import .aiff (22.050  24bit) into the Director Cast, but Director (12) keeps crashing while importing them. I intially did a batch import, but am now importing them one at a time - a couple have imported, but I'm having to force quit Director and try re-importing several times before I can import a file. Has anyone else had problems importing sound into Director 12?

    24 and 32 bit audio are not supported. Try 16 bit:
    http://helpx.adobe.com/director/using/publishing-ios-devices-using-director.html

  • Problems importing from sony HDR FX7

    hi forum.
    i'm having problems importing audio from my camera into i-movie.
    during import there is no sound coming from my computer, but there is sound coming from my camera. after import when i play back the clip i just imported, the sound is morphed. its like the pitch has been turned down in the audio file, except no effect has been done on it.
    if anyone out there has a similar problem, or a soulution please let me know as i am ready to throw my mac out the window!
    john lawlor

    OK i think i get what you are saying but....
    will the cound correct itself while it in in imovie. in other words will i be able to edit and listen to the audio as it is supposed to be?
    what concerns me it that after i noticed this probem, i tried exporting it as a quicktime file, thinking that the wound would be OK, but after it finished exporting, the quicktime file was exactly the same. the sound was morpehd on it also.
    could it be the settings on my camera?
    john lawlor

  • Problems importing AVCHD clips from Panasonic GF1

    I'm having problems importing clips from my new Panasonic Gf1. FCE (4.0.1) sees the device ok, and selecting and previewing the clips in the log and transfer window works fine, but once the clips are in FCE (converted to AIC) they play fast in the viewer or when placed in the sequence. Strange, because they play fine in the preview window before importing. Tried this in iMovie 08 and get the same effect.
    I'm can convert them Toast to AIC and they work fine when imported to FCE but this is not my preferred workflow.

    I tried using Toast Titanium 10 for conversion as suggested but there was a slight issue with synch of video and audio. So I downloaded and bought Voltaic HD as suggested elsewhere and the AVCHD files of the Panasonic GF-1 are now playing in Final Cut Express 4 without issues - I am editing with no problem. Given that I can use the Log&Transfer Window (Final Cut 4) for my Olympus EP1 and my Panasonic HD video cam, it's odd that the files of the Panasonic GF-1 don't work in Final Cut (yet), but at least I am back editing. Voltaic HD was $35, a doable expense.... it does work flawless (so far).

  • Problems importing and playing songs from an external cd/dvd drive

    I am having problems importing songs on my PC from an external usb drive. What I have is an external combo usb firewire drive hooked up to my pc with a usb cable. (usb 2.0) When I launch itunes, it sees the cd I have loaded but when I go to import the songs, itunes just pops past each song in a second like each song was just a second in length. Then I have some corrupt file in my itunes library. Itunes gets the cd names and titles from CDDB correctly but can't play the songs or import them. I use this pc solely for playing audio, it is a Pentium 4 2.6 with 1GB of ram with build in usb 2.0 on the motherboard. There is no other software installed on the system other then virus software. When I use Windows Media Player the cd is read perfectly fine. I even play DVDs off the drive with no problems too. This problem in intermittent, with different cds. These are all commercial cds not burnt ones that someone made for me. Any help or suggestions would be appreciated.

    Hi Toonz - I have exactly the same problem when trying to import songs - itunes does recognise the cd drive and names of tracks etc - it just won't play more than one second of each, or import any more. i did run the cd diagnostic check you suggested - results below - don't mean anything to me i'm afraid - any bright ideas?
    this was a christmas present and i haven't managed to put any new music on apart from what was already on our pc, so am v sad and hope you can make it better....
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    ASUSTeK Computer INC. A7N8X2.0
    iTunes 6.0.0.18
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: RADEON 9500\RADEON 9500
    IDE\DiskMaxtor6Y120P0_________________________YAR41BW0, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomATAPICD-RW_52XMax______________________150D___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomSONYDVD-ROM_DDU1612____________________DYS1___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SONY DVD-ROM DDU1612, Rev DYS1
    Drive is empty.
    E: ATAPI CD-RW 52XMax, Rev 150D
    Audio CD in drive.
    Found 14 songs on CD, playing time 65:08 on Audio CD.
    Track 1, start time 00:02:00
    Track 2, start time 00:17:42
    Track 3, start time 04:59:28
    Track 4, start time 12:35:43
    Track 5, start time 16:11:73
    Track 6, start time 22:46:73
    Track 7, start time 28:23:27
    Track 8, start time 32:37:70
    Track 9, start time 37:46:01
    Track 10, start time 42:35:14
    Track 11, start time 46:22:32
    Track 12, start time 50:29:14
    Track 13, start time 55:20:60
    Track 14, start time 60:46:54
    Audio CD reading failed. Error Code: 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110 1110.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 12 16 20 24 32 40 48 52.
    The drive CDRW speeds are: 4.

  • Having problems importing my .mov file.

    I am having problems importing several .mov files into iMovie. I also can't import .wmv files and I have been utterly confused. I know I have to convert the files but I don't want to pay for a program because I will only be converting 4 files. Please help!

    What is Mpeg Streamclip
    It is a free conversion application that accesses the QT structure and all installed QT components without having to pay the $30 for QT Pro or purchasing GarageBand. It's "engine" is MPEG-based, so it can do some things that QT Pro cannot do ( e.g., retaining audio content when converting multiplexed compression formats). On the other hand, it cannot perform layer operations like QT Pro can so these applications are somewhat complementary.
    and is there anyway you can send me a link to download this program please?
    MPEG Streamclip

Maybe you are looking for