Audio problems in iMovie11 after exporting

Hey everyone!
I have been suffering from a problem that I have no clue how to fix. So I created my video 9min long with all sorts of stuff (logos, various songs, voicerovers, detached audio, attached audio haha, cutaway picture, etc etc) and everything is fine with the sound while its still in the library. The movie is made and ready to export. BUT when I export and create a .mov file (HD 780 or 1080) the sound gets messed up and sudden gaps of silence appear out of nowhere. Usually those gaps appear at the end of the clip. Also the more I export the movie the more problems it appears to have..... So now besides the silence gaps, in 2 scenes the sound goes like you're under water for a second or so, and then goes back to normal. AGAIN this happens ONLY after exporting. Before rendering everything is fine on my imovie, sound is in tact and whatnot. But after exporting I face these issues that I have to solve somehow..
Please help someone, it's urgent!
Thank you in advance.

Extract, or detach, the audio and make sure the audio is in sync.

Similar Messages

  • Export videos to YouTube but audio isn't there after exporting

    I exported my video to YouTube via Quicktime but audio isn't there after I go to the YouTube link. I turned up my volume all the way but no sound comes out. I JUST upgraded to Mac OS X 10.6.8 TODAY ON JUNE 23RD! Has anyone else experienced this AFTER upgrading to 10.6.8? With 10.6.7 I could export videos perfectly. AND AFTER upgrading to 10.6.8, it takes FOREVER for the video to export to YouTube. It takes hours!

    OK so I tried a few more videos. The first had the problem but the several more I tried a few more and they worked fine. Then I went back to the first and it started working fine again. So the problem seems to have gone away.

  • Audio sounding Dull & low - After export

    Hi there,
    I'm editing in Premiere Pro CS4. If you see the images below, it will tell you a bit more about the system and settings I'm using. I gave my customer a DVD and she complained about the audio. I asked her to email me the description of what she wasn't happy about, and she wrote this: 'with the audio the sound quality was lost it wasn't crisp and clear. And the base and beats were very low. Came out as very dull sound'. Now I agree with her. One of my fellow editors who uses another system produced a video, and imediately I noticed how wonderful the sound was. I could feel the base and hear more of the instruments.
    My original audio peaked like this:
    I asked someone what was the best level to put it at and they said let it peak at -6. So now my audio peaks like this:
    After the complaint, I asked a few more people, and they said that the green level of the audio should be reaching level 6. So now my audio peaks like this:
    Now I'm not sure if the above settings have fixed the problem, but at least on the computer it sounds better.
    This is the version of Premiere I'm using:
    This is some info about my computer:
    File properties before export:
    File properties after export:
    Project settings:
    These are my export settings:
    I hope this is enough information and I appreciate any help. Let me know if you need me to gather more info.

    haha very funny.
    Certainly not. :-) I've actually noticed it even before she mentioned something to me. Maybe I'm mistaken. You sound as though nothing should be wrong with my audio. Is that right? Judging from my settings.

  • Problem with image after exporting from Lightroom 5

    Good day. Please can someone help me? I have Lightroom 5, and I have a problem in exporting edited images. At issue, do all the necessary settings and retreat noise and sharpness adjustment by brush adjustment tool, however, to export the image, noise and some minor adjustments are lost. Because in Lightroom visualize the way you wish, but after export, is not it the same? How do I get a different result? Thank you all!

    I have the same problem!
    Something got broken with my Lightroom 5.6 (Windows 7Pro)  two days ago and I don't see any adjustments made with brush after exporting photos!
    It's not a problem of library or RAW files - the same, work fine on other computers (iMac).
    I tried to clean the computer with CC Cleaner Tool, and install everything again, but it didn't help.
    I already lost 2 days trying to fix it, and I don't want to format the drive and install Windows again
    Can anyone help?

  • Weird audio problems with Motion when exporting quicktime videos

    I have a Motion project with 2 video clips of people talking. When I create a RAM preview everything plays back fine. When I export a quicktime, the first second or so of each video clip (within the quicktime) have no audio. I've adjusted the in and out of each clip in Motion but I don't think that would make the audio disappear on export. Thinking it was just a bad export, I tried just exporting the audio and the same thing happens.
    Here's what i'm using:
    Mac Pro dual 3.0 Xeon
    10 gigs of RAM
    Motion 2.1.2

    hi,
    motion 2 had some odd audio problems that surfaced now and then. The only way round it was to bring the clip into FCP and edit the audio in there, and then export from fcp.
    Motion 3 might have fixed this. Not sure havent had the problem for some time, since I make sure all finnishing is done in FCP.
    hope this helps
    adam

  • Audio out of sync after export!

    I've exported this video I've been working on several times under different conditions, no effects, no transitions, no additional media, different formats between AVI, MPEG, H.264, I've uninstalled and re-installed premier, running as administrator.  I have done everything in my known knowledge of troubleshooting to figure out why after exporting this video my audio sync is off by two seconds, nothing I've done has worked.
    Video Source
    AVI
    1920x1080
    60 fps
    I'm matching the source as export other times I've not, again I've tried multiple combinations.
    I'm running Adobe Premiere Pro CC 2014
    Computer Specs
    Windows 7 - 64bit
    AMD FX-8320 Eight-Core 3.5GHz
    8GB RAM
    AMD Radeon R9 200

    AVI is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
    Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    https://forums.adobe.com/thread/1070933 for screen shot instructions
    Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
    Does your video use a VARIABLE Frame Rate or a Constant Frame Rate?

  • Slideshow audio timing is off after export to QT movie

    I created a slideshow in iPhoto and put one song with it. I times all the slide durations so that the music would fade out exactly at the end. After exporting to a QuickTime movie, however, the slideshow is finished before the song is... the song is off by at least ten seconds.
    I believe I get better image quality if I do the show in iPhoto as opposed to iMovie, which is why I used iPhoto to begin with. But if the show will not synch, what other choice do I have?
    Any suggestions?

    Did you take into account the transition times. That has thrown me off a number of times. Do you have the Fit Slideshow to music option selected?
    Another application that creates, IMO, terrific slideshows is PhotoPresenter. It has 25 or more themes and can save the slideshow, with Fit slideshow to music, to a variety of formats, QT, for iPod, HD, etc. This is one of their many themes.
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Audio out of sync after exporting into Quicktime using current settings.

    Quicktime file has audio out of sync when I export to quicktime movie using current settings.
    Ok for about the first few minutes then, out of sync after about 10 minutes.
    I shot the footage on tape with my Sony HVR-Z7u.
    My Sequence setting is the same as the format of the footage as shown below.
    Pixel Aspect Ratio: HD 1440x1080
    Editing Time base: 23.98
    Quicktime video settings: Compressor: HDV 1080p24
    Audio Settings: Rate 48 KHz
    Depth: 16bit
    Clip format:
    Pixel Aspect Ratio: HD 1440x1080
    Vid Rate: 23.98
    Compressor: HDV 1080p24
    Audio Rate 48 KHz
    Audio Format: 16bit

    I recently moved and both of my editing machines were unplugged for a couple of days until I could get them set up. After turning them back on, the problem had disappeared. Perhaps leaving the system unplugged had allowed some of the internal components to reset? That's the only thing I can think of. At any rate, the issue is gone.

  • Audio problems and more after updating to 10.4.3

    After taking an OS X update to 10.4.3 from 10.4.2, I've got static instead of audio. This happens no matter what program I'm using: Bias Peak 4.14, iTunes 6.0.1, Apple DVD Player 4.6, QuickTime 7.0.3. I'm even getting static on system sounds (empty trash, delete file, etc). If I open 'Sound' in System Prefs, I'm treated to continuous static...
    My sound card settings have not changed - it's an M-Audio Audiophile 2496 running driver version 2.0.4. I've tried contacting M-Audio tech support but they're closed on weekends.
    Everything was ok before I took the update. Now i've got the static and other weird problems as well:
    If I try to play a .vob file from a commercially pressed DVD using VLC Media Player, I get the following error message "read failed - permission denied". Anything from a recordable DVD is fine (except for the audio).
    If I try to backup any file from a commercially pressed DVD, the file doesn't copy and an error message appears: "The operation cannot be completed because you do not have sufficient privileges for some of the items". I double-checked with a DVD that I had previously backed up successfully using the same method and now it doesn't work.
    Any thoughts or suggestions will be most welcome.

    This was resolved by repair disc

  • Audio problem in Adobe After Effects CS6

    When ever i import a clip into adobe after effects cs6 the program does not read my clips audio i know how to ram preview its just the program doesnt read the audio what so ever but when i preview the clip on my desktop using windows media player it works fine and you can here the audio. My clips are recorded by my HDPVR Haupauge and it records in m2ts file someone please help me this is a serious problem with this program

    Hi,
    When you installed the full version, DId it install "Over" the existing one, or is it seen as a new installation (Sorry, I have never re-installed AE, so I am not sure of the way it works) - but coming from an IT background, sometimes installing a bought version, will overwrite all user settings that were set up in the trial.
    In other words, recheck all the program user properties and audio check boxes to make sure the re-installation did not reset something to "off".
    There are a few Audio discussions going around today, check the forum and give them a quick read to get a reminder of where all the possible Adio "on/off" switches are hidden.
    Hope that helps
    Pierre

  • Audio/Video sync issues after exporting

    Two quick issues:
    1. I've recently exported a project from FCE4 to quicktime and am finding that the audio is slightly out of sync with the video everytime.
    Is there an ideal format or setting I need to export at to avoid this?
    2. Also, I've edited two projects using the same clips and keep finding that the second one I make seems to make the video very narrow when I export it. Is there a setting I need to use to avoid this, or does the problem lay in the setup?
    Cheers!
    John

    From what I see in your info, the clips don't match the Sequeunce.
    Furthermore, the clips are not FCE freindly. Probably required rendering?
    I'd suggest using Streamclip to convert the H.264 clips to the exact specs of one of the FCE>Easy Setups, audio and video properties, then start over.
    http://www.squared5.com/
    BTW: Whatever you convert the clips to must match the Easy Setup, so that you work with Clips and Sequence being the same. The best way to acheive this is to start a NEW Project, set the Easy Setup first, then bring in the the matching clips.
    Using Item Properties in Browser>Seqeunce/Clip is one way to confirm matching specs for both.
    Al

  • IMovie problem - shaky video after exporting

    I'm trying to make a DVD from some video I shot of a wedding. The movie looks great in iMovie 09, and I simply want to burn it to a disk. The problem is that some of the video clips in the movie become terribly shaky after I export it to iDVD or to QuickTime. I don't know how to stop this - I have the movie just the way I want it in iMovie, but it's practically worthless once I export it. The video is from a new Samsung HD camcorder, model HMX-H200. I think I shot the video in HD. I'm using iMovie 09 and iDVD version 7.0.4. Would appreciate any suggestions!

    Nope -- you have your answer.
    Sounds like you want to put data files (movies) onto a data holder and play it from there.
    I like File - Export - Quicktime Conversion - Change Default to BROADBAND HIGH and hit the options button and change the SIZE to 480x270 if you want widescreen or leave it as is for 4:3.
    Those should play fine on data media like a CD or a data dvd.
    NOW -- if what you really want is your media saved on a DVD so you can play it on a set top DVD player (or any dvd player for that matter....) that's another story.
    Is THAT what you want to do?
    Else - pull the media you've saved on the DATA media and put it on your HD... will play fine from there.
    CaptM

  • Audio tracks are clipped after export to Quicktime

    I have a small (16 slides) keynote file that runs perfectly in Keynote.
    I have individual voice audio files for each slide as well as a seperate "master" soundtrack running in the background.
    When I export to QT the individual voice audio track is clipped off at various times on each slide. The slide's other transitions continue to run with the background music playing just fine. The next slide begins as expected, playing all sound files, until the individual voice audio file is cut off again.
    Exporting at different resolutions seems to produce the same frustrating results.
    The background music is a QT movie file. The voice-over is an Mp3.
    Thanks for your help.

    Doesnt solve the problem. the soundtrack is synced at first but then is progressively, increasingly out of sync. A couple of seconds late on a 7-minute film.
    Message was edited by: aaSwebmaster

  • Problem with video after exporting

    Hey, I finished my project and exported it to a quicktime file and it looks really good and plays fine. My problem is that every time I try to put it on a CD, DVD or memory card it always plays fine for a few seconds then freezes as the audio keeps going. Then I can skip ahead and it will play a little more then freeze and glitch a lot.
    I don't even know if this is final cut related, but does anyone know what the problem is?
    I am exporting another version to try but it takes a while.
    Thanks
    Spencer

    Nope -- you have your answer.
    Sounds like you want to put data files (movies) onto a data holder and play it from there.
    I like File - Export - Quicktime Conversion - Change Default to BROADBAND HIGH and hit the options button and change the SIZE to 480x270 if you want widescreen or leave it as is for 4:3.
    Those should play fine on data media like a CD or a data dvd.
    NOW -- if what you really want is your media saved on a DVD so you can play it on a set top DVD player (or any dvd player for that matter....) that's another story.
    Is THAT what you want to do?
    Else - pull the media you've saved on the DATA media and put it on your HD... will play fine from there.
    CaptM

  • Sound Problem with Imovie09 after export to idvd

    Hi !
    When I export my project to IDVD, I've got problem with the soundtrack of my project,the original sound of my videos disappear, I can hear "ghost" sounds (like wind) of my videos but at wrong place in the project. It doesn't appear in the timeline of imovie.
    Can someone help me ?

    Hi, Paul,
    iMovie 'renders' slo-mo in a way that you don't really want--as you discovered. So, get your movie into iDVD without letting iMovie render it. Try doing it this way:
    Instead of sending your iMovie to iDVD from within iMovie, close iMovie.
    Open iDVD, and create a new project. Click on the 'custom' button, and navigate to the 'Media' tab. Select 'Movies' and find your iMovie in the little window. Drag it onto the iDVD screen. Be sure not to put it into a drop zone. Then, make the titles and buttons the way you wish.
    Save the DVD as disk image. You can play that after it is finished to see if the sound is what you want. If so, go ahead and burn your DVD.
    Hope this helps!!

Maybe you are looking for