Audio Problems when setting default device

Everytime I try to set my headphones as the default sound device, my computer won't allow me to. I even tried to troubleshoot it, and it came up with the resolution of setting my headphones as the default device, but it failed to due to an error.
It only occurs whenever I use the program Mumble, as I am a gamer and I use it to communicate with my fellow gamers. So whenever I fire up the program, all other sound except what comes from it, goes to my speakers. I don't know if this has to do with the program Mumble itself, or the fact that I LITERALLY cannot change my default device. Please help?

What version of Windows are you using?
Also, could you please give me the exact model number of your notebook?
You can use the following document if you need assistance in finding it.
http://h10025.www1.hp.com/ewfrf/wc/document?tmp_renderType=findModel&cc=us&dlc=en&docname=c00033108&...
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Similar Messages

HELP Audio problem when setting windows volume at max and media player at max

im using msi eclipse x58
whenever i set my windows volume at max and media player at max also, after few seconds it suddenly not hearing audio but my media player is still playing
on other applications like skype wenever i set windows volume at max and after few seconds of voice chat with my friend the error says audio device disconnected.
On game applications while playing game same thing happens audio is gone
it is really stressful can someone pls help me out thanks

Quote from: NovJoe on 17-February-10, 17:01:40
Please list out your full system specs and PSU specs amps for verification first.
My Power Supply is Cooler Master Real Power 550W
i7 core 920
Nvidia GTS 250
hard drive
320gb
640gb
2x 2gb 1333 ddr3 ram

Obiee 11g . problem with set default as columnname in interaction tab

Hi Obiee gurus ,
I have small problem with set default option in interaction tab in column properties. actually my problem is , i changed one column bold save as set default option bold and how to revert back to my column option. when i create new analysis with same name . it takes set default option for that column.
can Please give some suggestion for this problem.
regards
Srinivas

Hi Srinivas,
i guess this will be same for 11G
Refer
http://blogs.oracle.com/siebelessentials//2008/08/remove_systemwide_default_sett.html
thanks,
Saichand.v

Audio problem when importing video files.

Hello everyone,
I just started using FCP X a few days ago for a university project and I seem to encounter an audio problem when importing videos in .mp4, .mov format or via the import from camera option.
Indeed I need to import videos in .mp4 and .mov format into FCP X. The import in itself is normal I can see my videos into the events/clips library and if I play them from the library I can hear the sound quite perfectly.
However, when I want to edit my videos and put it in the timeline, there is no audio. As a result I started to think that my videos could be the problem so I tried the option "import from camera" option using the Isight camera of my macbook pro but the same things happened. I could hear the sound from the events/clips library but not from the timeline (I can't see any audiowaves in the timeline).
I found a solution using quicktime and extracting the audio of the video in .m4a then importing the videos files and the audi files corresponding but it's a long process and a waste of time as FCP X should be able to import the audio of my video into the timeline directly. Especially if it can read it from events/clips library.
I hope I explained myself clearly and you could help me resolve my problem.
Cheers
Christophe
PS: I'm using FCP X version 10.0

Update to 10.0.5.
You have an incorrect setting when you edit. Try trashing your preferences. Post screen shots of your timeline and toolbar.

My apple Tv has audio problems when streaming from my NAS server.

My Apple TV has audio problems when streaming from my NAS server or computer and even internet. I can hear the click sound it makes when you click on the icons, but when the movie starts there is no audio. This even happens when using XBMC. I have HMDI directly to my TV suing Apple TV 2. I have tried resetting, turning off both TV and Apple TV, and changing the HDMI cable. It is driving me nuts.

XMBC requires a hack, we cannot help with hacked devices.

Midi/browser playback problem with Audigy 2 platinum (Cannot set Default Device for some reas

Currently I'm having problems playing back mid files in Mediaplayer and various other default programs. I can play midifiles in Winamp by setting it to the proper Directsound device. However in control panel/sound setup (MIDI music Playback), It only lists the MIDI Out Devices instead of the playback one and is defaulted on BLANK when I enter it. I have a feeling this is the main problem.
DX Diag plays back the midi fine. I have tried reinstalling the latest drivers and the drivers from the disc with no luck at all. Also the default language has been stuck on Japanese as well. I have no idea why it started doing this but it seems to also affect any sound playback in my web browsers since I don't even get sound from any Flash files or Google video.Message Edited by zoglog on 06-23-2006 :38 PMMessage Edited by zoglog on 06-23-2006 :38 PM

Ok, well I did a clean sweep and clean reinstall of the drivers that fixed my language problem. However I cannot get the proper "Midi music playback" Default Device. Whenever I change it to something it reverts it to a blank no matter how many times I change it or uncheck "Use only default devices"
It does the exact same thing for "Voice playback"
I'm not sure if this is related but I don't get any sound from any web-browser Shockwave flash files.
This is really starting to get fustrating. Any help input would be greatly appreciated. I think the worst part about this is I know the midi works, it just won't let me assign the device....
Oh yeah, also even if I set the "place volume icon in taskbar" option in the sound and devices properties it wll not show. Not sure if this is related...Message Edited by zoglog on 06-23-2006 :44 PM

I have an audio problem when ever I use my Firefox web browser that makes a sharp audible sound simiular to a video game gun shot sound effect when ever I go into a new web page?

I have an audio problem that when ever I use my Firefox web browser it makes a sharp audible sound similar to a video game gun shot sound effect when ever I go into a new web page? I change to a new site or page a page on a site, I get an audible gunshot ping trpe sound? It happens almost every time. Its very annoying and is driving me nuts???
Any body out there had this happen also or know how to diagnose and fix this type of problem? I would hate to have to delete my whole Firefox program and have to start over again. If that is the case I will probably just scrap it and go on to try Google Chrome instead. I already have GC partially set up. I really have liked Firefox up to this point. I know add ons can cause problems at times but I haven't added anything new lately and this just started happening?

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.
[https://support.mozilla.org/en-US/kb/Options%20window Options]

ALSA: Setting default device (Not card, but device)

This seems to be a riddle that nobody can solve;
- The system only has one card by the name of 'Intel'
- That card is the regular 6 3.5mm jack soundcard.
- I have a mic plugged into the red microphone plug
- I open up Audacity and go to preferences, there are two microphone plugs, 'hw:0,0' and 'hw:0,2'
- I have no idea where 0,0 is and it doesnt make any sound, I plugged the mic into every plug on the board and nothing records.
- i can set Audacity to use 0,2 and then it will record my voice just fine
When I open up xfce's mixer I see that there are two mic plugs:
Apparently "Front Mic" is the device that is hw:0,0 right now/
Now when I play Savage2 I don't have an option to choose the device, I can choose the soundcard but that doesn't help. How do I set the default Device so that the game uses hw:0,2 in push-to-talk?

from the alsa archwiki:
"Setting the default Microphone/Capture Device
Some applications (Pidgin, Adobe Flash) do not provide an option to change the capture device. It becomes an issue if your microphone is on a separate device (i.e. USB webcam or microphone) than your internal sound card. To change only the default capture device, leaving the default playback device as is, you can modify your ~/.asoundrc file to include the following:
pcm.usb
type hw
card U0x46d0x81d
pcm.!default
type asym
playback.pcm
type plug
slave.pcm "dmix"
capture.pcm
type plug
slave.pcm "usb"
Replace "U0x46d0x81d" with your capture device's card name in ALSA. You can use 'arecord -L' to list all the capture devices detected by ALSA."
EDIT: maybe i didn't read your post well enough.. im just guessing here but maybe you can replace card U0x46d0x81d with
device name_of_device..
maybe..
Last edited by test1000 (2010-10-24 17:06:36)

Audio Problem When Making Normal Call

I've run into a problem where, if I place or receive a call using my iPhone, the iPhone doesn't play or transmit the conversation audio. In fact, I don't even hear ringing. This changes if I change the call into Speaker mode; audio seems to work fine after I do that. I was having this problem last night and it continued into today, and I've reset it twice. I'd prefer to not have to restore it and put all of my music and stuff back on the phone. Any help would be greatly appreciated. Thanks!

I have noticed that from time to time the device loses track of what to use for output.
Since I use BlueTooth most of the time I have been able to bypass the problem with the depression of the button on the BlueTooth headset.
When I do not have the BlueTooth on, I normally have to put the iPhone up to my ear to hear the audio.
When possible you can go to Voicemail, depress the audio key and then depress the manner that you want to receive the audio.

Audio Problems when burning

I have tried making disc image, burning disc and the audio will pause for second several times in the play back. It does not do it when playing back in iDVD.
The slide show was started in iPhoto and sent to iDVD. I have started over several times and still same issue. Makes a bad impression and is really not useable for presentation.
I have 30 gigs free space, changed settings to Professional encoding and still same issue. I have no open apps, changed all energy settings and screen saver to never.
Any ideas, I am fresh out, never had this problem with previous version.
Frustrated

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

IMovie audio problems when burning in Toast 6

Hi,
i've tried to burn an imovie project in idvd 5 but i get 'the error #-1 was reported' like most people have been and i've tried loads of things suggested to fix it with no joy.
I then sent the imovie project to toast titanium 6 where it burned fine. However, when i watched it i noticed that although toast had picked up all the audio (both dv audio and aiff), it did not pick up all the volume adjustments during the movie. how annoying! for example: i have an aiff clip that fades into a movie clip with the sound gradually going down but Toast picks up the sound staying at the same level. this also happens with volume adjustments in a DV file.
Any suggestions why this happens / how i can fix it?
Cheers,
Andy

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

[SOLVED] Problems with setting default printer in Libreoffice

Everytime I print in Libreoffice it complains about me not having set the default printer. Where do I do that in Libreoffice or is it refferring to my setup in cups? Also in systemsettings under KDE4 when I try to manage my printer and I try to set it as default I get the following error:
Der opstod en fejl under CUPS-handlingen: "client-error-forbidden".
EDIT: Fixed by setting default under cups administration.
Last edited by fettouhi (2013-12-08 14:48:04)

mahen wrote:
bkadoctaj : this is actually exactly what I did as well. It works, although there is still a strange behaviour compared to under Ubuntu for instance :
- The printer wasn't detected, I had to add it from the CUPS web interface
- Libo complains about "no default printer" although I definitely set it as default in the aforementioned interface
(I use cups-usblp and splix-svn due to my specific hardware)
Hmm, weird... as far as I can tell LibO is using my CUPS-defined default printer as its default. Thanks for the feedback - you made me glad that I wasn't posting something irrelevant lol.
Possibly a stupid question but your user is a member of the lp group, right? I don't have anything set for "Allowed Users" in CUPS but you could also try adding your user there. Curious to hear of a solution if you find one.

Problem in setting default printer in smartform

i want to set the default printer from Program not from User Default device.
i am using below fields to set...still system taking printer from user defaults...
please tell me what more parameters we need to pass,....
OUTPUT_OPTIONS-TDNEWID = 'X'.
OUTPUT_OPTIONS-TDIMMED = 'X'.
OUTPUT_OPTIONS-tddest = 'AFR1'.
contraol_param-NO_DIALOG = 'X'.
contraol_param-PREVIEW = 'X'.

in the fm u need to make USER SETTING parameter as ' ' most probably it is set to 'X' right now.
кu03B1ятu03B9к

Audio problem when burning DVD

Hi, Hope that someone can help me, I have already make several DVD's,and those went fine, but the latest Imovie project is with spoken audio.
When I try to burn this with IDVD 5.0.1 everything went well till IDVD has come to the audio part, hereby it goes wrong. I didn't get a failure message but nothing happened further on.
Hope someone has a solution!
G5 Mac OS X (10.4.3) 2x1.8 ghz

Hello, prutgers,
You will need to be a bit more specific with your problem so we can help you.
What do you mean by 'it goes wrong'? What exactly happens?
You need to know that when your DVD is encoding audio, the process appears to be doing nothing. If you leave it alone for a while, it just may finish. Maybe you are not waiting long enough.
Especially if you don't get an error message. What are you doing? Did you force quit? Did the DVD burn and has an audio problem?
Give us more information!

Audio problems when exporting files from Premiere Pro CS5

I try to post in English.
I have audio problems in Premiere Pro CS5 when exporting a film.
I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
Thanks for answers
Frieder

Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

Audio Problems when setting default device

Similar Messages

Maybe you are looking for