Audio problems when swf is published

I searched the forum for this problem, but did not find a comparable issue. I apologize if this post is redudant!
I am adding audio voice-overs to my flash animations, which will be later added to a Captivate project and published in total. Since the audio will be processed in Captivate, I do not want any compression of my wav file. So I've inserted my wav file...and when I test the file from the library panel, it sounds just fine. When I publish the swf, it sounds like it has been run through the compressor of death! It sounds terrible. In my library panel I have set the the compression of the wav file to "raw", as that is the uncompressed setting. Also, I am using Flash CS4. I have rendered the wav file from both Audacity and Soundbooth with the same results.
Has anyone else experienced this problem? If so, have you found a solution?
Thanks!!!
Brad

Duh! I found the problem. Even though I had selected compression settings for the audio file in the library panel, the global settings in the "publish settings" were overriding the settings. Everything is cool now, and I'm back in my "happy place".
Thanks for indulging me!

Similar Messages

Audio problem when importing video files.

Hello everyone,
I just started using FCP X a few days ago for a university project and I seem to encounter an audio problem when importing videos in .mp4, .mov format or via the import from camera option.
Indeed I need to import videos in .mp4 and .mov format into FCP X. The import in itself is normal I can see my videos into the events/clips library and if I play them from the library I can hear the sound quite perfectly.
However, when I want to edit my videos and put it in the timeline, there is no audio. As a result I started to think that my videos could be the problem so I tried the option "import from camera" option using the Isight camera of my macbook pro but the same things happened. I could hear the sound from the events/clips library but not from the timeline (I can't see any audiowaves in the timeline).
I found a solution using quicktime and extracting the audio of the video in .m4a then importing the videos files and the audi files corresponding but it's a long process and a waste of time as FCP X should be able to import the audio of my video into the timeline directly. Especially if it can read it from events/clips library.
I hope I explained myself clearly and you could help me resolve my problem.
Cheers
Christophe
PS: I'm using FCP X version 10.0

Update to 10.0.5.
You have an incorrect setting when you edit. Try trashing your preferences. Post screen shots of your timeline and toolbar.

My apple Tv has audio problems when streaming from my NAS server.

My Apple TV has audio problems when streaming from my NAS server or computer and even internet. I can hear the click sound it makes when you click on the icons, but when the movie starts there is no audio. This even happens when using XBMC. I have HMDI directly to my TV suing Apple TV 2. I have tried resetting, turning off both TV and Apple TV, and changing the HDMI cable. It is driving me nuts.

XMBC requires a hack, we cannot help with hacked devices.

Audio Problems when burning

I have tried making disc image, burning disc and the audio will pause for second several times in the play back. It does not do it when playing back in iDVD.
The slide show was started in iPhoto and sent to iDVD. I have started over several times and still same issue. Makes a bad impression and is really not useable for presentation.
I have 30 gigs free space, changed settings to Professional encoding and still same issue. I have no open apps, changed all energy settings and screen saver to never.
Any ideas, I am fresh out, never had this problem with previous version.
Frustrated

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

IMovie audio problems when burning in Toast 6

Hi,
i've tried to burn an imovie project in idvd 5 but i get 'the error #-1 was reported' like most people have been and i've tried loads of things suggested to fix it with no joy.
I then sent the imovie project to toast titanium 6 where it burned fine. However, when i watched it i noticed that although toast had picked up all the audio (both dv audio and aiff), it did not pick up all the volume adjustments during the movie. how annoying! for example: i have an aiff clip that fades into a movie clip with the sound gradually going down but Toast picks up the sound staying at the same level. this also happens with volume adjustments in a DV file.
Any suggestions why this happens / how i can fix it?
Cheers,
Andy

Andy,
This question is really in the wrong place - this is the iDVD '08 forum and not the iDVD 5 forum.
From the description of your problem using Toast, it sounds like you didn't actually export a DV video movie out of iMovie.
Export a DV video movie out of iMovie (it will run 13 GB per hour) and play it back with the QuickTime Player to see if the audio settings you made are really there. If this movie plays OK, you can bring IT into iDVD or Toast for turning it into a DVD.
If the DV video movie you created STILL has audio problems in the QuickTime Player, ask you question about THAT issue in the correct iMovie forum.
F Shippey

I have an audio problem when ever I use my Firefox web browser that makes a sharp audible sound simiular to a video game gun shot sound effect when ever I go into a new web page?

I have an audio problem that when ever I use my Firefox web browser it makes a sharp audible sound similar to a video game gun shot sound effect when ever I go into a new web page? I change to a new site or page a page on a site, I get an audible gunshot ping trpe sound? It happens almost every time. Its very annoying and is driving me nuts???
Any body out there had this happen also or know how to diagnose and fix this type of problem? I would hate to have to delete my whole Firefox program and have to start over again. If that is the case I will probably just scrap it and go on to try Google Chrome instead. I already have GC partially set up. I really have liked Firefox up to this point. I know add ons can cause problems at times but I haven't added anything new lately and this just started happening?

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode].
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]
Safe mode disables the installed '''Extensions''', and themes ('''Appearance''') in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Hardware acceleration is also temporarily disabled - the manual setting is '''Tools''' > '''Options''' > '''Advanced''' > '''General''' > '''Use hardware acceleration when available'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Advanced%20panel?as=u Options > Advanced]. All these settings/add-ons can also be individually or collectively disabled/enabled/changed in Firefox normal mode to check if an extension, theme or hardware acceleration is causing issues.
[https://support.mozilla.org/en-US/kb/Options%20window Options]

Audio Problem When Making Normal Call

I've run into a problem where, if I place or receive a call using my iPhone, the iPhone doesn't play or transmit the conversation audio. In fact, I don't even hear ringing. This changes if I change the call into Speaker mode; audio seems to work fine after I do that. I was having this problem last night and it continued into today, and I've reset it twice. I'd prefer to not have to restore it and put all of my music and stuff back on the phone. Any help would be greatly appreciated. Thanks!

I have noticed that from time to time the device loses track of what to use for output.
Since I use BlueTooth most of the time I have been able to bypass the problem with the depression of the button on the BlueTooth headset.
When I do not have the BlueTooth on, I normally have to put the iPhone up to my ear to hear the audio.
When possible you can go to Voicemail, depress the audio key and then depress the manner that you want to receive the audio.

Audio problem when burning DVD

Hi, Hope that someone can help me, I have already make several DVD's,and those went fine, but the latest Imovie project is with spoken audio.
When I try to burn this with IDVD 5.0.1 everything went well till IDVD has come to the audio part, hereby it goes wrong. I didn't get a failure message but nothing happened further on.
Hope someone has a solution!
G5 Mac OS X (10.4.3) 2x1.8 ghz

Hello, prutgers,
You will need to be a bit more specific with your problem so we can help you.
What do you mean by 'it goes wrong'? What exactly happens?
You need to know that when your DVD is encoding audio, the process appears to be doing nothing. If you leave it alone for a while, it just may finish. Maybe you are not waiting long enough.
Especially if you don't get an error message. What are you doing? Did you force quit? Did the DVD burn and has an audio problem?
Give us more information!

Audio problems when exporting files from Premiere Pro CS5

I try to post in English.
I have audio problems in Premiere Pro CS5 when exporting a film.
I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
Thanks for answers
Frieder

Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

Audio problem when running Win XP Pro SP3

I have a problem when running Windows XP SP3 on my MacBook. Every minute or so, and this happens consistently, the music would be played in a slow-motion mode, and after a few seconds return to normal speed. I have exchanged for another MacBook, and I am having the exact same problem. I have all the drivers installed properly, and have tried both iTunes and WMP. This even happens when I am gaming or watching YouTube.
The problem does not exist when I'm running Mac OS X.
Any help would be greatly appreciated. Thanks.

After spending a few hours googling around I finally found the solution to the problem. At first I thought it was something wrong with my Windows XP Pro, but apparently people running Vista were having the same problem.
I installed Vista myself and indeed was having the same problem.
The problem apparently is a clash between the sound card and the WiFi card on the MacBook. If you turn off your WiFi, you would not get the occasional adio/video slowdown.
The solution was actually quite simple, force-install the 5.x Broadcom 802.11n driver, and voila, problem taken care of.
Message was edited by: docomo661

Satellite Pro A120 audio problem when played through amplifier

I've been experiencing some problems when attempting to playback music through an amplifier, using a lead from the headphone socket on my laptop connected to the amp's auxillary input: when the laptop is connected, the amp produces static, and a high-pitched hum. Weirdly, this only happens when the laptop is connected to the mains. I don't think it's a fault with my amp, as the laptop, when connected to the mains, also causes interference with the LCD screen I use with it. Is there anyway to resolve this problem? Could it be a fault with the laptop itself, or the power cable?

Hi there,
The possible reasons for that issue can be:
- your machine and the amp has differrent ground potentials and/or voltage is inductioned in a mass loop
- over the screening of the audiocable is flowing a compensation voltage betwenn the amp and the notebook
- a low DC-voltage were generated on the resistance of the screening which causes the buzzing
The point is that you have to ground or separate the currents of the amp and the notebook.
Its logical: your power outlet is causing a interference so if you connnect both to to it, you have the interference.
Check if some machines are connected to your power outlet which are needing heavily current (e.g. fan heater or what i know what) and disconnect them to see if the interference is going away.
If not, I suggest you to try that which was suggested in your last post.
Greets

Audio problems when publishing to YouTube with Adobe Captivate 5.5

I was using Audacity to record audio, then importing the audio into Adobe Captivate 5.5. One I recorded earlier, before my computer was changed, but published into YouTube after it was changed published fine. But now, after doing recordings with Audacity and within Captivate itself, on different computers and everything, I am getting no sound when publishing to YouTube. It sounds fine in Captivate, but I get zilch sound in YouTube. I have tried different computers to record and listen to the video, different microphones, different audio levels, but to no avail. What am I doing wrong?

Hi there
I'm a simpleton at heart.
Have you tried ensuring that the speaker icon isn't muted?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Loader images do not appear when .swf is published.

I have a series of images that I want to be able to swap out
on a weekly basis in my flash piece. I used the image loader to
call them from my webserver, and when I am in flash, editing my
.fla, they appear perfectly. But once I publish the flash piece, a
white box appears in their place, and the images never load.
It doesn't matter whether I publish the flash to the web and
place it in the same folder as the images, or just publish it and
view it from my harddrive... either way, the images do not show in
the .swf... they only show while editing in flash. I am calling
dynamic text from the same server, and it works perfectly. Any help
is appreciated.

Hmm... hard to tell what is going on Josh. Can you provide a
url to the
swf?
Dan Mode
*THE online Radio*
http://www.tornadostream.com
*Must Read*
http://www.smithmediafusion.com/blog
*Flash Helps*
http://www.smithmediafusion.com/blog/?cat=11
"Josh Rose" <[email protected]> wrote in
message
news:e9oqua$ad2$[email protected]..
>I have a series of images that I want to be able to swap
out on a weekly
>basis
> in my flash piece. I used the image loader to call them
from my webserver,
> and
> when I am in flash, editing my .fla, they appear
perfectly. But once I
> publish
> the flash piece, a white box appears in their place, and
the images never
> load.
>
> It doesn't matter whether I publish the flash to the web
and place it in
> the
> same folder as the images, or just publish it and view
it from my
> harddrive...
> either way, the images do not show in the .swf... they
only show while
> editing
> in flash. I am calling dynamic text from the same
server, and it works
> perfectly. Any help is appreciated.
>

Audio problems when moving between chapters

My movie consists of imported video from my camera. I have a two songs playing over the video - one at the beginning of the first chapter and one at the beginning of the last chapter. When I play the movie straight through, the audio works perfectly fine. When I skip between chapters the two with songs play correctly. However the chapters that have the original audio are distorted - the video seems to pause or stall out and the audio doesn't play for several seconds. Does anyone know what my problem might be and how to fix it?

SteveG, I don't believe it is an 1820m issue at all. Do you have a single or multi-core processor? This behavior did not occur on my old P4 3GHz system. I only started observing it when I built this quad core system about a month ago.
By the way, today I replaced my mobo with one of the same brand and model and the behavior still exists (to rule out a defective mobo.) I've also tried 3 different video cards (although they were all NVIDIA) and the problem remains no matter which card I use.
Durin,
As I was typing the first post, I verified that I was using the Emu 1820m ASIO driver in both Edit and Multitrack views. (As I was writing it, it crossed my mind that I might have it set to something else in one mode.) However, it is the same in both.
One thing I forgot to mention is that there is one more app that behaves similarly (Reaper). All other apps (Sonar, FL Studio, eXT, Ableton Live, Sound Forge, Wavosaur) do not show this behavior and are rock solid.
If you'd like to see my thread about this behavior in Reaper (and others who can reproduce it) see here: http://www.cockos.com/forum/showthread.php?t=19036
I believe Sonar, FL Studio, eXT, Ableton Live, Sound Forge, Wavosaur, etc.. are doing something properly when playing back audio and/or initializing plugins that Adobe Audition and Reaper are failing to do properly with certain hardware configurations.
-Clayton

Audio problems when exporting

Hi there.
I'm having trouble exporting my video file. The resulting .mp4 has audio that is screeching. See video below, password 'audio55'.
Private Video on Vimeo
The problem arose when I updated from Leopard to Yosemite on my imac. The audio was messed up upon export whether I used CS5 or CC. So I used Time Machine to jump back to a date before I upgraded to Yosemite and now I'm exporting from CS5 again, using OS X 10.6.8 (Leopard) and the same issue still happens, as shown in the video.
I have been using this footage (AVCHD) with the same sequence settings for years. There is one error that pops up before I open the project, that the Scratch disks are write protected or unavailable and that they need to be set to my documents folder, which I 'ok'.
Please help!
Thanks,
David

Hi there
I've seen others report that it's helpful to adjust the audio so that each slide doesn't begin playing audio until .2 or .3 seconds into the slide.
Perhaps try that and see how you fare.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Audio problems when swf is published

Similar Messages

Maybe you are looking for