Audio Problems with Air 2.0.2 in Linux
We're seeing an issue which appears to be a bug in the Air 2.0.2 runtime for Linux. When a video file plays [via VideoDisplay] the audio is heard but as soon as the video is finished, audio cuts out for the entire application. We ran strace() and noticed Air opens the audio connection at the start of playback and closes it at the end, but will not re-engage audio for any other reason while the application is running. This includes running different videos or even just playing sound effects.
Has anyone seen this behavior where when a video is complete, the audio stops all together for the application? We did not have this problem before Air or in Air 1.5, so I suspect this is a bug in the Air 2.0.2 runtime for Linux.
Hi,
I also tried playing 2 videos via VideoDisplay one after the other using the following code:
<mx:VideoDisplay
id="video1" source="/assets/videos/vid1.flv" autoPlay="true" width="400" height="400" x="50" y="20" complete="video2.play()"/><mx:VideoDisplay
id="video2" source="/assets/videos/t.mov" autoPlay="false" width="400" height="400" x="550" y="20"/>
For me, the audio plays fine for the both the videos on Ubuntu 9.10.
Could you please provide the following information:
1) The Linux distro you are on.
2) The sound mixer you are using and its version(ALSA/pulseaudio).
3) It would be really helpful if you could provide your application/part of source code where you are playing the videos.
Similar Messages
-
USB audio problems with 2013 iMac
I'm having a strange audio problem with USB microphones and headsets. The issue with my Logitech H650e is shown in this screencast I recorded. In the first part of the screencast, I am not speaking into the mic—yet you can see the levels fluctuating as if there is static playing (not in a natural pattern that you'd see when someone is speaking). In the next part of the video I demonstrate that selecting the built-in iMac mic for input, and then re-selecting the Logitech headset temporarily solves the problem. You can see the input start to fluctuate normally as it should when I am speaking. But at 0:31 in the screencast, you can see the input levels freeze and stop registering anything. I continued to speak until the end of the screencast, but no input was detected. For this screencast, I was on a Go To Webinar call, but the problem occurs regardless of whether I'm using Skype, Go To Webinar, GarageBand or any other software.
The problem with my Blue Yeti USB microphone is also different. In that case, the input does not freeze as it does with the Logitech headset. The levels appear as you would expect, and it seems to work. However, the person on the other end can hear static in the background, even though I don't hear it in my own headphones. I learned this because I just tried to do a Skype interview with the Blue Yeti, and the interviewer told me they could hear static. We closed Skype and called each other back twice, but the problem persisted. Then, suspecting the problem was related to what I described above with the Logitech, I unplugged the Yeti and then plugged it into my Macbook Air 2013 (also running Mavericks). Lo and behold the static completely disappeared.
My Griffin iMic and Audio Technica lavalier mic (attached to the iMic) behaves similarly to the Yeti, except in this case I can hear the static when I speak with my monitoring headphones. The input works but I get a lot of cracking and static in the background. This was confirmed by calling the Skype Test Call number and recording a message, which is then played back.
Here are the facts:
All 3 of my USB audio microphones/headsets do not work with my 2013 iMac running Mavericks
All 3 of these microphones/headsets worked fine with my 2008 Mac Pro running Mountain Lion
All 3 of these microphones/headsets work fine with my 2013 Macbook Air running Mavericks
In this other thread, several people are reporting similar issues with the iMac 2013 and Mavericks. At least two people did not have the issue when the iMac 2013 was running Mountain Lion. This of course suggests the issue is the combination of the iMac 2013 and Mavericks.Apple>About This Mac>More Info>Service
Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems. -
VGA problem with FiFA 2003 and Audio Problem with NHL2003
i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway...... -
I do not have video, audio only with air play on my apple tv using my ipadusing instant video
It needs to be in iTunes, with home sharing enabled on computer and Apple TV. When computer is on and running iTunes you will be able to access via the Computers icon on Apple TV
File also needs to be in the correct format
H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4 and .mov file formats
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4 and .mov file formats
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format -
Firewire audio problems with OS X 10.5.6
Hello,
I’m experiencing audio problems with Firewire 400 on my Macbook running Mac OSX 10.5.6.
I’ve got a 2.4Ghz IntelCore 2 Duo with 4 GB RAM and 59 GB available on the internal HD.
It’s hooked up to a brand new Mackie D.4 mixer with 2 Firewire outputs. The problems occur on both Firewire outputs.
I’ve installed automatically from the software update (which I will never do again) to 10.5.6. I never tried the D.4 with 10.5.5 so I can’t tell if the problems occur there also.
The main problem is that after a couple of minutes of recording the sound starts to break up and get really distorted. After a while the sound comes back again.
The second problem is that Soundtrack Pro or Audacity don’t get any audio input from the D.4, although audio input is clearly visible in System Preferences – Sound.
The only sound program that works with all 14 Firewire channels is Ableton, but also in Ableton the distortion occurs.
An example of the distortion can be checked here:
http://media.kaalslag.com/firewire-distortion-problem-mackieD4+Macbook.mp3
I’ve roamed several forums and sites to solve the problem and I tried these solutions:
I updated again to 10.5.6. with the full combo download from the Apple site. Restarted. Problem still there.
I shut Airport off, because lots of sites mentioned problems with Airport conflicting with audio/firewire. Didn’t work.
I did the work around with shutting the Macbook off, disconnecting the D.4, restarting the Macbook, opening Audio/Midi Setup, connecting the D.4 again, toggling the format frequencies a couple of times. Again, no use.
Right now I’m using my “old” Macbook again to record from vinyl. This one is still running on OSX 10.4.11. No problems so far.
I’ve had the distortion problems occuring before with an USB interface. Hoped that the Mackie Firewire would solve the problem, but it seems now that there’s a serious audio Firewire problem which is still not solved in OSX 10.5.
Any help, tips and/or a work around would be much appreciated. Thanks!You could try using another computer in Target Disk mode (as an "external HD"), or you can connect the firewire cable and disconnect all other network cables (turning off airport). Then on each computer go to the "Network" system preferences and select "Built-in Firewire" from the list of ports and choose "Manually" from the drop-down menu next to "Configure". Enter the following IP addresses and subnet masks, apply the changes.
_Computer 1_
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
_Computer 2_
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
After those ip addresses are entered and you've clicked "Apply", ensure that for both computers you have file sharing enabled (done in the "Sharing" system preferences), and then check the Finder sidebar to see if the computers can see each other (their names should appear under "Shared" in the sidebar--if not, try restarting).
If the computers dont appear (even after restarting), using the "Connect To" option that's available in the Finder's "Go" menu. In there, to connect to another computer enter it's IP address as follows:
afp://IP_ADDRESS
If you're on the computer with the ip address of 192.168.1.1, you would enter 192.168.1.2 as "IP_ADDRESS". The "afp" is the protocol (just like "http" for web), and stands for "Apple Filing Protocol"...Apple's file sharing protocol. -
Hy,
I have problems with AIR-BR1310.
When the bridge boot this is the sequence on LEDs indication :
Sequence 1: R-blinking green S-blinking green E-off I-red
Sequence 2: R-off , S-green, E -red, I –red
and the sequence continue.
I connected a laptop at console port on power injector but in hyperterminal I cannot see anything.
I changed the power injector and the symptoms was the same.
To function properly the correct sequence 2 for LEDs indication should be:
Sequence 2: R-off , S-green, E-green , I –red
What does it mean?
What i can do ?
It ' s possible to resolve this issue?
Thanks.Hi,
The below link will answer ur question..
http://www.cisco.com/en/US/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap22-trouble.html#wp1099822
lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra -
When sending voice messages using Cloudtalk, the recipient hears only garbage. I contacted Cloudtalk technical support, and it appears that the 3gp file sent by the phone is not recognized. This problem is known by them, and happens only on Droid/X.
Anyone else is experiencing audio problems with the droid/x?That doesn't sound like an audio issue with the X, it sounds like a compatibility issue between the X and the service.
-
Hello all, I'm having audio problems with my FiOS set top box. When I start to change channels I lose audio and can't get it back unless I turn the TV off/on or I change the HDMI source on my TV . Seems after changing a couple of channels the problem happens. I've tried the in home agent auto correct, and different HDMI cables. I have a Westinghouse TV and I'll try a firmware update for the TV and see if that fixes it. Any fix for this and the possibility that it might be the set top box ? I just got FiOS and all is going well besides this issue. Seems that the other STB that are model # 335 aren't having this problem.
Some TVs have had issues with the HDMI handshake and the Audio. You may be required to use the separate bulkier HD Component cables with separate audio cables. Or try it as a solution on that TV.
I have CHS 435 DVR on a Samsung, and 2 CHS 335s on different model Vizio TVs, all with HDMI, and no issues. Others have reported different issues. I did a search here with the following results. Perhaps this information will help.
http://forums.verizon.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3AFi... -
Audio Problems with some HD channels (HBO mostly)
I'm experiencing sporadic audio problems with a handful of HD channels. Most noticably on HBO.
When the audio is output through the television itself, it sounds OK... however if the audio is output through my home theater receiver and speakers, I can hear a lot of static and "crackling" on certain movies and shows.
The issue isn't the home theater setup, as I have several other components that use it (AppleTV, Bluray, Xbox, etc.) and the audio sounds perfect from them.
The only device that displays that poor audio is the FiOS Set Top Box and even then it's only on a few channels.
I thought maybe that the optical audio cable between the set top box and the receiver may have been bad, so I replaced that. Same problem even with the new cable.
The problem is either with the Set Top Box itself or the audio levels on the stream from the channel provider.
Has anyone experienced anything similar to this, and if so... did you resolve it somehow?
Any help you could provide would be most appreciated.
Thanks!Check the following.
Help & Settings > Settings > Entitlement Information
Here are possible entitlements mapped to channels.
101 - 104 : PSB HD
407 - 433 : Essential Extra / Unlimited Extra
446 - 453 : HD Extra
501 : Sky Sports 1
502 : Sky Sports 2
507 - 509 : BT Sport SD
510 - 512 : BT Sport HD
513 - 514 : Essential Extra / Unlimited Extra
530 - 540 : Sky Movies
555 - 563 : Kids Extra
You need 'HD Extra' for channels 446 - 453. I have the free 'BT Sport HD' but that does not cover entertainment HD channels. You need to subscribe to the HD Extra bolt-on for £3 for them. Have you ordered HD Extra (it only became available from last Sunday)? -
Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system
We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115 -
Problem with the renameTO method in the Linux environment
Hi
I got a problem with the renameTO method in the Linux environment. The file is not moving.
This method is returning false. the same code executed successfully in Windows environment.
Can anyone give some fix to this one or an alternate solution to move the files in both windows and Linux.
boolean success;
File root = new File(tempPath);
File f = new File(root, phyFileName);
File dest = new File(targetPath);
success = f.renameTo(new File(dest, actualFileName));actualFileName = 400.doc
dest = /home/jboss-4.0.3/axsscm_1.0/axsscmDocuments/xchange/fileup/fshare/PO/1786JITHENDRA wrote:
Thanks for the prompt replyNo problem.
>
Can u solve the below doubt.
Will renameTo method wont work in Linux? If so why?Did you not read what I said? I suspect you are trying to rename a file so that it actually has to be moved to a different volume (partition or hard disk) so it won't work. One would have the same problem on Windows trying to rename a file on the c: drive to a name on the d: drive.
>
>
Can u give a sample or good link to do the above work which works fine in all environments.?Just follow the pseudo code I gave. 15 minutes work. -
Audio problem with 2gen ipod touch
Recently I've been having issues with my second generation Ipod Touch and I'm hoping that someone will be able to help me. The problem is a bit strange, so please bear with me as I try to explain it.
As I said, I have a second generation 8GB Ipod Touch that hasn't been too problematic until now. Recently it has been having major audio issues. I was listening to it with my headphones one day when the audio cut out. I thought I had paused the track by accident, but according to the screen, the audio was still playing, however the volume bar had vanished as though no headphones were connected at all. I popped the headphones out and then in again; it worked for a few moments before the problem happened again. I had thought it was just a problem with my headphones until it happened again with a different set and then the audio jack for my car stereo. All the cords are fully pushed in, I checked that problem immediately. It will randomly happen where the audio will cut out and the volume bar will vanish, like it would with nothing connected to it.
Another issue that I noticed is with my external speakers. For whatever reason they are no longer working, just like the headphones, the volume bar is gone and will not return no matter if the music is playing/paused or if I attempt to adjust it with the buttons on the side.
I have never had a real issue with this Ipod and I'd love to know if there's an explanation or if I should just attempt to take it into the Apple Store and see what they can make of it.
Thanks in advance, feel free to ask any questions and I apologize if the explanation was rubbish.I've seen that kind of issue when there's a problem with the dock connector. It's somehow detecting something plugged into the bottom. You should try to make sure there's nothing stuck in or around the dock connector such as lint or some thing else.
Also make sure you backup and restore your ipod to make sure you take care of any software issues that may be causing this to occur.
Lastly if it still happens, you should definitely take it in for service. -
Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)
Hello
We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
Dennis
(Workstation: Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0) )
Mediainfo of the P2-Cards:
General
Complete name : \CONTENTS\VIDEO\0068T7.MXF
Format : MXF
Format profile : OP-Atom
Format settings : Closed / Complete
File size : 3.92 GiB
Duration : 2mn 28s
Overall bit rate : 227 Mbps
Encoded date : 2014-10-15 13:33:41.000
Writing application : Panasonic P2 2.0
Writing library : Panasonic P2 2.0
Video
ID : 2
Format : AVC
Format/Info : Advanced Video Codec
Format profile : High 4:2:[email protected]
Format settings, CABAC : No
Format settings, GOP : N=1
Format settings, wrapping mode : Clip
Codec ID : 0D01030102106002-0401020201323104
Duration : 2mn 28s
Bit rate : 227 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 50.000 fps
Standard : Component
Color space : YUV
Chroma subsampling : 4:2:2
Bit depth : 10 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 2.193
Stream size : 3.92 GiB (100%)
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
Mediainfo Audio-Datei P2-Card:
General
Complete name : \CONTENTS\AUDIO\0068T700.MXF
Format : MXF
Format profile : OP-Atom
Format settings : Closed / Complete
File size : 13.6 MiB
Duration : 2mn 28s
Overall bit rate mode : Constant
Overall bit rate : 770 Kbps
Encoded date : 2014-10-15 13:33:41.000
Writing application : Panasonic P2 2.0
Writing library : Panasonic P2 2.0
Audio
ID : 3
Format : PCM
Format settings, Endianness : Little
Format settings, wrapping mode : Clip (AES)
Codec ID : 0D01030102060400
Duration : 2mn 28s
Bit rate mode : Constant
Bit rate : 768 Kbps
Channel(s) : 1 channel
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 13.6 MiB (100%)Hi,
we have the same problem!
It is not possible to play audio with the AVC-Intra100 Codec fluently.
Can anybody help?
Thanks,
Anja -
FileStream problem with AIR deployment
I use FileStream to load local XML file. When I test the desktop application directly from Flex everything is ok but when I install it with AIR, the application work but the file is not loaded. Here is the code I use:
import flash.filesystem.*;
var applicationDirectoryPath:File = File.applicationDirectory;
var nativePathToApplicationDirectory:String = applicationDirectoryPath.nativePath.toString();
nativePathToApplicationDirectory +=
"/config_poste_temps.xml";
var file:File = new File(nativePathToApplicationDirectory);
var fs:FileStream = new FileStream();
fs.open(file, FileMode.READ);
var config:XML = XML(fs.readUTFBytes(fs.bytesAvailable));
fs.close();
plan.text = config.division;
RegardsI am having the same problem as simon_lucas although my config is slightly different:
FlashBuilder 4 with SDK 4.6, Current app is with SDK 2.5.
Trying to update with SDK 3.2, I double-checked per Horia Olaru that I do use the application updater swc:
<path-element>D:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0 - Air 3.2\frameworks\libs\air\applicationupdater.swc</path-element>
<path-element>D:\Program Files\Adobe\Adobe Flash Builder 4.6\sdks\4.6.0 - Air 3.2\frameworks\libs\air\applicationupdater_ui.swc</path-element>
But I still have the 16815 error.
If I change the update.xml to be <update xmlns="http://ns.adobe.com/air/framework/update/description/2.5">
instead of <update xmlns="http://ns.adobe.com/air/framework/update/description/3.2">, I am proposed to download the new app and then I get an error 16824.
Please HELP! -
I have a season pass to Dr Who and all 30+ other shows purchased on iTunes work great. Last night's episode (Hide) has a hissing sound so loud it drowns out all the audio in the show when i try to watch it on my Apple TV. I then downloaded the episode to my iMac and my iPad and no audio issues there. However when I tried playing it shared from my iMac to the Apple TV and the audio problem was there again. Same thing happened when I tried to AirPlay from my iPad to Apple TV.
I have two Apple TVs. One is latest model w latest upgrade, the other is generation before without latest upgrade. Same audio issue on both. I have tons of iTunes TV shows and movies and this is the only episode with an issue. Something is wrong with this file that causes it to screws up the audio on Apple TV.
Has anyone else seen this kind of audio issue specific to just one TV episode or movie? Anyone know support path for iTunes problems?If other episodes play Dolby Digital fine this could be a file encoding problem - they sometimes get it wrong.
I suggest you all contact Apple about the problem via itunes store support here:
https://expresslane.apple.com/
Maybe you are looking for
-
HT201089 Remove permission for app
i gave a family member permission to have an app via family share plan. I would like to remove that decision so they no longer have access to the app but i can not figure out how to do It. Ive tried hiding the app on his appleid and mine, but if eith
-
How do you stop HTML5 video from autoplaying?
I don't want video to play automatically. Flashblock achieves this for flash videos, but there doesn't seem to be a way to do the same thing for html5 video (on vine, for example). None of the about:config settings appear to have any effect, and html
-
Weblogic 10.3 & MySQL Connector
Hello everyone! I use Windows 7 Professional 64x and try to install MySQL connector for Weblogic server, copied mysql-connector-java-commercial-5.1.14-bin.jar to wlserver_10.3\server\lib directory and start my domain. I get an error "Failed to load M
-
I Was adding another image to my work on photoshop touch, when the program froze. I cannot seem to correct this problem. I am using iPad.
-
Setting Max CPU usage for individual apps.
Is there a way to set a maximum CPU usage (percentage) for individual applications so when they run they will never go above the limit?