Audio problems with embedded Flash

I have the Flash of a Captivate simulation embedded on one of
the slides in my Presenter file. When I publish it, the audio for
the Flash starts playing in the middle of the previous slide -
playing over the audio for that slide. When I click Pause, the
audio for the Presenter slide stops, but the Flash audio keeps
going even though I haven't gotten to the slide with the embedded
file yet. It always starts 4-5 seconds into the previous slide.
Does anyone have a clue why this is happening?
I've used embedded Flash files in Presenter several times
with no problems, and the settings in Presenter are all the same as
in the presentations that work correctly.
- In Presentation Settings, I have "controlled by
presentation playbar" deselected because there are click boxes in
the Captivate sim that users will click to advance.
- In Slide Properties, I have "advance by user" select for
both the embedded slide and the previous slide.
- I thought that there was some glitch in the Audio Editor,
so I added 5 seconds of silence at the end of the previous slide,
and added enough silence to the embedded slide to more than cover
the length of the embedded piece.
This is the first time I've tried to embed a Flash file since
I upgraded to Captivate 2. Could something have changed on the
Captivate side of things? It still doesn't make sense why the audio
would start playing before the Flash starts, but I'm grasping at
straws here.
Thanks!
Judi

A little additional information:
It isn't just the audio from the embedded Flash that runs
early - it's the actual Flash file. I don't know if this makes any
difference in figuring out what's going on, but thought I'd add
that bit of detail.
Also - I had found out that my Captivate project that I
created the Flash from had gotten corrupted and was hoping that
fixing that would fix this problem as well ... but no such luck...
Judi

Similar Messages

Full screen problem, with embedded flash player in a flash player

Hi,
I am having an issue with the flash video player embedded within a flash player movie. The issue is that when my main flash is in Full Screen mode and I try to open that screen where embedded movie player is, when it is opened the inner movie player covers the complete screen, on the other hands it should show that embedded player in normal condition with other background stuffs.
Can anyone guide me what step should I take to avoid this or if it is possible to do this kind of scenario in Full Screen mode or not?
Looking forward to your prompt help.
Best regards,
Irfan

likeeak wrote:
I want to know how to disable hardware acceleration by use ActionScript 2.0
I don't know if this is possible; perhaps you should ask in the ActionScript forum?

Problem with embedded flash file

My flash file plays properly , when previewed in any
of 3 browsers via Dreamweaver 8.0.2 , but never appears at all when
I bring up the site as an anonymous viewer . I note that if I try
and reload the whole site using a client ftp instead of the
in-built "put" feature in DW , I get a message that "unable to
complete ,because of problem with a file or files" ( I paraphrase)
but that ftp program has no way of identifying which files are the
problem- and there are 600 or so in the site ( site is
www.OrchidsAndMore.org.uk - if it might help to see - the flash
file should be in the middle of the first page.

well, you can 'label' some frames to link inside your flash to those as a 'page'..
But i've allready found it myself :-)
I just had to put 'anchors' in place of 'labels' and than put like: 'index.html#thepage'
super easy!
thanks anyways

Problem with Embedding Flash Files

So I'm trying to embed a video I made in flash. I took the file and out and put it into my sites folder and copied some code to place it as an object in my web page via an html snippet. The strange thing is that when I view the video at its URL: http://web.mac.com/jlamb33/docs/success07.swf it looks fine, but when I put it into a page like: http://web.mac.com/jlamb33/AKPsi/Success.html it gets really small and I lose the controller bar. Anyone know what's going on?

Well, the reason I created it in flash was because a lot of my friends couldn't view the video with quicktime, because they don't have it. Anyway, I tried your setup and I can't seem to get it working properly. I copied the anplayer.swf file into my sites folder and copied the code into a snippet but nothings coming up. One thing I noticed is that the source file in the code was changed from the .swf file to .flv&amp. I didn't realize that was a valid extension, but I could be wrong. Any ideas on what's going on? I republished that page with a new snippet under the working movie and as you can see...there's nothing there. http://web.mac.com/jlamb33/AKPsi/Success.html

Problem with embedding Flash Text/HTML Code

Hey all, im new to DW and just created a html page with a
black background and a picture. I also added a flash text called
"Enter Forum" by using "Insert>Media>Flash Text"
When i copy and paste the code that is generated in the
"Code" section/tab on to my server in the index/html and go to view
my site it is not there. I uploaded the .swf file to my server
also, i have played around with the coding a bit to see if i was
doing anythng wrong but nothing works. Below is the code DW renders
to me. I simply copy and paste this code that DW renders and paste
it in to my server's index.html (Main Page) file. I checked the emd
src and all thats correct.
HTML Code that DW generates me:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">

</style>
<script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
</head>
<body>
<p> </p>
<p align="center"> </p>
<p align="center"> </p>
<p align="center"><img src="
http://www.nohornetsfanjc.com/1376.gif"
alt="Jason Vorhees" width="400" height="400" vspace="0"
/></p>
<p align="center">nohornetsfanjc.com is temporarily
offline.</p>
<p align="center" class="style2">
<script type="text/javascript">
AC_FL_RunContent( 'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0','widt h','329','height','59','src','text1','quality','high','pluginspage','http://www.adobe.com/ shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','bgcolor','#000000','movie ','text1'
); //end AC code
</script><noscript><object
classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=5,0,0,0"
width="329" height="59">
<param name="movie" value="text1.swf" />
<param name="quality" value="high" />
<param name="bgcolor" value="#000000" />
<embed src="text1.swf" quality="high" pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash"
type="application/x-shockwave-flash" width="329" height="59"
bgcolor="#000000"></embed>
</object></noscript>
</p>
<p align="center" class="style4"> </p>
<p align="center" class="style5">All Rights Reserved.
Â© 2005</p>
<p align="center" class="style6"> </p>
<p align="center"> </p>
<p align="center"> </p>
</body>
</html>
As i stated this is exactly what i paste into my index.html
file on my server. Im using no subfolders. Is there something im
doing wrong? Im completely new to this, so any and all help will be
appreciated very much!
Thanks
Shane

Can you post the url to show us the page on your server? If
you copied
everything, it could be you have too many doc types, headers
and body tags
in your index.html page.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"videoeditor15" <[email protected]> wrote in
message
news:[email protected]...
> Hey all, im new to DW and just created a html page with
a black background
and
> a picture. I also added a flash text called "Enter
Forum" by using
> "Insert>Media>Flash Text"
>
> When i copy and paste the code that is generated in the
"Code"
section/tab on
> to my server in the index/html and go to view my site it
is not there. I
> uploaded the .swf file to my server also, i have played
around with the
coding
> a bit to see if i was doing anythng wrong but nothing
works. Below is the
code
> DW renders to me. I simply copy and paste this code that
DW renders and
paste
> it in to my server's index.html (Main Page) file. I
checked the emd src
and all
> thats correct.
>
> HTML Code that DW generates me:
>
> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN"
> "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
> <html xmlns="
http://www.w3.org/1999/xhtml">
> <head>
> <meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
> <title>Untitled Document</title>
> <style type="text/css">
> 
> </style>
> <script src="Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
> </head>
>
> <body>
> <p> </p>
> <p align="center"> </p>
> <p align="center"> </p>
> <p align="center"><img src="
http://www.nohornetsfanjc.com/1376.gif"
> alt="Jason Vorhees" width="400" height="400" vspace="0"
/></p>
> <p align="center">nohornetsfanjc.com is
temporarily offline.</p>
> <p align="center" class="style2">
> <script type="text/javascript">
> AC_FL_RunContent(
>
'codebase','
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.
cab#
>
version=5,0,0,0','width','329','height','59','src','text1','quality','high',
'plu
>
ginspage','
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Vers
ion=
> ShockwaveFlash','bgcolor','#000000','movie','text1' );
//end AC code
> </script><noscript><object
> classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
>
codebase="
http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.ca
b#ve
> rsion=5,0,0,0" width="329" height="59">
> <param name="movie" value="text1.swf" />
> <param name="quality" value="high" />
> <param name="bgcolor" value="#000000" />
> <embed src="text1.swf" quality="high"
>
pluginspage="
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Ve
rsio
> n=ShockwaveFlash" type="application/x-shockwave-flash"
width="329"
height="59"
> bgcolor="#000000"></embed>
> </object></noscript>
> </p>
> <p align="center"
class="style4"> </p>
> <p align="center" class="style5">All Rights
Reserved. ?? 2005</p>
> <p align="center"
class="style6"> </p>
> <p align="center"> </p>
> <p align="center"> </p>
> </body>
> </html>
>
>
>
> As i stated this is exactly what i paste into my
index.html file on my
server.
> Im using no subfolders. Is there something im doing
wrong? Im completely
new to
> this, so any and all help will be appreciated very much!
>
> Thanks
>
> Shane
>
>
>

Audio crazies with embedded captivate 4 product in captivate 4 project in LMS

I know I've seen some solutions and setting variables to eliminate this issue (one I've never had before thank goodness) I have LO's created in captivate that contain published .swf files also created in captivate 4. I have 6 embedded in one project, 4 in another. Uploaded to the learning management system all of the audio in the final project (34 slides, 14 minutes) starts as soon as the .html file is called in the LMS. Help...I just can't seem to search the right combination of words to locate solutions that I am absolutely sure I've seen before. I'd appreciate a bit of direction if someone can point me to the thread or the solution.. I'm getting rather anxious about hearing all these voices!!!!...Thanks much
Susanne

A little additional information:
It isn't just the audio from the embedded Flash that runs
early - it's the actual Flash file. I don't know if this makes any
difference in figuring out what's going on, but thought I'd add
that bit of detail.
Also - I had found out that my Captivate project that I
created the Flash from had gotten corrupted and was hoping that
fixing that would fix this problem as well ... but no such luck...
Judi

Problems with embedding swfs into Director 11.5

Hello everyone,
I am hoping someone can help me and please bear with me - I don't know a lot about director - I can do some Lingo and get around in the program to make things work.
Right now I am working on an interactive presentation where the user can click a button to view an animation. I am using Director 11.5 for my presentation and have made my animations in After Effects CS3 -- from there I converted my .mov files to .flv files using the Adobe Media Encoder CS4... then I took my .flv file into Flash and published it as a swf file.
The problem that I am having is that when I play the presentation (within Director and after publishing the .app/projector file) the swf files are playing - but there is all this glitchy-artifact stuff all over them. Does anyone know why this would be happening? When I play the swf files in the flash player they look great. Before, when I was using Flash MX and Director MX, I never had any problems with embedding my swf animation files - and they played great - without any artifact. Any and all help would be much appreciated as this project is due in the next few days and I would prefer to figure out a solution rather than uninstalling Flash CS4 and Director 11.5 - and going back to MX.
I toyed with the thought that my video card isn't good enough but I tested the .app file on another machine and the glitchy-artifacts were still there. I have attached a jpg showing the artifact that appears.
I am running Mac OS X 10.5.7
Dual 2 GHz G5 PowerPC
ATI Radeon X800 XT
Thank you!

Sorry... here is the image again and I think the problem might be my machine -- it is very old (~4+ years) and when I tested my .app on a newer intel mac here it worked fine... but maybe I am missing something -- it seems odd that I can see the swf fine in flash player but it is glitchy when played through director or the .app projector file

Problems with Adobe Flash Professional CC (CS6 too) to save animated .gif file or perfect .swf file

Hello,
I have a problem with Adobe Flash Professional CC and CS6 to save animated .gif file. Here is very simple work with logo. But I can't save a perfect file swf or gif and it's so bad news for me. Logo .swf file save with bugs. Bugs just see then file insert in freeshop page. Here is just example test page, it let you see logo bugs - http://tagraseshop.graphicsrim.eu . Here is real page, but it's not my, it's freeshop with old logo and I have corect it - http://www.tagras.lt
Animated .gif file absoluted not saved in Flash CC. Just gif picture. And why? My os Windows 8.1 . Indeed I try to save on Adobe Flash Professional CS6. It's not save too...
Gif "animated" - https://mega.co.nz/#!D8pEVaRR!Gjg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT LK4
Swf with bugs - https://mega.co.nz/#!jo5lSRyS!1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ
Fla - flash document - https://mega.co.nz/#!C94nCDSS!7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA
Perfect animation speed is here - http://e-shoptagras.graphicsrim.eu
Who can help to me?
Any ideas?
Thanks for your help in advance!

Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
I need help! Please!

VGA problem with FiFA 2003 and Audio Problem with NHL2003

i use onboard VGA
800 x600for both games
with no problem
but for Fifa 2003
the screen looks so dark...
all players look like a black people(all black color hair
and black face))
some audio problem with NHL 2003...

Have you tried the following?
Adjust monitor settings? i.e. contrast/brightness
Video settings within the game? Some have gamma or brightness settings.
Gamma correction in "Display Properties"?
for starters anyway......

Problem with installing Flash Player 10 RC

Hello
I have some problem with installing Flash Player 10 RC. When
I try to do it I have error:
"Error opening file: C:\WINDOWS\system
32\Macromed\Flash\NPSWF32.dll". Why ?
Regards

Does it have any solution ?

Firewire audio problems with OS X 10.5.6

Hello,
I’m experiencing audio problems with Firewire 400 on my Macbook running Mac OSX 10.5.6.
I’ve got a 2.4Ghz IntelCore 2 Duo with 4 GB RAM and 59 GB available on the internal HD.
It’s hooked up to a brand new Mackie D.4 mixer with 2 Firewire outputs. The problems occur on both Firewire outputs.
I’ve installed automatically from the software update (which I will never do again) to 10.5.6. I never tried the D.4 with 10.5.5 so I can’t tell if the problems occur there also.
The main problem is that after a couple of minutes of recording the sound starts to break up and get really distorted. After a while the sound comes back again.
The second problem is that Soundtrack Pro or Audacity don’t get any audio input from the D.4, although audio input is clearly visible in System Preferences – Sound.
The only sound program that works with all 14 Firewire channels is Ableton, but also in Ableton the distortion occurs.
An example of the distortion can be checked here:
http://media.kaalslag.com/firewire-distortion-problem-mackieD4+Macbook.mp3
I’ve roamed several forums and sites to solve the problem and I tried these solutions:
I updated again to 10.5.6. with the full combo download from the Apple site. Restarted. Problem still there.
I shut Airport off, because lots of sites mentioned problems with Airport conflicting with audio/firewire. Didn’t work.
I did the work around with shutting the Macbook off, disconnecting the D.4, restarting the Macbook, opening Audio/Midi Setup, connecting the D.4 again, toggling the format frequencies a couple of times. Again, no use.
Right now I’m using my “old” Macbook again to record from vinyl. This one is still running on OSX 10.4.11. No problems so far.
I’ve had the distortion problems occuring before with an USB interface. Hoped that the Mackie Firewire would solve the problem, but it seems now that there’s a serious audio Firewire problem which is still not solved in OSX 10.5.
Any help, tips and/or a work around would be much appreciated. Thanks!

You could try using another computer in Target Disk mode (as an "external HD"), or you can connect the firewire cable and disconnect all other network cables (turning off airport). Then on each computer go to the "Network" system preferences and select "Built-in Firewire" from the list of ports and choose "Manually" from the drop-down menu next to "Configure". Enter the following IP addresses and subnet masks, apply the changes.
_Computer 1_
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
_Computer 2_
IP Address: 192.168.1.2
Subnet Mask: 255.255.255.0
After those ip addresses are entered and you've clicked "Apply", ensure that for both computers you have file sharing enabled (done in the "Sharing" system preferences), and then check the Finder sidebar to see if the computers can see each other (their names should appear under "Shared" in the sidebar--if not, try restarting).
If the computers dont appear (even after restarting), using the "Connect To" option that's available in the Finder's "Go" menu. In there, to connect to another computer enter it's IP address as follows:
afp://IP_ADDRESS
If you're on the computer with the ip address of 192.168.1.1, you would enter 192.168.1.2 as "IP_ADDRESS". The "afp" is the protocol (just like "http" for web), and stands for "Apple Filing Protocol"...Apple's file sharing protocol.

Have serious problem with my flash player

Hello,
i will start with my computer detail and program detail:
Os: Windows 7 64bit
Internet Explorer: ver. 8.0.7600.16385
Firefox: ver. 3.6.6 (Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6)
Chrome: ver. 8.0.552.224
Flash player ver. 10,1,103,20
When i installed the windows 7 (date: 03.2010) and the other browsers i had used good with flash player and all working good, but after couple months i had problem with IE8 and with Firefox, The Problem is: couple sites i have streaming problem when i trying watch some clip or video (youtube working good) and i have problem with the flash player itself that I can not click on the buttons of Flash Player itself in a number of sites built on Flash, example: facebook - zynga poker aplication. BUT at Chrome browser is worked great with the streaming and with the clicking buttons... so i start using with the Chrome browser... But 3 weeks ago, My Chrome browser start do the same problem like the IE8 and firefox!!!
i tried many things: i Uninstall plash player and install again - nothing!!
i uninstall flash player and install flash player 9 and still - nothing!!
i tought its problem at OS system so install (upgrade) the windows 7 and still - nothing!!
someone can help me with that? I give up and i didnt Enjoy with Flash player like that
Regards,
Igal Meltser

=O====== M/10.1.53.38 2010-11-22+20-17-42.303 ========
0000 [I] 00000010 "C:\Users\jef\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\J82HM11E\flashplayer10_1_rc4_activex_050510[1].exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
0004 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0005 [I] 00000013 C:\Windows\system32\Macromed\Flash\Flash10h.ocx
0006 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe
0007 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll
=X====== M/10.1.53.38 2010-11-22+20-17-49.120 ========
=O====== M/10.1.53.38 2010-11-22+20-22-28.472 ========
0000 [I] 00000010 "C:\Users\jef\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\3HEUMFML\flashplayer10_1_rc4_activex_050510[1].exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0002 [I] 00000013 C:\Windows\system32\Macromed\Flash\Flash10h.ocx
0003 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe
0004 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll
=X====== M/10.1.53.38 2010-11-22+20-22-36.506 ========
=O====== M/10.1.102.64 2010-12-20+02-07-39.616 ========
0000 [I] 00000010 "C:\Users\jef\AppData\Local\Temp\6F56.dir\InstallFlashPlayer.exe" -iv 0
0001 [W] 00001015 C:\Windows\system32\Macromed\Flash\Flash10h.ocx 5
0002 [I] 00000018
0003 [W] 00001015 C:\Windows\system32\Macromed\Flash\Flash10h.ocx 5
0004 [W] 00001015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll 5
0005 [W] 00001015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe 5
0006 [I] 00000013 C:\Windows\system32\Macromed\Flash\Flash10l.ocx
0007 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil10l_ActiveX.exe
0008 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil10l_ActiveX.dll
=X====== M/10.1.102.64 2010-12-20+02-07-49.288 ========

Problem with Adobe Flash Player into Opera Browser

Dear Friends,
I need your help with my 2 different problems that I am suffring with Adobe Flash Player.
I am having a serious problem with Adobe Flash Player.
I can see via my PC`s "Controlpanel" that I have Adobe Flash Player 11. But I am missing there Adobe Flash Player 11 ACtiveX.
How and where I can find it and then install it?
Lastly, I am using Opera Browser.
There if I go to YouTube to watch any video. When i click to any video then, green background. I can hear voice but soon after whole Opera is freeze.
Soon after video start then its background become green and after few seconds whole Opera browser freez. So I have to restart Opera again.
Thanks.

Hi,
Download and install ActiveX if you use Internet Explorer.
You need to install plug-in if you use Firefox, Opera, or Safari.
The following link has step-by-step information: http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_heading_5
Also, after installing ActiveX, ensure that you disable ActiveX Filtering in Internet Explorer. See the following link for details: http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac tiveX_Filtering__if_you_are_using_Internet_Explorer_9_
Thanks,
Sunil

Problem with Adobe Flash Player website warning keeps appearing? -Solution is simple: uninstall it!

Problem with Adobe Flash Player website warning keeps appearing? -Solution is simple: uninstall Adobe Flash Player! (-Who needs it anyway?)

So, you didn't need help with anything, you just wanted to rant?

I have a problem with adobe flash player

I have a problem with adobe flash player.
It is install but not running

Try a fresh install of Flash after completely uninstalling it using the application Adobe Flash Player Install Manager, in the Utilities folder. Then re-download and install from ww.adobe.com
If you are still having problems you could try installing Google Chrome as it has its own version of Flash built-in and doesn't require the separate installation of Flash.

Audio problems with embedded Flash

Similar Messages

Maybe you are looking for