Audio problems with SBLive! 5.1 and Windows XP Pro,

I just reinstalled Windows XP Pro from a slipstreamed CD with SP2 on it. (That means I can't just remove SP2 without reinstalling Windows.) Now, when I play a game the audio skips and stutters for the first 5-0 min of gameplay. The skipping and stuttering goes away eventually, but its REALLY annoying. This is the only hardware problem I've had with SP2, and I would like to know if there is a patch in the planning to fix all the SP2 Sound Blaster problems, or do we all have to find our own work around for these things.
If anyone has a solution for this please let me know. I've already installed the UniDriver thing, and it still acts up. I've tried removing and reinstalling everything, cleaning out my registry, and rebooting. Defragging my HD did not work either. Nothing seems to work.
CPU= AMD Athlon XP 2600+
RAM=704Mb
Video=GeForce 4 MX440 AGP 28DDR
Please help soon.

I think I may have solved my problem. I recently installed Full Spectrum Warrior. I installed it to a different dri've than all of my other games. Lo and behold, no audio problems. After some further investigation, I believe that the audio problem lies in an old hard disk dri've that is in the beginning stages of failure. After I actually thought about it, my load times from this hard disk have been taking forever, but Full Spectrum Warrior loads very quickly. The dri've is going to die! But I guess it's ok, the dri've is almost 0 years old, and this is the 3rd computer its been in.
Thanks for your help,
Josh

Similar Messages

Problems with Nvidia 320.49 and Windows 8.1

I am having problems with my HP Envy with windows 8.1... Nvidia driver keeps crashing.
Took the unit to Best Buy and we determined it was with the 320.49 driver - we are
able to reinstall it, and it will usually last for a few hours before it fails again. When
it fails, the resolution reverts to 1024 x XX... not the 1920 x 1260 when it works
right... very frustrating, but I need to know if the card needs replacement, or if there
is a fix from Nvidia... Contacted Nvidia and did not get anywhere with them.... can anyone
help??

Thank you for the additional information.
If it is an HP OEM video card, this is the reason that it is not working with the retail nVidia driver. HP has their motherboards and video cards made to their specs. Only the drivers developed by them will work with their cards.
Here are the drivers available for Win 8.1 on the Software & driver download page.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Problems with photoshop elements 10 and windows 8

I bought photoshop elements 10 for my wife last year for Christmas. She decided not to install it on our old computer because we knew that we were planning to replace the computer this year. We finally got around to replacing it and the new computer came with Windows 8. She installed her photoshop on it and she is having problems with it. I'm wondering if there is a compatability problem with the windows 8? Is there an update for the pse 10 that will make it work with windows 8?

PSE10 is said to be compactable with windows8. What kind of problem are you facing? Did you try launching after resetting preferences? to know more about reseting preferences, check http://helpx.adobe.com/photoshop-elements/using/undo-redo-cancel-actions.html#restore_defa ult_preferences

Problems with Nvidia GeForce 210 and windows 8.1

Hi all, I have Windows 8.1 Pro update 1 64bit installed, two weeks ago I started giving problems graphics card NVidia (even has me
given several blue screen).
I tried to update the drivers for the card but I got the same problem. It was working properly with generic
drivers, and if I went to Computer Administrator me a yellow triangle appeared
on my graphics card and the properties told me the following:
Windows has stopped this device because it has reported problems.
(Code 43 )
My machine is as follows:
Mainboard : Asus P5K SE
Chipset: Intel P31/P35
Processor : Intel Core 2 Quad Q6600 @ 2400MHz
Physical Memory : 3072MB (3 x 1024 DDR2- SDRAM)
Video Card : NVIDIA GeForce 8500 GT
Hard Disk : Seagate ST3320620AS ATA Device (320GB )
Monitor Type: LG Electronics L1919S
I just formatted
the computer from scratch, and
I still had the same problem with the graphics card,
so I imagined it would be a hardware problem
and bought NVIDIA GeForce 210.
In the end I
upgraded to Windows 8.1 update 1 with
the latest drivers for the GeForce 210,
and after 6 days running everything correctly, a few days ago
returned to give me problems,
the screen sometimes freezes and will not
let me do anything and after a while
giving me a blue screen and reboots
me, I suspect that the graphics drivers
are giving me problems, and I had to
disable the graphics card and work with
generic drivers from Microsoft, and even then I
was restarted once.
I installed Driver Booster and all the drivers are updated.
Could
anyone analyze
dump files dmp ? Download here
I got another dmp:
C:\Windows\MEMORY.DMP but it is too heavy.
Thanks

yes, I check the dump files
this cause by graphic card, on which graphic card you reformat your PC and update
.NET framework maybe cause this driver corrupted
my suggestion is try using internal graphic card, just for testing
Just in case you don't believe me, please check this dump file
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 116, {ffffe000d84c4010, fffff800b540be2c, ffffffffc000009a, 4}
Unable to load image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9bbe2c )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
VIDEO_TDR_FAILURE (116)
Attempt to reset the display driver and recover from timeout failed.
Arguments:
Arg1: ffffe000d84c4010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
Arg2: fffff800b540be2c, The pointer into responsible device driver module (e.g. owner tag).
Arg3: ffffffffc000009a, Optional error code (NTSTATUS) of the last failed operation.
Arg4: 0000000000000004, Optional internal context dependent data.
Debugging Details:
FAULTING_IP:
nvlddmkm+9bbe2c
fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
DEFAULT_BUCKET_ID: GRAPHICS_DRIVER_TDR_FAULT
CUSTOMER_CRASH_COUNT: 1
BUGCHECK_STR: 0x116
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
ffffd000`8adadbb8 fffff800`b457bfac : 00000000`00000116 ffffe000`d84c4010 fffff800`b540be2c ffffffff`c000009a : nt!KeBugCheckEx
ffffd000`8adadbc0 fffff800`b457008d : fffff800`b540be2c ffffe000`d760b7f0 ffffe000`d84c4010 00000000`00000001 : dxgkrnl!TdrBugcheckOnTimeout+0xec
ffffd000`8adadc00 fffff800`b4570582 : ffffe000`d760f540 ffffd000`8adadc60 00000000`00000002 00000000`00000001 : dxgkrnl!ADAPTER_RENDER::Reset+0x1f5
ffffd000`8adadc30 fffff800`b457b919 : ffffd000`8ada01b0 00000000`00000000 ffffe000`d5ff91a0 ffffe000`d742b000 : dxgkrnl!DXGADAPTER::Reset+0x416
ffffd000`8adadca0 fffff800`b446cfde : fffff800`b4453c90 ffffe000`d742b000 fffff802`84c1c000 00000000`00000000 : dxgkrnl!TdrResetFromTimeout+0x15
ffffd000`8adadcd0 fffff800`b4453d1d : ffffe000`d742b000 00000000`00000080 ffffe000`d50b4500 ffffe000`00000000 : dxgmms1!VidSchiRecoverFromTDR+0x1a
ffffd000`8adadd00 fffff802`84ceb794 : fffff802`84f69a00 ffffe000`d50b4500 ffffd000`8adaddd0 fffff802`84d7337d : dxgmms1!VidSchiWorkerThread+0x8d
ffffd000`8adadd40 fffff802`84d765c6 : fffff802`84f02180 ffffe000`d50b4500 fffff802`84f69a00 00000000`00000000 : nt!PspSystemThreadStartup+0x58
ffffd000`8adadda0 00000000`00000000 : ffffd000`8adae000 ffffd000`8ada8000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: .bugcheck ; kb
FOLLOWUP_IP:
nvlddmkm+9bbe2c
fffff800`b540be2c 803db68aeeff00 cmp byte ptr [nvlddmkm+0x8a48e9 (fffff800`b52f48e9)],0
SYMBOL_NAME: nvlddmkm+9bbe2c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nvlddmkm
IMAGE_NAME: nvlddmkm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 5315b408
FAILURE_BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x116_image_nvlddmkm.sys
FAILURE_ID_HASH: {c89bfe8c-ed39-f658-ef27-f2898997fdbd}
Followup: MachineOwner
1: kd> lmvm nvlddmkm
start end module name
fffff800`b4a50000 fffff800`b56a8000 nvlddmkm T (no symbols)
Loaded symbol image file: nvlddmkm.sys
Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
Image name: nvlddmkm.sys
Timestamp: Tue Mar 04 19:07:52 2014 (5315B408)
CheckSum: 00C20523
ImageSize: 00C58000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

Problem with Clean Access Agent and Windows Updater

I have a problem with a laptop when using Cisco Clean Access Agent. The agent keeps directing the laptop to get updates from the Windows Update site, but when I have connected the laptop via cable, windows updates tells me there are no updates either essential or optional. The laptop is a Sony VIVO VGN-FJ270 running XP Home Edition SP2 and the Clean Access Agent is version 4.0.2.1
Any help is appreciated!!

Verify the allowed hosts in CCA agent.
Try these link:
http://www.cisco.com/en/US/products/ps6128/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps6128/products_qanda_item09186a00803b7a81.shtml

Pairing problem with Docs to Go and Windows 7

First, I'm not sure this is the correct forum. I've setup a new Windows 7 laptop and installed Docuemnts to Go (latest version downloaded, no updates needed). An was able to pair with both my iPhone and my iPad. iTunes syncs fine (but that's using a USB cable). I entered folders and files for Docs to Go to sync (the same ones as on my old laptop running Windows XP). Then Docs to Go desktop couldn't find the iPhone and I needed to pair again. I have reinstalled the desktop application, double checked Bonjour, both laptop and iPhone are on the same WiFi. But, I can't pair the two devices to sync my folders and files. Dataviz hasn't been any help - followed all their instructions, e-mailed Tech Support and got a reply that said to do exactly what I told them I did!
Anyone have this problem? Anyone have a solution?
It seems to be a problem with one or the other (desktop application or iPhone app) not communicating via WiFi properly. I'm assuming that that's a Bonjour issue.
nlc

Try disabling your security system's firewall (McAffee, Norton or the like). You can also try this: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Problems with IS-H*Med and "Windows Vista"

Hi all:
I'm having problems with automatic installation of IS-H*Med using a computer with Windows Vista. It doesn't start. I must to install it manually, and when the user request the OCX, it hangs up.
Any idea?
Thanks in advance and regards,
Alejandro Gómez.
P.D.: Excuse my bad English.

Hola Alejandro,
could you please elaborate on your problem a little bit in detail?
I suppose, you don't mean the SAP system itself, since as far as I know, it (the application server side) is not supporting Windows Vista at all.
According to this <a href="https://service.sap.com/sap/support/notes/66971">SAP note 66971</a> only SAPGUI 7.10 supports Windows Vista. Do you use this version of SAPGUI?
What does not start? SAPGUI? The planning grid?(Which is the only i.s.h.med specific OCX as far as I know).
Did you open a customer support message for this?
kind regards,
anton wenzelhuemer

V570 problem with Intel onboard driver on Windows 7 Pro 64 bit

Hello Everyone,
I recently installed Windows 7 Pro 64 bit on my Lenovo v570. I downloaded the drivers from the support page and I have a strange problem with the onboard graphics driver "Intel Onboard Graphics Driver for Microsoft Windows 7 (64-bit) - Lenovo B470, B570, V370, V470, V570" in the drivers section.
Installation seems fine, but after restart, the system fails to boot and goes into boot recovery mode, where I get a message saying that booting failed due to a bad driver and the only actual option I have to boot up is to go back to a previous restore point. I tried installing the Nvidia driver for Windows 7, but it says that I need to install an Intel driver first, which is the one that gives me the blue screen when booting. I have also tried installing both drivers without a restart between both installations, but that didn't help.
I am wondering if anyone in the community has seen something similar. Any advice, information or assistance will be highly appreciated. Thank you very much in advance for your time.
Best regards,
Moe.
Solved!
Go to Solution.

Welcome to the Lenovo Community !
Check out the link I have posted below for video driver installation problems on your model. The suggestions offered have worked for others.
http://forums.lenovo.com/t5/Lenovo-C-E-K-M-N-and-V-Series/V570-video-drivers-don-t-work-with-Windows...
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Problem with new firefox tabs and window focus

Here's a problem that I've had for ages - sometimes it annoys me, other times I can live with it. Right now it's really p***ing me off. :x
I have selected 'a new tab in the most recent window' under FF's Preferences->Tabs->Open links from other applications in:, so as an example, if I click on a URL in a mail in Thunderbird, Firefox opens it in a new tab. However, window focus stays on Thunderbird. I run both of them full screen, so although I'm looking at the web page in Firefox, anything I do on the keyboards affects Thunderbird. It affects URLs opened from other apps too e.g. if I open a terminal and do
firefox www.archlinux.org
focus stays on the terminal window. The only exception is when firefox is not already running - in that case, firefox launches with focus.
DE is xfce4, and the system is completely up to date.
I've done some googling, and AFAICS, nobody else seems to have this problem. Any ideas, anyone?
TIA.

Thanks MAC!EK - definitely a useful add-on, but it still doesn't solve my problem. In Tab Mix Plus Options, I have the following selected:
Links -> Open links from other applications in: New tab
Events-> Tab Focus -> Focus/Select tabs that open from: <all>
However, the behaviour is as before i.e. I click a URL in Thunderbird, it opens in a new tab in Firefox, but window focus stays on Thunderbird. Within Firefox, the newly-opened tab is selected or focussed, but Firefox itself is not.
Anyway, thanks again. I think I need to keep looking.

Problem with touchpad using firefox and windows 8.1. I don't have a problem with explorer 11.

new HP computer with windows 8.1. Firefox does not work well with the touch pad when scrolling . very slow and erratic, most noticeable when using facebook. I don't have this problem when using Internet Explorer 11.
Old computer had windows 7 and my preference was to use firefox over explore. At this time i'm being forced to use explore and firefox is to aggravating to use.

Currently Firefox is not available for metro devices.
However, make sure that the touch features are enabled by searching for "touch" in the about:config entries.
In order to change your Firefox Configuration please do the following steps :
# In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
# Click '''I'll be careful, I promise!''' to continue to the about:config page.

Problems with iTunes Cover Flow and Windows Vista

I just recently upgraded my computer to Windows Vista Home Premium (32-Bit). I preformed a clean install and every program I have tried so far (Battlefield 2, Battlefield 2142, Age of Empires 3, Halo: Combat Evolved, Microsoft Office XP, etc.) have worked fine, however, iTunes is having some problems (7.4.1.2). First, cover flow does not work right. It can get it to run, but it is super slow. It ran very smoothly on Windows XP, now on Vista it skips every over album cover and is very choppy. It seems like it is running at 3 FPS. Also, none of my videos will play in Quictime or iTunes. The strange thing is I can play the same videos in VLC and GOM and they work great. I just went to nVidia's web site and installed the latest drivers and my games runs fine so I don't think it is a driver issue but I am not sure.
Any advice I would appreciate,
Thanks
Message was edited by: Full-Throttle

Full-Throttle wrote:
I just recently upgraded my computer to Windows Vista Home Premium (32-Bit). I preformed a clean install and every program I have tried so far (Battlefield 2, Battlefield 2142, Age of Empires 3, Halo: Combat Evolved, Microsoft Office XP, etc.) have worked fine, however, iTunes is having some problems (7.4.1.2). First, cover flow does not work right. It can get it to run, but it is super slow. It ran very smoothly on Windows XP, now on Vista it skips every over album cover and is very choppy. It seems like it is running at 3 FPS. Also, none of my videos will play in Quictime or iTunes. The strange thing is I can play the same videos in VLC and GOM and they work great. I just went to nVidia's web site and installed the latest drivers and my games runs fine so I don't think it is a driver issue but I am not sure.
Well - you're not alone. I've got a very high-end video card (nVidia 8600 GTS OC), and am running Windows Vista Ultimate. Every aspect of 3D acceleration works great with my machine (World of Warcraft, Battlefield 2142, Half Life 2, Counterstrike: Source, etc.), except iTunes/Quicktime. I pretty much have the same issues: videos (all - .mov, .mp4) play absolutely horribly in both applications, and cover flow is slow/choppy at best. I think it's an iTunes/Vista issue that Apple has yet to touch, so I'm just waiting for January (I'll buy my first mac, a macbook pro, then), because for the first time in my life, I'll have an installation of iTunes that functions properly. I love iTunes. Just not on Windows machines. It leaves something to be desired.
Message was edited by: william.garrison

Audio Problems with Prores444 file (preview and render)

I'm having this problem, I have a number of prores4444 files with audio that I exported from redCine. The audio plays fine in quicktime, but when I import into AE something goes wrong. I can see what apears to be the correct waveform in the Audio chanel, but when I atempt to preview, or I render with audio, everything just sounds like static or white noise. Is ths an AE bug?

You need to be more specific. What version of AE? What version of QT? On which tracks is the audio? Sample and bit rates?
Mylenium

Problems with the software update and windows vi

Hello,
I have been looking all over this forum and couldn't find an answer to my question, so I decided to post it myself.
Recently I bought a laptop with windows vista installed on it, and my creative zen vision M 30gb software stopped working. After ignoring this problem for a month, I thought creative might have already came up with a solution. I downloaded this new software package; Creative ZENcast Organizer .04.06 Suite. When I tried to install the software, I received an error, stating that my windows media player wasn't up to date. After double checking my windows media player updates, I concluded that my windows media player was up to date. Still I can't install this new software. Looks like creative is living up to its BAD reputation over and over again. Any help?
kindest regards,
Carlos Vangilbergen.

Out of boredom I decided to try to use the usb cable that i use for my digital camera instead of the bundled one?The Vision M burst into life!?

Problems with 802.1x,ACS and Windows Server 2000

Hi,
My components: ACS 3.3 running on a Server with Windows 2000 Server SP4 , 2950 Catalyst (AAA-Client) ,
Laptop with Windows XP SP2 (802.1x Client)
I have everything configured according to Cisco documentation, but I am getting one error in the ACS's log.( Failed Attempts active.csv)
Authen-Failure-Code : EAP-TLS or PEAP authentication failed during SSL handshake
I have a valide certificate on my Radius(ACS) server and about machine authentication I have a valide certificate on my laptop. (I have installed this certificate before i started to login at the 802.1x port of the switch)
Does anyone have any idea what the problem is?
Here is the Config of the Catalyst 2950 if that will help:
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname ACS-Client1
aaa new-model
aaa authentication dot1x default group radius
enable secret xxxx
username xxxx privilege xxx password xxx
ip subnet-zero
ip ssh time-out 120
ip ssh authentication-retries 3
spanning-tree mode pvst
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
dot1x system-auth-control
interface FastEthernet0/13
switchport mode access
dot1x port-control auto
dot1x timeout quiet-period 3
dot1x timeout reauth-period 1
dot1x reauthentication
interface GigabitEthernet0/2
interface Vlan1
ip address 10.10.3.253 255.255.255.0
no ip route-cache
ip default-gateway 10.10.3.254
ip http server
radius-server host 10.10.3.1 auth-port 1812 acct-port 1813
radius-server retransmit 3
radius-server key radius
line con 0
password xxx
line vty 0 4
password xxx
line vty 5 15
password xxx
end

Yes we get to solve this problem. Because it is a only a test senario, we installed everything new, win2000 server SP4,the certificate service and the winXP on the client.
The config of the switch is ok, we set the reauth-period and quiet-period to default.
Then we test the whole configuration with the IAS-Radius (MS). After this we install the ACS, following this document:(Certificates were already installed)
http://www.cisco.com/en/US/products/sw/secursw/ps2086/products_configuration_example09186a00801df0ea.shtml
Attention, we used the AEGIS Client not the XP Client!

Scanning problem with HP Laserjet 3050 and Windows 7 64-bit

I understand that to use the HP 3050 with Windows 7 64-bit I must use the Windows Fax and Scan software. However, if I try to scan using anything greater than a 200 dpi resolution, the document takes forever! Any workarounds?
Also, was doesn't pdf show up as a document type choice?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at: http://h30499.www3.hp.com/t5/Printing-and-Digital-Imaging/ct-p/bsc-412
I hope this helps!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Audio problems with SBLive! 5.1 and Windows XP Pro,

Similar Messages

Maybe you are looking for