Audio Properties issues in CS5.5

I'm trying to add audio to my Flash project by importing a .mp3 file to my library, selecting a frame, selecting the .mp3 file under properties, and putting Stream as the Sync setting. However, The audio won't play, and the layer in my timeline won't change into a waveform display. I'm trying to follow the instructions for adding sound shown in this video: Ep 10: Lip Sync | Happy Harry's HuHa Two How Tos - YouTube.
Thanks in advance!

I should also mention that audio in my timeline will play with the Event or Start settings, but not Stream. However, I need to be able to pause and play my sound at the same time as my animation, which I'm assuming (maybe incorrectly) the Stream setting will allow me to do.

Similar Messages

Audio sync issue

We're working on an animated series. We do a DVpro output of the locked show, send it out for the mix and get back a wav file of the mix. When we import this into FCP we have issues. We sync it up with our original voice track and for the first part of the show it's in sync but starts to drift quite quickly and by the end we're out by several frames (creating a very noticeable echo). Our sequence settings match the audio properties of the file (16bit, 48khz stereo). The only thing I saw that made me suspicious at all, that I can't seem to change, is that our sequences have, in the aud format column in the project window, the setting "32-bit floating point". But nowhere does it seem possbile to change this. Is this the problem or is something else going on? We know that the mix wav file is okay because when I bring it into the Avid (that we're using as an offline suite) it syncs to the show there, just not in FCP). The sequence length in both the Avid and the FCP are the same and the same voice track syncs in both, just not the final mix. Anybody had the same or similar experience?

We did see this pop up last week. Same thing... WAV file. Started to go out of sync noticable at about 5 minutes.
WAV file...
Hmmm
Was the Avid machine PC based?
We don't have an answer... but maybe the more clues...
I'll look into the 32-bit floatie thingie.
CaptM

XFCE4 Thunar and Audio Properties

Today I noticed while in (XFCE4) Thunar, and trying to edit an MP3 audio file in the AUDIO PROPERTIES tab,
it kept deleting what I was typing in any of the boxes there.
What could be causing this issue?
This can be replicated on both 32-bit and x86_64 xfce4 desktops w/ slim.
extra/thunar 1.2.1-2 (xfce4) [installed]
extra/thunar-archive-plugin 0.3.0-1 (xfce4-goodies) [installed]
extra/thunar-media-tags-plugin 0.1.2.99.git20110129-1 (xfce4-goodies) [installed]
extra/thunar-vfs 1.2.0-2 [installed]
extra/thunar-volman 0.6.0-2 (xfce4-goodies) [installed]
community/thunar-thumbnailers 0.4.1-3 (xfce4-goodies) [installed]
Last edited by Kilzool (2011-04-07 17:12:50)

I still have this issue, and no replies. Anyone have a clue why this is happening?

Premier Pro Audio Sync Issues XDCAM EX1

Running Windows 7 Professional with Premiere Pro CS 5.5. Having issues with an 18 minute XDCAM EX1 clip. The audio is out of sync and sometimes doesn't play. When I drop the clip on the timeline, the audio wave file indicates that the audio is 1/2 the length of the video. I did not have this issue before upgrading my system from CS 5 to CS 5.5 and the clip works fine on my laptop, also running CS 5.5. Shorter clips don't seem to have this problem. The clip also works fine when imported to my FInal Cut system. I have reinstalled Premiere but it did not fix the issue. Anyone else have this kind of problem? Any ideas on where to look on my system to fix this issues.

Yes it is a spanned clip and yes the BPAV folder is intact. I am now having a similar issue now on my laptop with a different clip. Both clips that are having problems on my Widows 7 tower and laptop in Premiere Pro CS5.5 wil load and play fine on my Mac with the XDCAM transfer program...so this definetely seems to be a issue with Premiere Pro CS 5.5. Had no issues with CS5.

Audio synch issues in QT

My project displays fine in PE8. No audio synch issues in the preview. After outputting the project to a quicktime movie withe LAN setting the audio becomes seems to run faster than the video, becoming more and more out of synch as the movie plays. Any ideas what might cause such an issue?

The Stream info in MPEG streamclip for files from both cameras gives me this info:
Bitrate: 30.31 Mpbs
Video Tracks:
DV/DVCPRO - NTSC, 720x480, 16:9, 29.9699999999999 fps, 28.77 Mbps
Audio Tracks:
16-Bit Little Endian mono, 48 khz, 768 kbps
I don't know if this helps.

10.4.10 Audio Popping Issues: Information Check with Internal Speakers

For people with internal speakers, or those without subwoofers: Please read all the way to the bottom to find a test that will determine whether you are also having audio problems, even if you can't hear pops.
We've had a lot of discussion about audio popping due to 10.4.10, and the evidence indicates that the audio circuitry is going to sleep to conserve power, even on AC-only computers like the iMac, Mac Mini, and (at least one) Mac Pro. Some people claim to not have this problem, but I'm wondering if they just aren't noticing it.
Having external speakers with a subwoofer, set to high amplification, are key to obvious detection of the problem. Let the sound subsystem go idle for 30+ seconds (wait a minute with no audio, just to be safe), turn up your external speakers really loud, and cause the computer to make a sound. You should hear a burst before the sound plays. If you repeat the sound, you won't hear the burst. This is the sound of the audio circuitry powering on, and the speakers are amplifying it.
About 30 seconds after the sound finishes playing, if you leave the volume of your speakers turned way up, you should hear a "pop" as the circuitry is powered off. Then, playing another sound will recreate the burst.
I haven't been able to hear these sounds with internal speakers, either on the Mini or iMac. But the problem still exists, and it is detectable... if you know what you are looking for.
The burst of the audio circuitry turning on also causes a delay in the audio. The delay is a noticeable fraction of a second, an it can easily be detected if you have a repeatable source of sound. I like Terminal.app, because I use that application all day, every day. Here is how you can check to see if you are also subject to the audio problems:
1. Start Terminal.app (in the /Applications/Utilities directory).
2. Wait one minute for the audio circuitry to shut down.
3. Without typing anything else, very quickly strike and release the Backspace key.
4. If you pressed the key all the way, the program should have caused a beep. However, if the audio circuitry goes to sleep, the beep should occur after you have moved your hand off the key. This is because the circuitry takes time to power itself on before playing the sound.
5. Now, quickly strike the Backspace key again. You should notice that the sound is produced immediately as you hit the key, without the delay you just witnessed.
6. Strike the Backspace key repeatedly, to confirm that there is no audio delay. Do this about once every second or two. If you press the key too rapidly, not all of the presses will produce sounds... this behavior is not related to the issue we are testing.
7. Wait another minute for the audio circuitry to shut down, and strike the Backspace key once more. You should again observe a delay between your strike and the sound production.
If you witness delays like this, your audio circuitry is also going to sleep, and you are having the same audio problems as the rest of us. However, either because you are using internal speakers, or because your external speakers don't have the appropriate response, you aren't hearing the same bursts and pops as the rest of us.
Please try this test, and report here. I want to build a list of people who previously couldn't hear the sounds, but still have the delay. This might give us a better picture of the scope of the problem.

Re: 10.4.10 Audio Popping Issues: Information Check with Internal Speakers
Your analysis of what is happening is right on.
The problem on my Intel Mac mini with external Klipsch speakers (two mid-range/high and a subwoofer) is REAL obvious as the system emits a hum like a Spinal Tap amplifier turned up to #11 when 10.4.10 powers down the audio circuitry
Then, if I play a song in iTunes, it first pops and the hum disappears right before playing.
Quite annoying.
Here's what I sent to Apple tech support:
Guys/Gals (OS X Engineers):
Concerning the Snap, Crackle Pop Audio problem in the 10.4.10 update:
Please. Just do the right thing and fix the audio.
There is no need to power cycle the audio subsystem to save .0005 amps on your laptops.
And then to make your Mac mini/iMac/other desktop users have to put up with it when using AC power is ridiculous.
Put the audio subsystem back like it was in 10.4.9 and let the laptop battery freaks looking for mini-amp savings get a "work-a-round".
Crikey!
Mac Mini 1.83 Ghz Intel Core Duo 1GB RAM Mac OS X (10.4.9) 20 Years of Microsoft-Induced Grey Hair

Playback pauses and audio sync issues with live video stream

I'm seeing playback pauses about every three seconds and audio sync issues with our live demo stream when using the OSMF/Strobe player. It happens on both our 2Mbps 720p stream and our 480p 750Kbps stream so it does not seem to be related to higher resolution/bandwidth streams. It also happens if I point directly to a stream asset or if I point to a .f4v with both streams listed for dynamic so it does not seem to be related to dynamic streaming specifically.
The same live streams play back very well without pauses or audio sync issues in the Akamai's dynamic player and even slightly better with JW 5.2.
I have viewed the OSMF/Strobe playback on three different laptops of various age (3 months to 2 years) and two are Windows and one is Linux. I have also tried the various buffering options on the Flash Media Player Setup and Strobe setup and it has not made a noticeable difference.
To see the stream with the Akamai player, go to: http://live.kulabyte.com
To see the stream with the OSMF/Strobe player, go to: http://live.kulabyte.com/osmf
I do not have JW set up for public viewing yet, but the two above show the distinct difference.
We are really hoping to start pointing our customers towards the OSMF player because of the support provided by the community and Adobe, but we have to get the quality of the playback to be acceptable first.
If someone has ideas on debugging I can PM the actual video assets to you.
Thanks,
Tim

Hi Tim,
You need to add this setting:
dynamicStreamBufferTime=8
The actual value can be higher or lower. The best practice is to use a value that is twice the keyframe distance. Anyway, try different values and see which performs the best for your content.
I know that the setup page does not contain this option and it is not documented in the UserGuide. We simply missed it. Sorry.
Also note that the dynamic buffering algorithms are not being used for dynamic streaming content. I tried to explain this here:
https://sourceforge.net/adobe/smp/wiki/Dynamic%20Buffering/
Looking forward to your confirmation that this solved your issue.
-Andrian

Compatibility issues with CS5.5 and Maverick 10.9

I'd like to know if there are any compatibility issues with CS5.5 and Maverick 10.9 before I upgrade from 10.6.8.

To be honest, I use the CS5 Premium Creative Suite and have had to upgrade all my app's to Mavericks because I have a new iMac, the other one just died.
I used the 'Time Machine' to backup and to transfer all the files, the Mac apps almost transferred 100% but not all successfully, especially iDVD, it was probably something that I did not click in the 'Time Machine preferences'.
If I had the choice, upgrade to 'Mountain Lion, I would revert back to Mountain Lion but not got the discs, I find Mavericks very clunky and slow and causing lots of issues with my Adobe applications.
So if it is not too late, I would wait a few months before upgrading to Mavericks.
Hope this info' has helped.

Flv audio sync issues & player 9

Greetings, I've been looking for a solution for weeks, and
thought I'd give the forums a shot.
I have a client site with 6 progressively downloaded flv
clips that play when a button is clicked.
The flv files are encoded with After Effects 6.5, and the swf
files are published in Player 8.
The video clips are made with an alpha channel of a guy
talking and are about 30 sec to 1 minute long each.
The problem is audio sync issues on certain computers during
playback even when the files are completely buffered.
The other problem is that these flv files won't play on
computers that have player 9 loaded.
I'm investigating whether there are audio sync issues when
encoding flv files from AE 6.5, but still really
confused about the player 9 issue. I was wondering if there
are updates to 9 I can recommend to my client
or if adobe knows of any bugs that are currently being looked
into.
Thanks,
Kevin

I may just be talking to myself here, but...
Could there be any difference in the way an flv plays when
you
import the flv to the stage, as opposed to playing it
dynamically
using the NetStream class? Could this cause any audio sync
issues? Does Flash Player 9 have any difficulties displaying
flv files loaded dynamically?
Any ideas from Adobe folks would be great. Thanks.

Quicktime audio sync issues

Hello,
I have quicktime version 10 (128). I can't get anything to play in it without there being severe audio sync issues every time. I can't figure out why. Can someone please help me fix this problem?
When I export my movies from imovie to quicktime it will play in quicktime, properly and without sync issues, for a really short period of time - seconds. But after that, the audio no longer matches the video. I know it's an issue in QT because when I upload the video to YouTube there are no audio sync issues whatsoever.
Help?
Thank you so much,
YahYah

I am dissapointed to see that no one has addressed this issue. I have similar issues.
The MP4's play perfectly in the quicktime player but in Premiere they are off by varying degrees sometimes up to a minute even. I had similar problems in the past with files from the same producer. However last time I was able to change the extension before importing and then sync them up manually on the timeline. It worked everytime. This time however when I change the extension Premiere brings it in as an audio only file.

MP4 Video from Flip Ultra having Audio Sync Issues

All of sudden I've started having audio sync issues with the mp4 footage exported from the The Flip Ultra camera. Ive tryed the mp4 footage in both windows 7 and Mac OS X and i'm having the same audio issue but when I watch in the flip software or in iMovie no issues. Any know why this has just started happening?

Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

How to open sounds and audio properties using Labview function

Hi All,
How to open the sounds and audio properties of the control panel using the Labview system exe vi.
Is there any dll also to open this property.
If there is dll which is that and how to program the dll to serve my purpose.
Solved!
Go to Solution.

Have you looked at the "Graphics and Sounds" section within the Functions Palette (Block Diagram)? There are VI's that already exist for this.
R
Message Edited by JoeLabView on 09-04-2008 07:44 AM
Attachments:
sounds.PNG ‏12 KB

Issues Illustrator CS5 ink manager/file collection/rotating views

I work alot on food packaging in illustrator and have a few issues with CS5 that perhaps someone has a workaround for?
I need to be able to view effective ppi resolution on links and collect/package all links into a folder. These features are in indesign, why not illustrator?? It would make sense for the effective PPI/final output resolution to be displayed in the links panel like it is in indesign.
Man i wish they had included the ability to rotate the view in illustrator, would save a lot of neck strain on boxes.
Regarding inkmanager, i want to create a pdf for client proofing from an illustrator file that has 3 spot colours and cmyk, there is no option to convert spot colours to process in illustrator like there is in indesign. The spot colours are coming out black in the pdf instead of the actual colour.

Effective PPI of Linked Images: Although you cannot see the effective PPI in Links panel, you can find the effective PPI of a linked image in the control panel once you select the linked image
Convert Spot to Process: Spot colors can be converted to process in Illustrator, select all objects applied with spot color and then access Edit Menu > Edit Colors > Convert to CMYK or Select the Spot swatch in Swatches panel edit the spot swatch and make it process. These are alternate ways you can convert Spot colors to Process.
Spot colors should not be exported as Black in PDF, please report this issue to Adobe, before doing that please check whether Overprint Preview is turned on in Acrobat. You can check this Illustrator itself by place linking the exported PDF in new document and turn on Overprint Preview.

Compatibility issues between CS5.5 & new macs?

Hello all. Does anyone know if there are compatibility issues between Audition CS5.5 and new macs? Just got a 2013 MacBook Pro (OS X 10.9) and haven't been able to install my copy of CS5..5, which I've been using on an older mac for years. I've tried both the original installation disc and a download.
Thanks!
-- Tony

Depends entirely on the application. You should probably visit the
individual product forums for details.
I will tell you this. For InDesign you're not going to be happy at all.
Bob
CBH_admin <mailto:[email protected]>
Monday, January 7, 2013 3:16 PM
>
Compatibility issues between CS5.5 & CS6.0?
created by CBH_admin <http://forums.adobe.com/people/CBH_admin> in
/Creative Suites Windows/ - View the full discussion
<http://forums.adobe.com/message/4974872#4974872

Audio Sync Issue on Export

Hello,
I have an issue with an export that I am attempting to do. I have used 50 still photos (psd) and created a slide show in after effects. It is working well. I attempted to create 4 comps made from standard dv footage. 720 x 480 from video cameras in the 1990s. I need to export out eventually to 1920 x 1080 for showing on our TV channel. It would be a .m2t format. When i attempted to do a test export, everything worked fine....the photo comps were good, the only problems were the video clips that had video/audio sync issues.
I am not sure what the problem is exactly. I feel my workflow is not right and that is leading to this issue.
I created the 50 slide comps in AE
I then used the hour long DV clips in PrPRO to make sub clips (about 30 seconds each, total of 8)
I rendered these out to then import into AE
imported into AE and made comps out of them
then render out a test file that would be my finalproject in mpeg format.
I would like to not render the video a second time and would like, basically to take my AE photo comps straight to prmiere pro to insert the DV footage but don't know how exactly to do that.
Is there something that you can recommend.
Thanks,
M

We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

Audio Properties issues in CS5.5

Similar Messages

Maybe you are looking for