Audio record form headphone sound and microphone sound together

hi
     We need to record audio sound and microphone sound record at same time.please suggest us because we have a urgent requirment , thanks in advance...

1.We need more info to help you.Like what OS are you running_Vista,XP,??
2.What model is your laptop? Check for complete model number as shown in section 1 below,and post it.P/N in section 2 also will help.
http://tinyurl.com/2krh3u
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • How do I play audio from my headphone jack and internal speakers?

    How do I play audio from my headphone jack and internal speakers at the same time ? I have a splitter for my audio jack so that when i connect up my second monitor I can have it so it also plays audio as well as anything else i have connected into the jack but how do i let the internal speakers emit sound at the same time?

    Hello,
    If you mean the internal speakers in your Mac, you can't play audio through them at the same time you have anything plugged into the headphone jack. When you plug something into the headphone jack, it disconnects the internal speakers.

  • No Audio on built in camera and microphone

    please help iMove has no audio every time i try to use the built in camera and microphone to record straight in.... there is NO AUDIO !!

    SophiaSlater wrote: ... iMove ... record .... there is NO AUDIO !!
    (0) Unless you are trying to use an old external (Firewire) iSight, there is no need to post in the iSight forum.  Unlike external iSights, MacBook Pro built-in cameras don't have integrated mics.  MBP's mic is a separate device from its inbuilt camera.
    (1) Use iTunes, Safari, or QuickTime, etc. to verify audio OUTPUT is working on playback outside iMovie.  If not, check your speaker volume and mute settings.  If you use external speakers or headphones, check their connection, settings, and power switches.
    (2) Record a short audio test using a non-iMovie app like Photo Booth or QuickTime X to see if it works.  If iMovie is your only trouble, and if the following suggestions do not resolve your issue, you may need to reset iMovie preferences or even reinstall the iMovie app.
    (3) If your audio trouble is ONLY in iMovie check iMovie's VoiceOver audio settings.
         • Verify you are using the correct "Record From:" audio input source.
           (Yours choices may differ from those shown in the image above.)
          • Also verify that your "Input Volume:" is set loud enough.
    (4) If your trouble continues, also check your MBP's
          > System Preferences... > Sound > Input settings:
         • Verify you have selected the correct "sound input" device.
           (Yours choices may differ from those shown in the image above.)
         • Also verify that "Input volume:" is set loud enough so the
           "Input level" meter flickers when you speak.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • My headphones speakers and microphone are not working please help

    hi i have had my hp windows 7 lap top for 2 years and never had a problme but recently my speakers and microphone are not working even if i put in my headphones i have installed new audio drivers checked my sound settings and did a restore to a date and a factory reset and still no sound ( my speakers say there working the geen bar goes up and down showing the volume but still no sound) please help me thanks

    Hi,
    Please use the following instructions to check and fix:
       http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I tried to delete an audio recording on my iphone and pressed edit configure and now am locked out of it

    I tried to delete an audio recording from my iphone ipod and pressed edit and got a message saying configur ipod I did this and now I am locked into only one topic and recording.  Now after a couple of hours I cannot get into my ipod at all. 
    Can anyone help. Thank you.

    Hi,
    I tried to log in to iCloud but a message appears telling me I "can't sign in because my account was disabled for security reasons....reset password at iforgot.apple.com". I don't know why this happened.
    I reset both my Apple ID and password.
    When I tap Settings iCloud is listed on the left side between General and Mail, Contacts etc.
    Tapping iCloud brings up a log in screen for iCloud which shows my old Apple ID and requests the password. If I put the password in I get the message as above.
    If I use the new Apple ID/Password I get the message "the maximum number of free accounts have been activated....
    In settings there is no option to "Delete Account"
    Any suggestions??

  • View audio wave form in A1 and A2 etc in the timeline instead of the Viewer

    It's likely this is an amateur question buuut -
    Is there anyway to get the audio wave form to show in the Audio layers in the timeline. The only way I've seen to adjust and play with audio is when I double click on one of the tracks and then the audio tab in the viewer will open. I want to be able to see waveform in the timeline and then add or remove markers and adjust from the timeline -
    There's got to be some way to adjust audio and play and stop so that you can watch the video and hear audio changes as you tweak it at the same time.

    SEQUENCE--> SHOW AUDIO WAVEFORMS

  • Audio recording problems with greatdy and sunflower

    Since I upgraded to OS X 10.9.3 I've not been able to capture streaming audio using Greatdy or Sunflower with Audacity or Sound Studio.  Any advice?  Or something I've overlooked?

    Can you provide a lot more detail? This ARTICLE will give you tips on what would be so useful. There is probably an answer there. If not, the info will help others to help you.
    Good luck,
    Hunt

  • How do you take MANY slices of an audio file on garage band and merge them together without dragging and dropping each one?

    I record my classroom lectures in law school to help study for finals. However in the hour and a half class there are many pauses, bad questions, wrong answers, useless stories or announcements that I do not have to hear again. I import the audio into gargae band and cut out all the unnessesary stuff. I end up with a file of 100 + clips. If i spend the time dragging and droping them so there are no spaces in between clips the process takes forever. However the reward is relistenign to an hour and half lecture in 15-20 minutes. Thats about how much content the professor gives. Is there a way to merge all the audio by selecting some option? I bascially want garage band to just slide all the clips and condence it to one clip.
    I have takent the time the last few semesters to do this the hard way and have been able to relisten to an entire class in 3.5 hours which is huge! if you have ever been in law school. But I don't have that kind of time anymore. HELP!

    petruch wrote:
    Is there a way to merge all the audio by selecting some option?
    http://www.bulletsandbones.com/GB/GBFAQ.html#cutsectionnospace
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Audio in headphones sounds like garbage

    I am trying to record a simple voice track using a M-Audio MobilePRE USB preamp for my mic as well as my headphones.  The audio in the headphones sounds really bad like there's a latency or echo.  Any ideas on how to clean this up?

    Is the unit mixing open mic audio from the MobilePRE with the the playback audio input from your Mac?  If so, adjust that mix setting so you're getting computer audio only. If not, have you tried just plugging the headphones direct to the MacPro ie to make sure everything is ok from the timeline and confirm the issue is from the MobilePRE.
    Hope it helps
    Andy

  • Giving advice on audio recording

    I first started using Captivate when it was Robodemo 5 and
    that was not all that long ago. I remember when I first downloaded
    it. I thought it was the greatest training software ever. However I
    did have problems. The most long lived problems were with audio
    recordings. I know that many people have. On some of the forums I
    read where one person had given up on Captivate. They did not like
    the inconsistent recording of the audio. Sometimes it would be deep
    and resounding the next slide would sound as if you are at the end
    of a tunnel,and the very next recording would sound metallic and
    soft sounding.
    Just like with everything else if you are persistent enough
    you will find a solution. I tried various mikes some expensive
    others less expensive. They all produced the same results.
    Inconsistent recordings. The recordings to me were passeable but
    all not that great. Then I ordered one of those newer usb condensor
    podcastiing mikes.
    All I can say is wow! Those new podcasting mikes they level
    out the sound.You can still notice that one recording sounds a
    tiny,tiny,different than the next,but barely noticeable.
    Most of us are not radio announcers or professional
    broadcasters however to me the mike made an incredible difference
    in Captivates audio recording quality.

    Hello Rick!
    The microphone is around 80 dollars, it comes with a soft
    ware preamp, and I have always recorded directly into Captivate.
    Even a low bit rates and encoding frequencies it still sounds good.
    All my Captivate files are produced for the web. Html and .swf
    files.
    It is the mike Rick that made the difference. It is a Samson
    microphone. It is quite large and heavy. I found out about it
    through podcasters. I wondered what podcasters were using to record
    audio. Audio quality would be important to them. What I wanted was
    the best mike for recording onto a computer. The podcasters are
    fanatics about the mikes they use.
    Here is the advert from Samson.
    "The C01U USB Studio Condenser Mic is the first affordable
    studio condenser mic with a USB interface.
    For the first time ever, musicians who record music on
    computers have a simple, affordable way to capture high-quality
    vocal and acoustic instrument performances.Seamless integration was
    the idea, and it was obtained by creating a studio condenser
    microphone that can be plugged into any computer with no in/out
    boxes, no expensive computer pre-amps, just a USB cable.
    The C01U condenser microphone is based on our wildly
    successful C01. It features a 19mm internal shock mounted diaphragm
    with a cardioid pick up pattern ensuring pristine studio quality
    recordings."
    Most online music stores carry these . Find one that you can
    trust. Just Google Samson microphones.
    Everyone can have good quality audio recorded directly into
    Captivate. For those new at audio recording listen to podcasters
    and other broadcasters. Animate your voice to make it more
    interesting,speak at the same volume level, get a "pop" filter or
    make your own with a nylon and reformed wire coat hangar. Practice
    with your voice ,adjust the settings ,test various settings out and
    soon you will be saying " wow"!
    http://www.samsontech.com/products/productpage.cfm?prodID=1810

  • Audio recording with Satellite L300

    I have a USB audio interface that I want to use for audio recording with the webcam and other software. I can monitor sound via USB interface but can't record.
    In the CAS for webcam my USB is not listed as a device, so I can't select it, only the built in realtek mic.
    Any help much appreciated!!
    chris

    Hi Akuma, hey thanks for replying. sorry I never checked back cos I thought my post had disappeared when I first tried to sort this problem out. I have tried (and am able to) select my Tascam US 122l interface in the control panel sound and audio devices , I've got the latest drivers and firmware downloaded. Ntrack studio, cubase, Kristal audio, all allow me to select my usb interface, for a few moments will record, always within 30 secs of recording or play back it makes a few squeeks and pops the craps out and won't work at all until the usb interface is unplugged and re plugged in. I've fiddled with all possible latency and buffering options where available as well, no joy! Same problem.
    My usb interface worked beautifully with Kristal Audio downloaded onto my wife's slower, older pc with less memory also using vista, so the problem seems to be with the L300.
    Thanks again Akuma, and thanks in advance if anyone can help with this problem that's seriously doing my head in!

  • Making a simple audio recording

    I know this is a stupid question, but I'm not sure how to record a sound bite on my imac. Is there a simple recording application included in the OS? (OS10.3.9). Using something like Garageband would seem like overkill, plus I don't know how to use GB, having never really had a need for it.
    What I need to do is interview someone for a school assignment, and I have to email it to the instructor.
    Thanks for any help.

    I figured this one out for myself. I googled "audio recording on a mac" and found a free program called Audacity. You can use it to record audio and then save as a wav or whatever file.

  • How do the copy the Recording form one client to another client.

    Hi all
    I have one scenario like
    We need to process the sales documents which are not process to output(means send the document to printer) .
    For that I have to write a BDC program,
    In that program we  need to list out the all the documents which are not process .
    Then we need to do the Recording for VA02.
    NAVIGATION IS LIKE : va02 --> enter the doc No --> go the Extract(main menu) --> output --> Header --> Edit --> select the output type -->Save --> go the Sales Document(in main menu option) --> issue output --> print.
    But what my quarry is we have  to do Record that T-Code (VA02)  client 040 but we don’t have any test data (any entries),
    We have another client 093, in this client we don’t have authorization properly, means I able to Record but I am unable to create the program after recording why becace we don't ahve authorization for SE38.
    Please tell me is there any possible Export the Record form one  client and Import to another client.

    Hi Amjad,
    Yes we can transfer from one client to another client.
    to copy client from 901 to 903. if you have created a recording in client 901, go to transactions SHDB, double click on the specific recording, it will open the recording. there got to menu path: recording->export. export to a text file.
    in client 903 create a sample recording. open the recording in change mode, delete all lines. then go to menu path Recording->import, import the text file.
    it will works fine.
    Regards
    Krishnendu

  • Resources for audio recording with LE 7.2

    Greetings, folks. I'm a recent convert to Macs and to Logic Express, having futzed around with various flavors of Sonar and wanting to take advantage of the many nice features of my Macbook. I've been working through the Logic Pro and Express training manual and I think I'm coming up to speed on using LE OK. My main use for LE, though, is going to be audio recording small acoustic ensembles (and mainly acoustic guitar and vocals), and I could really use a fuller discussion of LE's audio recording and editing features than is found in the training manual. What I'm really looking for, I suppose, are task-oriented explanations of how to do things such as comping tracks, rather than the system-oriented descriptions of what you find in the various LE windows. Any recommendations?
    Thanks,
    Trent
    Macbook Mac OS X (10.4.9)
    2 GHz Macbook w/ 2 gigs memory   Mac OS X (10.4.9)   Logic Express 7.2, Presonus Firebox interface

    You might look here and see if any of these tutorials help:
    http://www.youtube.com/results?search_query=Logic+tutorial&search=Search

  • I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

    I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
    Thank you,
    Chris

    Michael,
    Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
    As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
    Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
    Best regards,
    David

Maybe you are looking for