Audio recording also recording midi mute events. How to remove

Greetings...
I new to Logic, recent convert from Cubase. Anyway I have an odd problem. When I record a stereo audio track and Logic seems to be recording Midi control data events as well. To be specific I have a Tranzport controller that I use to start and stop, mute record etc. Anyway I have an audio track that sets the mute when I start playback, all by itself. Then after a bit it turns off the mute. Seems to be midi commands that were captured as part of the control track that associates with the audio track.
Anyway my problem is that I can't find where this midi mute even is stored in the project. I just want to remove it but I'm at a loss as to where it is stored. I had a control track that I found and removed that and it seemed to take out most of the midi control events but not all of them.
Sorry if my terminology isn't quite Logic but as I said I've come from a different environment.
Anyway I hope this makes sense enough to have one of you point me in the right direction.
All in all I'm really enjoying Logic Express!!
--Bryan

Hi...
I checked the automation display and it shows 0db throughout so that is not what is muting the output.
However you said "In the midi track did you search in the Even List Editor". Well that is kind of my problem. I don't have a midi track. Only audio takes in a region. When I play back the region the output starts muted (mute light on) then the mute goes off (light off sound on) for a measure and then mutes again for another two measures. Then mute goes off again and the recorded music plays back normally from that point on. This is why I think Logic has captured my control surfaces Midi mute events. I had one take where I pressed the mute button on my Tranzport a couple of times at the start of the recording. These events are captured and repeat each time I play back the recording. I just can't find where those events are stored. The event list only shows the Comp and two takes, no midi control events.
I hope my description makes sense. I'll keep looking. The midi data must be somewhere in there, it's just sitting there laughing at me.
Thanks..
--Bryan

Similar Messages

  • I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

    I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

    What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
    What is the brand/model/settings of the camera that recorded these videos?        ony  PMW 320
    When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
    the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
    the video in the Premiere Elements Editor, how many channels does the Audio Meter display?   
      I just drag and drop video and when playing back only channel 1 will appear
    What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
    I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
    Thanks for the help if possible,Kevin416 873 8374

  • How to remove "Records passed" list when printing ALV report

    Hi all,
    I have developed an ALV report, in which I have used reuse_alv_list_display functional module to print the output. After pressing print button, when I view the output in spool request transaction, an additional list with Number of records passed and "Calculated total records" is displayed. How to remove this additional list.
    I am using Get_print_paramaters FM to print.
    Thanks,
    rajan

    Hi
    Suppress the messages of the FM by commenting the exceptions and message statement
    Regards
    Shiva

  • How to remove old audio/video

    I have recently moved most of my photos and videos to an eternal hard drive but I am not sure how to remove everything from my HD.  I deleted everything out of Iphoto and deleted the trash but if I do a search for video it still shows videos in Iphoto.  Also I am not sure how to remove all of the old video from Imovie without doing any damage.

    I deleted all of my pictures/videos from Iphoto, emptied the Iphoto trash, and got 30 gigs of storage back.  Now it was showing an empty library but if I searched for all movies there were a ton left in Thumbnails, originals, etc.  Hidden folders in the Iphoto Library.  So even though I couldn't see any photos left in Iphoto I decided to delete the enitre Library and start over.  I dragged the library to the trash and I got another 30 gigs of storage back!  All for hidden backups of files that I thought I had deleted.

  • How to remove pdf files inside ibooks on mavericks OS

    Hi, I tried to delete PDF files in iBooks on Macbook Pro Mavericks OS , but it is also deleting in source file.
    how to remove PDF's in ibooks without deleting source file. please help
    regards,
    bpk

    I've not long worked out how to do basic things on my iMac but have had some coaching on other forums, as it goes this happened to me this morning.
    Inadvertently, I managed to get all pdfs into ibooks and faced similar "delete" problem, couldn't drag the files out of ibooks either: Accidentally I found all ibooks info in a library through finder, took a while but right clicking "move to trash"  got rid of them but not from pages/documents!
    Re-opening ibooks initially showed the pdfs still in place, except after double clicking one a message appeared telling me the file could not be opened, then immediately the remaining books were shuffled and pdfs disappeared - still in documents though, and able to open.
    Hope this helps, there may well be an easier way...

  • Call log in email inbox?? how to remove??

    Hi - help needed!
    In my blackberry email inbox, my call log is also showing. it is annoying - how to remove????
    thanks
    Solved!
    Go to Solution.

    Hi there and welcome to the forums!
    You can resolve this using the following steps (I've done the same on my Storm for the same reason as you):
    Open the phone application, then press the BB Menu button and select Options
    Choose Call Logging and then change the call logging options to None.
    This will still show an icon for missed calls, but it will remove the call log from your main messages folder.
    I hope this helps! 
    If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
    If your issue is resolved, don't forget to click the Solution button on the resolution!

  • How to record midi and audio at the same time?

    Hello,
    I have a Roland sh-201 synth and Logic 9. When I use patches from the sh-201, it will record it via audio. What if I wanted to record the audio but also have the midi information as well? How would I be able to accomplish this? My synth is connected via USB which carries both midi and audio. Sorry for my poor english, but any help would be greatly appreciated.
    Thank You.

    Hi
    Logic will record both audio and MIDI at the same time, but you *MUST* have the Software Instrument/MIDI track selected in the Arrange Track List.
    The audio track must be 'Record Ready':
    HTH
    CCT

  • How can I copy an audio recording in Skype?

    I have an audio recording of one of my contacts on Skype. 
    Can you tell me if there is a way to copy this recording to my hard drive and if so how? 
    Can I do it with MP3 Skype Recorder 4.11 and if so how?  Where would it be recorded to if I can do it this way?
    Any help with this will be really appreciated
    HB

    I already have a Skype recorder for any incoming or outgoing Skype or telephone calls.  I use MP3 Skype Recorder for that.   What I'm trying to achieve is different.
    I have an existing voicemail message in Skype itself from one of my Skype contacts.  It is this voicemail message that I want to save to my hard drive somewhere so there is no chance of me losing it in Skype itself.
    I right clicked on the recording and there is an option in the context menu to 'Copy Message.' I clicked on this but I don't know where to save it to on my hard drive so I can play it whenever I want from there as a file.
    I would also like to know if there is any way to change this voicemail message to another file format to play on my hard drive.
    Can anybody help me with this scenario please?
    Thanks
    HB

  • Recording MIDI and Audio at the same time....

    I am having an issue recording a simple piano softsynth along with a guide vocal. Whenever I punch in, the audio punches fine but the MIDI/softsynth track hiccups, causing a lag in sound even though the MIDI info seems to record fine. Also, this does not happen when recording MIDI alone-everything punches in fine. Is there some setting I'm missing somewhere or is Logic not able to do this smoothly? Any help would be greatly appreciated. Thanks.
    Message was edited by: dbboy

    Hi Fred,
    I bring you my wisdom...Yes there is hope.
    What you need to do is set the part you want to bounce into cycle mode. Dont worry, it will not cycle, it just knows now where to start and stop.
    Audio and Midi can be recorded at the same time, as long as the midi is from an AU within the mac and not from an external source.
    Good luck,
    Joe
    There is always hope

  • Can't Record Midi and audio  Simultaneously

    I just noticed that I cant record audio and midi simultaneously. I wanted to record a audio vocal track as I was recording a midi piano track but it wouldn't record. If I selected the audio track, the midi track wasn't heard. If I selected the midi track, I could hear the piano, but the audio wouldn't record. Weird. I had to record the midi track, and then go back and arm 2 audio tracks for recording. One for the vocal and the other to convert the midi track into a audio track. I don't understand why I can't record midi and audio at the same time. I am using a MOTU 896HD for my audio, so I can record up to 8 audio tracks at a time.
    Does anyone have any clues as to how to set this up to record midi and audio at the same time?

    Setup your audio and midi tracks and then hold the shift key and hit the record button on each of them. Both audio and midi will record.

  • How Much External Hard Drive Partition Recommended for Audio Recording?

    Hi,
    I have a glyph 300 gigabyte drive. Does anyone have thoughts on how to partition it? I was thinking 200 gb for samples, etc and 100gig for recording audio? Is that too much or too little for recording audio? Or should I use all 300 gigs for audio recording. I also want to do video editing in FCP eventually.
    Thanks

    Okay...There are 3 guys and each has a basket full of marbles. The 1st guy has a basket full of red marbles, the second guy has a basket full of blue marbles, and you have a basket full of red and blue marbles. All three of you have your left hand tied behind your back. You are in competition with the other two guys, you are on your own and they work as a team. Someone starts shouting give me 3 reds and 2 blue marbles. You reach in your basket and grab 3 reds and 2 blues as fast as you can, but the other guys are way ahead of you because there are 2 of them and they each only have to worry about grabbing one color of marble at a time. So you lose the contest badly... that is why you need at least
    2 hard drives instead of just one (whether partitioned or not). Buy an external firewire drive. you'll be glad you did.
    RealDave

  • Audio recording on a MIDI track???

    I have a midi drum track (software instrument track, Ultrabeat). I'm not sure how I did it, but apparently I recorded some audio on it as well, I probably recorded an audio track and had this track record enabled - still it's weird that to me to have audio contents in a midi track.
    There is no audio region that shows up in the arrange mode.
    How do I get rid of it?
    Thanks.

    I'm not sure what you mean by that,
    maybe you have the Ultrabeat's sequencer on and when you press play in Logic the sequence you created in UB starts playing before the MIDI Region you have in the Arrange and that's confusing somehow.
    It happens
    I'll check your screenshot when you upload it later on
    A

  • Recording MIDI and audio simultaneously

    I just tried something new in Logic Pro 7.1.1 that didn't work the way I expected.
    I have a set of Roland V-Drums that output both audio and MIDI. I tried to record both using an audio track and the MIDI drum track. I also tried recording using an audio track and a virtual instrument track. In both cases, I could only record on the currently selected track (either audio or MIDI) but never both.
    On all the MIDI tracks, the record button won't stay lit unless I have the track selected. And if I select a MIDI track to keep the light on, the audio track won't record even though its record light is lit.
    Any ideas?

    You need to have both the MIDI track and at least one Audio track selected. Here's an answer with a picture:
    http://www.logicprohelp.com/viewtopic.php?t=4099

  • How do I fix bad Quality audio recording in Captivate 4

    I am having trouble recording decent quality audio in Captivate 4.
    What is happening is after I do the screen and audio recording when I play it back the audio is choppy.
    It also kind of sounds like the audio is quickly echoed and then clipped.
    Finally this clipping and choppiness seems random when it happens.
    I tested this by recording 5 minutes of the demonstration (which recorded with only 1 glitch in the beginning).
    When  I just recorded the second half when I played it back in Captivate it  was very choppy again throughout the audio making the complete session  unusable.
    I am doing full motion recording of an application at 1024x768. I have tried all audio recording bitrates and have even gone up to 128kbps 16bit mp3.
    I am using a high quality Audio-Technica AT2020 USB microphone.
    I am running Windows Vista Service pack 2 fully updated with 4GB of memory on an Intel xeon W3503 2.4Ghz in 64 bit mode.
    I have installed the latest patch update http://www.adobe.com/support/captivate/downloads.html 4.4.0.1 hoping that it waould solve the audio bugs to no avail.
    Please let me know what else I may need to do to get Captivate 4 working like it should.
    Are there any other settings or tests I should perform to get audio recording working.
    Why would I even want to pay for Captivate 5 if Captivate 4 has worked so randomly for me.
    Using 3rd party software like Audacity and even Adobe Soundbooth seems absurd when Captivate has audio recording built in.
    For the time being I have gone back to Camtasia on another system because it actually seems to work but need to get Captivate working on my own system.

    Try "Rapid Recorder" from store....it works well.

  • How do I select a midi input device and record midi?

    I have several midi input devices connected to my computer. I use them regularly with Digital Performer. I am trying to record a single midi track in Garage Band using an Oxygen 8 keyboard. In the preferences GB says that it sees 7 midi devices. How do I route midi with Garage Band and how do I tell Garage band which midi device to record from? When I create a midi track (well...I think that it is a midi track) and I try to record I do not see any midi notes being recorded.
    Searching the help file for midi provided surprisingly little information. I am sure that this is simple stuff...perhaps so simple that I am missing something obvious.

    Yes, if the controller sends the right MIDI messages
    What do you mean by "the right midi messages"?
    I have a virtual instrument (with for example) a delay effect knob. I would like to turn a knob on my midi controller and adjust the delay in the virtual instrument (as I can in just about any other sequencer). Can GarageBand do this, if so, how?

Maybe you are looking for

  • Do I need to rebuild/reformat?

    Just wondering if anyone can assist.  Fairly new to Mac having seen the light!  I used to rebuild my Windows PC's once a year with a complete reformat and fresh install of the OS.  Do you need to do the same with Macs?  Does it help?  If so how often

  • ORA-04092 trying to analyze table

    Hi, I was trying to analyze some tables issuing: analyze table owner.table_name compute statistics; Immediately raises the ora-04092, as far as I seen, read, and googled, this ORA error occurs only when someone try to commit inside a trigger, but cle

  • Need to not have first letter capitalized in text boxes

    How do I get the first letter in a text box to NOT capitalize? Boxes in some web forms for email addresses are simply text boxes, so when I start to enter my email address the fist letter is capitalized and I can't seem to figure out how to avoid thi

  • Archived an iDVD project to an external drive but can't access it

    My DVD player on my MacBook Pro is broken so I'm trying to transfer an iDVD file to my Mac mini so I can burn DVDs. I tried archiving my project to an external drive and everything seemed to work normally but the project doesn't appear in the finder

  • How to watch movies in english language

    Yesterday I bought apple tv from Germany. It´s playing movies in German language, I want to watch in English language. Anyone have solution?