Audio Recording problem when pause, goes back to beginning of recording

I audio recorded lecture. When I pause or stop, then resume, audio recording starts from the beginning instead of from where it was paused. WHY?

Did you Copy over the full folder structure from your SD card? You will want to do that, and not just Copy over the media files. PrE (and PrPro) uses some of those other files.
Good luck,
Hunt

Similar Messages

  • Safari problem:  when I switch back into safari from another application, the menu bar comes up but no tabs or windows.  What's going on?  Just started yesterday.  I have found a workaround: when I Command Tab back to safari, I hit command T to open a new

    Safari problem:  when I switch back into safari from another application, the menu bar comes up but no tabs or windows.  What's going on?  Just started yesterday.  I have found a workaround: when I Command Tab back to safari, I hit command T to open a new tab and Command W to close it, and my other tabs are visible.
    I have tried shutting down, closing tabs, with no success.  What's going on and how can I fix it?
    Thanks,
    Cindi B
    PS:  I'm not sure of the actual OS level, but I have not allowed it to upgrade to Maverick yet; concerned about it because of a few things I've read...

    A Safari extension or third party plugin may be causing the menu bar issue.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.
    As for which OS X is installed.
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac.
    The version is noted there.
    v10.6 Snow Leopard v10.7 Lion  v10.8 Mountain Lion
    It's your choice whether or not to upgrade to Mavericks. If you decide to do this, make sure your Mac meets the requirements noted here.

  • Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?

    Hi there, when i press the start button on my G4 twin processor, the light inside the button comes on until I let go when it goes back off and the machine does not start up. Any ideas?

    Sounds a bit like the Power Supply, but...
    If you don't know the model, find the Serial# & use it on one of these sites, but don't post the Serial# here...
    http://www.chipmunk.nl/klantenservice/applemodel.html
    http://www.appleserialnumberinfo.com/Desktop/index.php
    How to find the serial number of your Apple hardware product...
    http://support.apple.com/kb/HT1349
    How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
    http://support.apple.com/kb/HT1939

  • Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

    Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

    so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

  • Timeline playhead goes back to beginning when it hits end

    Is there a preference or something somewhere I need to
    turn off to prevent the playhead in the timeline from
    going back to the beginning of the timeline and start
    playing again from the beginning, after it plays through
    the entire timeline once and it's the end?
    Thanks.

    Why not mark it as 'Answered' (which you should do anyway) then post what you did to fix it. That would help others who encounter the same problem.
    Ctrl+L toggles timeline looping.
    Andy
    Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E   Mac OS X (10.4.7)  
    "I've taught you all I know, and still you know nothing".

  • Encore CS4 Loop Point goes back to beginning

    Hi all,
    Thank you for your time reading this. I've searched the forum and didn't see a resolution for this type of issue. Please accept my apology if it is noted somewhere and I didn't find it.
    I created a Motion Menu in After Effects CS3 that is 00;05;07;00
    I then saved the layers as a psd files (I didn't create buttons within AE)
    I created the buttons I wanted within Encore.
    Turned off all of the layers in Encore except for the buttons that I created
    I created an AVI file out of the After Effects composition which is set as the Motion menu in Encore
    The only problem that I am having is that when the video ends it goes back to the very beginning of the motion menu instead of the Loop point I set at 00;00;14;00 (14 seconds if I did that right)
    I have Animate buttons checked
    Loop point: 00;00;14;00
    Loop #: Forever
    On the basic tab, for both End Action and Override I went to Specify link and chose the Motion menu(AVI) that I created. I checked the box at the bottom "Set to Loop Point"
    I'm not really sure what I'm doing wrong. This is my first time with a Motion Menu, so I'm sure I'm doing something wrong.
    Thank you for your time on this
    Best regards
    Jeff

    Jeff,
    Thanks for explaining.
    I'm now using CS5 and I'd heard the two menu thing wasn't necessary any more so:
    A week or so ago, I was trying to figure out the same thing.  I posted this question here http://forums.adobe.com/thread/852185?tstart=30.
    Unfortunately, there were no answers, and by then I had found in the Encore Help under Loop point (as you did) this group of instructions at the bottom
    "Set menu loop back
    You can set a loop point in a motion menu to a point from which you want the motion menu to loop, rather than the beginning. This is useful when the starting point and ending point of the motion menu are separated by a long interval.
    Select the menu from the Menu panel.
    On the Properties panel, set the loop point.
    Select Specify Link from the End Action Options menu.
    Select the target from the list, and then select Set To Loop Point, and click OK"
    However, I can't get this to work similar to you problem.  That is, if I select the "Play all, Scenes " menu as the target, since it has a motion menu, I can select "Set to loop point", since it's not greyed out.
    However, if I select the next menu "Scenes" with no motion menu, the "set to loop point" is greyed out.  If I select the Play all etc with the motion menu,  then the loop point doesn't work ie it still loops back to the beginning of the motion menu.
    I'm not sure what the work "taget" means from the last sentence in the suggestions.
    I was hoping an Adobe person would chime in, but so far no luck.
    I'm doing this in a SD project and not BluRay.
    Sorry to ramble.
    John

  • Stopping clip from going back to beginning

    When I watch my video in canvas, instead of stopping at the end of the sequence, it goes back to the very beginning.  I don't know how to turn this off.  I want to keep the playhead at the end, so I can add more video to the sequence.  Thanks

    You don't add 2 video clips in the Canvas.
    You either drag your clips straight from the Browser, Viewer or Canvas into the Timeline.

  • Quicktime Pro audio synchronization problem when recording

    My hardware is an Intel Based Macbook Pro with the latest Quicktime Pro S/W.
    I have just upgraded to Quicktime Pro and I am trying to record video from a DV source (Canon camera acting in AV in/DV out mode). The problem I am experiencing is that the video and audio are out of sync by around 1 second, th sound seems to be in advance of the video.
    Are there any setting which will affect this?
    Has anyone been able to solve a similar problem?

    I don't know what causes the problem, but I can give you a way to solve it:
    Open your DV file with latest version 3.0 of SimpleMovieX and open the tools panel, go to Audio, and resynchronize it.
    The do save, either as mov or reexport as dv format, depending on your workflow.
    Website to download:
    http://www.aeroquartet.com/
    Note: I'm the developer of this app.
    Regards, BJ

  • Bluetooth Audio dropping out when Phone goes into screen lock

    I have a 3G running 3.0 and a Sony Bluetooth audio capable car stereo. The audio streams perfectly via bluetooth until the phone goes into screen lock or "sleep ", at which time the audio starts drooping out. As soon as you slide to unlock the screen everything works fine again.
    Anyone else with this issue ?

    Yup, that's exactly what I've had.
    I paired a Jabra BT3030 BlueTooth stereo headset module to my 3G and it worked perfectly until the screen went off and then the audio could only be heard intermittently. When the screen came back on, audio was perfect again. This was completely repeatable.
    I posted about this the other day, but just prior to that tried again to confirm and I could NOT get it to occur. No matter how many times I put the iPhone to sleep and woke it up, the audio played consistently with NO dropout which is somewhat frustrating and a bit bizarre.
    Looks like there is an issue with A2DP if several of us are experiencing the same problem so bug report/feedback to Apple is required I think.
    Has anyone else had the problem go away next time you try?

  • Audio Sync Problem When Playing on iPod

    I just got my video iPod and have been encoding some .avi's using Xilisoft. When I play the output as a .mp4 it's fine on my laptop, but when I play them on my iPod there's a distinct audio sync lapse that gets worse as the players goes. Many videos also freeze at 1:51 (even though the time indicator shows the whole file time).
    Anyone else having this problem and found any solutions?
    Thanks.

    having problem......................no solusion

  • Crazy little bug: audio inexplicably goes back to beginning

    I imported a video clip from my Canon T3i in the standard .mov format with the audio recorded through a microphone onto the SD card in the camera.
    I play the clip in Quicktime or other programs--no problems.
    However, when I import the clip into Premiere Elements 10 about 2 minutes into the video the audio inexplicably restarts from the beginning. So, of course, everything is out of synch.  Makes no sense.
    I have tried to make a copy of the video clip and re-import that. I have restarted both Elements and my computer. I have tried to create a new project.  I have made sure that the settings are correct--right video and audio settings...
    I am at a loss.  Thanks for any help.

    Did you Copy over the full folder structure from your SD card? You will want to do that, and not just Copy over the media files. PrE (and PrPro) uses some of those other files.
    Good luck,
    Hunt

  • Joining 2 related records using PL SQL in Apex - Problems when there are more than 2 related records?

    Hi
    I am combining 2 related records of legacy data together that make up a marriage record.  I am doing this in APEX using a before header process using the following code below which works well when there are only 2 related records which joins the bride and groom record together on screen in apex.  I have appended a field called principle which is set to 'Y' for the groom and 'N' for the bride to this legacy data
    However there are lots of records where in some instances there are 3, 4 , 5, 6 or even 1 record which causes the PL/SQL in APEX to not return the correct data.  The difference in these related columns is that the name of the bride or groom could be different but it is the same person, its just that from the old system if a person had another name or was formally known as they would create another duplicate record for the marriage with the different name, but the book and entry number is the same as this is unique for each couple who get married.
    How can I adapt the script below so that if there are more than 2 records that match the entry and book values then it will display a message or is there a better possible work around?  Cleaning the data would be not an option as there are thousands of rows of where these occurrences occur
    declare 
         cursor c_mar_principle(b_entry in number, b_book in varchar2) 
         is 
              select DISTINCT  id, forename, surname, marriagedate, entry, book,  formername, principle
              from   MARRIAGES mar 
              where  mar.entry   = b_entry
              and    mar.book = b_book
              order by principle desc, id asc; 
         rec c_mar_principle%rowtype;
    begin 
    open c_mar_principle(:p16_entry,:p16_book)  ;
    fetch c_mar_principle into rec;
    :P16_SURNAME_GROOM   := rec.surname; 
    :P16_FORNAME_GROOM   := rec.forename;
                   :P16_ENTRY := rec.entry; 
                   :P16_BOOK :=rec.book;
    :P16_FORMERNAME :=rec.formername;
    :P16_MARRIAGEDATE :=rec.marriagedate;
    :P16_GROOMID  := rec.id;
    fetch c_mar_principle into rec;
    :P16_SURNAME_BRIDE   := rec.surname; 
    :P16_FORNAME_BRIDE   := rec.forename;
                   :P16_ENTRY := rec.entry; 
                   :P16_BOOK :=rec.book;
    :P16_FORMERNAME :=rec.formername;
    :P16_MARRIAGEDATE :=rec.marriagedate;
    :P16_BRIDEID  := rec.id;
    close c_mar_principle;
    end;

    rambo81 wrote:
    True but that answer is not really helping this situation either?
    It's indisputably true, which is more than can be said for the results of querying this data.
    The data is from an old legacy flat file database that has been exported into a relational database.
    It should have been normalized at the time it was imported.
    Without having to redesign the data model what options do I have in changing the PL/SQL to cater for multiple occurances
    In my professional opinion, none. The actual problem is the data model, so that's what should be changed.

  • Audio Output problem when connected to car port

    Just switched to an iPhone 4 from the 3G model. When I play any audio (music or Pandora)while connected to my car port, I get bits of noise at timed intervals coming throught the speakers. I would say it is about every 2-3 seconds I get this little added noise sample added to the audio stream. My old phone and ipod classic work great so I know it is not the car deck. The headphone mini connector produces clean audio.
    Anyone else have this?
    This in addition to the other problems that seem to be inherent in this new device has me thinking about returning the phone tonight.

    Well it turns out a hard reset of the phone did fix the audio. My car stereo installer told me to do that and it worked!

  • Mac mini bluetooth audio connection stops when paused

    Hello!
    I have a Mac mini late 2012, i5 Version, 2.5Ghz as my home Desktop. The OS is 10.9.5 Mavericks.
    It's connected to a Logilink Bluetooth to 30 pin dock connector adapter, standing on an Apple Dock, connected to my Home Stereo. My Problem is, that everytime i pause the audio on my mini, the bluetooth connection just stops, and if i press play again, it plays through my internal speaker again.
    I temporarily fixed this by playing a 10hour version of a song with 0 volume on itunes, but this shouldn't be a long-time solution.
    I tried it with another bluetooth adapter, another dock, another home stereo. The issue probably is Mavericks, with it's awesome bluetooth settings, connect or don't connect.
    Is there any program out there which sets the connection to permanent? Or is there an other solution?
    Thank you very much in advance!
    (Sorry for poor english. If you don't understand something, i could explain it in german!)

    Ah, no joy, as suspected...I'm using Boot Camp version 4 and all i got was a flash drive full of boot camp version 3.1 - 3.3?  A few firmware upgrades that says it isn't compatible...
    IS THERE ANYONE AT APPLE THAT CAN HELP!!!
    Jesus! I bought this a week ago and I can't even get audio!  If this is the kind of service coming from Apple then I don't know...

  • CS3 audio channel problem when importing to CS5

    I have an HD P2 file-based project which I edited on CS3 which I now need to open in CS5. The P2 footage does not import and I get the following message:
    'The selected file cannot be linked because it has 1 audio channel(s) and the clip has 2 audio channel(s)'
    I tried importing the project instead of opening it and I get the same message.
    I have also tried to offline all the material and see if I can re-link them. Unfortunately I cannot re-link the bin footage as I renamed them all to something meaningful for organisational purposes (eg 'Bill_says_hello' ) as opposed to the rather random naming of P2 files (such as 000R4X.mxf) so I don't know what bin file links with what P2 file, and there are about 2000 of them!
    So either there is a way to view the original names of the bin files so I can match them up, or better still,  another easier way to retrieve them or open them up automatically.
    Without a solution to this, I have just lost months of work so any pointers would be much appreciated.

    Thanks for the suggestion, Simon.
    But finding to the first missing file brings up that message about the number of audio channels available which is still puzzling me, andthen  making me link to them one by one. Not only is it tedious but I know it was stereo before and now it's mono !
    I am sure when we recorded it our excellent sound guy would not made it mono so for some reason CS5 is not recognising the full gamut of sound channels recorded. So I am losing a lot of the sound, which is not good to say the least. I may have to start a new thread as to discover why.

Maybe you are looking for