Audio recording - prompts after every slide?

This question concerns the prompt box that appears after
recording audio for a slide. Basically, if the audio track is
longer than the slide length, you are prompted on how to handle
this after each slide. Is there a universal setting for this so
that we are not prompted after each slide? Or do you have to
increase the slide length before each audio recording to avoid this
issue? Either way, this is a time constraint. Thanks in advance for
any insight you may offer on these topics.

Hi stunamistyle
There is no setting I'm aware of for this. What you see is
what you get.
Cheers... Rick

Similar Messages

Audio recording stops after a few seconds on iPad 1. Any suggestions?, Audio recording stops after a few seconds on iPad 1. Any suggestions?

On an IPad 1 even after a full restart, and only application running, I'm finding that Audio recoding stops after a few seconds. The duration seems to be fairly random between 5 seconds to 25 seconds. Creating other tracks seems OK.
Any ideas would be appreciated.

I've seen this issue in the past. I think it is connected to the operating system itself. I say this because I reinstalled the os using itunes and then restored a backup. Then garageband started behaving again. Then the issue came back - after I did an os update. So I'd try reverting back to a fresh version of the latest os, and then restoring your apps using a backup.
Hope it helps
@zorin

Audio Recording automatically stop every 5 minutes

Hi there,
I use Torch 9810 to record conversation (client meeting) , once I press "record button" it works fine but recording automatically stop every 5 minutes, e.g. if meeting last 1 hour I will have to press "record" button 12 times (every 5 minutes). So annoying!!!
Does anyone know if it is possible to disable this constraint (5 minutes) in 9810?
Thanks in advance
Lee

Hey unixlee,
Welcome to the BlackBerry® Support Community Forums.
Voice notes that are recorded to a media card can be recorded up to 60 minutes. Please have a look at the following article that covers the Maximum recording length in the Voice Notes application:
http://btsc.webapps.blackberry.com/btsc/KB21337
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Audio Recording: Different Volume in Slide Preview vs Published Project. Thoughts?

I use Captivate 6 and use a external NADY USB microphone to record my narration.
I record audio for each slide separately using Captivate's "Record Audio to Slide" function.
When I preview the slide in Captivate, the sound level is fine. Meaning I can hear the audio when the volume on my speakers are at the halfway point.
But when I publish the video, and watch it on my computer, or on YouTube, I have to put the volume all the way up in order to hear the narration.
Any thougths on what I may be doing wrong?
Is my system too old or not powerful enough to support publishing audio/video?
I understand that I may have to play with the sound levels to get the right sound to begin with. However, I don't understand why audio preview (both in slide preview and in "edit audio" player) is at one volume level, and publish is another volume level.
Captivate Settings:
My audio settings are set to Near CD Bitrate (96k)
I calibrate the microphone each time I use Captivate.
I publish to MP4 Video using the YouTube XGA present
All files reside on my C: drive. I do not use the network to store, run or backup files.
My system is:
Windows 7
Processor: Intel Core 2 CPU 4300 @ 180GHz
4 GB Ram
64 Bit OS
Sound: SoundMAX integrated Digital HD Audio
Microphone: NADY USB Microphone
Drivers for Microphone and Sound card are up to date

Hi Vikas.
I tested recording audio with one slide. The published version did not appear softer when recording just one slide.
I then created a new project.
I got the same softer audio when publishing.
I also had 4 slides which cut of the first second of audio. (I made sure to move the audio about .25 seconds from the beginning of each slide, so there was blank space before and after the audio.)
One slide didnt publish the audio at all.
This project was smaller than my first.
This project consists of 23 slides. most with audio.
This time, I did all recoring via: Automatic demo,( no panning).
I did not use the "video demo" function.
What can be done to publish projects with audio successfully in Captivate 6.0.1.240?

Reinstalling Audio drivers after every reboot

Hi,
I have a P750 PSAY3A-02J001 which i gor in australia.
Recently I had to buy a new hard drive (as the old was scratched) and have windows 7 reinstalled. This was done in England.
After this I then restored from my external Hard drive.
After this restore i saw a lot of icons shaped like a clamp which all seemed to refer to specific Toshiba settings. I have opened and installed all of these and they appear to be working okay except for the Audio drivers.
After every reboot I have no sound when playing movies etc and have to reinstall the drivers again.
I have saved the folder on my desktop (for ease to reinstall every time) however Im wondering if the Laptop is not starting up this driver or its being saved in the wrong spot? any way to fix this?
Also I was attempting to use the Toshiba doanloads section to update everything however under my Model P750 there is no PSAY3A-02J001 (my model doesnt seem to exsist?)
Many thanks in advance

Satellite P750/02J (PSAY3A-02J001)
You didn't find your machine listed here because this site is only for US computers.
Downloads for your Aussie model are here.
After this I then restored from my external Hard drive.
Please tell us all about that backup image. Exactly which application are you using?
After this restore i saw a lot of icons shaped like a clamp which all seemed to refer to specific Toshiba settings. I have opened and installed all of these and they appear to be working okay except for the Audio drivers.
What is the make and specific model of the new hard drive? If it uses advanced-format technology, that may be the source of the trouble.
-Jerry

Recording audio level in Sound control panel resets after each slide

This has been a HUGE problem for me ever since I went from Windows XP to Windows 7 and Captivate 5.5. Basically, the sound was not recording loudly enough no matter what I did. So, I checked the Sound Control Panel and the Level was down to 12. Of course, I adjusted it to 100. It would stay at 100 for just one recording. As soon as I hit the red recording button a second time, Captivate readjusts it back down to 12.
Now, you might think that this has something to do with my hardware device. Think again. I tried numerous hardware devices -- it did not matter which device I used -- the problem remained the same. You might also think that it is not a Captivate problem, but how do you explain that the problem does not exist when I record audio in any other program -- Lectora, Articulate, Windows Audio recorder? It ONLY occurs with Captivate.
So, I finally got an Adobe Support person on the phone ... somewhere way down in TIMBUCKTOO -- of course! And of course, he could not help me or explain why this is happening and tried to blame it on anything except Captivate. This has added 6-7 keystrokes to every slide I have to record.... and drastically impacted productivity.
Is anybody listening out there? Because I'm pulling my hair out and ready to dump Captivate!

I'm posting specs on my machine. If there are any settings I left out, please let me know where to go to find further information. I'm assuming my audio/sound devices may be of interest here:

Music glitch after every 99th slide

After creating a slideshow with music in iDVD, during playback there is a major glitch in the music after every 99th image is shown.
Any ideas on what causes this and how to prevent it?

iDvd treats images as chapters in slideshows. Many set top dvd players can't understand anything beyond 99 chapters and they often drop the audio at this point which is what you might be experiencing here. Suggest you use 99 or less slides per slideshow.
http://www.lqgraphics.com/software/phototomovie.php
http://www.boinx.com/fotomagico/overview/
Quoting F Shippey:
There are inherent problems in iDVD created slideshows because each slide is treated as a Chapter and a slideshow is a Track. The DVD spec limits Tracks to 99 Chapters and up to iDVD 6, slideshows were limited to 99 images. Starting with iDVD 6, Apple created something of a 'hack' that linked together Tracks making slideshows or more than 99 images possible. The problem is, many/most set top DVD don't like the 'hack' and pause/quit/drop audio after 99 images. Some set top DVD players even drop the audio with each transition.
The ONLY sure way to create a slideshow with audio that will run with no problems is to create it as a movie in iPhoto or iMovie (or Photo to Movie or FotoMagico (which I use)).
F Shippey
http://discussions.apple.com/thread.jspa?messageID=5193844&#5193844
Message was edited by: SDMacuser

Audio Recording to Slide Freezes Captivate

I am hoping somebody can help me with this. I am a relatively new user to Captivate so I sure that I am missing something obvious.
I am running Captivate 5 on a Windows 7 machine and would like to record audio to a slide. I create a Blank Slide Project and go to Audio > Record To > Slide. Captivate freezes every time! Please help me to see what I am missing.
I have imported both Background and Slide audio and been able to edit it but I would like to record directly into my project.
Any help is GREATLY appreciated!

sorry I am having same issues and are getting no response

I do not want the learner to be able to click through the project until they hear the audio recorded on each slide, however I also would like them to have click to advance to the next slide. Is there a way to set up these 2 functions together?

I do not want the learner to be able to click through the project until they hear the audio recorded on each slide, however I also would like them to have click to advance to the next slide. Is there a way to set up these 2 functions together?

I don't like that approach for adult learners, cannot refrain from mentioning that.
Don't use a playbar but create custom navigation. You'll need a next button on each slide that appears after the audio (in timeline). Since slides will not all have the same duration you'll need an individual button per slide, a shape button on master slide or timed for the rest of the project will not be possible.

Commit in procedures after every 100000 records possible?

Hi All,
I am using an ODI procedure to insert data into a table.
I checked that in the ODI procedure there is an option of selecting transaction and setting the commit option as 'Commit after every 1000 records'.
Since the record count to be inserted is 38489152, I would like to know is this option configurable.
Can i ensure that commits are made at a logical step of 100000 instead of 1000 records?
Thank You.
Prerna

recently added on this
http://dwteam.in/commit-interval-in-odi/
Thanks
Bhabani
http://dwteam.in

Commit after every 1000 records

Hi dears ,
i have to update or insert arround 1 lakhs records every day incremental basis,
while doing it , after completing all the records commit happens, In case some problem in between all my processed records are getting rollbacked,
I need to commit it after every frequency of records say 1000 records.
Any one know how to do it??
Thanks in advance
Regards
Raja

Raja,
There is an option in the configuration of a mapping in which you can set the Commit Frequency. The Commit Frequency only applies to non-bulk mode mappings. Bulk mode mappings commit according the bulk size (which is also an configuration setting of the mapping).
When you set the Default Operating Mode to row based and Bulk Processing Code to false, Warehouse Builder uses the Commit Frequency parameter when executing the package. Warehouse Builder commits data to the database after processing the number of rows specified in this parameter.
If you set Bulk Processing Code to true, set the Commit Frequency equal to the Bulk Size. If the two values are different, Bulk Size overrides the commit frequency and Warehouse Builder implicitly performs a commit for every bulk size.
Regards,
Ilona

ResultSet "hangs" after every 10 records

Hi
Please could you somebody help me.
I have extracted a ResultSet from a database which contains between 100 and 200 records (5 field each).
If I call rset.next(), printing a count after each call my program hangs for about 2 minutes after every 10 records.
For example:
int count = 0;
while(rset.next()) {
System.out.println("" + ++count);
Prints:
1
2
3
4
5
6
7
8
9
10
Waits here for two minutes and then carries on
11
20
Waits again for 2 minutes etc.
Has anyone had this problem or does anyone know how to fix it?
FYI: prstat reports tiny CPU and memory usage so the hardware is not responsible.
Thanks a lot in advance

Hi All
It must be network - setFetchSize is unsupported in both Statement and ResultSet in the driver set I am using.
It is running through a 10baseT switch at the moment which may be the problem so I will stick it on the backbone and try again.
Thanks again for your help.

Need to commit after every 10 000 records inserted ?

What would be the best way to Commit after every 10 000 records inserted from one table to the other using the following script :
DECLARE
l_max_repa_id x_received_p.repa_id%TYPE;
l_max_rept_id x_received_p_trans.rept_id%TYPE;
BEGIN
SELECT MAX (repa_id)
INTO l_max_repa_id
FROM x_received_p
WHERE repa_modifieddate <= ADD_MONTHS (SYSDATE, -6);
SELECT MAX (rept_id)
INTO l_max_rept_id
FROM x_received_p_trans
WHERE rept_repa_id = l_max_repa_id;
INSERT INTO x_p_requests_arch
SELECT *
FROM x_p_requests
WHERE pare_repa_id <= l_max_rept_id;
DELETE FROM x__requests
WHERE pare_repa_id <= l_max_rept_id;

1006377 wrote:
we are moving between 5 and 10 million records from the one table to the other table and it takes forever.
Please could you provide me with a script just to commit after every x amount of records ? :)I concur with the other responses.
Committing every N records will slow down the process, not speed it up.
The fastest way to move your data (and 10 million rows is nothing, we do those sorts of volumes frequently ourselves) is to use a single SQL statement to do an INSERT ... SELECT ... statement (or a CREATE TABLE ... AS SELECT ... statement as appropriate).
If those SQL statements are running slowly then you need to look at what's causing the performance issue of the SELECT statement, and tackle that issue, which may be a case of simply getting the database statistics up to date, or applying a new index to a table etc. or re-writing the select statement to tackle the query in a different way.
So, deal with the cause of the performance issue, don't try and fudge your way around it, which will only create further problems.

Total after every 25 records

Dear Friiends,
I would like to write down query which also returns the total of some columns after every 25 records.
like this
ccno salary
1 5000
2 10000
25 80000
total       <total of above 25>
26 25000
27 10000
50 13000
total       <total of above 50>
can we achieve this
Waiting for reply .

with tab as (
select 1 ccno,100 salary from dual union all
select 2 ccno,200 salary from dual union all
select 3 ccno,300 salary from dual union all
select 4 ccno,400 salary from dual union all
select 5 ccno,500 salary from dual union all
select 6 ccno,600 salary from dual union all
select 7 ccno,700 salary from dual
)--end of test data
select ccno,
       salary,
       case when mod(row_number() over (order by ccno), 3) = 0 then sum(salary) over (order by ccno) else null end as sumsal
from tab
CCNO                   SALARY                 SUMSAL
1                      100
2                      200
3                      300                    600
4                      400
5                      500
6                      600                    2100
7                      700
7 rows selectedChange the 3 in the mod to 25 for your data

Why am i getting error -43 after mix down on audio recording?

why am i getting error -43 after mix down on audio recording?

to where are you trying to mix down the file? a -43 is a file not found error

Audio recording - prompts after every slide?

Similar Messages

Maybe you are looking for