Audio recording, saving and playback on the fly

i m new to this.
Using the flash media server, Is possible for user to record
an audio on the fly, save it in the server and playback at later
time.
What formal will the audio be saved as..
thx in advance
Angel

thx. that's really useful..
Yes the client side is a flashplayer 10.
So does that means .flv is the only format we can save it as?
Not .mp3 or anything else?
And the user can later retrieve it from our server and
playback anytime?
There are a few flash media servers. I'll just have to get
the "Flash interactive media server" only?
thx
Angel

Similar Messages

  • Why do I keep losing audio/recorded tracks and SFX in my projects? I have tried: Saving as archive file/searching package contents etc. to no avail. Can anyone help?

    Why do I keep losing audio/recorded tracks and SFX in my projects? I have tried: Saving as archive file/searching package contents etc. to no avail. Can anyone help? It keeps telling me 'Audio file not found', and seems to be different tracks in the same project each time too.

    iamthewaughrus wrote:
    I also have this problem using Garageband in a school network situation when students open their project on one station, save it to their network drive, and later open it at a different station.  90% of the time there will be no issue, but sometimes audio files are lost. (Garageband '11, iMacs)
    That sounds like it might be a failure of the students to perform a Save As and check Archive Project when they do. This asks GB to pull all the files it needs into the associated .band document rather than point to them externally (and then risk not having them be there).

  • Pe10: opening a previously saved and rendered project, the work area indicates non-rendered sections

    Pe10: when I open a previously saved and rendered project, the work area indicates a majority of non-rendered sections.
    When I open a previously saved and rendered project, the work area indicates non-rendered sections. My project is approximately 59 minutes and 27 seconds.
    What must be done to have a saved and rendered project, when open again, be rendered?

    TRUE_SEEKER wrote:
    The price tag of $245 for the Prodad's Mercalli  video software is too steep for me right now.
    Corel's Avid VideoStudio Pro X4 Ultimate (what a mouthful) includes Mercalli SE. It was on sale at half-price on Amazon Black Friday and I missed it - mostly because I was trying to find out what the 'SE' part of it meant.
    Annoyingly (very much so) it seems that Mercalli SE is pretty much the whole deal - a YouTube review of the Mercalli feature in VideoStudio by ProDAD (the Mercalli authors) included all the features I would expect to use.
    So it seems that the $80 VideoStudio product includes the $150 Mercalli plug-in. Thus a workflow starting with Mercalli stabilisation in VideoStudio and then switching to PRE is viable. I can't really afford the full price VideoStudio product so I'm hoping for a similar 50% reduction after Christmas.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Switching BW authorization concept back and forth on the fly

    After upgrading to BW 7.0, we are currently developing the BW authorizations from scratch with the new analytical authorizations. The system is currently set to the legacy RSR authorization objects. The idea is now to define two timeframes on our development system, one for the users working with old authorizations, and a second timeframe for testing the new analytical authorizations.
    Can we switch the authorization concept back and forth on the fly, or are there any obstacles?
    Thanks in advance!

    Andreas,
    The latest version of BW is 7.3 which is also Analysis authorization concept like 7.0. So please clarify from the system status what level are you upgrading to.
    Under 7.0, the RSR objects were still available i.e. you can switch the concept back and forth on the fly, it will trigger a transport. AFAIK - In 7.3 however there is no support for RSR anymore in fact even the object class is not visible and so does the switch for the concept and even RSR objects (Z-objects) do not show up in PFCG either.
    So if you are moving to 7.0 switch is possible, 7.3 it is not. But in either case, you should be upgrading using a dual landscape with upgrade work being done & tested in separate boxes than daily production support landscape. It will come in handy at the time of testing also.
    Regards,
    Shivraj Singh

  • Cropping And Streaming On The Fly

    Hello!
    I'd like to do something but I'm not entirely sure if it's possible. What I would like to do is have a large (probably 720p / 1080p) video, and then on the fly, be able to stream a cropped version of it. Essentially to allow a user to 'zoom' in on a low res video, and then be streamed just the relevant area of a high res video.
    I know that i could probably do this in the client side by just zooming or changing the size of the video view object but this creates the problem of bandwidth and streaming HD...
    I know that in theory it should be possible without re encoding the video because you could just choose the macro blocks that fit within the cropped area and send those. Probably.
    I was wondering if anyone with a little more experience that me would be able to point me in the right direction with this? Is there built in functions for this in flash or would I need to build some kind of extreme low level on the fly encoding system?
    Any help would be greatly appreciated.
    Many thanks
    Jason

     QuickTime Broadcaster would be my first suggestion.
    Check the tutorial linked there or the QuickTime Developer Connection if you need more technical information.
    For more specific help with QuickTime, try searching or posting in the QuickTime Discussions area.
    Jim

  • When I send open office documents to a PC user (even saved and sent in the word format), the document reaches with serious format changes and is rendered unusable to the PC user. How to overcome the problem??

    When I send open office documents to a PC user (even saved and sent in the word format), the document reaches with serious format changes and is rendered unusable to the PC user. How to overcome the problem??

    I don't use OpenOffice (I have it on my internal just to play around with, but seldom even open it). I do use MS Word and have few problems sharing files - it's usually a font issue so I tend to use MS fonts for documents that I know will need to be shared.
    Unless you need to make collaborative changed to the document, you could always save it as a pdf file. With Acrobat Pro you can even save a pdf file to a Word document with very little change in formatting.
    If I were you - and you have a need for .doc or .docx files to travel and play nicely - I'd just invest in MS Office. If you don't have to send a Word file, try pdf.
    Clinton

  • If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

    If I plug a guitar into iPhone GarageBand using an interface, can I still use the built in microphone to record vocals and guitar at the same time?

    Hi John,
    I think the only way is to get an iMic...
    http://www.bhphotovideo.com/bnh/controller/home?O=&sku=797644&is=REG&Q=&A=detail s

  • Oracle Trigger - How can I capture and correct on the fly  ORA-01847

    Oracle Trigger - How can I capture and correct on the fly ORA-01847 day of month must be between 1.
    I have a table that has a date column. Sometimes an invalid date is passed and I'd like to capture and initilize the incoming value to null and have it inserted without error. Currently I get ORA-01847 day of month must be between 1.
    Example:
    create table ep1
    col_1 number,
    col_2 date
    Now if a user does the following, I want no error to occure but rather for the date value to be set to null and inserted.
    insert into ep1 values('1', '41-JAN-13')
    The insert may come from any client and I can't change the calling code hence can't used a precedure to replace the insert. I'm guessing there is some way to catch system level exceptions on the DB level. This doesn't need to be nice, it just needs to work.
    Here is the question on experts exchange. I'm told there is no way, but there must be. After all the exception is on a DB system level and I would think one could extend or override these, or disable them.
    http://www.experts-exchange.com/Database/Oracle/PL_SQL/Q_23045306.html

    SQL> declare
      2     wrong_month      exception;
      3     pragma exception_init (wrong_month, -1843);
      4  begin
      5    begin
      6      insert into emp (empno, hiredate)
      7      values (2345,to_date('13/25/81','MM/DD/YY'));
      8    exception
      9      when wrong_month then
    10      dbms_output.put_line('I caught the bad month');
    11      insert into emp (empno, hiredate)
    12      values (2345,null);
    13    end;
    14  end;
    15  /
    I caught the bad month
    PL/SQL procedure successfully completed.
    SQL>
    SQL> select * from emp
      2  where empno = 2345;
         EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
          2345Note the 1843 error vice 1847. It can be done outside of a trigger.

  • Recording vocals and guitar at the same time, using the Alesis IO dock!

    Hi there!
    I have an Ipad 2 with the newest OS installed etc. And I rea the other posts in here.
    I bought an IO dock from Alesis the other day and was full of exspectations, but I got a bit disappointed -> Garageband! When I bought the Ipad dock I exspected that I would be able to record (or just play and hear the inputsound from two devices) at the same time in my headphones! But I wasn't... Now I'm wondering if this is going to be fixed in an update or not? I think it would be a shame if this issue isnt adressed, due to the huge abilities the Ipad/garageband/Ipad docks withhold.
    So anyone know anything? I went to my musicstore and spent about an hour or so with the tech dude there trying dfferent setups, but unfortunatly without luck! Just to clarify that I didt just plugged in my guitar and got mad that it wasnt apple intuative!
    Hope someone can help :)

    I am wondering if I can record audio and midi at the
    same time in Logic 7 Express. I am running my guitar
    thrugh a Roland GR 33, and a line out and using the
    GR 33 to trigger sounds in the Logic's synth section
    but cant seem to record all three tracks at once. If
    any one knows how let me know. Oh and I am running
    the GR Synth and Guitar into the Prosonus Fire Fox
    and have the GR 33 out midi to the Fire Box as well.
    So I guss the question is how do I sent up two audo
    tracks and one midi track to record in real time.
    Thanks Victor
    Try arming the audio tracks, select one of the tracks, then while holding down the shift key, select the midi track you want to record, arming the "r" on the midi track. Press "record".....
    HL

  • No Audio when imported and played on the timeline

    I imported with a panasonic DVM100B using a canopus ADVC-100 and RCA cables I have ordered a 9pin to 4pin firewire.. The capture files plays video and audio from Quick Time and will play when put in iMovie. The audio will not play when imported into Final Cut Studio HD upgrade and placed on the timeline. The Audio track shows peaks when open and the audio meter shows movement when playing the track.
    Any suggestions

    Thanks for the info. I went back to the audio and video settings and the audio output and playback is now on default. It is working except I had to render all imported files.

  • Audio recording "failed," need to rescue the AIFF file

    I recorded a rather long audio file from the analog audio-in port of my Dual G5 in AIFF format (stereo, 16 bits) using the QuickTime Player. Upon clicking the "Stop Recording" button I got a message dialog "Recording Failed". I copied the file with the Finder before clicking OK, suspecting that QuickTime would delete the file upon clicking OK, which it did do. The copied file is 10.28 GB and contains 11 hr, 35 min, 2 sec of recorded material. Quicktime refuses to open the file, giving me the following message: Alert: QuickTime cannot open the file: "Audio 2 copy.mov" the movie contains an incorrect duration (-2014).
    Note that VLC opens the file, knows the exact duration of the audio tracks, and plays it back perfectly fine. I can even jump to different time points to continue playing.
    Is there a utility I can use to "repair" the file, so that QuickTime can open it? I hate to discard this file, since it is mostly intact.
    Dual 1.8 GHz PowerPC G5   Mac OS X (10.4.6)   3.5 GB DDR SDRAM

    Is this dotmac.info bob?
    MPEG Streamclip (free) may be able to repair the broken time code.
    You could also re-record the file using WireTap. Record while playing the file in VLC. Note: This is "live" recording so it would take a long time. Maybe record in smaller "chunks".

  • To Record Guitar and more with the Fatal1ty

    I realize the X-fi Elite Pro is the one to go for for audio recording, but how is the Fatal1ty? Can I run a guitar directly into it out from an amp or pedal into the front of the hardware.
    I see a bunch of bigger jacks on the hardware that I can plug into, are those inputs for a guitar sized cord and would I simply plug into one of those and go from there?
    Where does the hardware go, I have 2 CD-Rom drives, one is never used, so would it fit into the space of the un-used drive?

    Can the mixer be a software one, or is it best to run the guitar to the amp out to a mixer then to the PC?
    My boss uses this to record audio of her speaking: http://www.musiciansfriend.com/srs7/...se_pid/484020/
    Could I run my guitar through that as well?
    Or would I be better off getting something like this for both mic and guitar and other instruments:
    http://www.musiciansfriend.com/srs7/...se_pid/631238/

  • Reading MS Project column names and data on the fly from a selected View

    Hi guys,
    I have several views on my project file (MSPROJECT 2010) and I want to build a macro so that;
    1. User can select any view ( Views can have diffrent columns and the user may add new columns as well)
    2. User runs the Macro and all the coulmns along with the tasks displayed in the view will be written to a excel file. ( I don't want to build several macro's for each view, I'm thinking of a common method which would work for any selected view)
    The problem I'm facing is that how will i read the column names and data for a particular view on the fly without hard coding them inside the vba code ?
    The solution needs to work on a master schedule as well.
    Appreciate your feedback.

    Just to get you started the following code writes the field name and data for the active task to the Immediate window.
    Sub CopyData()
    Dim fld As TableField
    For Each fld In ActiveProject.TaskTables(ActiveProject.CurrentTable).TableFields
    If fld.Field >= 0 Then
    Debug.Print Application.FieldConstantToFieldName(fld.Field), ActiveCell.Task.GetField(fld.Field)
    End If
    Next fld
    End Sub
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

  • Losing Title Bar when changing Look and Feel on the fly

    Hello,
    I have an option in my Swing app for the user to change the Look & Feel on the fly by selecting from a radio button list. The look and feel is changed when the user make the selection, however the Windows Title Bar disappears. Any ideas what I'm missing?
    private void setLook(String mode)
    String lookAndFeelClassName = null;
    UIManager.LookAndFeelInfo looks[] = UIManager.getInstalledLookAndFeels();
    for (int i = 0; i < looks.length; i++)
    if (mode.equalsIgnoreCase(looks.getName()))
    lookAndFeelClassName = looks[i].getClassName();
    break;
    try
    m_view.dispose();
    UIManager.setLookAndFeel(lookAndFeelClassName);
    SwingUtilities.updateComponentTreeUI(m_view);
    m_view.setVisible(true);
    catch (Exception e)
    JOptionPane.showMessageDialog(m_view, "Can't change look and feel:" + lookAndFeelClassName, "Invalid PLAF", JOptionPane.ERROR_MESSAGE);

    You are disposing the view. My guess is that this is your problem. Try creating a new one instead of just showing the old disposed one

  • I need an app that allows - top notch Powerpoint accessibility.  Notetaking and audio recording.  AND a possible translator.  Is there any appl or two that are recommended for a busy traveling executive?

    My boss just purchased and IPad and needs an app that allows -
    Powerpoint Editing and graphics capability/accessibility. 
    Notetaking and audio recording. 
    Japanese Translator.
    Is there any appl or two that are recommended for this busy traveling executive?
    Mahalo Nui Loa!

    dmkimball wrote:
    Japanese Translator.
    Have a look at
    http://itunes.apple.com/us/app/google-translate/id414706506?mt=8

Maybe you are looking for