Audio Redirection and Remote Desktop Web Access

I recently deployed a 2012r2 Remote Desktop solution. I have a collection published for remote desktop sessions and have configured it to allow all redirection shown in the interface. However when users connect through Web Access, they do not get audio recording
redirection.
Is there a way to enable this through Remote Desktop Web Access?

Hi,
Glad to hear that it is up now. Please keep us informed when the issue is resolved.
Best Regards.
Jeremy Wu
TechNet Community Support

Similar Messages

Using remote desktop web access (RDWEB) with remoteapps and a traditional remote desktop

I configured windows 2012 r2 remote desktop services and remote desktop web access (rdweb) and was able to click the icon on the rdweb page to log on to a remote desktop session. When I published a remoteapp program, the remote desktop icon went away. How
do I get it back? Do I need to publish remote desktop as a remoteapp so users can both use remote apps and log on to a traditional remote desktop session?
thanks in advance for the help

Hi,
You can just publish RDC as RemoteApp and then can connect to the desired remote desktop connection. You can check the below snap.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 8.1 pro Remote App crashes connecting to 2012 Remote Desktop Web Access published application

Using 2012 Remote Desktop Web access to gain access to published applications. The workstation was a Windows 8.1 (home) upgraded to Windows 8.1 Pro with the Media Center add on. Launching the url to the login page for the RDW works fine. When the app is
clicked on to launch the Remote App crashes. How do I get it to properly connect. Other Windows 8.1 pro workstations work. Although none were upgraded from the 8.1 (home) Here is the event.
Faulting application name: mstsc.exe, version: 6.3.9600.16384, time stamp: 0x5215e2b5
Faulting module name: ntdll.dll, version: 6.3.9600.17031, time stamp: 0x530895af
Exception code: 0xc0000005
Fault offset: 0x0000000000065e8e
Faulting process id: 0xab4
Faulting application start time: 0x01cf5f2ed029e83f
Faulting application path: C:\Windows\System32\mstsc.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 21a471d6-cb22-11e3-8263-a0886933dd25
Faulting package full name:
Faulting package-relative application ID:

More info.
The computer is brand new HP.
Windows 8.1 pro with media center
processor Intel i7-4700mq - 12gig ram -64bit
Full windows touch support with 10 touch points
The computer is connecting to a 2012 Server hosted on Microsoft's Azure platform. Trying to access applications hosted by this server with Remote Desktop Web services. The computer can RDP using just the mstsc.exe to other computers and to the server with
no problem.
The computer presents the following msg box Body: Remote Desktop Connection has stopped working. I have tried the following to resolve this and narrow the scope:
-Created a new user account for the computer with admin rights, rebooted and logged in as the new user.
-Tried a different user account for the portal, that does work. The user does not show up as connected.
-All MS updates were loaded.
-Added these changes to the registry to keep alive the connection: HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Gateway\Transports\Rpc-----HttpKeepAliveTimeout=dword:00000001
And HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client----RDGClientTransport=dword:00000001
Loaded this update http://support.microsoft.com/kb/2919394/EN-US
-Removed all printers
-Removed Antivirus
-Added the server to HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default
-Disabled everything in MSCONFIG startup
-Ran sfc /scannow as administrator - no integrity violations
Any suggestions?

Windows 2008 R2 + Remote Desktop Web Access + Single Sign-On + 2 servers

Hi
First sorry for my English. I have got problem with run SSO with RDWeb. I configured everything follow this instructions: http://blogs.msdn.com/b/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx
and http://blogs.technet.com/b/mrsnrub/archive/2010/03/22/remote-desktop-services-websso.aspx. After logon to RDWeb web page I click application icon. Then I see dialog box for credentials - SSO not working.
I have got 2 servers with Windows Server 2008 R2 Standard:
Server OL-AP1 with role Remote Desktop Session Host (RDSH) and certificate for digital sign RemoteApps
Server OL-AP04 with ONLY Remote Desktop Web Access (RD Web) with certificate for https
Client PC: Windows 7 SP1 with installing certificate for OL-AP01 witch I used for digital sign RemoteApps
All certificates created by enterprise domain CA - Active Directory Certificate Services (AD CS)

Hi,
Thank you for posting in Windows Server Forum.
Do you have RD Gateway setup in your environment?
Have you configure RD Connection Broker and set the Fully Qualified Domain Name (FQDN) of the RD Connection Broker server in case of RD Connection Broker mode. In RD Session mode, it is set to the FQDN of the RD Web Access server.
Client operating systems must trust the certificate with which the RemoteApp programs are signed. Suggest to install RDP 8.1 for client OS.
Do you have a trusted certificate with a matching name configured on your RDSH server in RD Session Host Configuration? (Means cert must match the name that clients use to connect to it for running the RemoteApp).
Hope it helps!
Thanks.
Dharmesh Solanki

Remote Desktop Web Access Administration not in menu

I am trying to figure out why RemoteApp is working and Remote Desktop connection isn't on my very simple installation. One thing I came across is that something seems to be missing from my Remote Desktop Services menu. According to the TechNet article at https://technet.microsoft.com/en-us/library/ee891009(WS.10).aspx
if I should be able to access RD Web administration by following these instructions:
On the RD Web Access server, click Start, point to Administrative Tools, point to Remote Desktop Services, and then click Remote Desktop Web Access Administration.
But when I go there I find that there is no Remote Desktop Web Access Administration. Any ideas on why it doesn't exist?

Yes, that's the OS I'm using. Those settings are set properly as far as I know. Since this is all on one server, the DC (very small office that can't justify second server), I'm not using an RD Connection Broker so it's set to the RemoteApp sources and
the Source name is the internal FQDN of the server. servername.domain.local. The weird thing is that when I log in via RD Web the RemoteApps Programs tab has a Remote Desktop icon that successfully connects me to the server but the Remote Desktop tab always
fails, telling me it can't connect to the computer.

Connecting to Remote Desktop using proxy and Remote Desktop Gateway?

I have setup a Remote Desktop Gateway server using Windows Server 2012 R2. I am using the Remote Desktop Gateway as an intermediary between to provide the remote desktop session over 443 since 3389 is blocked at many client locations.
However, I ran into a problem with a client who's using a web proxy.
Is is possible to configure Remote Desktop to connect via web proxy? If so, how? If not does any one have any suggestions on how to provide a Remote Desktop session via 443 over proxy for situations where you don't control the client's PC or network? Does RemoteApps
allow for access via web proxy when using RD Gateway?
The error message is below:
Your computer can't connect to the remote computer because the web proxy server requires authentication. To allow unauthenticated traffic to an RD Gateway server through your web proxy server, contact your network administrator.
Thanks for any help!

Hi,
My suggestion is to setup a RD Web Access server and make it available for your clients via proxy.
Remote Desktop Web Access (RD Web Access)
http://technet.microsoft.com/en-us/library/cc731923.aspx
Thanks.
Jeremy Wu
TechNet Community Support

I have updated to ios 7 and Microsoft outlook web access for work emails no longer works nor my remote access can you help

I have updated to ios 7 and Microsoft outlook web access for work emails no longer works nor my remote access can you help

This happened to me as well. I read somewhere else that resetting the network settings (General, Reset, Reset Network Settings) would help and it partially did. I get half (the folders) of the Web Access screen rather than a blank screen. I tried tihs a few more times and got the right half (the messages) on occasion but never the whole web page.

WRT54GL not allowing Remote Desktop Web Connection

Im currently using a WRT54GL in a network with just two computer. Computer A is using a wired connection and Computer B is wireless with a Linksys adapter. Public IP address from ISP is a static IP address and all is setup in the router allowing both computers internet access with no problems. Both computers are setup with static IP. Computer A is 192.168.1.101. Computer B is 192.168.1.103. Both computers are installed with Internet Information Services.
1) Setting Up The Two Computers: I setup Computer A for port 50001, ie. I opened Control Panel, clicked Performance & Maint., Clicked Admin Tools, Double clicked IIS. Expanded Websites, right clicked Default Website and clicked on Properties. On the Website tab, I changed the value of the TCP port to the one above, 50001. I Opened the Properties Window of My Computer and clicked to the Remote tab. I placed a green Check into where it states, [Allow users to connect remotely to this computer]. On side note, I have admin rights to the computer so I did not click to [Select Remote Users]. I then accessed the Windows Firewall Settings, In the Exception Tab, I have Remote Desktop with a Check - Set with TCP 3389. I also added new port - game it Name: Remote Access, Port:50001. Settings were all saved. (I did all the same exact steps for Computer B, but the only difference is I used for 50002 instead)
2) Setting up the router: I access the router configuration with IP 192.168.1.1 Clicked to the Applications and Gaming. Selected [Port Range Forward]. Below where it tells to enter the ports and name for each port I entered for the first port. Application: FM-HS01, Start and End Ports: 50001 to 50001, Protocol: TCP, IP Address: 192.168.1.101, Enabled: {checked}. I again setup another below that for Computer B. FM-HS02, 50002 to 50002, TCP, 192.168.1.103, Enabled: {Checked}. I then clicked to Port Triggering screen. Under Application: [Remote Access], Trigger Range Start - End: [50001 to 50002], Forwarded Range Start - End: [3389 to 3389], Enabled [Checked]
Under the Security Tab for Firewall - I unchecked {Block Anonymous Internet Requests}, but have {Filter Multicast}, {Filter Internet NAT Redirection} , {Filter IDENT(Port 113)} all checked.
I also enabled remote access to router using default port 8080.
By using the ISP Static IP: ie http://64.193.93.46:8080/, I am able to access the router config page no problems. Problem is trying to access each Computer A and B. For Example: in IE address bar, I entered http://64.193.93.46:50001/ I get page stating Under Construction. Now if I try http://64.193.93.46:50001/tsweb/ I actually get the Microsoft Windows Remote Desktop Web Connection screen stating to enter Server __________ Size: and Connection Button. I enter the Computer Name for Computer A: FM-HS01, Choose the appropriate size and clicked connect. Page loads then all I see is an outline of a box where I assume the remote computer's screen should show. A message appears after trying to load stating: "
Remote Desktop can’t find the computer “FM-HS01”. This might mean that “FM-HS01” does not belong to the specified network. Verify the computer name and domain that you are trying to connect to."
This is where I have been ending up at. I have not able to get pass this part. Any Help Please??? I am not sure is there are other ports I would need to open along with the ones I have specified above. On another side note, my Antivirus software for both computers are CA eTrust AntiVirus which I have also configured for both computers.

Just change the ports to what ever you think of and be sure to make the right single port forwards (if you put comp A to 50001, make *.*.*.101:50001 forward and so on). Just be sure you are not running anything else on the same port, on the same computer (for excample the IIS terminal server client application). And from outside you just connect the remote desktop client to your external iport_number ie use the comp_ip:50001 for comp A in the client program connection window (not http:// in browser).
- who stole my beer? -

HT1338 can apple remote desktop 3 access my pc work desktop?

can apple remote desktop 3 access my pc work desktop? Do I have to get microsoft office 2011 in order to do this?

Microsoft Remote Desktop Connection Mac OS X Client (free)
<http://www.microsoft.com/mac/products/remote-desktop/default.mspx]]>
Applications -> Remote Desktop Connection
Computer: windows.pc.address
-OR-
Computer: windows.pc.address/console
Microsoft provides setup instructions on the web page where you download the RDC client.
-OR-
CoRD (Microsoft RDC Screen Sharing)
<http://www.macupdate.com/info.php/id/22770/cord>
-OR-
You could also install a VNC server on your Windows system and use a VNC client on your Mac

Hp laserjet pro m1217nfw and remote desktop printing

hp laserjet pro m1217nfw and remote desktop printing, is there any issues with said function?

whats the problerm you are having??

Remote control and remote desktop client in sccm 2012 ?

What is the difference between remote control and remote desktop client in sccm 2012 ?

Remote Control is a built-in feature for SCCM 2012 and uses the RPC protocol. When you use this, the user can still be logged on while helping.
Remote Desktop is a buit-in feature for Windows and uses the RDP protcol. When you use it, the user will be logged off.
Why you would use one over the other depends on your requirements.
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

Access Anywhere VPN and Remote Desktop

I have a recently installed Win 2012 Essentials server. I have VPN, Remote Web Access, enabled. I can use Remote Web Access and login to see my remote desktops and drives, but VPN is not working. Both are enabled. I'm not able to
use the wizard to config but my firewall has 443 open. My clients say they can't see the server when disconnected from the local network.
The VPN connects but says it can access the server.
Not sure where to look.
Kevin

Hi Kevin,
Based on your description, it seems that Remote Web Access ran as normal. Would you please let me know whether
get any error message when configure Anywhere Access?
Please click Setting option in Dashboard. Navigate to Anywhere Access tab in Settings panel and click ‘Repair…’
button. Then check if find some relevant clues.
In addition, please refer to following article and check if can help you.
Manage VPN in Windows Server Essentials
Meanwhile, please follow the path: C:\ProgramData\Microsoft\Windows Server\Logs and check relevant log file
if find relevant clues.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Can iPads and Smartphones Access Remote Desktop Through "Access Anywhere" RDWeb?

Is Remote Desktop Gateway required to log into a Windows 7 workstation remotely or can you connect from a mobile device using only the "Acess Anywhere" features built into Essentials Sever 2012 R2 using the Microsoft Remote Desktop App in downloaded
from the app store?

Hi,
Thank you for posting in Windows Server Forum.
Yeah we can access RD Web by using MRD for MAC, IOS and Android. Just we need to install the application on respective device and can access by Remote Resource. Please follow TechNet article where you can find the details.
Microsoft Remote Desktop Clients
http://technet.microsoft.com/en-us/library/dn473009.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Remote Desktop Web Applicaiton Access CAL

Hi,
We have applications which we are using with cirtix to generate remote session... now we planed to use RDweb access and we have implemented in test environment with 90 day's trial....
Total we have 15 users who is going to access this application rdweb... which and how many cal we need ?

Hi Rashid,
Thank you for posting in Windows Server Forum.
First of all I would like to provide you some idea regarding RDS CAL.
1. User CAL :
A User CAL allows a single unique physical user to access Microsoft server software from many devices, such as a work computer, a home computer, a laptop or a personal digital assistant (PDA), without having to acquire CALs for each device.
2. Device CAL:
A Device CAL allows any number of physical users to access Microsoft server software through a single device.
Remote Desktop Services Client Access Licenses (RDS CALs)
For your case, if your limited user only need to access the web then you can purchase 15 User CAL. But just take care that after purchasing CAL and before installing. You need to activate the License Server and then you can able to install the CAL.
For more information, refer beneath article.
1. Install and issue RDS CALs or TS CALs
2. Track the Issuance of Remote Desktop Services per User Client Access Licenses
Hope it helps!
Thanks,
Dharmesh

Minimum services to run remote desktop web connection?

While I recognize that installing anything to do with terminal services or RDS on a domain controller is not recommended it is my only choice for a very small business that I'm helping out. They have Server 2008 R2 and all they want to be able to do is
have a couple of people remote in to their own computers when out of the office. What services are the simplest way to accomplish this? I can't find an answer to something this minimalist anywhere.

Hi Jim,
For your issue regarding double prompt, suggest you to enable RD Web SSO for your case; where we need to enter username and password once. In order for Web SSO to work:
a. The connection in RemoteApp and Desktop Connections must have an ID. By default, it is set to the Fully Qualified Domain Name (FQDN) of the RD Connection Broker server in case of RD Connection Broker mode. In RD Session mode, it is set to the FQDN of
the RD Web Access server.
b. RemoteApp programs must be digitally signed using a Server Authentication certificate [Secure Sockets Layer (SSL) certificate].
c. Client operating systems must trust the certificate with which the RemoteApp programs are signed.
You can refer the following article for information.
Introducing Web Single Sign-On for RemoteApp and Desktop Connections
http://blogs.msdn.com/b/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx
In regards to your error, we need to have required port open to make successful connection. Need to bind port 443 for RD Web and RD Gateway successful connection. Also need to have proper certificate.
Addition something might have happened to your IIS settings and more specifically to your Default Application pool. For example if you install some third-party web application, it may have changed the 32/64 bit feature on your Application pool. So please check
below points.
1) Go to IIS -> Application Pools -> DefaultAppPool -> Advanced Settings -> Enalbe 32-Bit Application - > if it's True , change it to False
2) Check other relevant application pools for the same setting - > SBS Web Workplace AppPool or SBS Web Applications application pool
All of the pools should run with Enable 32-Bit - False
More information.
This computer can't connect to the remote computer because the Terminal Services Gateway server is temporarily unavailable
https://support.microsoft.com/en-us/kb/969743
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].

Audio Redirection and Remote Desktop Web Access

Similar Messages

Maybe you are looking for