Audio rendering problem, can't export- hundreds of hours, audio preview files hundreds of gigs

Hi,
I'm working on a feature doc and trying to render and export about 4 hours of material. Please advise.
Premiere Pro CC 8.2.0 (65) Build
Mac Pro 3.2 GHz Quad Core Intel
16GB 1066 MHz DDr3
OSX 10.8.5
The sequence is mixed media, this is a doc with numerous cameras and formats. Most of the footage is in multicam clips. I am able to play back OK and the video rendered in about 4 hours. Fine. But when I try and export audio, the process of generating preview files for export is unbelievably slow. I let it render for 4 hours and it got to 0.5% and created 350 gigs of preview files, larger than the picture files!!! There must be a problem with my settings or the software because this cannot be right. This is my first premiere project (after 10 years of FCP) and would greatly appreciate any advice.
I have tried:
cleaning the media cache
starting a new project with just the export sequence
restarting PPCC and the computer of course
rendering and exporting smaller sections of the timeline (ten minute chunks)
making a new sequence with multitrack audio instead of stereo playback. This allowed me to render the audio in about 1 hour- great! But when I tried to export (using an adobe preset for vimeo) it crashed. When I re-opened the project it is now back to saying it will take about 300 hours to render the same audio.
I've tried flattening the multicam, but this removes a large number of the audio files completely from the sequence. The selections I made in the multicam tracks in the sequence are not reflected in what is left of the flattened audio.

<<I'm speculating, but I doubt Apple would be able to provide Keynote so cheaply, or at all, if it were not for its successes in iPhones, iPods, and other major undertakings that require the full-time attention of its brightest and most dedicated people. >>
Good point. However, coupled with the fact that the Macintosh platform is more widely used for production of both audio and video in the entertainment industry than the "other" system, this cries-out the fact that audio is an important element of +some aspect+ of Apple's product focus.
Thus, it remains "a puzzlement" (to quote Oscar Hammerstein) that Apple has not paid more heed to the audio facilities and capabilities in Keynote - despite the long-time, repeated pleadings of many of us in this (and the Keynote Feedback) Forum.
Many of the problems that we are encountering and about which we are complaining have been known since the very first issue of Keynote. None has been addressed in subsequent releases. In fact, with respect to the problems of exporting Keynote presentations to other formats, some features have grown more problematic and less reliable - admittedly, not always as a function of Keynote (i.e. the problems with QuickTime).
As has been stated previously in this and other threads in this Forum, raging against Apple is futile and frustration is self-defeating. All we can do is continue to assist each other with "tips and tricks" in this Forum and to make our concerns known to Apple via the Keynote Feedback Forum.
Good luck to all.

Similar Messages

How can I export an Adobe illustrator CC .AI file to a DWG or DXF file suitable for SolidWorks?

Hi
Can anyone help?
How can I export an Adobe illustrator CC .AI file to a DWG or DXF file, without SolidWorks enlarging the file & converting every curve into hundreds of short little straight lines rather than a single continuous line/s.
I have made sure the file is ungrouped or has any compound paths or colours.
Opening it in Autocad 2010 still converts the DWG file into hundreds of short little straight lines!
The file is needed to laser cut out an aluminium shape using SolidWorks 2008 (Metal soft)?
Formats they can handle are:
DWG, DXF, IGES, IGA
There must be a way to export it without re-drawing the whole design in Soildworks again!!??
Can anyone help?
INCA

Not really. This is a limitation you will have to live with. Unless you are extremely careful, most paths will be converted to polyline segments by AI and in particular in AI CC this is somehow busted, so it happens more often. You might have much more luck opening a native AI file in DraftSight or a 2D CAD program like TurboCAD and exporting a DWG or 2D IGES/ STEP file from there. The sizing issue is a different matter, but without knowing what units you actualyl used, nobody can advise.
Mylenium

How can I export an edited image to a file?

I can't seem to find a way in iPhoto 09 do this. Can I export an edited image to a file, keeping the edits intact, or do I have to use a 3rd party editing app when I edit from inside iPhoto 09?
I would prefer to use iPhoto's editing tools so should I import previously cropped images into iPhoto? If yes, what file should I use? I was wondering if anyone does this on a regular basis and if there issues doing this.
I like the editing tools in iPhoto very much. In other apps I have always cropped, resized, corrected levels and a bit of color. I am not a power user by any means and I am close to doing this all in iPhoto if I could only export the edited image to a file.
The reason I want to do this is because the printing portion of my work flow is to upload files to my merchant who prints them and are ready for nearby pickup within an hour. This is all done at a very reasonable price and the color accuracy is very close.
Any advice would be greatly appreciated.
Regards,
Jim

You can edit from iPhoto by dragging to the desktop or exporting using the File -> Export command, setting the Kind to anything except original.
But you probably don’t need to:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Can i export without double quotes in data files?

How can i export without double quotes in data files using dataexport commands in MaxL?

I don't know of any way to do any formatting in a straight export out of Essbase. BSO lets you choose between a columnar vs. free form (really Essbase) format. That lack of formatting includes removing double quotes.
If you're willing to put up with the limitations (and formatting issues) of an MDX extract to a log file, that approach does not put double quotes around member names. The same is true in Report Scripts although I have a vague recollection that you can put in double quotes if you want it -- obviously you do not.
There are limitations to the above two approaches, the biggest being that they they are not as efficient as a true MaxL export. OTOH, you may want only part of a database to get exported out in which case either approach may be more to your needs.
If in fact you do want to do a full export, there are lots of OS-level ways of removing double quotes. Here's a Windows-based approach:
Removing double quotes in a batch program in Windows 2003 - Stack Overflow
What would life be without hacks like the above? Probably not worth living.
Regards,
Cameron Lackpour

How can I export a playlist (.m3u) to local file system?

How can I export my playlits to the local file sytem, e.g. in .m3u format. In iTunes 11 it was a simple click on "export" and choosing a file name, done. The button "export" is missing in iTunes 12.

File > Library > Export Playlist...
tt2

Premiere Pro CC rendering problems : can't see my medias anymore

Hello,
I started my first project on Premiere Pro CC, but it looks like PP CC isn't working well concerning rendering, I think I'm going to use my Premiere Pro CS6 again...
Sometimes, the rendering simply stops working : I can't see my output view anymore, only the "Media Pending". Removing media cache, rendering files, no effect. Closing the project and opening it again, still the same. Sometimes I can get the files back by selecting another rendering Engine, but after a few minutes, I loose my medias again.
I've seen the other post concerning preview files lost and the "empty sequence solution', but mine is different : I can't simply get the view back.
The other problem is that when I close PP CC, and try to launch it again, If first have to manually stop the PP CC process, which seems to be crashed as it doesn't completly stop.
Olivier

Ok, I just met a new problem, with the "unexpected MUTE" bug.
No need to answer my previous problem, I've decided to stop using Premiere Pro CC, which needs to be seriously fixed by Adobe teams. more than 60 euros per month for such a quality is a SHAME.
Let's switch back to PP CS6.

How can I export complex FRF data in ASCII files especially UFF58 format?

Background:
I have a problem saving analysed data into a format that another software program (MODENT) can import.
I am using "SVA_Impact TEST (DAQmx).seproj", to acquire force and acceleration signals from a SISO hammer model test, and process up to the stage of an FRF and coherence plot. I need to export the FRF information into MODENT, meaning it must contain both magnitude and phase (real and complex) information in one file. (MODENT does not need the coherence information, which is only really used during the testing process to know we have good test data. The coherence information can already easily be saved into ASCII text file, and kept for test records - not a problem).
MODENT is a speciaised modal analysis package, and the FRFs from tests can be imported into its processing environment using its "utilities". The standard is a UFF58 file containing the FRF information.
Labview does not seem to be able to export the FRF data in UFF58 format. In general, Labview can export to UFF58, but only the real information, not the complex information - is this correct?
Is there a way to export the real and complex information from FRFs using one file.
I am working on this problem from both ends:
1. MODENT support, to help interface into MODENT.
2. Lavbiew support, to try to generate an exported file format with all necessry analysed data.

Hi
Have a look at the "seproj" and "vi" versions I mentioned in this thread - both available from the supplied example VIs in Signal Express and Labview. I've also attached these here.
The "seproj"version has what are called "limits" for the input data, meaning it cheks certain criteria to make sure the test data sentfor analysis (to give the FRF) is wihin certain limits: 1. "overload" where the amplitude must be below a set maxiumum, 2. "time", where the signal must deacy to zero within the time envelope. These are useful test check functions to have.
I looked at the conversion from SE to Labview VIs, but if I understand correctly, this essenetially embeds the SEproject in Labview, but does not allow the same use of viewing of the user windows during testing (eg seeing the overload plots, editing the overload levels, etc)?
Other settings:
-signal input range, sensitivity, Iex source, Iex value, dB reference, No. of samples and sample rate.
-triggering off the hammer, with all the setting optons shown in step setup for "trigger"
-all settings associated with the load and time limits; presented in a very useful format of either defining by X,Y coordinates, or by scalling.
-all config and averaging options for the freqency response.
The practise envirnoment in the SEProj version is also useful, as getting the technique right for using the hammer is not always easy, and it allows a quick check of basic settingsbefore doing the actual tests.
The Nyquist plot in the VI version is useful.
Happy New Year to everyone !
Attachments:
SVA_Impact Test (DAQmx) demo.seproj ‏307 KB
SVXMPL_Impact Test (DAQmx).vi ‏75 KB

How can we export table data to a CSV file??

Hi,
I have the following requirement. Initially business agreed upon, exporting the table data to Excel file. But now, they would like to export the table data to a CSV file, which is not being supported by af:exportCollectionActionListener component.
Because, when i opened the exported CSV file, i can see the exported data sorrounded with HTML tags. Hence the issue.
Does someone has any solution for this ... Like, how can we export the table data to csv format. And it should work similar to exporting the data to excel sheet.
For youre reference here is the code which i have used to export the table data..
><f:facet name="menus">
><af:menu text="Menu" id="m1">
><af:commandMenuItem text="Print" id="cmi1">
><af:exportCollectionActionListener exportedId="t1"
>title="CommunicationDistributionList"
>filename="CommunicationDistributionList"
>type="excelHTML"/> ---- I tried with removing value for this attribute. With no value, it did not worked at all.
></af:commandMenuItem>
></af:menu>
></f:facet>
Thanks & Regards,
Kiran Konjeti

Hi Alex,
I have already visited that POST and it works only in 10g. Not in 11g.
I got the solution for this. The solution is :
Use the following code in jsff
==================
<af:commandButton text="Export Data" id="ctb1">><af:fileDownloadActionListener contentType="text/csv; charset=utf-8"
>filename="test.csv"
>method="#{pageFlowScope.pageFlowScopeDemoAppMB.test}"/>
></af:commandButton>
OR
<af:commandButton text="Export Data" id="ctb1">><af:fileDownloadActionListener contentType="application/vnd.ms-excel; charset=utf-8"
>filename="test.csv"
>method="#{pageFlowScope.pageFlowScopeDemoAppMB.test}"/>
></af:commandButton>
And place this code in ManagedBean
======================
> public void test(FacesContext facesContext, OutputStream outputStream) throws IOException {
> DCBindingContainer dcBindings = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
>DCIteratorBinding itrBinding = (DCIteratorBinding)dcBindings.get("fetchDataIterator");
>tableRows = itrBinding.getAllRowsInRange();
preparaing column headers
>PrintWriter out = new PrintWriter(outputStream);
>out.print(" ID");
>out.print(",");
>out.print("Name");
>out.print(",");
>out.print("Designation");
>out.print(",");
>out.print("Salary");
>out.println();
preparing column data
> for(Row row : tableRows){
>DCDataRow dataRow = (DCDataRow)row;
> DataLoaderDTO dto = (DataLoaderDTO)dataRow.getDataProvider();
>out.print(dto.getId());
>out.print(",");
>out.print(dto.getName());
>out.print(",");
>out.print(dto.getDesgntn());
>out.print(",");
>out.print(dto.getSalary());
>out.println();
>}
>out.flush();
>out.close();
> }
And do the following settings(*OPTIONAL*) for your browser - Only in case, if the file is being blocked by IE
==================================================================
http://ais-ss.usc.edu/helpdoc/main/browser/bris004b.html
This resolves implementation of exporting table data to CSV file in 11g.
Thanks & Regards,
Kiran Konjeti

Can't export as Html (Waiting for all files to be ready...)

Made a bunch of updates last night to a client site. Everything looks great except I can't export as Html. Had my sister try to export on her computer and we both get to 87%, then it permanently stalls, saying "Waiting for all files to be ready" (See screenshots). We've ensured that no files are open or being previewed. We've rebooted and tried saving to a different location, all with no change, we still get to the 87% mark and stop. Please help. I have a client waiting for this site update.
Details:
Windows 7
Sony Vaio
Muse Version - 4.1 Build 8 *see screenshot
****Update:
I can preview the entire site in a browser as well as preview each page individually, but cannot finish a html export past 87%.

Odd are if you wait long enough, potentially a few hours, it will complete.
This huge performance hit sounds exactly like a bug that's fixed for the Muse CC 5.0 release due out next week. Sorry for the inconvenience.

Wanted to know that can we export the Crystal report in .rtf file

Hi,
We are using your u201CCrystalu201D product version 8.5, We have a valid license .
Our license number is u201CA6A50-0910000-H410031.
We are facing some problem while creating the report.
We want to know that, do you have any functionality to export the report in .rtf format.
Because here we are not able to export the crystal report in .rtf file.
If this is possible then please help me.
Thanks in advance..
Thanks and Regards,
Abhineet

If this is a report creation question, post to the Report Design forum:
SAP Crystal Reports
Ludek

How can I see the path from the preview file (*.prel) to my video files ?

Because a lack of hard disk space I have moved my video files to another drive and therefore unfortunately destroyed the relative connection to the preview file (*.prel).
Therefore the videos are not to be seen in the preview file any more.
How can I get information about the relative path between the preview file and the place for the original video files so I can get those back in the original position ?
or:
It may be possible to change the path for every clip in my preview file - but how ?
I can read answers in English, German or Danish.

hansk
What version of Premiere Elements on what computer operating system?
Generalizing for now...
If you know where the files are by actually seeing them in their hard drive save location and you are getting "Where is the file ______?" messages, then you use those
messages to reconnect the source media to the project. Are you getting those messages and have you tried for the reconnects that way?
If edits are involved in the files that have become disconnected to the project, you can also consider the program's Replace Footage feature.
ATR Premiere Elements Troubleshooting: PE11: Replace Footage
Typically either of these ways is one at a time reconnects. With the "Where is the file _____?" message way sometimes you get lucky (depends on the circumstances) and more
than one file at a time might reconnect.
Please review and consider. Any questions or need clarification, please ask.
ATR

I can't export any video as an avi. file, any help or ideas?

I own Adobe Premiere Pro CS4 and after finishing up a video and rendering it I try to export it with unexpected results. After clicking 'Export', 'Media', I choose to export as a 'Microsoft AVI' file and no matter which settings I use I cannot get it to work. The Adobe Media Encoder starts but no file appears in the queue no matter how long I wait or how hard I try to fix the problem.
Does anybody have any ideas, help, or a solution to this problem?
Anything that can help will be greatly appreciated!

Welcome to the forum.
First, a couple of questions:
What is the upgraded version of CS4?
What OS and version are you using?
Do you have the MS AVI DV CODEC's installed on the system?
Good luck,
Hunt

How can I export a selection as premiere PROJECT FILE to edit in another project....?

Wondering if anyone else has come across this issue....I must of hit an awful evil key because for the third time deep into an edit I traced back to my intro to find most of the audio pulled a Houdini on me and disappeared.
I've been through a tough edit, it's not as simple to just go back into my bins and recollect the clips to create my intro.
Luckily I found the exact intro I need in an auto-saved project file. Copy and pasting obviously does not transfer through project file changes, there is an option to "Export as Premiere Project File" under File, however after marking specific in and out marks and even selecting all clips I want to export, my option tool remains gray and inaccessible.
I need to export these specific clips as a project file so I may import the file as a sequence to a larger project.
Help?
Thank you so much in advance for your time and feedback.

Have you tried importing the sequence through the Media Browser? To do so, browse to the backup of your project and double-click it. That will show you all the contents of the project. You can then drag the sequence into your working project.

I can not export my book as a PDF file, Why?

I'm having problem exporting my book as a PDF or JPEG file so I can set it to a client, please help me.

In case if the files are missing for the once you have in your book module they can have issues exporting as PDF or JPEG.
Please check the same and replace the files which are missing or attach the same and then try exporting the same.
-Mandhir

InDesign: How can I export indd pages to layered psd files?

I wish to create layered PSD files from the pages of InDesign marketing brochures so that they may be used as templates in Photoshop by photographers (or whomever) that neither possess nor understand how to use InDesign? I have seen offerings by other offering both an indd file and multiple psd files but I cant discern a simple way to make that happen. I am hoping to be able have it occur via a "click" -- convert indd to layered psd. Id doesn't not appear to allow PSD export. What is another method to do this? I'm on PC.

One way would be to export every Indesign layer as PDF and to assemble them again to a multi-layer PSD file.
But there is a also script that can do what you want. Unfortunately for you, it is for Mac only.

Audio rendering problem, can't export- hundreds of hours, audio preview files hundreds of gigs

Similar Messages

Maybe you are looking for